Dynamic and quasistatic trajectories in quasifission reactions and particle emission

We show that the quasifission paths predicted by the one-body dissipation dynamics, in the slowest phase of a binary reaction, follow a quasistatic path, which represents a sequence of states of thermal equilibrium at a fixed value of the deformation coordinate. This establishes the use of the statistical particle-evaporation model in the case of dynamical time-evolving systems. Pre- and post-scission multiplicities of neutrons and total multiplicities of protons and α particles in fission reactions of 63Cu+92Mo, 60Ni+100Mo, 63Cu+100Mo at 10 MeV/u and 20Ne+144,148,154Sm at 20 MeV/u are reproduced reasonably well with statistical model calculations performed along dynamic trajectories whose slow stage (from the most compact configuration up to the point where the neck starts to develop) lasts some 35×10−21 s.

Streptavidin - A Versatile Binding Protein for Solid-Phase Immunoassays

Streptavidin, a tetrameric protein secreted by Streptomyces avidinii, binds tightly to a small growth factor biotin. One of the numerous applications of this high-affinity system comprises the streptavidin-coated surfaces of bioanalytical assays which serve as universal binders for straightforward immobilization of any biotinylated molecule. Proteins can be immobilized with a lower risk of denaturation using streptavidin-biotin technology in contrast to direct passive adsorption. The purpose of this study was to characterize the properties and effects of streptavidin-coated binding surfaces on the performance of solid-phase immunoassays and to investigate the contributions of surface modifications. Various characterization tools and methods established in the study enabled the convenient monitoring and binding capacity determination of streptavidin-coated surfaces. The schematic modeling of the monolayer surface and the quantification of adsorbed streptavidin disclosed the possibilities and the limits of passive adsorption. The defined yield of 250 ng/cm² represented approximately 65 % coverage compared with a modelled complete monolayer, which is consistent with theoretical surface models. Modifications such as polymerization and chemical activation of streptavidin resulted in a close to 10-fold increase in the biotin-binding densities of the surface compared with the regular streptavidin coating. In addition, the stability of the surface against leaching was improved by chemical modification. The increased binding densities and capacities enabled wider high-end dynamic ranges in the solid-phase immunoassays, especially when using the fragments of the capture antibodies instead of intact antibodies for the binding of the antigen. The binding capacity of the streptavidin surface was not, by definition, predictive of the low-end performance of the immunoassays nor the assay sensitivity. Other features such as non-specific binding, variation and leaching turned out to be more relevant. The immunoassays that use a direct surface readout measurement of time-resolved fluorescence from a washed surface are dependent on the density of the labeled antibodies in a defined area on the surface. The binding surface was condensed into a spot by coating streptavidin in liquid droplets into special microtiter wells holding a small circular indentation at the bottom. The condensed binding area enabled a denser packing of the labeled antibodies on the surface. This resulted in a 5 - 6-fold increase in the signal-to-background ratios and an equivalent improvement in the detection limits of the solid-phase immunoassays. This work proved that the properties of the streptavidin-coated surfaces can be modified and that the defined properties of the streptavidin-based immunocapture surfaces contribute to the performance of heterogeneous immunoassays.

Determination of Rod and Cone Influence to the Early and Late Dynamic of the Pupillary Light Response.

PURPOSE: This study aims to identify which aspects of the pupil light reflex are most influenced by rods and cones independently by analyzing pupil recordings from different mouse models of photoreceptor deficiency. METHODS: One-month-old wild type (WT), rodless (Rho-/-), coneless (Cnga3-/-), or photoreceptor less (Cnga3-/-; Rho-/- or Gnat1-/-) mice were subjected to brief red and blue light stimuli of increasing intensity. To describe the initial dynamic response to light, the maximal pupillary constriction amplitudes and the derivative curve of the first 3 seconds were determined. To estimate the postillumination phase, the constriction amplitude at 9.5 seconds after light termination was related to the maximal constriction amplitude. RESULTS: Rho-/- mice showed decreased constriction amplitude but more prolonged pupilloconstriction to all blue and red light stimuli compared to wild type mice. Cnga3-/- mice had constriction amplitudes similar to WT however following maximal constriction, the early and rapid dilation to low intensity blue light was decreased. To high intensity blue light, the Cnga3-/- mice demonstrated marked prolongation of the pupillary constriction. Cnga3-/-; Rho-/- mice had no pupil response to red light of low and medium intensity. CONCLUSIONS: From specific gene defective mouse models which selectively voided the rod or cone function, we determined that mouse rod photoreceptors are highly contributing to the pupil response to blue light stimuli but also to low and medium red stimuli. We also observed that cone cells mainly drive the partial rapid dilation of the initial response to low blue light stimuli. Thus photoreceptor dysfunction can be derived from chromatic pupillometry in mouse models.

Phase diagram and complex patterns in the modeling of the bromate-oxalic acid-Ce-acetone oscillating reaction

Simulations have been carried out on the bromate - oxalic acid - Ce(IV) - acetone oscillating reaction, under flow conditions, using Field and Boyd's model (J. Phys. Chem. 1985, 89, 3707). Many different complex dynamic behaviors were found, including simple periodic oscillations, complex periodic oscillations, quasiperiodicity and chaos. Some of these complex oscillations can be understood as belonging to a Farey sequence. The many different behaviors were systematized in a phase diagram which shows that some regions of complex patterns were nested with one inside the other. The existence of almost all known dynamic behavior for this system allows the suggestion that it can be used as a model for some very complex phenomena that occur in biological systems.

The effectiveness of short-term literacy skills intervention on children at risk of reading and writing difficulties in Tanzania : a study of grade one children with dynamic assessment approach

The aim of the study was to create and evaluate an intervention programme for Tanzanian children from a low-income area who are at risk of reading and writing difficulties. The learning difficulties, including reading and writing difficulties, are likely to be behind many of the common school problems in Tanzania, but they are not well understood, and research is needed. The design of the study included an identification and intervention phase with follow-up. A group based dynamic assessment approach was used in identifying children at risk of difficulties in reading and writing. The same approach was used in the intervention. The study was a randomized experiment with one experimental and two control groups. For the experimental and the control groups, a total of 96 (46 girls and 50 boys) children from grade one were screened out of 301 children from two schools in a low income urban area of Dar-es-Salaam. One third of the children, the experimental group, participated in an intensive training programme in literacy skills for five weeks, six hours per week, aimed at promoting reading and writing ability, while the children in the control groups had a mathematics and art programme. Follow-up was performed five months after the intervention. The intervention programme and the tests were based on the Zambian BASAT (Basic Skill Assessment Tool, Ketonen & Mulenga, 2003), but the content was drawn from the Kiswahili school curriculum in Tanzania. The main components of the training and testing programme were the same, only differing in content. The training process was different from traditional training in Tanzanian schools in that principles of teaching and training in dynamic assessment were followed. Feedback was the cornerstone of the training and the focus was on supporting the children in exploring knowledge and strategies in performing the tasks. The experimental group improved significantly more (p = .000) than the control groups during the intervention from pre-test to follow-up (repeated measures ANOVA). No differences between the control groups were noticed. The effect was significant on all the measures: phonological awareness, reading skills, writing skills and overall literacy skills. A transfer effect on school marks in Kiswahili and English was found. Following a discussion of the results, suggestions for further research and adaptation of the programme are presented.

Auger-type granular fertylizer distributor: matemathical model and dynamic simulation

The objective of this study was to model mathematically and to simulate the dynamic behavior of an auger-type fertilizer applicator (AFA) in order to use the variable-rate application (VRA) and reduce the coefficient of variation (CV) of the application, proposing an angular speed controller θ' for the motor drive shaft. The input model was θ' and the response was the fertilizer mass flow, due to the construction, density of fertilizer, fill factor and the end position of the auger. The model was used to simulate a control system in open loop, with an electric drive for AFA using an armature voltage (V A) controller. By introducing a sinusoidal excitation signal in V A with amplitude and delay phase optimized and varying θ' during an operation cycle, it is obtained a reduction of 29.8% in the CV (constant V A) to 11.4%. The development of the mathematical model was a first step towards the introduction of electric drive systems and closed loop control for the implementation of AFA with low CV in VRA.

Fluid dynamic modelling and simulation of circulating fluidized bed reactors: importance of the interface turbulence transfer

The main objective of this work is to analyze the importance of the gas-solid interface transfer of the kinetic energy of the turbulent motion on the accuracy of prediction of the fluid dynamic of Circulating Fluidized Bed (CFB) reactors. CFB reactors are used in a variety of industrial applications related to combustion, incineration and catalytic cracking. In this work a two-dimensional fluid dynamic model for gas-particle flow has been used to compute the porosity, the pressure, and the velocity fields of both phases in 2-D axisymmetrical cylindrical co-ordinates. The fluid dynamic model is based on the two fluid model approach in which both phases are considered to be continuous and fully interpenetrating. CFB processes are essentially turbulent. The model of effective stress on each phase is that of a Newtonian fluid, where the effective gas viscosity was calculated from the standard k-epsilon turbulence model and the transport coefficients of the particulate phase were calculated from the kinetic theory of granular flow (KTGF). This work shows that the turbulence transfer between the phases is very important for a better representation of the fluid dynamics of CFB reactors, especially for systems with internal recirculation and high gradients of particle concentration. Two systems with different characteristics were analyzed. The results were compared with experimental data available in the literature. The results were obtained by using a computer code developed by the authors. The finite volume method with collocated grid, the hybrid interpolation scheme, the false time step strategy and SIMPLEC (Semi-Implicit Method for Pressure Linked Equations - Consistent) algorithm were used to obtain the numerical solution.

Dynamic carbon dioxide liquidization model

In literature CO 2 liquidization is well studied with steady state modeling. Steady state modeling gives an overview of the process but it doesn’t give information about process behavior during transients. In this master’s thesis three dynamic models of CO2 liquidization were made and tested. Models were straight multi-stage compression model and two compression liquid pumping models, one with and one without cold energy recovery. Models were made with Apros software, models were also used to verify that Apros is capable to model phase changes and over critical state of CO 2. Models were verified against compressor manufacturer’s data and simulation results presented in literature. From the models made in this thesis, straight compression model was found to be the most energy efficient and fastest to react to transients. Also Apros was found to be capable tool for dynamic liquidization modeling.

Analysis of Phase Separator Design Criteria Using Computational Fluid Dynamics

Gravitational phase separation is a common unit operation found in most large-scale chemical processes. The need for phase separation can arise e.g. from product purification or protection of downstream equipment. In gravitational phase separation, the phases separate without the application of an external force. This is achieved in vessels where the flow velocity is lowered substantially compared to pipe flow. If the velocity is low enough, the denser phase settles towards the bottom of the vessel while the lighter phase rises. To find optimal configurations for gravitational phase separator vessels, several different geometrical and internal design features were evaluated based on simulations using OpenFOAM computational fluid dynamics (CFD) software. The studied features included inlet distributors, vessel dimensions, demister configurations and gas phase outlet configurations. Simulations were conducted as single phase steady state calculations. For comparison, additional simulations were performed as dynamic single and two-phase calculations. The steady state single phase calculations provided indications on preferred configurations for most above mentioned features. The results of the dynamic simulations supported the utilization of the computationally faster steady state model as a practical engineering tool. However, the two-phase model provides more truthful results especially with flows where a single phase does not determine the flow characteristics.

Internal Changes in International New Ventures During Initial Internationalization: Finnish SMEs Operating in Dynamic High-tech Industries

The purpose of this qualitative research is to study how international new ventures change internally during initial internationalization. Based on the analysis of seven INV firms, a framework illustrating this change process, will be developed. This research will also develop earlier theories, and create a solid combination of existing theories to explain the phenomenon. INV firms internationalize more rapidly and aggressively than traditional MNEs. At the same, external and internal drivers cause changes in INVs culture, resources, capabilities, strategic management, and output decisions inside the company. Organizational learning and resource acquisition through international business networks explain how INVs are able to cope with the dynamic high-technology industry and be able to adapt. Internationalization of INVs proceeds through several phases, which may be gone through rapidly due to the network effects and INVs’ special characteristics. The results of this research revealed that INVs internal change process proceeds through four phases; pre-incorporation phase, product development phase, internationalization and growth phase, and maturation phase. INVs culture, resources, capabilities, strategic management, and outputs change significantly during initial internationalization, and INVs develop from small start-ups into fully established companies.

Dynamic modeling and simulation of the airflow cleaning device

The objective of the work is to study the flow behavior and to support the design of air cleaner by dynamic simulation.In a paper printing industry, it is necessary to monitor the quality of paper when the paper is being produced. During the production, the quality of the paper can be monitored by camera. Therefore, it is necessary to keep the camera lens clean as wood particles may fall from the paper and lie on the camera lens. In this work, the behavior of the air flow and effect of the airflow on the particles at different inlet angles are simulated. Geometries of a different inlet angles of single-channel and double-channel case were constructed using ANSYS CFD Software. All the simulations were performed in ANSYS Fluent. The simulation results of single-channel and double-channel case revealed significant differences in the behavior of the flow and the particle velocity. The main conclusion from this work are in following. 1) For the single channel case the best angle was 0 degree because in that case, the air flow can keep 60% of the particles away from the lens which would otherwise stay on lens. 2) For the double channel case, the best solution was found when the angle of the first inlet was 0 degree and the angle of second inlet was 45 degree . In that case, the airflow can keep 91% of particles away from the lens which would otherwise stay on lens.

Dynamic capabilities as enablers of value co-creation between an MBA school and its students

This study presents an understanding of how a U.S. based, international MBA school has been able to achieve competitive advantage within a relatively short period of time. A framework is built to comprehend how the dynamic capability and value co-creation theories are connected and to understand how the dynamic capabilities have enabled value co-creation to happen between the school and its students, leading to such competitive advantage for the school. The data collection method followed a qualitative single-case study with a process perspective. Seven semi-structured interviews were made in September and October of 2015; one current employee of the MBA school was interviewed, with the other six being graduates and/or former employees of the MBA school. In addition, the researcher has worked as a recruiter at the MBA school, enabling to build bridges and a coherent whole of the empirical findings. Data analysis was conducted by first identifying themes from interviews, after which a narrative was written and a causal network model was built. Thus, a combination of thematic analysis, narrative and grounded theory were used as data analysis methods. This study finds that value co-creation is enabled by the dynamic capabilities of the MBA school; also capabilities would not be dynamic if value co-creation did not take place. Thus, this study presents that even though the two theories represent different level analyses, they are intertwined and together they can help to explain competitive advantage. The MBA case school’s dynamic capabilities are identified to be the sales & marketing capabilities and international market creation capabilities, thus the study finds that the MBA school does not only co-create value with existing students (customers) in the school setting, but instead, most of the value co-creation happens between the school and the student cohorts (network) already in the recruiting phase. Therefore, as a theoretical implication, the network should be considered as part of the context. The main value created seem to lie in the MBA case school’s international setting & networks. MBA schools around the world can learn from this study; schools should try to find their own niche and specialize, based on their own values and capabilities. With a differentiating focus and a unique and practical content, the schools can and should be well-marketed and proactively sold in order to receive more student applications and enhance competitive advantage. Even though an MBA school can effectively be treated as a business, as the study shows, the main emphasis should still be on providing quality education. Good content with efficient marketing can be the winning combination for an MBA school.

La relation texte/scène en phase de reconfiguration : propositions théoriques autour de Terre océane de Daniel Danis

Avec la publication du «Théâtre postdramatique» d’Hans-Thies Lehmann et la montée de la performance dans la représentation théâtrale contemporaine, le drame, et avec lui le texte dramatique, semblent une fois de plus mis à mal. Or, la propension de certains ouvrages critiques à présenter comme cataclysmique l’avènement d’un théâtre postdramatique laisse en plan de nombreuses questions, notamment celle de la dynamique texte/scène qui, plutôt que d’en évacuer la première constituante, semble en métamorphoser les deux parties. Ce mémoire entend creuser la question du texte au sein de cette dynamique afin d’interroger ses mutations et les techniques d’approche qui permettent de l’intégrer dans une praxis théâtrale.

Dynamic magnetic resonance spectroscopy of phosphate energetics during muscle exercise and recovery

Entailing of phosphorus exchanges in most bio-chemicals as a key factor in disease, increases researcher’s interest to develop the technologies capable of detecting this metabolite. Phosphorus magnetic resonance spectroscopy is able to detect key metabolites in a non-invasive manner. Particularly, it offers the ability to measure the dynamic rate of phosphocreatine(PCr) degeneration through the exercise and recovery. This metric as a valid indication of mitochondrial oxidative metabolism in muscle, differentiate between normal and pathological state. To do magnetic resonance imaging and spectroscopy, clinical research tools provide a wide variety of anatomical and functional contrasts, however they are typically restricted to the tissues containing water or hydrogen atoms and they are still blind to the biochemicals of other atoms of interests. Through this project we intended to obtain the phosphorus spectrum in human body – specificadenerativelly in muscle – using 31P spectroscopy. To do so a double loop RF surface coil, tuned to phosphorus frequency, is designed and fabricated using bench work facilities and then validated through in vitro spectroscopy using 3 Tesla Siemens scanner. We acquired in vitro as well as in vivo phosphorus spectrum in a 100 mM potassium phosphate phantom and human calf muscle in rest-exercise-recovery phase in a 3T MR scanner. The spectrum demonstrates the main constituent in high-energy phosphate metabolism. We also observed the dynamic variation of PCr for five young healthy subjects who performed planter flexions using resistance band during exercise and recovery. The took steps in this project pave the way for future application of spectroscopic quantification of phosphate metabolism in patients affected by carotid artery disease as well as in age-matched control subjects.

On the dynamic effects of fiscal policy

Dans le sillage de la récession mondiale de 2008-09, plusieurs questions ont été soulevées dans la littérature économique sur les effets à court et à long terme de la politique budgétaire sur l’activité économique par rapport à son signe, sa taille et sa durée. Ceux-ci ont des implications importantes pour mieux comprendre les canaux de transmission et l’efficacité des politiques budgétaires, avec la politique monétaire étant poursuivi, ainsi que pour leurs retombées économiques. Cette thèse fait partie de ce regain d’intérêt de la littérature d’examiner comment les changements dans la politique budgétaire affectent l’activité économique. Elle repose alors sur trois essais: les effets macroéconomiques des chocs de dépenses publiques et des recettes fiscales, les résultats macroéconomiques de l’interaction entre les politiques budgétaire et monétaire et le lien entre la politique budgétaire et la répartition des revenus. Le premier chapitre examine les effets des chocs de politique budgétaire (chocs de dépenses publiques et chocs de recettes fiscales) sur l’économie canadienne au cours de la période 1970-2010, en s’appuyant sur la méthode d’identification des restrictions de signe développée par Mountford et Uhlig [2009]. En réponse à la récession mondiale, les autorités fiscales dans les économies avancées, dont le Canada ont généralement mis en oeuvre une approche en deux phases pour la politique budgétaire. Tout d’abord, ils ont introduit des plans de relance sans précédent pour relancer leurs économies. Par exemple, les mesures de relance au Canada, introduites à travers le Plan d’action économique du Canada, ont été projetées à 3.2 pour cent du PIB dans le budget fédéral de 2009 tandis que l’ "American Recovery and Reinvestment Act"(ARRA) a été estimé à 7 pour cent du PIB. Par la suite, ils ont mis en place des plans d’ajustement en vue de réduire la dette publique et en assurer la soutenabilité à long terme. Dans ce contexte, évaluer les effets multiplicateurs de la politique budgétaire est important en vue d’informer sur l'efficacité de telles mesures dans la relance ou non de l'activité économique. Les résultats montrent que les multiplicateurs d'impôt varient entre 0.2 et 0.5, tandis que les multiplicateurs de dépenses varient entre 0.2 et 1.1. Les multiplicateurs des dépenses ont tendance à être plus grand que les multiplicateurs des recettes fiscales au cours des deux dernières décennies. Comme implications de politique économique, ces résultats tendent à suggérer que les ajustements budgétaires par le biais de grandes réductions de dépenses publiques pourraient être plus dommageable pour l'économie que des ajustements budgétaires par la hausse des impôts. Le deuxième chapitre, co-écrit avec Constant Lonkeng Ngouana, estime les effets multiplicateurs des dépenses publiques aux Etats-Unis en fonction du cycle de la politique monétaire. Les chocs de dépenses publiques sont identifiés comme étant des erreurs de prévision du taux de croissance des dépenses publiques à partir des données d'Enquêtes des prévisionnistes professionnels et des informations contenues dans le "Greenbook". L'état de la politique monétaire est déduite à partir de la déviation du taux des fonds fédéraux du taux cible de la Réserve Fédérale, en faisant recours à une fonction lisse de transition. L'application de la méthode des «projections locales» aux données trimestrielles américaines au cours de la période 1965-2012 suggère que les effets multiplicateurs des dépenses fédérales sont sensiblement plus élevées quand la politique monétaire est accommodante que lorsqu'elle ne l'est pas. Les résultats suggèrent aussi que les dépenses fédérales peuvent stimuler ou non la consommation privée, dépendamment du degré d’accommodation de la politique monétaire. Ce dernier résultat réconcilie ainsi, sur la base d’un cadre unifié des résultats autrement contradictoires à première vue dans la littérature. Ces résultats ont d'importantes implications de politique économique. Ils suggèrent globalement que la politique budgétaire est plus efficace lorsqu'on en a le plus besoin (par exemple, lorsque le taux de chômage est élevé), si elle est soutenue par la politique monétaire. Ils ont également des implications pour la normalisation des conditions monétaires dans les pays avancés: la sortie des politiques monétaires non-conventionnelles conduirait à des multiplicateurs de dépenses fédérales beaucoup plus faibles qu'autrement, même si le niveau de chômage restait élevé. Ceci renforce la nécessité d'une calibration prudente du calendrier de sortie des politiques monétaires non-conventionnelles. Le troisième chapitre examine l'impact des mesures d'expansion et de contraction budgétaire sur la distribution des revenus dans un panel de 18 pays d'Amérique latine au cours de la période 1990-2010, avec un accent sur les deniers 40 pour cent. Il explore alors comment ces mesures fiscales ainsi que leur composition affectent la croissance des revenus des dernier 40 pour cent, la croissance de leur part de revenu ainsi que la croissance économique. Les mesures d'expansion et de contraction budgétaire sont identifiées par des périodes au cours desquels il existe une variation significative du déficit primaire corrigé des variations conjoncturelles en pourcentage du PIB. Les résultats montrent qu'en moyenne l'expansion budgétaire par la hausse des dépenses publiques est plus favorable à la croissance des revenus des moins bien-nantis que celle par la baisse des impôts. Ce résultat est principalement soutenu par la hausse des dépenses gouvernementales de consommation courante, les transferts et subventions. En outre ces mesures d’expansion budgétaire sont favorables à la réduction des inégalités car elles permettent d'améliorer la part des revenus des moins bien-nantis tout en réduisant la part des revenus des mieux-nantis de la distribution des revenus. En outre ces mesures d’expansion budgétaire sont favorables à la réduction des inégalités car elles permettent d'améliorer la part des revenus des moins bien-nantis tout en réduisant la part des revenus des mieux-nantis de la distribution des revenus. Cependant, l'expansion budgétaire pourrait soit n'avoir aucun effet sur la croissance économique ou entraver cette dernière à travers la hausse des dépenses en capital. Les résultats relatifs à la contraction budgétaire sont quelque peu mitigés. Parfois, les mesures de contraction budgétaire sont associées à une baisse de la croissance des revenus des moins bien nantis et à une hausse des inégalités, parfois l'impact de ces mesures est non significatif. Par ailleurs, aucune des mesures n’affecte de manière significative la croissance du PIB. Comme implications de politique économique, les pays avec une certaine marge de manœuvre budgétaire pourraient entamer ou continuer à mettre en œuvre des programmes de "filets de sauvetage"--par exemple les programmes de transfert monétaire conditionnel--permettant aux segments vulnérables de la population de faire face à des chocs négatifs et aussi d'améliorer leur conditions de vie. Avec un potentiel de stimuler l'emploi peu qualifié, une relance budgétaire sage par les dépenses publique courantes pourrait également jouer un rôle important pour la réduction des inégalités. Aussi, pour éviter que les dépenses en capital freinent la croissance économique, les projets d'investissements publics efficients devraient être prioritaires dans le processus d'élaboration des politiques. Ce qui passe par la mise en œuvre des projets d'investissement avec une productivité plus élevée capable de générer la croissance économique nécessaire pour réduire les inégalités.