Utilización de ingredientes tradicionales y nuevos productos derivados del haba de soja en piensos de lechones blancos e ibéricos: efectos sobre la fisiología digestiva y la productividad

Los objetivos principales de esta Tesis Doctoral fueron estudiar en 4 ensayos los efectos a) del procesado del maíz y la inclusión en los piensos de ingredientes de alta calidad como harina de pescado o fuentes de lactosa en lechones blancos b) inclusión en el pienso de diferentes productos derivados del haba de soja, con diferente contenido de proteína bruta (PB), tamaño de partícula y origen en lechones blancos e ibéricos y c) inclusión en el pienso de lechones ibéricos de ingredientes de alta calidad; forma de presentación del pienso y la duración del suministro del pienso prestárter sobre los parámetros productivos, la digestibilidad de los nutrientes, y las características morfológicas de la mucosa digestiva en lechones blancos e ibéricos recién destetados. En el experimento 1, los efectos de la complejidad del pienso prestárter sobre los parámetros productivos y la digestibilidad total aparente (TTAD) de los nutrientes fueron estudiados en lechones blancos recién destetados. Se utilizaron 10 tratamientos experimentales como resultado de 5 piensos prestárter (21 a 41 d de edad) y 2 piensos estárter (42 a 62 d de edad). Los piensos prestárter consistieron en un control negativo que incluía 40% de maíz crudo, 4% de harina de pescado y 7% de lactosa, un control positivo que incluía 40% de maíz cocido, 10% de harina de pescado, y 14% de lactosa, y 3 piensos adicionales con similares ingredientes que el pienso control positivo pero en los que a) 40% de maíz cocido fue sustituido por el mismo porcentaje de maíz crudo, b) se redujo el nivel de harina de pescado del 10 al 4%, y c) se redujo el nivel de lactosa del 14 al 7%. Cada tratamiento se replicó 6 veces (6 lechones/departamento). De 42 a 62 d de edad, la mitad de cada uno de los 5 piensos prestárter recibió un pienso estándar compuesto por harina de soja- maíz crudo y manteca y la otra mitad un pienso con similar perfil nutricional pero incluyendo un 20% de maíz cocido, 5% de harina de pescado, 1.3% de lactosa, 2% de concentrado de proteína de soja obtenido por fermentación y 1% de aceite de soja en lugar de harina de soja, maíz sin procesar y manteca. La complejidad del pienso no afectó a los parámetros productivos en ninguno de los periodos estudiados, pero el índice de diarreas durante la fase prestárter fue mayor en los lechones que recibieron el pienso control negativo que en los alimentados con cualquiera de los otros piensos (P<0.05). A los 30 días de edad (piensos prestárter), la digestibilidad de la materia orgánica (MO) y de la energía bruta (EB) fue menor (P<0.001) en los lechones que consumieron el pienso control negativo que en los lechones que consumieron cualquiera de los otros piensos. Sin embrago, la digestibilidad fecal de la PB no fue afectada. A los 50 días de edad (piensos estárter), la digestibilidad de los nutrientes fue similar en ambos piesnsos. Se concluye que la utilización de niveles elevados de ingredientes de alta calidad en los piensos no mejora los parámetros productivos de los lechones blancos en ninguno de los períodos estudiados. De 21 a 41 días de edad, el índice de diarreas se redujo y la digestibilidad de los nutrientes aumentó con la utilización de piensos de mayor calidad. Por lo tanto, la utilización de piensos con niveles elevados de ingredientes de calidad para reducir problemas digestivos y por lo tanto, mejorar los parámetros productivos podría estar justificada en algunos casos. En el experimento 2, se estudiaron los efectos de la inclusión en el pienso de harina de soja con diferente contenido de PB (44 vs. 49 % PB), la micronización de la harina de soja de alta proteína (AP-HS; 49% PB) y la utilización de concentrado de proteína de soja (CPS; 65% PB) sobre los parámetros productivos y la TTAD de los nutrientes en lechones blancos recién destetados de 28 a 63 días de edad. De 28 a 49 días de edad (fase I), hubo un pienso control positivo con un 10% de CPS, un pienso control negativo con 14.8% de harina de soja estándar (R-HS; 44% de PB) y otros 4 piensos que incluían 13.3% de AP-HS de origen Americano (USA) o Argentino (ARG) y molidas groseramente (980 μm) o micronizadas (80 μm). Cada tratamiento se replicó 8 veces (6 lechones/departamento). De 49 a 63 días de edad (fase II), todos los lechones recibieron un pienso comercial común en forma de harina. En el global de la fase I, el tratamiento experimental no afectó a ninguno de los parámetros productivos estudiados. Sin embargo, de 28 a 35 días de edad, los lechones alimentados con AP-HS micronizadas tuvieron un mejor índice de conversión (IC; 1.11 vs. 0.98; P<0.05) que los alimentados con AP-HS molidas groseramente. También, de 35 a 42 días de edad, los lechones que recibieron el pienso con AP-HS micronizada tendieron (P=0.08) a consumir más pienso que los lechones que consumieron el pienso con AP-HS molida. Durante la fase II (49 a 63 días de edad), cuando todos los lechones recibieron un pienso común, no se observaron diferencias en productividad de los lechones debido al tratamiento previo. En general, la digestibilidad de los nutrientes a los 35 días de edad fue mayor para los lechones que consumieron CPS que para los lechones que consumieron R-HS con los lechones que consumieron AP-HS en una posición intermedia. La digestibilidad de la PB fue mayor (P≤0.01) para el pienso que contenía CPS que para el promedio de los 5 tratamientos en base a HS. También, la digestibilidad de la MO y de la materia seca (MS) fue mayor para el pienso que contenía AP-HS micronizada o molida groseramente que para el pienso que contenía R-HS. La micronización de la AP-HS no tuvo efecto alguno sobre la digestibilidad de los nutrientes. Se concluye que cuando el CPS sustituye en el pienso a R-HS, la digestibilidad de la PB aumenta pero no tiene efecto alguno sobre los parámetros productivos. La utilización de AP-HS en sustitución de R-HS en el pienso mejora la digestibilidad de los nutrientes pero no afecta a los parámetros productivos. La utilización de harina de soja micronizada en los piensos mejora la eficiencia alimenticia durante la primera semana post-destete pero no tiene efecto alguno sobre la digestibilidad de los nutrientes. En general, la inclusión de productos derivados del haba de soja con un alto valor añadido (CPS o AP-HS) en el pienso presenta pocas ventajas en términos productivos al uso de AP-HS en lechones blancos recién destetados. En el experimento 3, se estudiaron los mismos productos de soja y piensos similares al experimento 2 en lechones ibéricos recién destetados. Además de los parámetros productivos y la TTAD de los nutrientes, en este ensayo se estudió también la digestibilidad ileal aparente (AID) de los nutrientes, así como las características histológicas y morfometría de la mucosa ileal. Cada uno de los 6 tratamientos fue replicado 6 veces (6 lechones/departamento). De 30 a 51 días de edad la fuente de harina de soja no afectó a los parámetros productivos, pero el índice de diarreas fue mayor (P<0.001) y la TTAD y AID de los nutrientes menor en los lechones alimentados con R-HS que en los alimentados con CPS o AP-HS. Sin embargo, no se encontró ninguna diferencia para éstos parámetros entre los piensos que contenían AP-HS y CPS. La TTAD de la MO (P=0.07) y de la EB (P=0.05) tendieron a ser mayores en los piensos basados en AP-HS micronizada que en los basados en AP-HS molida. La TTAD de la EB tendió (P<0.05) a ser mayor para la AP-HS de origen USA que para la AP-HS de origen ARG. Los lechones que consumieron R-HS presentaron villi de menor longitud (P<0.01) que los lechones que consumieron AP-HS o CPS, pero no se observaron diferencias en el caso de los lechones que recibieron los piensos que contenían AP-HS o CPS. Se concluye que la inclusión de AP-HS o CPS en el pienso en sustitución de R-HS reduce el índice de diarreas y mejora la digestibilidad de los nutrientes y las características morfológicas del íleon sin afectar a los parámetros productivos. La utilización de piensos basados en productos derivados del haba de soja con mayor valor añadido (CPS o AP-HS) en sustitución de la R-HS, mejora la TTAD de todos los nutrientes y reduce el índice de diarreas si llegar afectar a los parámetros productivos. En el experimento 4 se estudiaron los efectos del contenido de PB y la complejidad del pienso, la presentación física y la duración del suministro del pienso prestárter sobre los parámetros productivos y la TTAD de los nutrientes en lechones ibéricos recién destetados de 28 a 63 días de edad. Hubo 12 tratamientos experimentales con 2 tipos de pienso (AC; calidad alta y BC: calidad media), 2 presentaciones del pienso (gránulo y harina) y 3 duraciones de suministro del pienso prestárter (7, 14 y 21 días). Desde los 7, 14 y 21 días de experimento (dependiendo del tratamiento), hasta los 35 días, todos los lechones recibieron un pienso comercial en forma de harina. Cada uno de los tratamientos fue replicado 3 veces (6 lechones/departamento). En el global del experimento, la ganancia media diaria (GMD; P<0.05) y el consumo medio diario (CMD; P<0.01) fue menor en los lechones que recibieron el pienso AC que para los que recibieron el pienso de BC, si bien el IC no se vio afectado. La granulación del pienso prestárter no afectó a los crecimientos pero mejoró la eficiencia alimenticia. La utilización del pienso prestárter de 0 a 21 días de prueba mejoró el IC (P<0.05), pero redujo la GMD (P<0.01) en comparación con la utilización de éste pienso solo durante 7 o 14 días. El índice de diarreas tendió a ser mayor (P=0.06) en los lechones alimentados con los piensos AC que en los alimentados con los piensos BC. Asimismo, el índice de diarreas fue superior en los lechones que recibieron el pienso en gránulo que los que los recibieron en harina (P<0.001). Además, el índice de diarreas fue superior en los lechones que recibieron el pienso prestárter durante 14 o 21 días que en los que lo recibieron solo durante 7 días (P<0.01). De 28 a 49 días de edad, la GMD y el IC no se vieron afectados por la complejidad del pienso, pero la presentación en gránulo o el aumento en la duración de suministro del pienso prestárter mejoró el IC (P<0.01). También, en este periodo el índice de diarreas fue mayor en lechones alimentados con piensos granulados que aquellos alimentados con piensos en harina. Asimismo, fue superior para los lechones alimentados con el pienso prestárter durante 14 o 21 días que para los que recibieron éste pienso solo durante 7 días (P<0.01). De 49 a 63 días de edad, los lechones que previamente habían recibido piensos BC crecieron más que los que recibieron piensos AC (P<0.001). Asimismo, los lechones que recibieron el pienso prestárter durante 21 días comieron (P< 0.001) y crecieron menos (P<0.05) presentando una peor eficacia alimenticia (P<0.05) que los lechones que lo recibieron solo durante 7 14 días. La digestibilidad de la MO fue mayor en los lechones alimentados con los piensos AC que en los alimentados con piensos BC (P<0.05). La granulación del pienso mejoró la digestibilidad de los principales nutrientes. Los piensos prestárter AC mejoraron la digestibilidad de los nutrientes pero no la eficiencia alimenticia en lechones ibéricos de 28 a 63 días de edad. La granulación del pienso mejoró la eficiencia alimenticia. El aumento del suministro del pienso prestárter de 7 a 21 días mejoró la eficiencia alimenticia pero redujo la GMD. Por lo tanto, la utilización de piensos granulados de alta calidad durante el periodo prestárter es recomendable en lechones ibéricos, pero solo durante la primera semana post-destete. ABSTRACT The main objectives of this PhD Thesis were to study the effects of a) heat processing (HP) of corn and inclusion of high quality ingredients of animal origin such as fish meal (FM) and dried milk products in the diet, b) inclusion of different soy products varying in crude protein (CP) content, particle size, and origin of the beans in diets for conventional white and Iberian weanling pigs, and c) effects of ingredient quality, feed form, and duration of supply of the phase I diets on growth performance, nutrient digestibility, and intestinal morphology of weanling pigs. In experiment 1, the effect of diet complexity on total tract apparent digestibility (TTAD) and growth performance was studied in piglets from 21 to 62 d of age. There were 10 experimental treatments which resulted from the combination of 5 phase I (21 to 41 d of age) and 2 phase II (42 to 62 d of age) diets. The 5 phase I diets consisted of a negative control diet that contained 40 % raw corn, 4% FM, and 7% lactose (LAC); a positive control diet that contained 40 % HP corn, 10% FM, and 14% LAC, and 3 extra diets that used similar ingredients to those of the positive control diet but in which a) 40% of HP corn was substituted by raw corn, b) 4% FM rather than 10% FM, and c) 7% LAC instead of 14% LAC were included in the diet. Each treatment was replicated 6 times (6 pigs per pen). From 42 to 62 d of age, half of the pens of each of the 5 phase I treatments received a standard soybean meal (SBM)–native corn–lard diet wheras the other half received a diet with similar nutrient profile but that included 20% HP corn, 5% FM, 1.3% lactosa, 2% fermented soy protein concentrate, and 1% soybean oil in substitution of variables amounts of non-processed corn, SBM, and lard. Dietary treatment did not affect piglet performance at any age, but the incidence of post-weaning diarrhea (PWD) was higher during phase I in piglets fed the negative control diet than in piglets fed any of the other diets (P<0.05). At 30 d of age (phase I diets), the TTAD of organic matter (OM) and gross energy (GE) was lower (P<0.001) in pigs fed the negative control diet than in pigs fed the other diets but CP digestibility was not affected. At 50 d of age (phase II diets), dietary treatment did not affect TTAD of any dietary component. It is concluded that the use of high quality ingredients at high levels in the diet did not improve growth performance of piglets at any age. From 21 to 41 d of age, PWD was reduced and nutrient digestibility was increased in pigs fed the more complex diets. Consequently, the inclusion of high levels of high quality ingredients in piglet diets to maximize growth performance might not be justified under all circumstances In experiment 2, the effect of CP content (44 vs. 49 % CP) of SBM, micronization (fine grinding) of the high CP SBM (HP-SBM; 49% CP), and soy protein concentrate (SPC; 65% CP) on TTAD and growth performance was studied in conventional white piglets from 28 to 63 d of age. From 28 to 49 d of age (phase I), there was a positive control diet that included 6.5% CP from SPC and a negative control diet that supplied the same amount of CP as regular SBM (R-SBM; 44% CP) of Argentina (ARG) origin. The other 4 diets included the same amount of dietary CP from 2 sources of HP-SBM (USA or ARG origin), either ground (990 μm) or micronized (60 μm). Each treatment was replicated 8 times (6 pigs per pen). From 49 to 63 d of age (phase II), all pigs were fed a common commercial starter diet. For the entire phase I, type of soy product included in the diet did not affect growth performance of the pigs. However, from 28 to 35 d of age pigs fed the micronized HP-SBM had better feed conversion ratio (FCR; 0.90 vs. 1.01; P<0.05) than pigs fed the ground HP-SBM. Also, from 35 to 42 d of age, average daily feed intake (ADFI) tended to be higher (P=0.08) for pigs fed the micronized HP-SBM than for pigs fed the ground HP-SBM. During phase II, when all the pigs received the same diet, no differences among treatments were observed. In general, the TTAD of nutrients at 35 d of age was higher for the SPC than for the R-SBM diet with the HP-SBM diets being intermediate. The TTAD of CP was higher (83.8% vs. 81.9%; P≤0.01) for the SPC diet than for the average of 5 SBM containing diets. Also, the digestibility of OM and dry matter (DM) was higher (P<0.01) for the HP-SBM, either ground or micronized, than for the R-SBM diet. Micronization of the HP-SBM did not affect nutrient digestibility. It is concluded that when R-SBM was substituted by SPC, CP digestibility was improved but no effects on growth performance were observed. The use of HP-SBM in substitution of R-SBM in the diet improved nutrient digestibility but did not affect piglet performance. The inclusion of micronized HP-SBM in the diet improved FCR during the first week post-weaning but did not affect TTAD of nutrients. Therefore, the inclusion of added value soy products (SPC or micronized SBM) in the diet presents little advantage in terms of growth performance over the use of HP-SBM in pigs weaned at 28 d of age. In experiment 3, the effects of the same sources of soy protein used in experiment 2 on TTAD and growth performance of crossbreed Iberian pigs from 30 to 61 d of age were studied. In addition, the apparent ileal digestibility (AID) of nutrients and mucosa ileum morphology were also determined. Dietary treatment did not affect growth performance of the pigs at any age but from 30 to 51 d of age (phase I diets), PWD was higher (P<0.001) and the TTAD and AID of all nutrients were lower for pigs fed the R-SBM diet than for pigs fed the HP-SBM or the SPC diets. However, no differences between the HP-SBM and the SPC containing diets were detected for digestibility of any dietary component. The TTAD of OM (P=0.07) and GE (P=0.05) tended to be higher for the micronized HP-SBM than for the ground HP-SBM and that of GE was higher (P<0.05) for the USA meal than for the ARG meal. Pigs fed R-SBM had lower villus height (P<0.01) than pigs fed HP-SBM or SPC but no differences in ileal mucosal morphology were detected between SPC and HP-SBM containing diets. It is concluded that feeding the HP-SBM or SPC in substitution of R-SBM reduced PWD and improved nutrient digestibility and ileal morphology in piglets as compared with feeding the R-SBM, but had no effect on growth performance. The inclusion in the diet of added value soy products (micronized SBM or SPC) in substitution of the R-SBM increased the TTAD of all nutrients and reduced PWD but had no advantage in terms of growth performance over the use of ground HP-SBM. In experiment 4, the effect of CP content and ingredient complexity, feed form, and duration of feeding of the phase I diets on growth performance and TTAD of nutrients were studied in Iberian pigs from 28 to 63 d of age. There were 12 dietary treatments with 2 type of feeds (HQ; higher quality and LQ; medium quality), 2 feed forms (pellets vs. mash), and 3 durations of supply (7, 14, and 21 d) of the phase I diets. From d 7, 14, or 21 (depending on treatment) to d 35 of experiment, all pigs received a common diet in mash form. Each treatment was replicated 3 times (6 pigs/pen). For the entire experiment, average daily gain (ADG; P<0.05) and ADFI (P<0.01) were lower with the HQ than with the LQ phase I diets but FCR was not affected. Pelleting of the phase I diets did not affect ADG but improved FCR (P<0.01). Feeding the phase I diets from d 0 to 21 improved FCR (P<0.05) but decreased ADG (P<0.01) as compared with 7 or 14 d of feeding. Post-weaning diarrhea tended to be higher (P=0.06) for pigs fed the HQ diets than for pigs fed the LQ diets and for pigs fed pellets than for pigs fed mash (P<0.001). Also, PWD was higher for pigs fed the phase I diet for 14 or 21 d than for pigs fed this diet for 7 d (P<0.01). From d 0 to 21, ADG and FCR were not affected by feed quality but feeding pellets or increasing the duration of feeding the phase I diets improved FCR (P<0.01). Also, in this period PWD was higher with pellets than with mash and for pigs fed the phase I diets for 14 or 21 d than for pigs fed this diet for only 7 d (P<0.01). From d 21 to 35, pigs previously fed the LQ diet had higher ADG than pigs fed the HQ phase I diets (P<0.001). Also, pigs that were fed the phase I diets for 21 d had lower ADG (P<0.05) and ADFI (P< 0.001) and poor FCR (P<0.05) than pigs fed these diets for 7 or 14 d. Organic matter digestibility was higher for pigs fed the HQ phase I diets than for pigs fed the LQ phase I diets (P<0.05). Pelleting improved TTAD of all nutrients (P<0.01). It is concluded that HQ phase I diets increased TTAD of nutrients but not feed efficiency of Iberian pigs from d 28 to 63 d of age. Also, pelleting improved nutrient digestibility and feed efficiency. Increasing the duration of supply of the phase I diets from 7 to 21 d improved feed efficiency but reduced ADG. Therefore, the use of LQ phase I diets in pellet form for no more than 7 d after weaning is recommended in Iberian pigs.

Technical report[s]

Contract no DA-44-009 Eng. 2435, Department of the Army Project no. 8-35-11-101.

Flow regime, hydrodynamics, floc size distribution and sludge properties in activated sludge bubble column, air-lift and aerated stirred reactors

This paper presents a comparative study how reactor configuration, sludge loading and air flowrate affect flow regimes, hydrodynamics, floc size distribution and sludge solids-liquid separation properties. Three reactor configurations were studied in bench scale activated sludge bubble column reactor (BCR), air-lift reactor (ALR) and aerated stirred reactor (ASR). The ASR demonstrated the highest capacity of gas holdup and resistance, and homogeneity in flow regimes and shearing forces, resulting in producing large numbers of small and compact floes. The fluid dynamics in the ALR created regularly directed recirculation forces to enhance the gas holdup and sludge flocculation. The BCR distributed a high turbulent flow regime and non-homogeneity in gas holdup and mixing, and generated large numbers of larger and looser floes. The sludge size distributions, compressibility and settleability were significantly influenced by the reactor configurations associated with the flow regimes and hydrodynamics.

A comparison between capillary and imaging techniques for sizing bubbles in flotation systems

This communication reports a laboratory and plant comparison between the University of Cape Town (UCT) device (capillary) and the McGill University bubble sizing method (imaging). The laboratory work was conducted on single bubbles to establish the accuracy of the techniques by comparing with a reference method (capture in a burette). Single bubble measurements with the McGill University technique showed a tendency to slightly underestimate (4% for a 1.3 mm bubble) and the UCT technique to slightly overestimate (1% for the 1.3 man bubble). Both trends are anticipated from fundamental considerations. In the UCT technique bubble breakup was observed when measuring a 2.7 mm bubble using a 0.5 mm ID capillary tube. A discrepancy of 11% was determined when comparing the techniques in an industrial-scale mechanical flotation cell. The possible sources of bias are discussed. (C) 2003 Elsevier Ltd. All rights reserved.

Structural change in macroeconomic time series: A complex systems perspective

We demonstrate that the process of generating smooth transitions Call be viewed as a natural result of the filtering operations implied in the generation of discrete-time series observations from the sampling of data from an underlying continuous time process that has undergone a process of structural change. In order to focus discussion, we utilize the problem of estimating the location of abrupt shifts in some simple time series models. This approach will permit its to address salient issues relating to distortions induced by the inherent aggregation associated with discrete-time sampling of continuous time processes experiencing structural change, We also address the issue of how time irreversible structures may be generated within the smooth transition processes. (c) 2005 Elsevier Inc. All rights reserved.

Two-stage thermophilic-mesophilic anaerobic digestion of waste activated sludge-from a biological nutrient removal plant

A two-stage thermophilic-mesophilic anaerobic digestion pilot-plant was operated solely on waste activated sludge (WAS) from a biological nutrient removal (BNR) plant. The first-stage thermophilic reactor (HRT 2 days) was operated at 47, 54 and 60 degrees C. The second-stage mesophilic digester (HRT 15 days) was held at a constant temperature of 36-37 degrees C. For comparison with a single-stage mesophilic process, the mesophilic digester was also operated separately with an HRT of 17 days and temperature of 36-37 degrees C. The results showed a truly thermophilic stage (60 degrees C) was essential to achieve good WAS degradation. The lower thermophilic temperatures examined did not offer advantages over single-stage mesophilic treatment in terms of COD and VS removal. At a thermophilic temperature of 60 degrees C, the plant achieved 35% VS reduction, representing a 46% increase compared to the single-stage mesophilic digester. This is a significant level of degradation which could make such a process viable in situations where there is no primary sludge generated. The fate of the biologically stored phosphorus in this BNR sludge was also investigated. Over 80% of the incoming phosphorus remained bound up with the solids and was not released into solution during the WAS digestion. Therefore only a small fraction of phosphorus would be recycled to the main treatment plant with the dewatering stream.

Cs promoted triglyceride transesterification over MgO nanocatalysts

The influence of Cs on the structure and basicity of nanocrystalline MgO was assessed via electron microscopy, CO2 chemisorption, XRD and XPS. Caesium incorporation via co-precipitation under supercritical conditions generates Cs2Mg(CO3)2 nanocrystallites with an enhanced density and strength of surface base sites. Wet impregnation proved less effective for modifying MgO nanocrystals. A strong synergy between Cs and Mg components in the co-precipitated material dramatically enhanced the rate of tributyrin transesterification with methanol relative to undoped MgO and homogeneous Cs2CO3 catalysts. On-stream deactivation of Cs-doped MgO reflects heavy surface carbon deposition and loss of the high activity Cs2Mg(CO3)2 phase due to limited Cs dissolution.

Evaluation of anti-inflammatory activity of derivatives from aerial parts of Baccharis uncinella

Context: Species of Baccharis exhibit antibiotic, antiseptic, and wound-healing properties, and have been used in the traditional medicine of South America for the treatment of inflammation, headaches, diabetes, and hepatobiliary disorders.Objective: To investigate the anti-inflammatory activity of organic phases from EtOH extract of the aerial parts of Baccharis uncinella DC (Asteraceae).Materials and methods: The crude EtOH extract from the aerial parts of B. uncinella was subjected to partition procedures and the corresponding CH(2)Cl(2) and EtOAc phases were subjected to several chromatographic separation procedures. Thus, these phases and their purified compounds were assayed for evaluation of anti-inflammatory activity.Results: The CH(2)Cl(2) phase from EtOH extract from B. uncinella contained two triterpenoids (oleanolic and ursolic acids) and one flavonoid (pectolinaringenin), whereas the respective EtOAc phase showed to be composed mainly by two phenylpropanoid derivatives (caffeic and ferulic acids). The CH(2)Cl(2) and EtOAc phases as well as their isolated compounds exhibited anti-inflammatory effects against inflammatory reactions induced by phospholipase A2 (from Crotalus durissus terrificus venom) and by carrageenan.Discussion and conclusion: The results suggested that the components obtained from partition phases of EtOH extract of B. uncinella could represent lead molecules for the development of anti-inflammatory agents. Additionally, the results confirmed the use of Baccharis genus in the traditional medicine of South America for the treatment of inflammation and other heath disorders. To date, the present work describes for the first time the anti-inflammatory effects of compounds isolated from B. uncinella.

Numerical modelling and structural optimization of multifunctional maritime structures aimed to protect harbours and produce energy

The main objective of this PhD thesis is to optimize a specific multifunctional maritime structure for harbour protection and energy production, named Overtopping Breakwater for Energy Conversion (OBREC), developed by the team of the University of Campania. This device is provided with a sloping plate followed by a unique reservoir, which is linked with the machine room (where the energy conversion occurs) by means of a pipe passing through the crown wall, provided with a parapet on top of it. Therefore, the potential energy of the overtopping waves, collected inside the reservoir located above the still water level, is then converted by means of low – head turbines. In order to improve the understanding of the wave – structure interactions with OBREC, several methodologies have been used and combined together: i. analysis of recent experimental campaigns on wave overtopping discharges and pressures at the crown wall on small – scale OBREC cross sections, carried out in other laboratories by the team of the University of Campania; ii. new experiments on cross sections similar to the OBREC device, planned and carried out in the hydraulic lab at the University of Bologna in the framework of this PhD work; iii. numerical modelling with a 1 – phase incompressible fluid model IH – 2VOF, developed by the University of Cantabria, and with a 2 – phase incompressible fluid model OpenFOAM, both available from the literature; iv. numerical modelling with a new 2 – phase compressible fluid model developed in the OpenFOAM environment within this PhD work; v. analysis of the data gained from the monitoring of the OBREC prototype installation.

Solid-phase microextraction for determination of 3-chloro-4-(dichloromethyl)-5-hydroxy-2[5H]-furanone in water

Solid-phase microextraction, using on-line bis(trimethylsilyl)trifluoroacetamide derivatisation, gas chromatography, and mass spectrometry, was evaluated in the quantification of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) in water samples. Fibres encompassing a wide range of polarities were used with headspace and direct immersion sampling. For the immersion procedure, various parameters affecting MX extraction, including pH, salinity, temperature, and extraction time were evaluated. The optimised method (polyacrylate fibre; 20% Na2SO4; pH 2.0; 60 min; 20 °C) was applied for reservoir chlorinated water samples-either natural or spiked with MX (50 ng L-1 and 100 ng L-1). The recovery of MX ranged from 44 to 72%. Quantification of MX in water samples was done using external standard and the selected ion monitoring mode. Correlation coefficient (0.98%), relative standard deviation (5%), limit of detection (30 ng L-1) and limit of quantification (50 ng L-1) were obtained from calibration curve.

Microstructural Evidence of beta Co(2)Si- phase Stability in the Co-Si System

The aim of this work was to verify the stability of the beta Co(2)Si phase in the Co-Si system. The samples were produced via arc-melting and characterized through Scanning Electron Microscopy (SEM) and Differential Thermal Analysis (DTA). The results have confirmed the stability of the beta Co(2)Si phase, however, a modification of the shape of beta CoSi phase field is proposed in order to fully explain the results.

Spin dynamics of NiCl(2)-4SC(NH(2))(2) in the field-induced ordered phase

NiCl(2)-4SC(NH(2))(2) (known as DTN) is a spin-1 material with a strong single-ion anisotropy that is regarded as a new candidate for Bose-Einstein condensation (BEC) of spin degrees of freedom. We present a systematic study of the low-energy excitation spectrum of DTN in the field-induced magnetically ordered phase by means of high-field electron spin resonance measurements at temperatures down to 0.45 K. We argue that two gapped modes observed in the experiment can be consistently interpreted within a four-sublattice antiferromagnet model with a finite interaction between two tetragonal subsystems and unbroken axial symmetry. The latter is crucial for the interpretation of the field-induced ordering in DTN in terms of BEC.

Isotropic and anisotropic spin-spin interactions and a quantum phase transition in a dinuclear Cu(II) compound

We report electron-paramagnetic resonance (EPR) studies at similar to 9.5 GHz (X band) and similar to 34 GHz (Q band) of powder and single-crystal samples of the compound Cu(2)[TzTs](4) [N-thiazol-2-yl-toluenesulfonamidatecopper(II)], C(40)H(36)Cu(2)N(8)O(8)S(8), having copper(II) ions in dinuclear units. Our data allow determining an antiferromagnetic interaction J(0)=(-113 +/- 1) cm(-1) (H(ex)=-J(0)S(1)center dot S(2)) between Cu(II) ions in the dinuclear unit and the anisotropic contributions to the spin-spin coupling matrix D (H(ani)=S(1)center dot D center dot S(2)), a traceless symmetric matrix with principal values D/4=(0.198 +/- 0.003) cm(-1) and E/4=(0.001 +/- 0.003) cm(-1) arising from magnetic dipole-dipole and anisotropic exchange couplings within the units. In addition, the single-crystal EPR measurements allow detecting and estimating very weak exchange couplings between neighbor dinuclear units, with an estimated magnitude parallel to J(')parallel to=(0.060 +/- 0.015) cm(-1). The interactions between a dinuclear unit and the ""environment"" of similar units in the structure of the compound produce a spin dynamics that averages out the intradinuclear dipolar interactions. This coupling with the environment leads to decoherence, a quantum phase transition that collapses the dipolar interaction when the isotropic exchange coupling with neighbor dinuclear units equals the magnitude of the intradinuclear dipolar coupling. Our EPR experiments provide a new procedure to follow the classical exchange-narrowing process as a shift and collapse of the line structure (not only as a change of the resonance width), which is described with general (but otherwise simple) theories of magnetic resonance. Using complementary procedures, our EPR measurements in powder and single-crystal samples allow measuring simultaneously three types of interactions differing by more than three orders of magnitude (between 113 cm(-1) and 0.060 cm(-1)).

Design of 1D and 2D molecule-based magnets with the ligand 4,5-dimethyl-1,2-phenylenebis(oxamato)

Three new bimetallic oxamato-based magnets with the proligand 4,5-dimethyl-1,2-phenylenebis-(oxamato) (dmopba) were synthesized using water or dimethylsulfoxide (DMSO) as solvents. Single crystal X-ray diffraction provided structures for two of them: [MnCu(dmopba)(H(2)O)(3)]n center dot 4nH(2)O (1) and [MnCu(dmopba)(DMSO)(3)](n center dot)nDMSO (2). The crystalline structures for both 1 and 2 consist of linearly ordered oxamato-bridged Mn(II)Cu(II) bimetallic chains. The magnetic characterization revealed a typical behaviour of ferrimagnetic chains for 1 and 2. Least-squares fits of the experimental magnetic data performed in the 300-20 K temperature range led to J(MnCu) = -27.9 cm(-1), g(Cu) = 2.09 and g(Mn) = 1.98 for 1 and J(MnCu) = -30.5 cm(-1), g(Cu) = 2.09 and g(Mn) = 2.02 for 2 (H = -J(MnCu)Sigma S(Mn, i)(S(Cu, i) + S(Cu, i-1))). The two-dimensional ferrimagnetic system [Me(4)N](2n){Co(2)[Cu(dmopba)](3)}center dot 4nDMSO center dot nH(2)O (3) was prepared by reaction of Co(II) ions and an excess of [Cu(dmopba)](2-) in DMSO. The study of the temperature dependence of the magnetic susceptibility as well as the temperature and field dependences of the magnetization revealed a cluster glass-like behaviour for 3.

Atomistic origins of the phase transition mechanism in Ge(2)Sb(2)Te(5)

The fast and reversible phase transition mechanism between crystalline and amorphous phases of Ge(2)Sb(2)Te(5) has been in debate for several years. Through employing first-principles density functional theory calculations, we identify a direct structural link between the metastable crystalline and amorphous phases. The phase transition is driven by the displacement of Ge atoms along the rocksalt [111] direction from stable octahedron to high energy unstable tetrahedron sites close to the intrinsic vacancy regions, which generates a high energy intermediate phase between metastable and amorphous phases. Due to the instability of Ge at the tetrahedron sites, the Ge atoms naturally shift away from those sites, giving rise to the formation of local-ordered fourfold motifs and the long-range structural disorder. Intrinsic vacancies, which originate from Sb(2)Te(3), lower the energy barrier for Ge displacements, and hence, their distribution plays an important role in the phase transition. The high energy intermediate configuration can be obtained experimentally by applying an intense laser beam, which overcomes the thermodynamic barrier from the octahedron to tetrahedron sites. The high figure of merit of Ge(2)Sb(2)Te(5) is achieved from the optimal combination of intrinsic vacancies provided by Sb(2)Te(3) and the instability of the tetrahedron sites provided by GeTe.