Moderation practices in a faculty of education : the four discourse model

Moderation of student assessment is a critical component of teaching and learning in contemporary universities. In Australia, moderation is mandated through university policies and through the new national university accreditation authority, Tertiary Education Quality and Standards Agency which began operations in late January 2012 (TEQSA, 2012). The TEQSA requirement to declare details of moderation and any other arrangements used to support consistency and reliability of assessment and grading across each subject in the course of study is a radical step intended to move toward heightened accountability and greater transparency in the tertiary sector as well as entrenching evidence-based practice in the management of Australian academic programs. In light of this reform, the purpose of this project was to investigate and analyse current moderation practices operating within a faculty of education at a large urban university in Queensland, Australia. This qualitative study involved interviews with the unit coordinators (n=21) and tutors (n=8) of core undergraduate education units and graduate diploma units within the faculty. Four distinct discourses of moderation that academics drew on to discuss their practices were identified in the study. These were: equity, justification, community building, and accountability. These discourses, together with recommendations for changes to moderation practices are discussed in this paper.

Multicam-course : terrifying but fun

This industry magazine article reports on the author's participation in a post-graduate level professional course in multi-camera drama directing conducted by the Australian Film Television & Radio School (AFTRS) in conjunction with 'Blue Heelers'/Network 7 in Melbourne.

The impact of the built environment on health across the life course : design of a cross-sectional data linkage study

Introduction: The built environment is increasingly recognised as being associated with health outcomes. Relationships between the built environment and health differ among age groups, especially between children and adults, but also between younger, mid-age and older adults. Yet few address differences across life stage groups within a single population study. Moreover, existing research mostly focuses on physical activity behaviours, with few studying objective clinical and mental health outcomes. The Life Course Built Environment and Health (LCBEH) project explores the impact of the built environment on self-reported and objectively measured health outcomes in a random sample of people across the life course. Methods and analysis: This cross-sectional data linkage study involves 15 954 children (0–15 years), young adults (16–24 years), adults (25–64 years) and older adults (65+years) from the Perth metropolitan region who completed the Health and Wellbeing Surveillance System survey administered by the Department of Health of Western Australia from 2003 to 2009. Survey data were linked to Western Australia's (WA) Hospital Morbidity Database System (hospital admission) and Mental Health Information System (mental health system outpatient) data. Participants’ residential address was geocoded and features of their ‘neighbourhood’ were measured using Geographic Information Systems software. Associations between the built environment and self-reported and clinical health outcomes will be explored across varying geographic scales and life stages. Ethics and dissemination: The University of Western Australia's Human Research Ethics Committee and the Department of Health of Western Australia approved the study protocol (#2010/1). Findings will be published in peer-reviewed journals and presented at local, national and international conferences, thus contributing to the evidence base informing the design of healthy neighbourhoods for all residents.

Development of an integrated GIS and land use planning course : impacts of hybrid instructional methods

This study reports an action research undertaken at Queensland University of Technology. It evaluates the effectiveness of the integration of GIS within the substantive domains of an existing land use planning course in 2011. Using student performance, learning experience survey, and questionnaire survey data, it also evaluates the impacts of incorporating hybrid instructional methods (e.g., in-class and online instructional videos) in 2012 and 2013. Results show that: students (re)iterated the importance of GIS in the course justifying the integration; the hybrid methods significantly increased student performance; and unlike replacement, the videos are more suitable as a complement to in-class activity.

Nutritional influences over the life course on lean body mass of individuals in developing countries

The double burden of childhood undernutrition and adult-onset adiposity in transitioning societies poses a significant public health challenge. The development of suboptimal lean body mass (LBM) could partly explain the link between these two forms of malnutrition. This review examines the evidence on both the role of nutrition in “developmental programming” of LBM and the nutritional influences that affect LBM throughout the life course. Studies from developing countries assessing the relationship of early nutrition with later LBM provide important insights. Overall, the evidence is consistent in suggesting a positive association of early nutritional status (indicated by birth weight and growth during first 2 years) with LBM in later life. Evidence on the impact of maternal nutritional supplementation during pregnancy on later LBM is inconsistent. In addition, the role of nutrients (protein, zinc, calcium, vitamin D) that can affect LBM throughout the life course is described. Promoting optimal intakes of these important nutrients throughout the life course is important for reducing childhood undernutrition as well as for improving the LBM of adults.

Dancing to too many tunes : contemporary course design in teacher education

Contemporary course designers in schools and faculties of Education are finding themselves dancing to many tunes, arguably too many tunes, in order to have their initial teacher education courses accredited by external agencies whilst satisfying internal approval processes and, critically, maintaining the philosophical integrity of their programs and their institutional watermarks. The “tunes” here are the agendas driven by and the demands made by distinct independent agencies. The external agencies influencing Education include: TEQSA (Tertiary Education Quality and Standards Agency) which will assure alignment to the AQF (Australian Qualifications Framework); professional bodies such as AITSL (Australian Institute for Teaching and School Leadership) which now accredits all pre-service teacher Education courses across Australia and assures alignment with the Australian Professional Standards for Teachers; and the state and territory regulatory authorities that have an impact within a specific jurisdiction, for example, the Queensland College of Teachers (QCT) and the Teacher Registration Board of Western Australia (TRBWA). This paper – whose findings have been arrived at through a year-long OLT National Teaching Fellowship - will outline the complex and competing agendas currently at play and focus on the disjuncture evident in the fundamental defining of who is a “graduate.” It will also attempt to identify where there are synergies between the complex demands being made. It will argue that there are too many “tunes” and the task of finding a balance between compliance and delivering effective initial teacher education may not be possible because of the cacophony of their conflicting demands.

Exploring sustainability themes in engineering accreditation and curricula

Purpose This paper aims to present key findings from an inquiry into engineering accreditation and curricula renewal. The research attempted to ascertain conceptions of requisite sustainability themes among engineering academics and professionals. The paper also reflects on the potential role of professional engineering institutions (PEIs) in embedding sustainability through their programme accreditation guidelines and wider implications in terms of rapid curricula renewal. Design/methodology/approach This research comprised an International Engineering Academic Workshop held during the 2010 International Symposium on Engineering Education in Ireland, on “accreditation and sustainable engineering”. This built on the findings of a literature review that was distributed prior to the workshop. Data collection included individual questionnaires administered during the workshop, and notes scribed by workshop participants. Findings The literature review highlighted a wide range of perspectives across and within engineering disciplines, regarding what sustainability/sustainable development (SD) themes should be incorporated into engineering curricula, and regarding language and terminology. This was also reflected in the workshop discussions. Notwithstanding this diversity, clusters of sustainability themes and priority considerations were distilled from the literature review and workshop. These related to resources, technology, values, ethics, inter- and intra-generational equity, transdisciplinarity, and systems and complex thinking. Themes related to environmental and economic knowledge and skills received less attention by workshop participants than represented in the literature. Originality/value This paper provides an appreciation of the diversity of opinion regarding priority sustainability themes for engineering curricula, among a group of self-selected engineering academics who have a common interest in education for SD. It also provides some insights and caveats on how these themes might be rapidly integrated into engineering curricula.

Ship Motion Control : Course Keeping and Roll Stabilisation Using Rudder and Fins

Motion control systems have a significant impact on the performance of ships and marine structures allowing them to perform tasks in severe sea states and during long periods of time. Ships are designed to operate with adequate reliability and economy, and in order to achieve this, it is essential to control the motion. For each type of ship and operation performed (transit, landing a helicopter, fishing, deploying and recovering loads, etc.), there are not only desired motion settings, but also limits on the acceptable (undesired) motion induced by the environment. The task of a ship motion control system is therefore to act on the ship so it follows the desired motion as closely as possible. This book provides an introduction to the field of ship motion control by studying the control system designs for course-keeping autopilots with rudder roll stabilisation and integrated rudder-fin roll stabilisation. These particular designs provide a good overview of the difficulties encountered by designers of ship motion control systems and, therefore, serve well as an example driven introduction to the field. The idea of combining the control design of autopilots with that of fin roll stabilisers, and the idea of using rudder induced roll motion as a sole source of roll stabilisation seems to have emerged in the late 1960s. Since that time, these control designs have been the subject of continuous and ongoing research. This ongoing interest is a consequence of the significant bearing that the control strategy has on the performance and the issues associated with control system design. The challenges of these designs lie in devising a control strategy to address the following issues: underactuation, disturbance rejection with a non minimum phase system, input and output constraints, model uncertainty, and large unmeasured stochastic disturbances. To date, the majority of the work reported in the literature has focused strongly on some of the design issues whereas the remaining issues have been addressed using ad hoc approaches. This has provided an additional motivation for revisiting these control designs and looking at the benefits of applying a contemporary design framework, which can potentially address the majority of the design issues.

Teaching fractions to adult learners enrolled in a civil construction course : knowledge, action and materials action in tandem

This paper investigates the teaching and learning of fractions to Indigenous adult learners in a Civil Construction Certificate Course. More specifically it explores why the use of materials is critical to building knowledge and understanding. This focus is important for two reasons. First, it allows for considerations of a trainer’s approach for teaching fractions and, second it provides insights into how adult learners can be supported with representing their practical experiences of fractions to make generalisation thus building on their knowledge and learning experiences. The paper draws on teaching episodes from an Australian Research Council funded Linkage project that investigates how mathematics is taught and learned in Certificate Courses, here, Certificate 11 in Civil Construction. Action research and decolonising methods (Smith, 1999) were used to conduct the research. Video excerpts which feature one trainer and three students are analysed and described. Findings from the data indicate that adult learners need to be supported with materials to assist with building their capacity to know and apply understandings of fractions in a range of contexts, besides construction. Without materials and where fractions are taught via pen and paper tasks, students are less likely to retain and apply fraction ideas to their Certificate Course. Further they are less likely to understand decimals because of limited understanding of fractions.

A 5- versus 3-day course of oral corticosteroids for children with asthma exacerbations who are not hospitalised : a randomised controlled trial

Objective To determine whether a 5-day course of oral prednisolone is superior to a 3-day course in reducing the 2-week morbidity of children with asthma exacerbations who are not hospitalised. Design, setting and participants Double-blind randomised controlled trial of asthma outcomes following a 5-day course of oral prednisolone (1 mg/kg) compared with a 3-day course of prednisolone plus placebo for 2 days. Participants were children aged 2–15 years who presented to the emergency departments of three Queensland hospitals between March 2004 and February 2007 with an acute exacerbation of asthma, but were not hospitalised. Sample size was defined a priori for a study power of 90%. Main outcome measures Difference in proportion of children who were symptom-free at Day 7, as measured by intention-to-treat (ITT) and per-protocol analysis; quality of life (QOL) on Days 7 and 14. Results 201 children were enrolled, and there was an 82% completion rate. There was no difference between groups in the proportion of children who were symptom-free (observed difference, 0.04 [95% CI, − 0.09 to 0.18] by ITT analysis; 0.04 [95% CI, − 0.17 to 0.09] by per-protocol analysis). There was also no difference between groups in QOL (P = 0.42). The difference between groups for the primary outcome was within the equivalence range calculated post priori. Conclusion A 5-day course of oral prednisolone confers no advantage over a 3-day course for children with asthma exacerbations who are not hospitalised.

Time course analysis of hypoxia, granulation tissue and blood vessel growth, and remodeling in healing rat cutaneous incisional primary intention wounds

Hypoxia and the development and remodeling of blood vessels and connective tissue in granulation tissue that forms in a wound gap following full-thickness skin incision in the rat were examined as a function of time. A 1.5 cm-long incisional wound was created in rat groin skin and the opposed edges sutured together. Wounds were harvested between 3 days and 16 weeks and hypoxia, percent vascular volume, cell proliferation and apoptosis, α-smooth muscle actin, vascular endothelial growth factor-A, vascular endothelial growth factor receptor-2, and transforming growth factor-β 1 expression in granulation tissue were then assessed. Hypoxia was evident between 3 and 7 days while maximal cell proliferation at 3 days (123.6 ± 22.2 cells/mm 2, p < 0.001 when compared with normal skin) preceded the peak percent vascular volume that occurred at 7 days (15.83 ± 1.10%, p < 0.001 when compared with normal skin). The peak in cell apoptosis occurred at 3 weeks (12.1 ± 1.3 cells/mm 2, p < 0.001 when compared with normal skin). Intense α-smooth muscle actin labeling in myofibroblasts was evident at 7 and 10 days. Vascular endothelial growth factor receptor-2 and vascular endothelial growth factor-A were detectable until 2 and 3 weeks, respectively, while transforming growth factor-β 1 protein was detectable in endothelial cells and myofibroblasts until 3-4 weeks and in the extracellular matrix for 16 weeks. Incisional wound granulation tissue largely developed within 3-7 days in the presence of hypoxia. Remodeling, marked by a decline in the percent vascular volume and increased cellular apoptosis, occurred largely in the absence of detectable hypoxia. The expression of vascular endothelial growth factor-A, vascular endothelial growth factor receptor-2, and transforming growth factor-β 1 is evident prior, during, and after the peak of vascular volume reflecting multiple roles for these factors during wound healing.

Personal injuries sustained in the course of employment - claim against employer under Workcover Queensland Act 1996

In Devlin v South Mole Island Resort [2003] QSC 020 the Court concluded the applicant was entitled to pursue a concurrent claim he alleged he had against the respondent under the Personal Injuries Proceedings Act 2002 in respect of injuries sustained in the course of employment, and also that the Workcover Queensland Act 1996 did not abolish the applicant's right to proceed against the respondent.

Course experiences, satisfaction and career intent of final year pre-registration Australian pharmacy students

Background In Australia, the profession of pharmacy has undergone many changes to adapt to the needs of the community. In recent years, concerns have been raised with evidence emerging of workforce saturation in traditional pharmacy practice sectors. It is not known how current final year pharmacy students’ perceive the different pharmacy career paths in this changing environment. Hence investigating students’ current experiences with their pharmacy course, interaction with the profession and developing an understanding of their career intentions would be an important step, as these students would make up a large proportion of future pharmacy workforce Objective The objective of this study was thus to investigate final year students’ career perspectives and the reasons for choosing pharmacy, satisfaction with this choice of pharmacy as a tertiary course and a possible future career, factors affecting satisfaction and intention of future career paths. Methods A quantitative cross sectional survey of final year students from 3 Australian universities followed by a qualitative semi-structured interview of a convenience sample of final year students from the University of Sydney. Results ‘Interest in health and medicine’ was the most important reason for choosing pharmacy (n=238). The majority of students were ‘somewhat satisfied’ with the choice of pharmacy (35.7%) as a course and possible future career. Positive associations were found between satisfaction and reasons for joining pharmacy such as ‘felt pharmacy is a good profession’ (p=0.003) while negative associations included ‘joined pharmacy as a gateway to medicine or dentistry’ (p=0.001). Quantitate and qualitative results showed the most frequent perception of community pharmacy was ‘changing’ while hospital and pharmaceutical industry was described as ‘competitive’ and ‘research’ respectively. The highest career intention was community followed by hospital pharmacy. Conclusion Complex factors including university experiences are involved in shaping students’ satisfaction and perception of career. This may relate to challenges in the community pharmacy sector, job opportunities in hospital and limited understanding of the pharmaceutical industry. The results offer insight for the profession in terms of entry into various roles and also to pharmacy educators for their roles in shaping curricula and placement experiences that attract future graduates to defined career pathways in pharmacy.

Course evaluation : reconfigurations for learning with learning management systems

The introduction of online delivery platforms such as learning management systems (LMS) in tertiary education has changed the methods and modes of curriculum delivery and communication. While course evaluation methods have also changed from paper-based in-class-administered methods to largely online-administered methods, the data collection instruments have remained unchanged. This paper reports on a small exploratory study of two tertiary-level courses. The study investigated why design of the instruments and methods to administer surveys in the courses are ineffective measures against the intrinsic characteristics of online learning. It reviewed the students' response rates of the conventional evaluations for the courses over an eight-year period. It then compared a newly developed online evaluation and the conventional methods over a two-year period. The results showed the response rates with the new evaluation method increased by more than 80% from the average of the conventional evaluations (below 30%), and the students' written feedback was more detailed and comprehensive than in the conventional evaluations. The study demonstrated the possibility that the LMS-based learning evaluation can be effective and efficient in terms of the quality of students' participation and engagement in their learning, and for an integrated pedagogical approach in an online learning environment.