Global analysis of aerodynamics deflectors efficiency in the grinding process

The conventional, grinding methods in some cases are not very efficient because the arising of thermal damages in the pieces is very common. Optimization methods of cutting fluid application in the grinding zone are essential to prevent thermal problems from interaction of the wheel grains with the workpiece. surface. The optimization can happen through the correct selection of the cut parameters and development of devices that eliminate air layer effects generated around the grinding wheel. This article will collaborate with the development of an experimentation methodology which allows evaluating, comparatively, the performance of the deflectors in the cutting region to minimize the air layer effect of the high speed of the grinding wheel. The air layers make the cutting fluid jet to dissipate in the machine. An optimized nozzle was used in order to compare the results with the conventional method (without baffles or deflectors) of cutting fluid application. The results showed the high eficciency of the deflectors or baffles in the finish results. Copyright © 2006 by ABCM.

Densitometric analysis of the autogenous demineralized dentin matrix on the dental socket wound healing process in humans

The aim of this study was to evaluate the effects of the autogenous demineralized dentin matrix (ADDM) on the third molar socket wound healing process in humans, using the guided bone regeneration technique and a polytetrafluoroethylene barrier (PTFE). Twenty-seven dental sockets were divided into three groups: dental socket (Control), dental socket with PTFE barrier (PTFE), and dental socket with ADDM slices associated to PTFE banier (ADDM + PTFE). The dental sockets were submitted to radiographic bone densitometry analysis and statistical analysis on the 15th, 30th, 60th and 90th days using analysis of variance (ANOVA) and Tukey's test (p ≤ 0.05). The radiographic analysis of the ADDM + PTFE group showed greater homogeneity of bone radiopacity than the Control group and the PTFE group, during all the observation times. The dentin matrix gradually disappeared from the dental socket during the course of the repair process, suggesting its resorption during the bone remodeling process. It was concluded that the radiographic bone density of the dental sockets treated with ADDM was similar to that of the surrounding normal bone on the 90th day. The ADDM was biocompatible with the bone tissue of the surgical wounds of human dental sockets. The radiographic analysis revealed that the repair process was discreetly faster in the ADDM + PTFE group than in the Control and PTFE groups, although the difference was not statistically significant. In addition, the radiographic image of the ADDM + PTFE group suggested that its bone architecture was better than that of the Control and PFTE groups.

Morphological and molecular analysis of the collagen fibers in inflammatory process

Collagen makes up one third of the total protein in humans, being formed by the connection of three polypeptide chains arranged in a triple helix. This protein has fundamental importance in the formation of extracellular matrix of connective tissue. This study aimed to analyze the structural changes of collagen, which are resulting from inflammatory processes in oral mucosa, and to make the comparative analysis between the histopathology and the Raman spectra. The samples of tissues with inflammatory fibrous hyperplasia (IFH) and normal mucosa (NM) were evaluated by Raman Spectroscopy, hematoxylin-eosin and Massons trichrome stain. The histological analysis in both stains showed differences in collagen fibers, which was presented as thin fibers and arranged in parallel direction in NM and as collagen fibers are thick, mature and not organized, showing that these types of stain show morphological changes of collagen in IFH. The Raman Spectroscopy discriminate the groups of NM and IFH based on vibrational modes of proline, hydroxiproline and CH3, CH2. The histological stains only shows information from morphological data, and can be complemented by Raman spectra. This technique could demonstrate that inflammatory process caused some changes in collagen structure which is related to aminoacids such as proline and hidroxyproline. © 2011 SPIE-OSA.

Mathematical modeling and analysis of the flocculation process in chambers in series

In this study, the flocculation process in continuous systems with chambers in series was analyzed using the classical kinetic model of aggregation and break-up proposed by Argaman and Kaufman, which incorporates two main parameters: K (a) and K (b). Typical values for these parameters were used, i. e., K (a) = 3.68 x 10(-5)-1.83 x 10(-4) and K (b) = 1.83 x 10(-7)-2.30 x 10(-7) s(-1). The analysis consisted of performing simulations of system behavior under different operating conditions, including variations in the number of chambers used and the utilization of fixed or scaled velocity gradients in the units. The response variable analyzed in all simulations was the total retention time necessary to achieve a given flocculation efficiency, which was determined by means of conventional solution methods of nonlinear algebraic equations, corresponding to the material balances on the system. Values for the number of chambers ranging from 1 to 5, velocity gradients of 20-60 s(-1) and flocculation efficiencies of 50-90 % were adopted.

Multi-scale structural and chemical analysis of sugarcane bagasse in the process of sequential acid-base pretreatment and ethanol production by Scheffersomyces shehatae and Saccharomyces cerevisiae

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Paricipation in Bauru marter plans, Brazil: analysis of the historical evolution of the consultation process

In Brazil, a policy on citizen participation and consultation in urban intervention programs, in particular in the development of master plans, was first introduced into the Federal Constitution in 1988. This article presents an historical reconstitution of Master Plans in Bauru – State of São Paulo – Brazil. The 1968, 1988 and 2005/2006 consultation methods are analyzed using established criteria. The degree of community participation in the processes is estimated by drawing on a typology based on the level of involvement by residents. The effects of participation caused by changes in political regime, technical planning vision, legal support to consultation, recognition of community importance and knowledge acquired during the process are highlighted and discussed.

Alternatives exist: analysis of scientific literature in two Brazilian journals about the pedagogical work of Physical Education

Considering that the process of teacher training in universities takes into account the confrontation of knowledge produced by the scientific methods, the current study intended to identify what are the main contributions of the Brazilian scientific production of Physical Education teaching. Therefore, an exploratory study was done from the articles published on the subject in the two main periodicals of the area. The data analyzes allowed us to verify the relevancy of the knowledge produced and to suggest alternatives to its inclusion in the docent training programs.

Alternative Tasks for the Teaching and the Learning of functions: analysis of an intervention in the High School

In this paper we focus on the application of two mathematical alternative tasks to the teaching and learning of functions with high school students. The tasks were elaborated according to the following methodological approach: (i) Problem Solving and/or mathematics investigation and (ii) a pedagogical proposal, which defends that mathematical knowledge is developed by means of a balance between logic and intuition. We employed a qualitative research approach (characterized as a case study) aimed at analyzing the didactic pedagogical potential of this type of methodology in high school. We found that tasks such as those presented and discussed in this paper provide a more significant learning for the students, allowing a better conceptual understanding, becoming still more powerful when one considers the social-cultural context of the students.

VIBRATIONAL ANALYSIS OF COORDINATION COMPOUNDS OF NICKEL (II): AN APPROACH TO THE TEACHING OF POINT GROUPS

VIBRATIONAL ANALYSIS OF COORDINATION COMPOUNDS OF NICKEL (II): AN APPROACH TO THE TEACHING OF POINT GROUPS. This paper presents an IR and Raman experiment executed during the teaching of the course "Chemical Bonds" for undergraduated students of Science and Technology and Chemistry at the Federal University of ABC, in order to facilitate and encourage the teaching and learning of group theory. Some key aspects of this theory are also outlined. We believe that student learning was more significant with the introduction of this experiment, because there was an increase in the discussions level and in the performance during evaluations. This work also proposes a multidisciplinary approach to include the use of quantum chemistry tools.

Analysis of the introduction of a business process mapping system in Rosetti Marino spa

After a first theoric introduction about Business Process Re-engineering (BPR), are considered in particular the possible options found in literature regarding the following three macro-elements: the methodologies, the modelling notations and the tools employed for process mapping. The theoric section is the base for the analysis of the same elements into the specific case of Rosetti Marino S.p.A., an EPC contractor, operating in the Oil&Gas industry. Rosetti Marino implemented a tool developped internally in order to satisfy its needs in the most suitable way possible and buit a Map of all business processes,navigable on the Company Intranet. Moreover it adopted a methodology based upon participation, interfunctional communication and sharing. The GIGA introduction is analysed from a structural, human resources, political and symbolic point of view.

Bringing results to fruition through publication: An analysis of a peer-reviewed, open access and context-focused journal's editorial practice

When it comes to helping to shape sustainable development, research is most useful when it bridges the science–implementation/management gap and when it brings development specialists and researchers into a dialogue (Hurni et al. 2004); can a peer-reviewed journal contribute to this aim? In the classical system for validation and dissemination of scientific knowledge, journals focus on knowledge exchange within the academic community and do not specifically address a ‘life-world audience’. Within a North-South context, another knowledge divide is added: the peer review process excludes a large proportion of scientists from the South from participating in the production of scientific knowledge (Karlsson et al. 2007). Mountain Research and Development (MRD) is a journal whose mission is based on an editorial strategy to build the bridge between research and development and ensure that authors from the global South have access to knowledge production, ultimately with a view to supporting sustainable development in mountains. In doing so, MRD faces a number of challenges that we would like to discuss with the td-net community, after having presented our experience and strategy as editors of this journal. MRD was launched in 1981 by mountain researchers who wanted mountains to be included in the 1992 Rio process. In the late 1990s, MRD realized that the journal needed to go beyond addressing only the scientific community. It therefore launched a new section addressing a broader audience in 2000, with the aim of disseminating insights into, and recommendations for, the implementation of sustainable development in mountains. In 2006, we conducted a survey among MRD’s authors, reviewers, and readers (Wymann et al. 2007): respondents confirmed that MRD had succeeded in bridging the gap between research and development. But we realized that MRD could become an even more efficient tool for sustainability if development knowledge were validated: in 2009, we began submitting ‘development’ papers (‘transformation knowledge’) to external peer review of a kind different from the scientific-only peer review (for ‘systems knowledge’). At the same time, the journal became open access in order to increase the permeability between science and society, and ensure greater access for readers and authors in the South. We are currently rethinking our review process for development papers, with a view to creating more space for communication between science and society, and enhancing the co-production of knowledge (Roux 2008). Hopefully, these efforts will also contribute to the urgent debate on the ‘publication culture’ needed in transdisciplinary research (Kueffer et al. 2007).

Privatization in Bosnia and Herzegovina: Insights from and into the craft of interorganizational process analysis.

International efforts to help Bosnia and Herzegovina privatize its state-owned enterprises proved dif.cult, but the complex web of interorganizational relationships (IORs) among international donors, implementers, contractors, and local players, at times, seemed even more daunting to effective implementation of reforms than the technical dif.culties of the task itself. By employing a theoretical framework of IOR development over time, important stages in the evolution of the International Advisory Group on Privatization were identi.ed, and variables within each discussed. Analysis employed linear and nonlinear process logics to help explain what linked some variables withinand betweenthese various phases. Insights seemed valuable for practitioners seeking to implement interdependent tasks, organizational representatives trying to form relationships with others, and scholars trying to understand process theories of IOR formation. In addition, this research provides an introduction to the complexities of international development assistance — a crucially important and under-researched arena.

Mass Transport Perspective on an Accelerated Exclusion Process: Analysis of Augmented Current and Unit-Velocity Phases

In an accelerated exclusion process (AEP), each particle can "hop" to its adjacent site if empty as well as "kick" the frontmost particle when joining a cluster of size ℓ⩽ℓ_{max}. With various choices of the interaction range, ℓ_{max}, we find that the steady state of AEP can be found in a homogeneous phase with augmented currents (AC) or a segregated phase with holes moving at unit velocity (UV). Here we present a detailed study on the emergence of the novel phases, from two perspectives: the AEP and a mass transport process (MTP). In the latter picture, the system in the UV phase is composed of a condensate in coexistence with a fluid, while the transition from AC to UV can be regarded as condensation. Using Monte Carlo simulations, exact results for special cases, and analytic methods in a mean field approach (within the MTP), we focus on steady state currents and cluster sizes. Excellent agreement between data and theory is found, providing an insightful picture for understanding this model system.