A climatologia aplicada ao ambiente construído : uma contribuição à caracterização climática de Porto Alegre/RS

Com caráter informativo, inicia-se apresentando a relação entre a climatologia e o ambiente construído, em seus campos especificos de aplicação (urbanismo, projeto de edificações, execução de obras, e manutenção e uso das construções), considerando-se os aspectos históricos, econômico-ecológicos e os ligados à súde e ao conforto do usuário, abrangidos por tal relação. A importância da disponibilidade de informações climatológicas é então comentada, bem como diversas metodalagias de análise e representação de dados climáticos. Com caráter aplicativo, apresenta-se uma contribuigão à caracterização climática da cidade de Porto Alegre, RS. São analisadas os valores médios horários-mensais doa principais parâmetros climáticos disponíveis (temperatura, umidade, velocidade e direção do vento, e nebulosidade), propondo-se uma representação gráfica sintética alternativa para os mesmos. A análise é complementada pala execução de dois procedimentos técnicos: avaliação do conforto térmico, com identificação do período critico de verão, e projeto de dispositivo de sombreamento de aberturas retangulares. Embora esteja em foco o caso específico de Porto Alegre, tais metodologias encontram-se descritas de modo a serem aplicadas a qualquer outra localidade, procurando-se ampliar a utilidade prática do presente estudo.

A gestão da qualidade nos cursos de graduação a distância da UFRN/SEDIS : a percepção dos discentes

The management of water resources in the river basin level, as it defines the Law nº 9433/97, requires the effective knowledge of the processes of hydrological basin, resulting from studies based on consistent series of hydrological data that reflect the characteristics of the basin. In this context, the objective of this work was to develop the modeling of catchment basin of the river Jundiaí - RN and carry out the study of attenuation of a flood of the dam Tabatinga, by means of a monitoring project of hydrological data and climatology of the basin, with a view to promoting the development of research activities by applying methodologies unified and appropriate for the assessment of hydrological studies in the transition region of the semiarid and the forest zone on the coast of Rio Grande do Norte. For the study of the hydrological characteristics of the basin was conducted the automatic design of the basin of the river Jundiaí, with the aid of programs of geoprocessing, was adopted a hydrological model daily, the NRCS, which is a model determined and concentrated. For the use of this model was necessary to determine some parameters that are used in this model, as the Curve Number. Having in mind that this is the first study that is being conducted in the basin with the employment of this model, it was made sensitivity analysis of the results of this model from the adoption of different values of CN, situated within a range appropriate to the conditions of use, occupation and the nature of the soil of this basin. As the objective of this study was also developing a simulation model of the operation of the Tabatinga dam and with this flood control caused in the city of Macaíba, it was developed a mathematical model of fluid balance, developed to be used in Microsoft Excel. The simulation was conducted in two phases: the first step was promoted the water balance daily that allowed the analysis of the sensitivity of the model in relation to the volume of waiting, as well as the determination of the period of greatest discharges daily averages. From this point, it was assumed for the second stage, which was in the determination of the hydrograph of discharges effluent slots, that was determined by means of the fluid balance time, on the basis of the discharges effluents generated by a mathematical equation whose parameters were adjusted according to the hydrograph daily. Through the analyzes it was realized that the dam Tabatinga only has how to carry out the attenuation of floods through the regularization of the volume of waiting, with this there is a loss of approximately 56.5% on storage capacity of this dam, because for causing the attenuation effect of filled the shell of this dam has to remain more than 5m below the level of the sill, representing at least 50.582.927m3. The results obtained with the modeling represents a first step in the direction of improving the level of hydrological information about the behavior of the basins of the semiarid. In order to monitor quantitatively the hydrographic basin of the river Jundiaí will be necessary to install a rain gauge register, next to the Tabatinga dam and a pressure transducer, for regular measurements of flow in the reservoir of the dam. The climatological data will be collected in full automatic weather station installed in Agricultural School Jundiaí

Épocas de plantio de milho em função das deficiências hídricas no solo em Cambará-PR

The aim of this study was to try the forecast of corn (Zea mays L.) sowing dates, the understanding of the quantitative effect of water deficits on that crop and crop yield decrease on a basis of a climatic model of water deficit forecast. This model was applied at Cambara (lat. 23 degrees 00'S, long. 50 circle 02'WGr, altitude 450 m), PR, Brazil. The model estimates yield decrease, in relation to potential values, as a function of the sowing dates which determine flowering and grain filling dates, highly critical times in relation to water deficit. The estimates were done from expected values of water deficit, at the 80% probability level and accumulated degrees-days, using several climatological data. Results show that the first ten days of November are the best corn sowing date under dry or irrigated conditions. Under these same conditions, the worst time showed to be August. Estimates of total needs of supplementar irrigation get values of 126 e 226 mm, respectively to the corn sowed at the first ten days of November and August.

Avaliação da eficiência de sistema fito-pedológico (Wetlands) na depuração de efluentes domésticos gerados em pequena comunidade

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação da utilização de sistemas de alagados construídos como sistema de tratamento terciário de efluentes e para geração de biomassa da cultura de taboa (Typha sp)

Pós-graduação em Ciência Florestal - FCA

Modelos agrometeorológicos estatísticos de previsão de produtividade e qualidade para cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Balanço de energia de fluxo de CO2: cerrado da floresta estadual de Assis

Based on climatological data and energy flow, this paper analyzes the behavior observed in microclimatic an important remnant of cerrado in the São Paulo State. The seasonal climate is well marked, in the study area, with two climatic periods (one dry and one wet). The vegetation presents physiology as a function of water availability and the local thermal conditions and can be seen marked changes in the landscape due to the more or less presence of solar radiation. It’s important to understand the ecosystems behave in the context of global change. It has gained the attention of many researchers in the world.

A dynamic model of oceanic sulfur (DMOS) applied to the Sargasso Sea: Simulating the dimethylsulfide (DMS) summer paradox

[EN]A new one-dimensional model of DMSP/DMS dynamics (DMOS) is developed and applied to the Sargasso Sea in order to explain what drives the observed dimethylsulfide (DMS) summer paradox: a summer DMS concentration maximum concurrent with a minimum in the biomass of phytoplankton, the producers of the DMS precursor dimethylsulfoniopropionate (DMSP). Several mechanisms have been postulated to explain this mismatch: a succession in phytoplankton species composition towards higher relative abundances of DMSP producers in summer; inhibition of bacterial DMS consumption by ultraviolet radiation (UVR); and direct DMS production by phytoplankton due to UVR-induced oxidative stress. None of these hypothetical mechanisms, except for the first one, has been tested with a dynamic model. We have coupled a new sulfur cycle model that incorporates the latest knowledge on DMSP/DMS dynamics to a preexisting nitrogen/carbon-based ecological model that explicitly simulates the microbial-loop. This allows the role of bacteria in DMS production and consumption to be represented and quantified. The main improvements of DMOS with respect to previous DMSP/DMS models are the explicit inclusion of: solar-radiation inhibition of bacterial sulfur uptakes; DMS exudation by phytoplankton caused by solar-radiation-induced stress; and uptake of dissolved DMSP by phytoplankton. We have conducted a series of modeling experiments where some of the DMOS sulfur paths are turned “off” or “on,” and the results on chlorophyll-a, bacteria, DMS, and DMSP (particulate and dissolved) concentrations have been compared with climatological data of these same variables. The simulated rate of sulfur cycling processes are also compared with the scarce data available from previous works. All processes seem to play a role in driving DMS seasonality. Among them, however, solar-radiation-induced DMS exudation by phytoplankton stands out as the process without which the model is unable to produce realistic DMS simulations and reproduce the DMS summer paradox.

Potencial de la producción de bioelectricidad de las Comarcas Agrarias de la Comunidad de Madrid en base a centeno y triticale

En el presente trabajo se estudia la producción potencial de biomasa procedente de los cultivos de centeno y triticale en las seis comarcas agrarias de la Comunidad de Madrid (CM) y la posibilidad de su aplicación a la producción de bioelectricidad en cada una de ellas. En primer lugar se realiza un estudio bibliográfico de la situación actual de la bioelectricidad. Uno de los principales datos a tener en cuenta es que en el PER 2011- 2020 se estima que el total de potencia eléctrica instalada a partir de biomasa en España en el año 2020 sea de 1.350 MW, unas dos veces y media la existente a finales de 2010. Además, se comenta el estado de la incentivación del uso de biomasa de cultivos energéticos para producción de electricidad, la cual se regula actualmente según el Real Decreto-ley 9/2013, de 12 de Julio, por el que se adoptaron medidas urgentes para garantizar la estabilidad financiera del sistema eléctrico, y se consideran los criterios de sostenibilidad en el uso de biocombustibles sólidos. Se realiza una caracterización de las seis comarcas agrarias que forman la Comunidad Autónoma de Madrid: Área Metropolitana, Campiña, Guadarrama, Lozoya- Somosierra, Sur-Occidental y Vegas, la cual consta de dos partes: una descripción de la climatología y otra de la distribución de la superficie dedicada a barbecho y cultivos herbáceos. Se hace una recopilación bibliográfica de los modelos de simulación más representativos de crecimiento de los cultivos (CERES y Cereal YES), así como de ensayos realizados con los cultivos de centeno y triticale para la producción de biomasa y de estudios efectuados mediante herramientas GIS y técnicas de análisis multicriterio para la ubicación de centrales de bioelectricidad y el estudio de la logística de la biomasa. Se propone un modelo de simulación de la productividad de biomasa de centeno y de triticale para la CM, que resulta de la combinación de un modelo de producción de grano en base a datos climatológicos y a la relación biomasa/grano media de ambos cultivos obtenida en una experiencia previa. Los modelos obtenidos responden a las siguientes ecuaciones (siendo TN = temperatura media normalizada a 9,9 ºC y PN = precipitación acumulada normalizada a 496,7 mm): - Producción biomasa centeno (t m.s./ha) = 2,785 * [1,078 * ln(TN + 2*PN) + 2,3256] - Producción biomasa triticale (t m.s./ha) = 2,595 * [2,4495 * ln(TN + 2*PN) + 2,6103] Posteriormente, aplicando los modelos desarrollados, se cuantifica el potencial de producción de biomasa de centeno y triticale en las distintas comarcas agrarias de la CM en cada uno de los escenarios establecidos, que se consideran según el uso de la superficie de barbecho de secano disponible (25%, 50%, 75% y 100%). Las producciones potenciales de biomasa, que se podrían alcanzar en la CM utilizando el 100% de la superficie de barbecho de secano, en base a los cultivos de centeno y triticale, se estimaron en 169.710,72 - 149.811,59 - 140.217,54 - 101.583,01 - 26.961,88 y 1.886,40 t anuales para las comarcas de Campiña - Vegas, Sur - Occidental - Área Metropolitana - Lozoya-Somosierra y Guadarrama, respectivamente. Se realiza un análisis multicriterio basado en la programación de compromiso para definir las comarcas agrarias con mejores características para la ubicación de centrales de bioelectricidad en base a los criterios de potencial de biomasa, infraestructura eléctrica, red de carreteras, espacios protegidos y superficie de núcleos urbanos. Al efectuar el análisis multicriterio, se obtiene la siguiente ordenación jerárquica en base a los criterios establecidos: Campiña, Sur Occidental, Vegas, Área Metropolitana, Lozoya-Somosierra y Guadarrama. Mediante la utilización de técnicas GIS se estudia la localización más conveniente de una central de bioelectricidad de 2,2 MW en cada una de las comarcas agrarias y según el uso de la superficie de barbecho de secano disponible (25%, 50%, 75% y 100%), siempre que exista potencial suficiente. Para el caso de la biomasa de centeno y de triticale en base seca se considera un PCI de 3500 kcal/kg, por lo que se necesitarán como mínimo 17.298,28 toneladas para satisfacer las necesidades de cada una de las centrales de 2,2 MW. Se analiza el potencial máximo de bioelectricidad en cada una de las comarcas agrarias en base a los cultivos de centeno y triticale como productores de biomasa. Según se considere el 25% o el 100% del barbecho de secano para producción de biomasa, la potencia máxima de bioelectricidad que se podría instalar en cada una de las comarcas agrarias variaría entre 5,4 y 21,58 MW en la comarca Campiña, entre 4,76 y 19,05 MW en la comarca Vegas, entre 4,46 y 17,83 MW en la comarca Sur Occidental, entre 3,23 y 12,92 MW en la comarca Área Metropolitana, entre 0,86 y 3,43 MW en la comarca Lozoya Somosierra y entre 0,06 y 0,24 MW en la comarca Guadarrama. La potencia total que se podría instalar en la CM a partir de la biomasa de centeno y triticale podría variar entre 18,76 y 75,06 MW según que se utilice el 25% o el 100% de las tierras de barbecho de secano para su cultivo. ABSTRACT In this work is studied the potential biomass production from rye and triticale crops in the six Madrid Community (MC) agricultural regions and the possibility of its application to the bioelectricity production in each of them. First is performed a bibliographical study of the current situation of bioelectricity. One of the main elements to be considered is that in the PER 2011-2020 is estimated that the total installed electric power from biomass in Spain in 2020 was 1.350 MW, about two and a half times as at end 2010. Also is discussed the status of enhancing the use of biomass energy crops for electricity production, which is currently regulated according to the Real Decreto-ley 9/2013, of July 12, by which urgent measures were adopted to ensure financial stability of the electrical system, and there are considered the sustainability criteria in the use of solid biofuels. A characterization of the six Madrid Community agricultural regions is carried out: Area Metropolitana, Campiña, Guadarrama, Lozoya-Somosierra, Sur-Occidental and Vegas, which consists of two parts: a description of the climatology and another about the distribution of the area under fallow and arable crops. It makes a bibliographic compilation of the most representative crop growth simulation models (CERES and Cereal YES), as well as trials carried out with rye and triticale crops for biomass production and studies conducted by GIS tools and techniques multicriteria analysis for the location of bioelectricity centrals and the study of the logistics of biomass. Is proposed a biomass productivity simulation model for rye and triticale for MC that results from the combination of grain production model based on climatological data and the average relative biomass/grain of both crops obtained in a prior experience. The models obtained correspond to the following equations (where TN = normalized average temperature and PN = normalized accumulated precipitation): - Production rye biomass (t d.m./ha) = 2.785 * [1.078 * ln (TN + 2*PN) + 2.3256] - Production triticale biomass (t d.m./ha) = 2,595 * [2.4495 * ln (TN + 2*PN) + 2.6103] Subsequently, applying the developed models, the biomass potential of the MC agricultural regions is quantified in each of the scenarios established, which are considered as the use of dry fallow area available (25%, 50%, 75 % and 100%). The potential biomass production that can be achieved within the MC using 100% of the rainfed fallow area based on rye and triticale crops, were estimated at 169.710,72 - 149.811,59 - 140.217,54 - 101.583,01 - 26.961,88 and 1.886,40 t annual for the regions of Campiña, Vegas, Sur Occidental, Area Metropolitana, Lozoya- Somosierra and Guadarrama, respectively. A multicriteria analysis is performed, based on compromise programming to define the agricultural regions with better features for the location of bioelectricity centrals, on the basis of biomass potential, electrical infrastructure, road network, protected areas and urban area criteria. Upon multicriteria analysis, is obtained the following hierarchical order based on criteria: Campiña, Sur Occidental, Vegas, Area Metropolitana, Lozoya-Somosierra and Guadarrama. Likewise, through the use of GIS techniques, the most suitable location for a 2,2 MW bioelectricity plant is studied in each of the agricultural regions and according to the use of dry fallow area available (25%, 50% , 75% and 100%), if there is sufficient potential. In the case of biomass rye and triticale dry basis is considered a PCI of 3500 kcal/kg, so it will take at least 17,298.28 t to satisfy the needs of each plant. Is analyzed the maximum bioelectricity potential on each of the agricultural regions on the basis of the rye and triticale crops as biomass producers. As deemed 25% or 100% dry fallow for biomass, the maximum bioelectricity potential varies between 5,4 and 21,58 MW in the Campiña region, between 4,76 and 19,05 MW in the Vegas region, between 4,46 and 17,83 MW in the Sur Occidental region, between 3,23 and 12,92 MW in the Area Metropolitana region, between 0,86 and 3,43 MW in the Lozoya-Somosierra region and between 0,06 and 0,24 MW in the Guadarrama region. The total power that could be installed in the CM from rye and triticale biomass could vary between 18.76 and 75.06 MW if is used the 25% or 100% of fallow land for rainfed crop.

Antiguo Poblado de Algarrobito ubicado en el Valle del Elqui Chile, y su Patrón Urbano Bioclimático

La importancia de conocer bien el entorno para un proyecto arquitectónico es que podemos adaptarlo a nuestras necesidades fisiológicas de Confort Térmico. Podemos decir entonces que el edificio juega un papel fundamental como técnica de control de nuestro entorno. El edificio nos debería entregar un entorno controlado para que nos sintamos bien térmicamente, considerando además, que la arquitectura por sí misma puede lograr dicho confort la mayor parte de las veces. De no ser así, los usuarios tienden a colocar elementos mecánicos, para generar frío o calor artificialmente. Es fundamental entonces que nuestros edificios, tengan una correcta interacción con los recursos naturales del lugar para lograr dicho confort térmico. Pero lograr el Confort Térmico en todos los edificios de una ciudad como unidad, no logrará que la ciudad entera sea confortable térmicamente, ya que las complejas interacciones hacen que la problemática se deba enfrentar como algo sistémico. Esto quiere decir, que para que una ciudad o un conjunto logren la Confortabilidad Térmica deseada por sus habitantes debiera haber sido planificada conforme a variables urbanas que interactúen con el medio natural en forma eficiente. Con la observación de ciertos conjuntos habitacionales antiguos en el interior del Valle del Elqui, Chile y de sus relaciones entre variables urbanas y naturales, queda de manifiesto ciertas características que conllevan a pensar que existió una planificación ambiental en éstos que llevaron a lograr un conjunto con características bioclimáticas. Las evidencias de la existencia en primer lugar de un patrón urbanístico en dichos conjuntos habitacionales antiguos, hacen pensar que dicho patrón se trataría de un patrón bioclimático rural planificado, lo que hace que exista un gran interés por el estudio de estos conjuntos. Hasta ahora, en Chile, los pocos estudios de Confort Térmico que existen, están orientados a edificaciones aisladas, al Confort térmico interior de la edificación en el ámbito urbano, y en nada a Patrones Bioclimáticos de Conjuntos Habitacionales en una situación de ruralidad como a la referida en esta investigación. Además, los estudios referidos al clima urbano, difieren a los del clima rural, por lo que se necesitan mayores estudios aún para comprender mejor la problemática. Es por esto, que la mayoría de los casos mencionados en este estudio son contextualizados al ámbito urbano por carecer de otros estudios rurales. Es en este sentido que esta investigación cobra real importancia y pretende establecer la relación existente entre las variables morfológicas rurales y los recursos naturales del lugar y que generan un confort térmico ideal para sus habitantes, al mismo tiempo, se analiza la existencia de un Patrón Bioclimático en un poblado denominado Algarrobito ubicado en la cuenca del Valle del Elqui, Chile. Es en este sentido que el propósito principal de este trabajo es determinar la real existencia de un Patrón Bioclimático que relacione la morfología rural y edificada de los antiguos poblados pertenecientes a la cuenca del Valle de Elqui Chile con el microclima del lugar. La metodología empleada se basa en realizar primeramente el estudio del microclima del lugar a través de las Cartas Bioclimáticas. Para ello se obtuvo información de datos climatológicos de las estaciones meteorológicas ubicadas en la cuenca del Valle de Elqui, principalmente las más cercanas al lugar de estudio. Mediante una revisión exhaustiva de la información arquitectónica, así como de una labor de reconocimiento en terreno realizada en el poblado seleccionado y de la aplicación del Climograma local, se identificaron las diferentes zonas bioclimáticas del poblado antiguo y potenciales áreas de estudio en el conjunto. Esta actividad incluyó un estudio preliminar de la energía solar local, vientos, humedad, temperaturas y su interacción con el conjunto, permitiendo una primera aproximación a la problemática del espacio exterior y las viviendas. Esto permitió en base a las condicionantes del lugar, la arquitectura vernácula y los materiales descubrir un Patrón en el antiguo conjunto que permitía entregar confortabilidad térmica a sus habitantes y darse cuenta también, que el nuevo conjunto emplazado en el sector no seguía ese patrón con las disfuncionalidades que ello llevaba. Con esto quedó demostrado en primer lugar la existencia de un Patrón Bioclimático rural, los beneficios del patrón, la importancia de éste como causante de Confortabilidad Térmica del conjunto, y por ende de mejor eficiencia energética, así como también, que el nuevo conjunto no sigue para nada este Patrón, pero que existe también la posibilidad de rectificación y por supuesto, que los nuevos desarrollos residenciales del Valle del Elqui, puedan planificarse en base al patrón bioclimático descubierto. ABSTRACT Knowing the environment of an architectonic proyect is really important for adjusting it to our physiological needs of Thermal Comfort. So we can say that the building plays a key role as a technique of control of our environment. The building should give us a controlled environment to make us feel good thermally, and it usually can reach pleasurable temperatures by itself. If it isn't like that, people cooled or heated the ambience with mechanical elements. So a correct interaction between the buildings and natural resources is important to reach a thermal comfort. But achieving Thermal Comfort in all the buildings of a city as a unit will not achieve the whole city is thermally comfortable, because the complex interactions cause the problem needs to be solved as something systemic. This means that for a city or a set reach the Thermal Comfortability desired by its inhabitants, it should have been planned according to the urban variables that interact with the natural environment efficiently. Observing some old housing complexes in Elqui Valley, Chile, and the relationships between their natural and urban variables, some features lead to think that the environmental planning in these led to achieve a set with bioclimatic features. First, the evidences about the existence of an urban pattern in those old housing complexes, make thinking that the pattern would be a planned urban pattern, which generates interest in its study. In Chile, there have been few studies about Thermal Comfort, oriented to isolated buildings and indoor thermal comfort, but Bioclimatic Urban Patterns haven't been studied at all. In this sense, this investigation acquires a real importance and pretends to establish the relationship between urban variables and natural resources of the place that generates a good thermal comfort for its habitants. At the same time, the existence of a Bioclimatic Urban Pattern in Algarrobito, located in Elqui Valley basin, Chile, is analized. It is in this sense that the main purpose of this work is to determine the real existence of a Bioclimatic Urban Pattern, that links the urban and constructive form of the old villages of it with its microclimate. The methodology used is based on performing first the study of the microclimate of the place through the Bioclimatic Cards. To do this, weather stations, located in Elqui valley, near the place that was studied, were used to obtain information of climatological data. The different bioclimatic zones to the old town and potential areas of study in the set were identified, through an exhaustive review of the architectural information, a field reconnaissance work performed on the selected town and the application of the Local Climograph. This activity included a preliminary study of the local solar energy, the winds, the moisture, the temperatures, and their interaction with the set, allowing a first aproximation to troubles of outer space and housing. This allowed, based on the conditions of the place, vernacular architecture and materials, discovering an urban pattern in the old set, which allowed to give thermal comfort to its inhabitants and realize that the new set of the place did not follow this pattern, with the dysfunctions that it carried. These points demonstrated, in first place, the existence of a Bioclimatic Urban Pattern, the benefits of it, the importance of it as a cause of Thermal Comfortability, and therefore a better efficiency of energy, also that the new set doesn’t follow this Pattern at all, but that the posibility of rectification exists and, of course, that the new residencial development in Elqui Valley can be planned based on bioclimatic pattern discovered.

Benthic foraminifera of late Quaternary sediments in the northern North Atlantic

Four long sediment cores from locations in the Framstrait, the Norwegian-Greenland Seas and the northern North Atlantic were analysed in a high resolution sampling mode (1 - 2 cm density) for their benthic foraminiferal content. In particular the impact of the intense climatic changes at glacial/interglacial transitions (terminations I and II) on the benthic community have been of special interest. The faunal data were investigated by means of multivariate analysis and represented in their chronological occurence. The most prominent species of benthic foraminifera in the Norwegian-Greenland Seas are Oridorsalis umbonatus, Cibicidoides wuellerstorfi, the group of Cassidulina, Pyrgo rotalaria, Globocassidulina subglobosa and fragmented tubes of arenaceous species. The climatic signal of termination I as well as termination II is recorded in the fossil foraminiferal tests as divided transition from glacial to interglacial. The elder INDAR maximum (individuals accumulation rate = individuals/sq cm * 1.000 y; Norwegian-Greenland Seas: average 3.000 - 6.000 individuals/sq cm * 1.000 y; northern North Atlantic: average 150 individuals/sq cm * 1.000 y) is followed by a period of decreased values. The second, younger maximum reaches comparable values as the elder maximum. The interglacial INDAR are in average 700 individuals/sq cm * 1.000 y in the Norwegian-Greenland Seas and 200 individuals/sq cm * 1.000 y in average in the northern North Atlantic. The occurence of the elder INDAR maximum shows a distinct chronological transgressivity between the northern North Atlantic (12.400 ybp.) and the Framstrait (8.900 ybp.). The time shift from south to north amounts 3.500 yrs., the average expanding velocity 0,78 km per year. Within the Norwegian-Greenland Seas the average expanding velocity amounts 0,48 km per year. This chronological transgressivity is interpreted as impact of the progressive expanding of the North Atlantic and the Norwegian Current during the deglaciation. The dynamic of the faunal development is defined as increasing INDAR per time. The elder INDAR maximum shows in both glacial/interglacial transitions an exponential increase from south to north. Termination II is characterized by a general higher dynamic as termination I. By means of the high resolution sampling density the impact of regional isotopic recognized melt-water events is recognized by an increase of endobenthic and t-ubiquitous species in the Norwegian-Greenland Seas sediments. During termination I the relative minimum between both INDAR maxima occur chronological with an decrease of calculated sea surface temperatures. This is interpreted as indication of the close pelagic - benthic coupling. The climatic signal in the northern North Atlantic recorded in the fossil benthic foraminiferal community shows a lower amplitude as in the Norwegian-Greenland Seas. The occurence of the epibenthic Cibicidoides wuellersforfi allows to evaluate the variability of the bottom water mass. In general at all core locations increasing lateral bottom currents are recognized with the occurence of the second younger INDAR maximum. In comparison with various paleo-climatological data sets fossil benthic foraminifers show a distinct koherence with changes of the atmospheric temperatures, the SSTs and the postglacial sea level increase. The benthic foraminiferal fauna is bound indirectly on and indicative for regional climatic changes, but principal dependent upon global climatic changes.

Bulletin of the American Meteorological Society

List of members in v. 1, 8

Reducing uncertainties in estimation of wind effects on tall buildings using aerodynamic wind tunnel tests

Tall buildings are wind-sensitive structures and could experience high wind-induced effects. Aerodynamic boundary layer wind tunnel testing has been the most commonly used method for estimating wind effects on tall buildings. Design wind effects on tall buildings are estimated through analytical processing of the data obtained from aerodynamic wind tunnel tests. Even though it is widely agreed that the data obtained from wind tunnel testing is fairly reliable the post-test analytical procedures are still argued to have remarkable uncertainties. This research work attempted to assess the uncertainties occurring at different stages of the post-test analytical procedures in detail and suggest improved techniques for reducing the uncertainties. Results of the study showed that traditionally used simplifying approximations, particularly in the frequency domain approach, could cause significant uncertainties in estimating aerodynamic wind-induced responses. Based on identified shortcomings, a more accurate dual aerodynamic data analysis framework which works in the frequency and time domains was developed. The comprehensive analysis framework allows estimating modal, resultant and peak values of various wind-induced responses of a tall building more accurately. Estimating design wind effects on tall buildings also requires synthesizing the wind tunnel data with local climatological data of the study site. A novel copula based approach was developed for accurately synthesizing aerodynamic and climatological data up on investigating the causes of significant uncertainties in currently used synthesizing techniques. Improvement of the new approach over the existing techniques was also illustrated with a case study on a 50 story building. At last, a practical dynamic optimization approach was suggested for tuning structural properties of tall buildings towards attaining optimum performance against wind loads with less number of design iterations.

Zoneamento agroclimático da palma forrageira (Opuntia sp.) para o estado da Paraíba

The cactus pear has become over the years an important forage alternative for brazilian semiarid region, especially during long periods of drought. Despite its importance for agriculture, its cultivation has dispensed basic crop practices and fundamentals technical-scientific basis about its climatic requirements. Thus, the main objective of this study was to elaborate the agroclimatic zoning of cactus pear (Opuntia sp.) for the state of Paraíba. The agroclimatic zoning of cactus pear was based on climatic indicators outlined in the literature and climatological data of precipitation and temperature (mean, maximum, and minimum) from 97 locations in the state of Paraíba. According to the results, the region of ‘Borborema’ is the most favorable for the cultivation of cactus pear. The regions of ‘Agreste’, ‘Sertão’, and coastal part of Litoral may be used but with restrictions. However, the cultivation of cactus pear is recommended throughout the state of Paraíba, except the coastal part of the Litoral and the region around Areia. In both cases, the inability is due to excessive precipitation.

Borboletas no semiárido: sazonalidade e padrões de diversidade de borboletas frugívoras em um ambiente extremo

The spatial and temporal distribution of the population reflects the adjustment of their biological characteristics to environmental conditions and biotic interactions as adaptive and phylogenetic precursors elements. The habitat’s heterogeneity and alternating seasons tend to cause patterns of activity of organisms and species diversity. However, these seasonal and spatial patterns in butterfly communities in dry environments are not yet clear. We studied a community of frugivorous butterflies in ESEC Seridó, in northeastern Brazil, aiming to characterize the guild in semiarid and check the relative contribution of climate and vegetation variables on its composition, diversity and phenofaunistic. The butterflies were sampled monthly during one year, and the distribution of species was associated with structural characteristics of three vegetation types (eg. richness and abundance of tree and shrub species, canopy cover, herbaceous cover, litter) and climatological data (temperature, rainfall and humidity). We captured 9580 individuals of 16 species of butterflies belonging to four subfamilies (Biblidinae, Charaxinae, Nymphalinae and Satyrinae). The richness, abundance and diversity varied in different scales, especially in time, being higher in the rainy season, while the β-diversity and turnover was higher in the dry. The distribution of species mainly followed the changes in humidity, rainfall and vegetation phenology, with no defined boundaries between habitats. The flight period was shared within subfamilies, which should have distinct response to environmental stimuli, as well as respond to the phenology of host plants and have different reproductive strategies. There is even evidence of physiological and behavioral adaptations as seasonal reproduction and aestivation. So there was environmental control over the distribution and diversity of species, with the key role climate Association and vegetation structure in the community of differentiation in the seasons, and the availability and quality of resources on the variation of species abundance in small scales. These results may support the biomonitoring and conservation preserved areas, particularly in environments under human pressure and extreme environmental conditions such as semi-arid.