Managing Industrial Simulator Visual Databases Using Geographic Information Systems

Geographic Information Systems are developed to handle enormous volumes of data and are equipped with numerous functionalities intended to capture, store, edit, organise, process and analyse or represent the geographically referenced information. On the other hand, industrial simulators for driver training are real-time applications that require a virtual environment, either geospecific, geogeneric or a combination of the two, over which the simulation programs will be run. In the final instance, this environment constitutes a geographic location with its specific characteristics of geometry, appearance, functionality, topography, etc. The set of elements that enables the virtual simulation environment to be created and in which the simulator user can move, is usually called the Visual Database (VDB). The main idea behind the work being developed approaches a topic that is of major interest in the field of industrial training simulators, which is the problem of analysing, structuring and describing the virtual environments to be used in large driving simulators. This paper sets out a methodology that uses the capabilities and benefits of Geographic Information Systems for organising, optimising and managing the visual Database of the simulator and for generally enhancing the quality and performance of the simulator.

Applicability of the GP Device to the Circle of Willis Arteries by Using a Mathematical Model

According to the World Health Organization, 15 million people suffer stroke worldwide each year, of these, 5 million die and 5 million are permanently disabled. Stroke is therefore a major cause of mortality world-wide. The majority of strokes are caused by a blood clot that occludes an artery in the brain, and although thrombolytic agents such as Alteplase are used to dissolve clots that arise in the arteries of the brain, there are limitations on the use of these thrombolytic agents. However over the past decade, other methods of treatment have been developed which include Thrombectomy Devices e.g. the 'GP' Thrombus Aspiration Device ('GP' TAD). Such devices may be used as an alternative to thrombolytics or in conjunction with them to extract blood clots in arteries such as the middle cerebral artery of the midbrain brain, and the posterior inferior cerebellar artery (PICA) of the posterior aspect of the brain. In this paper, we mathematically model the removal of blood clots using the 'GP' TAD from selected arteries of the brain where blood clots may arise taking into account factors such as the resistances, compliances and inertances effects. Such mathematical modelling may have potential uses in predicting the pressures necessary to extract blood clots of given lengths, and masses from arteries in the Circle of Willis - posterior circulation of the brain

Analysis and 2D Simulation of a Hexapod Robot Leg for Remote Exploration

A walking machine is a wheeled rover alternative, well suited for work in an unstructured environment and specially in abrupt terrain. They have some drawback like speed and power consumption, but they can achieve complex movements and protrude very little the environment they are working on. The locomotion system is determined by the terrain conditions and, in our case, this legged design has been chosen based in a working area like Rio Tinto in the South of Spain, which is a river area with abrupt terrain. A walking robot with so many degrees of freedom can be a challenge when dealing with the analysis and simulations of the legs. This paper shows how to deal with the kinematical analysis of the equations of a hexapod robot based on a design developed by the Center of Astrobiology INTA-CSIC following the classical formulation of equations

The P-Adaptive BIEM Version in Elastostatics

This paper introduces the p-adaptive version of the boundary element method as a natural extension of the homonymous finite element approach. After a brief introduction to adaptive techniques through their finite element formulation in elastostatics, the concepts are cast into the boundary element environment. Thus, the p-adaptive version of boundary integral methods is shown to be a generalization of already well known ideas. In order to show the power of these numerical procedures, the results of two practical analysis using both methods are presented.

Evaluación del ruido ambiental en espacios naturales protegidos: implicaciones para su gestión

Esta Tesis Doctoral trata sobre la caracterización acústica de los ecosistemas naturales y la evaluación del impacto ambiental del ruido antropogénico sobre sus potenciales receptores en estos lugares, incluidos los receptores no humanos y sus efectos ecológicos, además, analiza las implicaciones para su gestión a distintas escalas y se lleva a cabo una valoración económica. Este trabajo ofrece soluciones para caracterizar los paisajes sonoros de forma compatible con distintas escalas de trabajo, nivel de esfuerzo técnico y en contextos de recursos limitados que haga viable su tratamiento como cualquier otra variable ambiental en el ámbito de la conservación y gestión del medio natural. Se han adaptado herramientas y metodologías propias de disciplinas como la acústica ambiental, bioacústica y ecología del paisaje, para servir a los objetivos específicos de la evaluación y gestión de los paisajes sonoros y el ruido ambiental en amplias extensiones geográficas. Se ha establecido un método general de muestreo sistemático para trabajo de campo y también se han adaptado métodos de modelización informática, que permiten analizar escenarios sonoros dinámicos en el tiempo y en el espacio, desde localizaciones puntuales hasta la escala del paisaje. Es posible elaborar cartografía ambiental con esta información y se ha representado gráficamente la zona de influencia de distintas fuentes de ruido sobre la calidad de distintos hábitats faunísticos. Se recomienda el uso del indicador del nivel de presión sonora equivalente (Leq) por su operatividad en medición y modelización, y su adaptabilidad a cualquier dimensión espacial y temporal que se requiera, por ejemplo en función del paisaje, actividades o especies que se establezcan como objeto de análisis. Se ha comprobado que las voces y conversaciones de parte de los excursionistas en zonas de reposo, observación y descanso (Laguna Grande de Peñalara) es la fuente de ruido que con mayor frecuencia identifican los propios visitantes (51%) y causa un incremento del nivel de presión sonora equivalente de unos 4,5 dBA sobre el nivel correspondiente al ambiente natural (Lnat). También se ha comprobado que carreteras con bajo nivel de tráfico (IMD<1000) pueden causar estrés fisiológico sobre la fauna y afectar a la calidad de sus hábitats. La isófona de 30 dBA del índice Leq (24h) permite dividir a los corzos de la zona de estudio en dos grupos con diferente nivel de estrés fisiológico, más elevado en los que se sitúan más cerca de la carretera con mayor volumen de tráfico y se expone a mayores niveles de ruido. Por otro lado, ha sido posible delimitar una zona de exclusión para la nidificación de buitre negro alrededor de las carreteras, coincidente con la isófona Leq (24h) de 40 dBA que afecta al 11% de su hábitat potencial. Además se ha llevado a cabo una novedosa valoración económica de la contaminación acústica en espacios naturales protegidos, mediante el análisis de la experiencia sonora de los visitantes del antiguo Parque Natural de Peñalara, y se ha constatado su disposición al pago de una entrada de acceso a estos lugares (aproximadamente 1 euro) si redundara en una mejora de su estado de conservación. En conclusión, los espacios naturales protegidos pueden sufrir un impacto ambiental significativo causado por fuentes de ruido localizadas en su interior pero también lejanas a ellos, que se sitúan fuera del ámbito de competencias de sus gestores. Sucesos sonoros como el sobrevuelo de aviones pueden incrementar en aproximadamente 8 dBA el nivel de referencia Lnat en las zonas tranquilas del parque. Se recomienda llevar a cabo una gestión activa del medio ambiente sonoro y se considera necesario extender la investigación sobre los efectos ecológicos del ruido ambiental a otros lugares y especies animales. ABSTRACT This PhD Thesis deals with acoustic characterization of natural ecosystems and anthropogenic noise impact assessment on potential receivers, including non-human receivers and their ecological effects. Besides, its management implications at different scales are analyzed and an economic valuation is performed. This study provides solutions for characterizing soundscapes in a compatible way with different working scales, level of technical effort and in a context of limited resources, so its treatment becomes feasible as for any other environmental variable in conservation and environmental management. Several tools and methodologies have been adapted from a variety of disciplines such as environmental acoustics, bioacoustics and landscape ecology, to better serve the specific goals of assessing and managing soundscapes and environmental noise in large areas. A procedure has been established for systematic field measurement surveys and noise common computer modelling methods have also been adapted in order to analyze dynamic soundscapes across time and space, from local to landscape scales. It is possible to create specific thematic cartography as for instance delimiting potential influence zone from different noise sources on animal habitats quality. Use of equivalent continuous sound pressure level index (Leq) is recommended because it provides great flexibility in operation for noise measurement and modelling, and because of its adaptability to any required temporal and spatial dimension, for instance landscape, activities or the target species established as study subjects. It has been found that human voices and conversations in a resting and contemplation area (Laguna Grande de Peñalara) is the most frequently referred noise source by national park visitors (51 %) when asked. Human voices alter this recreational area by increasing the sound pressure level approximately 4.5 dBA over the natural ambient level (Lnat). It has also been found that low traffic roads (AADT<1000 ) may cause physiological stress on wildlife and affect the quality of their habitats. It has also been possible to define a road-effect zone by noise mapping, which suggests an effective habitat loss within the Leq (24h) 30 dBA isophone in case of Roe deer and also divide the study area in two groups with different physiological stress level, higher for those exposed to higher noise levels and traffic volume. On the other hand, it has been possible to determine an exclusion area for Cinereous vulture nesting surrounding roads which is coincident with the Leq (24h) 40 dBA isophone and affects 11 % of the vulture potential habitat. It has also been performed an economic estimation of noise pollution impact on visitors’ perception and results showed that visitors would be willing to pay an entrance fee of approximately 1 euro if such payment is really bringing an improvement of the conservation status. In conclusion, protected areas may be significantly affected by anthropogenic noise sources located within the park borders but perturbations may also be caused by large-distance noise sources outside the park managers’ jurisdiction. Aircraft overflight events disrupted quietness and caused Leq increases of almost 8 dBA during a monitoring period with respect to Lnat reference levels in the park quiet areas. It is recommended to actively manage the acoustic environment. Finally, further research on ecological impacts of environmental noise needs to be extended to other species and places.

La aportación de la Península Ibérica a la tecnología naval analizada a través de la interpretación de los documentos y la reproducción de los buques descritos en ellos (1570-1620)

El período de la Historia comprendido entre 1570 y 1620 nos ha dejado un importante conjunto de documentos relacionados con la construcción naval en la Península Ibérica. En una época convulsa en la que los reinos de España y Portugal se aglutinaron bajo una misma Corona, surgen una serie de manuscritos, libros y leyes que reflejan la creciente preocupación de la sociedad por el tema naval. Entre sus páginas encontramos las descripciones del proceso constructivo de los buques que sus autores consideraban más significativos para las demandas que se planteaban en ese momento. Este proceso que combinaba generación de formas y construcción del buque provenía de una secular tradición nacida en el Mediterráneo. Mediante reglas geométricas sencillas, el constructor naval trazaba las secciones centrales y el perfil de la nao, quedando los extremos de la misma (hasta más de la mitad de la eslora) a su buen hacer y experiencia. Las herramientas informáticas de generación de superficies mediante NURBs (Non- Uniform Rational B-spline) permiten reconstruir las formas de los navíos reproduciendo con fiabilidad las carenas de los mismos a partir de los documentos de la época. Mediante un estudio detallado de interpretación de los textos y transcribiendo los procesos, llegamos a obtener con un buen grado de precisión las carenas de los buques descritos en sus páginas. A partir de ahí y mediante el análisis cualitativo y cuantitativo de los parámetros obtenidos es posible valorar si las soluciones representadas por los barcos respondían a las preguntas planteadas por sus autores , la influencia de factores externos a la construcción naval tales como las regulaciones del Estado o identificar su relación con el germen y la expansión de la teoría que ha determinado los efectos de la Ciencia en la Arquitectura Naval. Comenzando por la nao veneciana de 1550, heredera de la secular tradición constructiva mediterránea, hasta llegar a las Reales Ordenanzas promulgadas en 1618, se reproducen hasta nueve carenas a partir de otros tantos documentos, se dibujan sus planos de formas y se exportan para su análisis hidrostático. El trabajo requiere la realización de otros estudios en paralelo necesarios para entender aquellos factores que formaron parte del desarrollo tecnológico naval como son, las unidades de medida en uso en los astilleros, los distintos sistemas de arqueo impuestos por la Corona y la representación de los diferentes instrumentos geométricos de modificación de los parámetros de diseño. A lo largo del trabajo se dan respuesta a interrogantes planteados por la arqueología en relación con el desarrollo de la arquitectura naval poniendo en evidencia que durante este período quedaron establecidos los fundamentos teórico-prácticos de lo que más adelante se convirtió en la ciencia de la ingeniería naval y se plantean nuevos retos para aquellos que deseen continuar la apasionante tarea de la investigación científica de nuestra historia. ABSTRACT The period of the History comprised between 1570 and 1620 has left an important set of shipbuilding documents in the Iberian Peninsula. In a turbulent time in which the kingdoms of Spain and Portugal were ruled under the same Crown, manuscripts, books and laws that reflect the growing concern of society for the naval theme arose. We found among their pages shipbuilding process descriptions of the more relevant vessels that responded to claims that arose at that time. This process brought together hull generation and shipbuilding and came from a secular tradition born in the Mediterranean. By means of simple geometric rules, the shipbuilder traced the central sections and profile of the ship, leaving the ends thereof (almost half of the length) to its good performance and experience. 3D computer modelling software by NURBs (Non-Uniform Rational B-spline) surfaces helps to reconstruct ships hulls from contemporary documents. Through a detailed texts interpretation and transcription processes, we manage to reach with a good degree of accuracy the ship hulls described in its pages. From there and through qualitative and quantitative analysis of the parameters obtained we can assess whether the solutions represented by ships gave response to the questions raised by the authors, the influence of external factors such as shipbuilding state regulations or identify their relationship to the origin and expansion of the theory that has determined the effects of Science in Naval Architecture. From the 1550 Venetian nao, inheritor of the secular Mediterranean building tradition, to the Royal Ordinances enacted in 1618, as nine hulls are reproduced, their line drawings are traced and exported for analysis hydrostatic. Further studies are needed to understand the factors that were part of shipbuilding technology development as the units of measure in use in shipyards, the different official regulations for calculating ship tonnage and the different geometric instruments to amend the design parameters. The work gives response to questions raised by archaeology in relation to the development of naval architecture highlighting that during this period were established the theoretical and practical foundations of what later became the science of naval engineering and raising new challenges for those wishing to continue the exciting task of scientific research of our History.

Aspectos formales y constructivos en la obra de Guillem Sagrera: el uso de las plantillas

Los enjarjes, jarjas o jarjamentos conforman el comienzo de la bóveda de crucería, el lugar en el que todos los nervios nacen reunidos. Permiten la transición entre el muro y las dovelas que constituyen nervios, resolviendo un encuentro de gran importancia constructiva. Están compuestos por piezas de lechos horizontales que traban con el muro y que, además de conformar el arranque de los nervios, han de proporcionar apoyo a las primeras dovelas. Al construirse a la vez que el muro y antes que el resto de la bóveda, se podría decir que son los encargados de portar su ADN: en ellos queda registrado el número de nervios que tendrá la bóveda, su curvatura, desde qué altura arrancará cada uno, su perfil, etc. El objetivo de este trabajo se centra en estudio de los enjarjes en la obra de Guillem Sagrera abordando su dimensión tecnológica, constructiva y de diseño. Dos características los distinguen de otras soluciones y justifican su interés: los nervios surgen directamente del muro, sin la intermediación de capiteles, ménsulas o pilastras; y se diseñan con la intención de facilitar la aparición de intersecciones entre las molduras de sus perfiles, en algunos casos mediante el cruce de los ejes de los nervios. Sagrera nos acerca a una innovación arquitectónica en la que el esfuerzo no se centra en realizar bóvedas con muchos nervios o con trazados en planta complejos, sino en la cuidada resolución de este encuentro de nervios. En ella se adivina el trabajo minucioso con las plantillas que controlan el trazado del contorno de los lechos de las piezas y la hábil mano de los canteros que son capaces de tallar intersecciones de gran complejidad. Se ha realizado un repaso de los primeros experimentos relativos al modo de relacionarse los nervios entre sí para ilustrar el contexto y origen de las soluciones realizadas por Guillem Sagrera. Mostramos que ante ciertas dificultades, consecuencia de la reunión de nervios, los constructores fueron capaces de desarrollar nuevas soluciones, mediante la experimentación con un sistema constructivo que conocían y manejaban con destreza. Para acercarnos a la comprensión de las estrategias de diseño que permiten el proyecto de estos enjarjes y los procedimientos técnicos y constructivos necesarios para su ejecución, nos vimos en la necesidad de adentrarnos en la problemática general de los enjarjes de la bóveda de crucería. De este modo, lo que empezó siendo una introducción para poder contextualizar la obra del mallorquín acabó convirtiéndose en la primera parte de la tesis, cuyo volumen prácticamente equipara a la segunda. En ella presentamos el proceso de diseño, trazado y talla de los cuatro enjarjes llevados a cabo en el taller de cantería de la ETSAM, en los que hemos podido experimentar de manera práctica los aspectos teóricos desarrollados. Estos ensayos nos han permitido contrastar hipótesis y baremar la dificultad de ciertos procedimientos o procesos, así como acercarnos realmente al elemento constructivo. El trabajo práctico nos ha enseñado a no fiarnos siempre de las hipótesis que se desarrollan modelando con el ordenador o dibujando; a valorar el pensar con las manos. En relación con la obra de Sagrera, la presente investigación realiza aportaciones al conocimiento del cambio proyectual y constructivo llevado a cabo en los arranques de las bóvedas entre los siglos XIII y XV, cuando los nervios comienzan a surgir directamente de los soportes y se dan los primeros cruzamientos. Mostramos que ya no solamente se construyen enjarjes fruto directo de la geometría general de la bóveda, sino que se llevan a cabo cambios deliberados en relación a su resultado, en los que se advierten decisiones proyectuales que, por supuesto, no serían viables sin las posibilidades que ofrece el trabajo con plantillas. ABSTRACT The solid blocks commonly known as tas-de-charge (in Spanish enjarjes, jarjas or jarjamentos) constitute the beginning of the ribbed vault – the place from which all the ribs spring together. They facilitate a transition between the wall and the rib voussoirs, and thus solve a junction of utmost constructive importance. They consist of blocks set in horizontal courses which interlock with the wall and which, as well as constituting the springing of the ribs, serve as a support for their first voussoirs. The tas-de-charge are built simultaneously with the wall and well before the remainder of the vault – thus, they arguably carry its ‘DNA’, since they register how many ribs the vault will have as well as their curvature, their springing height or their profile. This work is focused on the study of the tas-de-charge in the works of Guillem Sagrera, and will address their technological, constructive and design aspects. Two characteristics set these apart from other solutions and justify their relevance: these are that the ribs spring directly from the wall without the mediation of capitals, corbels or pilasters; and that they are deliberately designed to force the intersection of their mouldings, in some cases by crossing the rib axes. Sagrera’s work tells a story of architectural innovation – one where the effort is not centred on creating vaults with numerous ribs or a sophisticated ground plan, but on carefully solving the rib unions, which evidence a meticulous use of templates to control the tracing of the pieces’ profiles as well as the skill of the stonemasons, able to carve highly complex intersections. An overview of the first experiments with rib relationships will illustrate the context and origin of Guillem Sagrera’s solutions. We show how, faced with difficulties arising from the convergence of ribs into the tas-de-charge, builders were able to develop new solutions by experimenting with a construction system that they were already familiar with and could control easily. In order to gain a better insight into the design strategies behind his tas-de-charge and the technical and constructive procedures required for their execution, we found ourselves facing the need to address the general subject of tas-de-charge in ribbed vaults. This, which began as an introduction meant as context for Sagrera’s work, took on a life of its own and became the first half of the thesis, with a volume practically equal to that of the second. We have devoted a chapter to experimental archaeology. It comprises the design, tracing and carving processes for the four tas-de-charge executed at the ETSAM Stonecutting Workshop, in which we have tested experimentally the theories studied in the previous chapters. These tests have allowed us to contrast hypotheses, assess the difficulty of certain procedures or processes and understand the built element as a real entity. The practical work has taught us not to always trust the hypotheses proposed through computer modelling or drawing – and to recognise the importance of coordinating the hands and the mind. After studying Sagrera’s work and contrasting it with other related or previous tas-de-charge, our research will seek to make a contribution to the study of the shift in the design and construction of vault springers that took place between the 13th and 14th centuries, when ribs began to spring directly from their support and moulding crossings began to appear. We show that, from then on, tas-de-charge would not only depend on the general vault geometry – deliberate modifications would be carried out in order to achieve the desired result. This reveals design decisions that would have been unworkable if not for the effective use of template strategies.

Difference schemes for numerical solutions of lagging models of heat conduction

Non-Fourier models of heat conduction are increasingly being considered in the modeling of microscale heat transfer in engineering and biomedical heat transfer problems. The dual-phase-lagging model, incorporating time lags in the heat flux and the temperature gradient, and some of its particular cases and approximations, result in heat conduction modeling equations in the form of delayed or hyperbolic partial differential equations. In this work, the application of difference schemes for the numerical solution of lagging models of heat conduction is considered. Numerical schemes for some DPL approximations are developed, characterizing their properties of convergence and stability. Examples of numerical computations are included.

An approach to the application of shift-and-add algorithms on engineering and industrial processes

Different kinds of algorithms can be chosen so as to compute elementary functions. Among all of them, it is worthwhile mentioning the shift-and-add algorithms due to the fact that they have been specifically designed to be very simple and to save computer resources. In fact, almost the only operations usually involved with these methods are additions and shifts, which can be easily and efficiently performed by a digital processor. Shift-and-add algorithms allow fairly good precision with low cost iterations. The most famous algorithm belonging to this type is CORDIC. CORDIC has the capability of approximating a wide variety of functions with only the help of a slight change in their iterations. In this paper, we will analyze the requirements of some engineering and industrial problems in terms of type of operands and functions to approximate. Then, we will propose the application of shift-and-add algorithms based on CORDIC to these problems. We will make a comparison between the different methods applied in terms of the precision of the results and the number of iterations required.

Thermal model for charring rate calculation in wooden cellular slabs under fire

Wood is a natural and traditional building material, as popular today as ever, and presents advantages. Physically, wood is strong and stiff, but compared with other materials like steel is light and flexible. Wood material can absorb sound very effectively and it is a relatively good heat insulator. But dry wood burns quite easily and produces a great deal of heat energy. The main disadvantage is the high level of combustion when exposed to fire, where the point at which it catches fire is from 200–400°C. After fire exposure, is need to determine if the charred wooden structures are safe for future use. Design methods require the use of computer modelling to predict the fire exposure and the capacity of structures to resist those action. Also, large or small scale experimental tests are necessary to calibrate and verify the numerical models. The thermal model is essential for wood structures exposed to fire, because predicts the charring rate as a function of fire exposure. The charring rate calculation of most structural wood elements allows simple calculations, but is more complicated for situations where the fire exposure is non-standard and in wood elements protected with other materials. In this work, the authors present different case studies using numerical models, that will help professionals analysing woods elements and the type of information needed to decide whether the charred structures are adequate or not to use. Different thermal models representing wooden cellular slabs, used in building construction for ceiling or flooring compartments, will be analysed and submitted to different fire scenarios (with the standard fire curve exposure). The same numerical models, considering insulation material inside the wooden cellular slabs, will be tested to compare and determine the fire time resistance and the charring rate calculation.

Simulating spray deposition on plant canopies within a wind tunnel

Three-dimensional computer modelling techniques are being used to develop a probabilistic model of turbulence-related spray transport around various plant architectures to investigate the influence of plant architectures and crop geometry on the sprayapplication process. Plant architecture models that utilise a set of growth rules expressed in the Lindenmayer systems (L-systems) formalism have been developed and programmed using L-studio software. Modules have been added to simulate the movement ofdroplets through the air and deposition on the plant canopy. Deposition of spray on an artificial plant structure was measured in the wind tunnel at the University of Queensland, Gatton campus and the results compared to the model simulation. Further trials are planned to measure the deposition of spray droplets on various crop and weed species and the results from these trials will be used to refine and validate the combined spray and plant architecture model.

The tribology of linear tape recording systems

This thesis is devoted to the tribology at the head~to~tape interface of linear tape recording systems, OnStream ADRTM system being used as an experimental platform, Combining experimental characterisation with computer modelling, a comprehensive picture of the mechanisms involved in a tape recording system is drawn. The work is designed to isolate the mechanisms responsible for the physical spacing between head and tape with the aim of minimising spacing losses and errors and optimising signal output. Standard heads-used in ADR current products-and prototype heads- DLC and SPL coated and dummy heads built from a AI203-TiC and alternative single-phase ceramics intended to constitute the head tape-bearing surface-are tested in controlled environment for up to 500 hours (exceptionally 1000 hours), Evidences of wear on the standard head are mainly observable as a preferential wear of the TiC phase of the AI203-TiC ceramic, The TiC grains are believed to delaminate due to a fatigue wear mechanism, a hypothesis further confirmed via modelling, locating the maximum von Mises equivalent stress at a depth equivalent to the TiC recession (20 to 30 nm). Debris of TiC delaminated residues is moreover found trapped within the pole-tip recession, assumed therefore to provide three~body abrasive particles, thus increasing the pole-tip recession. Iron rich stain is found over the cycled standard head surface (preferentially over the pole-tip and to a lesser extent over the TiC grains) at any environment condition except high temperature/humidity, where mainly organic stain was apparent, Temperature (locally or globally) affects staining rate and aspect; stain transfer is generally promoted at high temperature. Humidity affects transfer rate and quantity; low humidity produces, thinner stains at higher rate. Stain generally targets preferentially head materials with high electrical conductivity, i.e. Permalloy and TiC. Stains are found to decrease the friction at the head-to-tape interface, delay the TiC recession hollow-out and act as a protective soft coating reducing the pole-tip recession. This is obviously at the expense of an additional spacing at the head-to-tape interface of the order of 20 nm. Two kinds of wear resistant coating are tested: diamond like carbon (DLC) and superprotective layer (SPL), 10 nm and 20 to 40 nm thick, respectively. DLC coating disappears within 100 hours due possibly to abrasive and fatigue wear. SPL coatings are generally more resistant, particularly at high temperature and low humidity, possibly in relation with stain transfer. 20 nm coatings are found to rely on the substrate wear behaviour whereas 40 nm coatings are found to rely on the adhesive strength at the coating/substrate interface. These observations seem to locate the wear-driving forces 40 nm below the surface, hence indicate that for coatings in the 10 nm thickness range-· i,e. compatible with high-density recording-the substrate resistance must be taken into account. Single-phase ceramic as candidate for wear-resistant tape-bearing surface are tested in form of full-contour dummy-heads. The absence of a second phase eliminates the preferential wear observed at the AI203-TiC surface; very low wear rates and no evidence of brittle fracture are observed.

Ionic and molecular diffusion in cementitious materials

The work described in this thesis is an attempt to provide improved understanding of the effects of several factors affecting diffusion in hydrated cement pastes and to aid the prediction of ionic diffusion processes in cement-based materials. Effect of pore structure on diffusion was examined by means of comparative diffusion studies of quaternary ammonium ions with different ionic radii. Diffusivities of these ions in hydrated pastes of ordinary portland cement with or without addition of fly ash were determined by a quasi-steady state technique. The restriction of the pore geometry on diffusion was evaluated from the change of diffusivity in response to the change of ionic radius. The pastes were prepared at three water-cement ratios, 0.35, 0.50 and 0.65. Attempts were made to study the effect of surface charge or the electrochemical double layer at the pore/solution interface on ionic diffusion. An approach was to evaluate the zeta potentials of hydrated cement pastes through streaming potential measurements. Another approach was the comparative studies of the diffusion kinetics of chloride and dissolved oxygen in hydrated pastes of ordinary portland cement with addition of 0 and 20% fly ash. An electrochemical technique for the determination of oxygen diffusivity was also developed. Non-steady state diffusion of sodium potassium, chloride and hydroxyl ions in hydrated ordinary portland cement paste of water-cement ratio 0.5 was studied with the aid of computer-modelling. The kinetics of both diffusion and ionic binding were considered for the characterization of the concentration profiles by Fick's first and second laws. The effect of the electrostatic interactions between ions on the overall diffusion rates was also considered. A general model concerning the prediction of ionic diffusion processes in cement-based materials has been proposed.