Phase voltage control and filtering in a converter-fed single-phase customer-end system of the LVDC distribution network

In recent years, the network vulnerability to natural hazards has been noticed. Moreover, operating on the limits of the network transmission capabilities have resulted in major outages during the past decade. One of the reasons for operating on these limits is that the network has become outdated. Therefore, new technical solutions are studied that could provide more reliable and more energy efficient power distributionand also a better profitability for the network owner. It is the development and price of power electronics that have made the DC distribution an attractive alternative again. In this doctoral thesis, one type of a low-voltage DC distribution system is investigated. Morespecifically, it is studied which current technological solutions, used at the customer-end, could provide better power quality for the customer when compared with the current system. To study the effect of a DC network on the customer-end power quality, a bipolar DC network model is derived. The model can also be used to identify the supply parameters when the V/kW ratio is approximately known. Although the model provides knowledge of the average behavior, it is shown that the instantaneous DC voltage ripple should be limited. The guidelines to choose an appropriate capacitance value for the capacitor located at the input DC terminals of the customer-end are given. Also the structure of the customer-end is considered. A comparison between the most common solutions is made based on their cost, energy efficiency, and reliability. In the comparison, special attention is paid to the passive filtering solutions since the filter is considered a crucial element when the lifetime expenses are determined. It is found out that the filter topology most commonly used today, namely the LC filter, does not provide economical advantage over the hybrid filter structure. Finally, some of the typical control system solutions are introduced and their shortcomings are presented. As a solution to the customer-end voltage regulation problem, an observer-based control scheme is proposed. It is shown how different control system structures affect the performance. The performance meeting the requirements is achieved by using only one output measurement, when operating in a rigid network. Similar performance can be achieved in a weak grid by DC voltage measurement. An additional improvement can be achieved when an adaptive gain scheduling-based control is introduced. As a conclusion, the final power quality is determined by a sum of various factors, and the thesis provides the guidelines for designing the system that improves the power quality experienced by the customer.

Customer loyalty in DIY retailing in Russia: Innovative approaches for improving customer retention through technology

Customer satisfaction has been widely studied concept due to its importance on business performance. Customer satisfaction should ideally lead to customer loyalty and have a positive effect on business profitability and growth. This study investigates customer satisfaction and loyalty in the Do-It-Yourself retailing in Russian  market.  “K-rauta”  retail  chain  was  chosen  as  a  focus company for this study. Goal of the study was to investigate what creates customer satisfaction in this given market and what is the role of quality, trust and satisfaction for creating customer loyalty. The role of internet in consumer purchasing process was also investigated. Furthermore, consumer preferences towards new marketing solutions such as smart phone applications were briefly examined.

Toimintolaskennan hyödyntäminen kalustealan yrityksessä

Tämän tutkimuksen tavoitteena oli laatia kohdeyrityksen käyttöön toimintolaskentamalli, joka käsittää yrityksen kahden tehtaan kaikki tuotantolinjat. Toimintolaskennan ohella tarkasteltiin myös kapeikkoajattelun tuomia näkökulmia yrityksen toiminnan kannattavuuden analysointiin. Tutkimuksen kohdeyritys toimii kiintokalustealalla ja sijoittuu kooltaan PK-luokkaan. Diplomityö koostuu kahdesta osasta; kirjallisuuden pohjalta laaditusta teoriatutkimuksesta sekä teorian pohjalta konstruktiivisesti muodostetusta empiirisestä osuudesta, jossa rakennetaan toimintolaskentamalli kohdeyrityksen käyttöön. Tutkimuksen teoriaosa käsittelee erityisesti toimintolaskennan rakennetta sekä laskentamallin luomista. Lisäksi teoriaosassa käsitellään myös kapeikkoajattelun mukaiset laskentamallit yrityksen toiminnan kannattavuuteen. Empiirisessä osassa laaditaan teoriaan perustuva toimintolaskentamalli yrityksen tuotantolinjoista. Tutkimuksen tuloksena laadittu yrityksen tietojärjestelmistä saatuihin tietoihin pohjautuva laskentamalli käsittää tuotantotoiminnan resurssit, resurssiajurit, toiminnot, toimintoajurit sekä laskentamallin laskentakohteet. Laskentamalli huomioi myös kapeikkoajattelun näkökulmat kapeikon hyödyntämisen maksimoinnista. Yritys voi käyttää laadittua laskentamallia toiminnan analysointiin kannattavuutta tuote-, tuoteryhmä-, toiminto-, tuotantolinja-, asiakas-, ja asiakasryhmätasoilla. Tulosten pohjalta voidaan päätellä toimintolaskennan ja kapeikkolaskennan tuovan käyttökelpoisia tuloksia, joita voidaan käyttää toiminnan tehostamisessa ja tuotehinnoittelussa päätöksenteon tukena.

Effects of life cycle profits on the profitability of industrial heavy duty cranes

The goal of the thesis was to investigate how much after-sales profits a crane sale generates over the life cycle of the crane and the effects of these after-sales profits on the overall profitability of the crane. The thesis utilizes theories about life cycle costing from an equipment and service supplier’s point of view. However, instead of costs, the thesis is focused on the life cycle after-sales profits from maintenance services and spare parts provided for the sold crane. The case study approach was chosen and a total of five cranes from three different segments were investigated. An eight-step life cycle profit calculation model was developed in order to analyze the chosen cases’ life cycle profits systematically. The results of the investigation suggest that the life cycle after-sales profits are significant in value. In the case analyses they accounted for between 20% and 44% of the overall life cycle profits of the case cranes. The after-sales profits should be taken into account already in the pricing when offering a crane to a customer.

Influencia de la relación estratégica comunitaria y el marketing en la salud financiera de las organizaciones en mercados internacionales

La globalización de mercados ha generado una serie de cambios en la estructura del comercio internacional, como el surgimiento de áreas de libre comercio, que son el resultado de las integraciones económicas, las cuales han facilitado los flujos de capital, recursos y personas. La internacionalización no solamente se ha convertido en una estrategia para aprovechar las oportunidades que se dan en los mercados internacionales, sino también en un medio de diversificación del riesgo para reducir la dependencia del mercado doméstico. Sin embargo, para emprender un proceso de internacionalización, es necesario conocer muy bien el contexto dentro del cual se desarrollan los clientes, puesto que la falta de conocimiento del entorno puede perjudicar la salud financiera de la empresa. De ahí la importancia de utilizar una definición de comunidad y unas estrategias comunitarias con las cuales se identifiquen las necesidades, objetivos e intereses de la comunidad, para establecer un relación a largo plazo que procure el desarrollo de ambas partes. La relación estratégica comunitaria y el marketing impactan positivamente la salud financiera de la empresa, en la medida en que este desarrollo mutuo, tanto de la comunidad como de la empresa, no solamente incrementa el interés y el compromiso por seguir interactuando; también crea vínculos afectivos entre ambas partes, lo cual consolida aún más la perdurabilidad de la relación, logrando así una fidelización de los clientes y por ende aumentando la rentabilidad de la empresa.

Utilização de indicadores financeiros e não-financeiros na gestão de hotéis no Rio Grande do Norte: um estudo sob a ótica do Balanced Scorecard

This study presents the results of a research on the use of financial and non-financial performance indicators used by medium and large hotels. The research was conducted in Rio Grande do Norte, a Brazilian State. The objective is to identify the usage of performance measures by these companies. Hotel industry is one of the most important sectors in the Rio Grande do Norte economy. The research takes the Balanced Scorecard as a conceptual framework, since it represents an original contribution to the literature of managerial accounting, for rethinking old issues, pointing out themes that were forgotten or badly interpreted, to discuss the requirements imposed by the economy environment, dominated by competitive companies, and increasing the understanding of the relationship between strategy and operation. The objective of the research is to investigate if the hotel managers make use of a managerial information system or not, when evaluating the performance of their business unit. The research reveals the usage of performance evaluation using a large variety of measures. Among them is worth mention: the usage of accounting profit altogether with the EVA/MVA, the process cycle time, total quality management, process transformation, strategic mission, vision, strategic measures, measures related to feedback, risk, costs, productivity, incomes, customers retention, customer satisfaction and profitability, measures using time as a component, quality of the process, cost of the processes, employees capabilities, information systems, motivation, empowerment and alignment. The research leads to the conclusion that the usage of the deriving concepts of Balanced Scorecard can improve the performance measurement systems used by hotels

Auto component supply chain: a path to global India

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to maximize total profitability.’ After 1950, supply chain management got a boost with the production and manufacturing sector getting highest attention. The inventory became the responsibility of the marketing, accounting and production areas. Order processing was part of accounting and sales. Supply chain management became one of the most powerful engines of business transformation. It is the one area where operational efficiency can be gained. It reduces organizations costs and enhances customer service. With the liberalization of world trade, globalization, and emergence of the new markets, many organizations have customers and competitions throughout the world, either directly or indirectly. Business communities are aware that global competitiveness is the key to the success of a business. Competitiveness is ability to produce, distribute and provide products and services for the open market in competition with others. The supply chain, a critical link between supplier, producer and customer is emerged now as an essential business process and a strategic lever, potential value contributor a differentiator for the success of any business. Supply chain management is the management of all internal and external processes or functions to satisfy a customer’s order (from raw materials through conversion and manufacture through logistics delivery.). Goods-either in raw form or processed, whole sale or retailed distribution, business or technology services, in everyday life- in the business or household- directly or indirectly supply chain is ubiquitously associated in expanding socio-economic development. Supply chain growth competitive performance and supporting strong growth impulse at micro as well as micro economic levels. Keeping the India vision at the core of the objective, the role of supply chain is to take up social economic challenges, improve competitive advantages, develop strategies, built capabilities, enhance value propositions, adapt right technology, collaborate with stakeholders and deliver environmentally sustainable outcomes with minimum resources.

Statement of Johnny C. Finch, Senior Associate Director, General Government Division, before the Consumer Subcommittee, Committee on Commerce, Science, and Transportation, United States Senate, on profitability of the property/casualty insurance industry.

Mode of access: Internet.

Postal service : labor-management relations and customer services at the Simi Valley, California, post office : report to the Chairman, Committee on Post Office and Civil Service, House of Representatives /

"B-226092"--P. 1.

Characteristics of UK firms related to timing of adoption of Statement of Standard Accounting Practice No. 20

This study examines whether the timing of adoption of the UK Statement of Standard Accounting Practice No. 20 'Foreign Currency Translation' depended on firms' financial characteristics. Consistent with US studies, we find that early adopters tended to be larger firms, and that variables, such as growth options, profitability, leverage and management payout, have strong predictive power. In general, the decision to adopt the Statement of Standard Accounting Practice No. 20 did not appear to adversely affect the profitability measures or dividend payout. Firms tended to adopt when the adverse economic consequences of the adoption were likely to be minimal. They also appeared to defer the adoption of the standard to influence their financial performance and, hence, to achieve certain corporate financial objectives. © 2006 AFAANZ.

Development of ``HealthServe'': A measure of customer service orientation in healthcare

An assessment tool designed to measure a customer service orientation among RN's and LPN's was developed using a content-oriented approach. Critical incidents were first developed by asking two samples of healthcare managers (n = 52 and 25) to identify various customer-contact situations. The critical incidents were then used to formulate a 121-item instrument. Patient-contact workers from 3 hospitals (n = 102) completed the instrument along with the NEO-FFI, a measure of the Big Five personality factors. Concurrently, managers completed a performance evaluation scale on the employees participating in the study in order to determine the predictive validity of the instrument.^ Through a criterion-keying approach, the instrument was scaled down to 38 items. The correlation between HealthServe and the supervisory ratings of performance evaluation data supported the instrument's criterion-related validity (r =.66, p $<$.0001). Incremental validity of HealthServe over the Big Five was found with HealthServe accounting for 46% of the variance.^ The NEO-FFI was used to assess the correlation between personality traits and HealthServe. A factor analysis of HealthServe suggested 4 factors which were correlated with the NEO-FFI scores. Results indicated that HealthServe was related to Extraversion, Openness to Experience, Agreeableness, Conscientiousness and negatively related to Neuroticism.^ The benefits of the test construction procedure used here over the use of broad-based measures of personality were discussed as well as the limitations of using a concurrent validation strategy. Recommendations for future studies were provided. ^

Customer relationship management: A content analysis of issues and best practices

This dissertation is a study of customer relationship management theory and practice. Customer Relationship Management (CRM) is a business strategy whereby companies build strong relationships with existing and prospective customers with the goal of increasing organizational profitability. It is also a learning process involving managing change in processes, people, and technology. CRM implementation and its ramifications are also not completely understood as evidenced by the high number of failures in CRM implementation in organizations and the resulting disappointments. ^ The goal of this dissertation is to study emerging issues and trends in CRM, including the effect of computer software and the accompanying new management processes on organizations, and the dynamics of the alignment of marketing, sales and services, and all other functions responsible for delivering customers a satisfying experience. ^ In order to understand CRM better a content analysis of more than a hundred articles and documents from academic and industry sources was undertaken using a new methodological twist to the traditional method. An Internet domain name (http://crm.fiu.edu) was created for the purpose of this research by uploading an initial one hundred plus abstracts of articles and documents onto it to form a knowledge database. Once the database was formed a search engine was developed to enable the search of abstracts using relevant CRM keywords to reveal emergent dominant CRM topics. The ultimate aim of this website is to serve as an information hub for CRM research, as well as a search engine where interested parties can enter CRM-relevant keywords or phrases to access abstracts, as well as submit abstracts to enrich the knowledge hub. ^ Research questions were investigated and answered by content analyzing the interpretation and discussion of dominant CRM topics and then amalgamating the findings. This was supported by comparisons within and across individual, paired, and sets-of-three occurrences of CRM keywords in the article abstracts. ^ Results show that there is a lack of holistic thinking and discussion of CRM in both academics and industry which is required to understand how the people, process, and technology in CRM impact each other to affect successful implementation. Industry has to get their heads around CRM and holistically understand how these important dimensions affect each other. Only then will organizational learning occur, and overtime result in superior processes leading to strong profitable customer relationships and a hard to imitate competitive advantage. ^

What makes online grocers work? A case study analysis of factors contributing to online grocery store profitability

This research examined the factors contributing to the performance of online grocers prior to, and following, the 2000 dot.com collapse. The primary goals were to assess the relationship between a company’s business model(s) and its performance in the online grocery channel and to determine if there were other company and/or market related factors that could account for company performance. ^ To assess the primary goals, a case based theory building process was utilized. A three-way cross-case analysis comprising Peapod, GroceryWorks, and Tesco examined the common profit components, the structural category (e.g., pure-play, partnership, and hybrid) profit components, and the idiosyncratic profit components related to each specific company. ^ Based on the analysis, it was determined that online grocery store business models could be represented at three distinct, but hierarchically, related levels. The first level was termed the core model and represented the basic profit structure that all online grocers needed in order to conduct operations. The next model level was termed the structural model and represented the profit structure associated with the specific business model configuration (i.e., pure-play, partnership, hybrid). The last model level was termed the augmented model and represented the company’s business model when idiosyncratic profit components were included. In relation to the five company related factors, scalability, rate of expansion, and the automation level were potential candidates for helping to explain online grocer performance. In addition, all the market structure related factors were deemed possible candidates for helping to explain online grocer performance. ^ The study concluded by positing an alternative hypothesis concerning the performance of online grocers. Prior to this study, the prevailing wisdom was that the business models were the primary cause of online grocer performance. However, based on the core model analysis, it was hypothesized that the customer relationship activities (i.e., advertising, promotions, and loyalty program tie-ins) were the real drivers of online grocer performance. ^