On the generation mechanisms of short-scale unbalanced modes in rotating two-layer flows with vertical shear

We report on the results of a laboratory investigation using a rotating two-layer annulus experiment, which exhibits both large-scale vortical modes and short-scale divergent modes. A sophisticated visualization method allows us to observe the flow at very high spatial and temporal resolution. The balanced long-wavelength modes appear only when the Froude number is supercritical (i.e. $F\,{>}\,F_\mathrm{critical}\,{\equiv}\, \upi^2/2$), and are therefore consistent with generation by a baroclinic instability. The unbalanced short-wavelength modes appear locally in every single baroclinically unstable flow, providing perhaps the first direct experimental evidence that all evolving vortical flows will tend to emit freely propagating inertia–gravity waves. The short-wavelength modes also appear in certain baroclinically stable flows. We infer the generation mechanisms of the short-scale waves, both for the baro-clinically unstable case in which they co-exist with a large-scale wave, and for the baroclinically stable case in which they exist alone. The two possible mechanisms considered are spontaneous adjustment of the large-scale flow, and Kelvin–Helmholtz shear instability. Short modes in the baroclinically stable regime are generated only when the Richardson number is subcritical (i.e. $\hbox{\it Ri}\,{<}\,\hbox{\it Ri}_\mathrm{critical}\,{\equiv}\, 1$), and are therefore consistent with generation by a Kelvin–Helmholtz instability. We calculate five indicators of short-wave generation in the baroclinically unstable regime, using data from a quasi-geostrophic numerical model of the annulus. There is excellent agreement between the spatial locations of short-wave emission observed in the laboratory, and regions in which the model Lighthill/Ford inertia–gravity wave source term is large. We infer that the short waves in the baroclinically unstable fluid are freely propagating inertia–gravity waves generated by spontaneous adjustment of the large-scale flow.

Cyclocreatine, an anticancer and neuroprotective agent. Spectroscopic, structural and theoretical study

The structural, spectroscopic and theoretical study of cyclocreatine (1-carboxymethyl-2-iminoimidazolidine, CyCre) has been performed prompted by the biological relevance of the molecule and its potential role as a ligand in biometalic compounds. The crystal structure of CyCre has been determined by X-ray diffraction methods. The compound crystallizes as a zwitterion in the monoclinic system, space group P2(1)/c. The crystal is further stabilized by a network of N-H center dot center dot center dot O bonds. Infrared and Raman spectra of the solid, electronic spectra of aqueous solutions at different pH values and (1)H and (13)C NMR spectra have been recorded and analyzed. Band assignments were accomplished with the help of theoretical calculations. Optimized molecular geometries, harmonic vibrational frequencies and molecular electrostatic potentials were calculated using methods based on the density functional theory. (C) 2010 Elsevier B.V. All rights reserved.

Estrutura e heterogeneidade da paisagem de uma unidade de conservação no nordeste do Pantanal (RPPN SESC Pantanal), Mato Grosso, Brasil : efeitos sobre a distribuição e densidade de antas (Tapirus terrestris) e de cervos-do-pantanal (Blastocerus dichotomus)

A RPPN SESC-Pantanal, em Barão de Melgaço, MT, apresenta características em grande parte associadas à fisionomia do cerrado, com áreas mais secas em relação às regiões localizadas mais ao sul e a oeste do Pantanal. O mapa de cobertura do solo, produzido através de classificação não-supervisionada de imagens de satélite, identificou 18 classes de cobertura e nove domínios fisionômicos, que correspondem a uma representação sintética da distribuição das unidades da paisagem na Reserva. O desenvolvimento apropriado de estratégias de manejo e de conservação fundamenta-se principalmente no conhecimento da fauna regional, ressaltado pela sua abundância e formas de uso da área. A anta, Tapirus terrestris, e o cervo-do-pantanal, Blastocerus dichotomus, são elementos bastante comuns na paisagem da RPPN. A estimativa do tamanho da população de antas na região de estudo foi de 581 indivíduos; a densidade (0,71 ind./km2), no conjunto das fisionomias florestais da região, foi 92% mais elevada do que para as formações campestres (0,37 ind./km2). O tamanho populacional estimado para o cervo-do-pantanal foi de 135 indivíduos (0,44 ind./km2) para o período seco, e 157 indivíduos (0,73 ind./km2) para o período úmido. Com base nos modelos de distribuição gerados, nos resultados obtidos via o Índice de Seleção e nas estimativas de densidade, pode-se inferir sobre a qualidade dos hábitats para as espécies. As Matas com Acuri (Scheelea phalerata) são de elevada importância para T. terrestris, embora a espécie tenha ampla distribuição na Reserva. B. dichotomus tem sua maior população no Pantanal e, na Reserva, está em condição peculiar em relação à descrita como característica para a espécie: ocupa hábitats mais secos do que na maior parte de sua área de ocorrência Os hábitats campestres, relacionados à presença de murundus, foram selecionados positivamente pela espécie. A análise espacial em diferentes escalas foi fundamental para evidenciar a importância de corpos d’água (tanques ou baías) na previsão da ocorrência da espécie: as zonas de maior probabilidade dispõem-se na forma de núcleos centrados na rede de tanques, na área central da Reserva e nas adjacências de baías na porção leste da UC. As análises demonstraram uma hierarquia no uso dos hábitats, tanto para T. terrestris quanto para B. dichotomus, permitindo identificar zonas onde as chances são maiores de ocorrência das espécies, uma expressão de conjuntos de fatores que devem se aproximar do ótimo para as espécies no contexto da paisagem estudada.

The relationships of alternative energies with the technology sector and non-renewable energies

Este trabalho tem como objectivo compreender de que forma os investidores veem as energias renováveis: se as veem como parte do sector tecnológico, à espera de novos desenvolvimentos, ou como uma alternativa aos métodos existentes de produção de energia. Para responder a esta questão, foi desenvolvido um modelo de vectores autoregressivos com quatro variáveis de forma a se poder aplicar um Granger causality test e Impulse Response function. Os resultados sugerem que para o período de 2002-2007 à escala global ambas as hipóteses se confirmam, porém de 2009-2014 os resultados sugerem que os investidores não reconhecem as energias renováveis como um ramo do sector tecnológico, neste período. Para além disso, durante o período de 2009-2014, e quando comparados investidores Americanos com Europeus, os resultados sugerem que apenas o último identifica as energias renováveis como uma fonte viável para a produção energética.

Central cholinergic blockade reduces the pressor response to L-glutamate into the rostral ventrolateral medullary pressor area

Injections of the excitatory amino acid L-glutamate (L-glu) into the rostral ventrolateral medulla (RVLM) directly activate the sympathetic nervous system and increase mean arterial pressure (MAP). A previous study showed that lesions of the anteroventral third ventricle region in the forebrain reduced the pressor response to L-glu into the RVLM. In the present study we investigated the effects produced by injections of atropine (cholinergic antagonist) into the lateral ventricle (LV) on the pressor responses produced by L-ghl into the RVLM. Male Holtzman rats (280-320 g, n=5 to 12/group) with stainless steel cannulas implanted into the RVLM, LV or 4th ventricle (4th V) were used. MAP and heart rate (HR) were recorded in unanesthetized rats. After saline into the LV, injections of L-glu (5 nmol/100 nl) into the RVLM increased MAP (51 +/- 4 mm Hg) without changes in HR. Atropine (4 nmol/1 PI) injected into the LV reduced the pressor responses to L-glu into the RVLM (36 +/- 5 mm Hg), However, atropine at the same dose into the 4th V or directly into the RVLM did not modify the pressor responses to L-glu into the RVLM (45 +/- 2 and 49 +/- 4 mm Hg, respectively, vs. control: 50 +/- 4mmHg). Central cholinergic blockade did not affect baro and chemoreflex nor the basal MAP and HR. The results suggest that cholinergic mechanisms probably from forebrain facilitate or modulate the pressor responses to L-glu into the RVLM. The mechanism is activated by acetylcholine in the forebrain, however, the neurotransmitter released in the RVLM to facilitate the effects of glutamate is not acetylcholine. (C) 2007 Elsevier B.V. All rights reserved.

Produção de genótipos de tomateiro tipo 'Salada' no período de inverno, em Araguari

O trabalho foi desenvolvido em Araguari (MG), na época de inverno, com o objetivo de verificar o desempenho agronômico de genótipos de tomateiro tipo 'Salada'. Utilizou-se o delineamento experimental de blocos casualizados com 18 tratamentos e quatro repetições. As colheitas iniciaram 76 dias após o transplante, de 03/08/1996 a 05/10/1996, para a maioria dos genótipos, sendo feito um total de 18 colheitas. Como resultado os genótipos T-8, T-10, Barão Vermelho AG-561, Carmen, Agora e Olimpo superaram significativamente as demais em produtividade comercial, variando de 125,3 t/ha (Olimpo) a 142,6 t/ha (T-8), sendo portanto recomendáveis para a região, no período de inverno. Mais de 60% dos genótipos tiveram frutos com peso médio superior a 200 g, com destaque para Barão Vermelho AG-561 (259,50 g) e Sunbolt (255,75 g) que apresentaram mais de 30% de frutos do tipo extra AA, sendo superados apenas pelo genótipo Carmen, porém com padrão de fruto bem diferente em tamanho. Com mais de 44% de frutos tipo extra A destacaram-se os genótipos Super Marmande, T-8, Sunbeam e AG-233. O genótipo Agora destacou-se com frutos do tipo primeira (59,70%).

Prótesis radífera: Alternativa en el tratamiento de neoplasias de cabeza y cuello

Radipherpus protheses are a means of treatment for malignant tumor-carrying patients. These protheses are used in cases of brachytherapy or external actinotherapy by contact and allow treating them with high radiation doses that are quickly released from the areas next to tumor, so that the radiations be restricted to the affected region, without the emissions damaging or destroying the soft tissues. Based on these considerations, the present paper was aimed at making literature review on the use of radipherous protheses for the treatment of head and neck neoplasias. © 2006 1995, Editorial Ciencias médicas.

Overdenture as a restorative option for hypocalcified-hypoplastic amelogenesis imperfecta: a case report.

AIM: The aim of this report is to describe the restorative treatment of an 18-year-old patient diagnosed with autosomal recessive hypocalcified-hypoplastic amelogenesis imperfecta (AI). BACKGROUND: Esthetic and functional rehabilitations in AI cases are challenging and should consider individual aspects, such as age, socioeconomic status, AI type, and intraoral condition. REPORT: AI was diagnosed in an 18-year-old patient. SUMMARY: Considering the short length of crowns and roots, patient life expectancy, minimal invasiveness, amount of treatment time required, and lower costs, oral rehabilitation with overdentures provided an adequate functional and esthetic rehabilitation of the patient. CLINICAL SIGNIFICANCE: This report demonstrated overdentures to be a viable, relatively inexpensive, and non-invasive treatment choice of a patient with AI with concerns about treatment longevity, invasiveness, cost, esthetics, and long-term maintenance.

Effect of storage in artificial saliva and thermal cycling on Knoop hardness of resin denture teeth

Purpose: This study aimed to evaluate the effect of different storage periods in artificial saliva and thermal cycling on Knoop hardness of 8 commercial brands of resin denture teeth. Methods: Eigth different brands of resin denture teeth were evaluated (Artplus group, Biolux group, Biotone IPN group, Myerson group, SR Orthosit group, Trilux group, Trubyte Biotone group, and Vipi Dent Plus group). Twenty-four teeth of each brand had their occlusal surfaces ground flat and were embedded in autopolymerized acrylic resin. After polishing, the teeth were submitted to different conditions: (1) immersion in distilled water at 37 ± 2 °C for 48 ± 2. h (control); (2) storage in artificial saliva at 37 ± 2 °C for 15, 30 and 60 days, and (3) thermal cycling between 5 and 55 °C with 30-s dwell times for 5000 cycles. Knoop hardness test was performed after each condition. Data were analyzed with two-way ANOVA and Tukey's test (α= .05). Results: In general, SR Orthosit group presented the highest statistically significant Knoop hardness value while Myerson group exhibited the smallest statistically significant mean (P< .05) in the control period, after thermal cycling, and after all storage periods. The Knoop hardness means obtained before thermal cycling procedure (20.34 ± 4.45 KHN) were statistically higher than those reached after thermal cycling (19.77 ± 4.13 KHN). All brands of resin denture teeth were significantly softened after storage period in artificial saliva. Conclusion: Storage in saliva and thermal cycling significantly reduced the Knoop hardness of the resin denture teeth. SR Orthosit denture teeth showed the highest Knoop hardness values regardless the condition tested. © 2010 Japan Prosthodontic Society.

Evaluation of a two-step pouring technique for implant-supported prostheses impression

The aim of this study was to evaluate the efficacy of a pouring technique for implant-supported prostheses impressions. A metallic matrix (control group) with two implants positioned at 90 and 65 degrees was fabricated. The matrix was submitted to the direct transfer impression technique. In group CP (conventional pouring - n = 10), casts were obtained by the conventional pouring technique. In group EP (experimental pouring - n = 10), the analogs were embraced with latex tubes before the first pouring and then submitted to a second pouring. Vertical misfit and implants/analogs inclinations were evaluated. Data were analyzed by analysis of variance and Tukey's test (p < .05). Results demonstrated significant difference (p < .05) between control and experimental groups for misfit measurement in perpendicular implant/analog and between control group and group EP in leaning implant/analog. Considering inclination, there were significant differences (p < .05) between control and experimental groups for leaning analogs. Independently of the pouring technique, perpendicular implants produced more accurate casts.

Effect of unilateral misfit on preload of retention screws of implant-supported prostheses submitted to mechanical cycling

Purpose: The aim of this study was to evaluate the effect of different levels of unilateral angular misfit on preload maintenance of retention screws of single implant-supported prostheses submitted to mechanical cycling. Materials and methods: Premachined UCLA abutments were cast with cobalt-chromium alloy to obtain 48 crowns divided into four groups (n=12). The crowns presented no misfit in Group A (control group) and unilateral misfits of 50μm, 100μm and 200μm in the groups B, C and D, respectively. The crowns were attached to external hexagon implants with a titanium retention screw with torque of 30N/cm. Oblique loading of 130N at 2Hz was applied on each replica, totalizing 5×104 and 1×106cycles. Detorque values were measured initially and after each cycling period. Data were evaluated by analysis of variance and Tukey's HSD test (p<0.05). Results: All groups presented reduced initial detorque values (p< 0.05) in comparison to the insertion torque (30. ± 0.5. N/cm) and Group A (25.18. N/cm) exhibited the lowest reduction. After mechanical cycling, all groups presented detorque values from 19.5. N/cm to 22.38. N/cm and the mechanical cycling did not statistically influence the detorque values regardless the misfit level of the replicas. Conclusion: The unilateral misfit influenced the preload maintenance only before mechanical cycling. The mechanical cycling did not influence the torque reduction. © 2010 Japan Prosthodontic Society.

Effect of occlusal splint treatment on the temperature of different muscles in patients with TMD

Purpose: The aim of this study was to evaluate the effect of occlusal splint treatment on the temperature of masseter (inferior, intermediate and superior), anterior temporal, digastric and trapezius muscles in patients with temporomandibular disorder (TMD). Materials and methods: Thirty patients (6 male and 24 female) aged from 16 to 57 years (mean 37.8. ± 11.4 years) were selected. The patients were diagnosed with muscular TMD by clinical examination (application of Research Diagnostic Criteria questionnaire and physical examination). Occlusal splints in acrylic resin were inserted in all patients with a weekly follow-up. The superficial thermography (°C) on the both sides of the muscles was performed using a digital thermometer in a controlled temperature room. This procedure was performed before occlusal splint insertion (patient with pain) and after the completion of the treatment (patient without pain). The data were analyzed by 2-way repeated-measures ANOVA and means were compared by Tukey HSD test (P< .05). Results: After occlusal splint treatment a significant increase in temperature was observed in each muscle, both in the right and left sides. When the muscles were compared in the same period (before or after therapy) there was no significant difference among them. Conclusion: It can be concluded that the use of occlusal splint promoted a significant increase on the muscles temperature. There was symmetry in the temperature of muscles on the right and left sides both before and after the treatment. © 2010 Japan Prosthodontic Society.

Primeiro registro de Harpia harpyja para o bioma Pantanal, com dados sobre atividade reprodutiva

The first reliable encounter of the Harpy Eagle Harpia harpyja in the Pantanal floodplains is reported, with information on its breeding activity in the region, as well as some prey. A nest was found in August 2009, located in Barão de Melgaço County, northern portion of the Pantanal, with a 60-90-day-old eaglet. After a windy storm on August 30, the nest fell, causing the death of the nestling. In March 2010 another nest was located about 2.6 km distant from the first. We emphasize the importance of this record, and the need for a monitoring program to evaluate the true status of the Harpy Eagle in the northern portion of the Pantanal and nearby areas.

The use of fragments of thin veneers as a restorative therapy for anterior teeth disharmony: A case report with 3 years of follow-up

Aim: The present case report described the use of contact lens of thin porcelain veneers as a restorative therapy to solve anterior teeth disharmony. Background: Fragments of thin veneers are minimally invasive restorations with little or no dental preparation and present thickness ranging from 0.2 to 0.5 mm. They are used in case of diastema closure, small changes of teeth, color and restoration of teeth with small fractures. Case report: A 25-year-old man was admitted at a dental clinic complaining about the diastema presence on the upper anterior teeth. Patient was referred to an orthodontic treatment in order to provide better distribution of the diastemas and harmonious proportion of the teeth. Afterwards, contact lens of thin porcelain veneers were fabricated on the six upper anterior teeth. Conclusion: Based on the outcomes of this clinical report, we considered the use of fragments of thin veneers as a successful treatment option after 3 years of follow-up. Clinical significance: The fragments of thin veneers have been established to be an interesting alternative to esthetically restore the anterior teeth with minimal invasiveness. However, since it is a new treatment modality, longitudinal studies are necessary to understand the material's behavior.

Comparison of different designs of implant-retained overdentures and fixed full-arch implant-supported prosthesis on stress distribution in edentulous mandible - A computed tomography-based three-dimensional finite element analysis

A finite element analysis was used to compare the effect of different designs of implant-retained overdentures and fixed full-arch implant-supported prosthesis on stress distribution in edentulous mandible. Four models of an human mandible were constructed. In the OR (O'ring) group, the mandible was restored with an overdenture retained by four unsplinted implants with O'ring attachment; in the BC (bar-clip) -C and BC groups, the mandibles were restored with overdentures retained by four splinted implants with bar-clip anchor associated or not with two distally placed cantilevers, respectively; in the FD (fixed denture) group, the mandible was restored with a fixed full-arch four-implant-supported prosthesis. Models were supported by the masticatory muscles and temporomandibular joints. A 100-N oblique load was applied on the left first molar. Von Mises (σvM), maximum (σmax) and minimum (σmin) principal stresses (in MPa) analyses were obtained. BC-C group exhibited the highest stress values (σvM=398.8, σmax=580.5 and σmin=-455.2) while FD group showed the lowest one (σvM=128.9, σmax=185.9 and σmin=-172.1). Within overdenture groups, the use of unsplinted implants reduced the stress level in the implant/prosthetic components (59.4% for σvM, 66.2% for σmax and 57.7% for σmin versus BC-C group) and supporting tissues (maximum stress reduction of 72% and 79.5% for σmax, and 15.7% and 85.7% for σmin on the cortical and trabecular bones, respectively). Cortical bone exhibited greater stress concentration than the trabecular bone for all groups. The use of fixed implant dentures and removable dentures retained by unsplinted implants to rehabilitate edentulous mandible reduced the stresses in the periimplant bone tissue, mucosa and implant/prosthetic components. © 2013 Elsevier Ltd.