Is there space to build one more transshipment terminal within Portuguese territory?

NSBE - UNL

Structural transformation in the product space: Patterns and implications

Product fundamentals are essential in explaining heterogeneity in the product space. The scope for adapting and transferring capabilities into the production of different goods determines the speed and intensity of the structural transformation process and entails dissimilar development opportunities for nations. Future specialization patterns become then partly determined by the current network of products’ relatedness. Building on previous literature, this paper explicitly compares methodological concepts of product connectivity to conclude in favor of the density measure we propose combined with the Revealed Relatedness Index (RRI) approach presented by Freitas and Salvado (2011). Overall, RRI specifications displayed more consistent behavior when different time horizons are equated.

Using an LED as a sensor and visible light communication device in a smart illumination system

The need for more efficient illumination systems has led to the proliferation of Solid-State Lighting (SSL) systems, which offer optimized power consumption. SSL systems are comprised of LED devices which are intrinsically fast devices and permit very fast light modulation. This, along with the congestion of the radio frequency spectrum has paved the path for the emergence of Visible Light Communication (VLC) systems. VLC uses free space to convey information by using light modulation. Notwithstanding, as VLC systems proliferate and cost competitiveness ensues, there are two important aspects to be considered. State-of-the-art VLC implementations use power demanding PAs, and thus it is important to investigate if regular, existent Switched-Mode Power Supply (SMPS) circuits can be adapted for VLC use. A 28 W buck regulator was implemented using a off-the-shelf LED Driver integrated circuit, using both series and parallel dimming techniques. Results show that optical clock frequencies up to 500 kHz are achievable without any major modification besides adequate component sizing. The use of an LED as a sensor was investigated, in a short-range, low-data-rate perspective. Results show successful communication in an LED-to-LED configuration, with enhanced range when using LED strings as sensors. Besides, LEDs present spectral selective sensitivity, which makes them good contenders for a multi-colour LED-to-LED system, such as in the use of RGB displays and lamps. Ultimately, the present work shows evidence that LEDs can be used as a dual-purpose device, enabling not only illumination, but also bi-directional data communication.

Integrated communications strategy for mylabel

Integrated Communication Strategy for MyLabel Following paper presents Integrated Communication Strategy for Continente’s private label brand of cosmetics MyLabel. The main purpose of the project is to position MyLabel as venture brand which will gain strong market position in order to compete with the manufacturer brands. Therefore, based on the created brand equity model for the venture cosmetic brand, MyLabel will be approached from the branding perspective in order to improve perceived quality and consecutively, build brand recognition and credibility. In this respect, integrated communication strategy includes some of the branding tactics and marketing communication mix. Thereafter, MyLabel will be transformed into the sub-brand MyBeauty, which can exploit opportunities given by the new market image of retailers’ brands and gain special, unique position in the market.

Pulmonary tuberculosis in São Luis, State of Maranhão, Brazil: space and space-time risk clusters for death (2008-2012)

INTRODUCTION: The objective was to identify space and space-time risk clusters for the occurrence of deaths in a priority city for the control of tuberculosis (TB) in the Brazilian Northeast. METHODS: Ecological research was undertaken in the City of São Luis/Maranhão. Cases were considered that resulted in deaths in the population living in the urban region of the city with pulmonary TB as the basic cause, between 2008 and 2012. To detect space and space-time clusters of deaths due to pulmonary TB in the census sectors, the spatial analysis scan technique was used. RESULTS: In total, 221 deaths by TB occurred, 193 of which were due to pulmonary TB. Approximately 95% of the cases (n=183) were geocoded. Two significant spatial clusters were identified, the first of which showed a mortality rate of 5.8 deaths per 100,000 inhabitants per year and a high relative risk of 3.87. The second spatial cluster showed a mortality rate of 0.4 deaths per 100,000 inhabitants per year and a low relative risk of 0.10. A significant cluster was observed in the space-time analysis between 11/01/2008 and 04/30/2011, with a mortality rate of 8.10 deaths per 100,000 inhabitants per year and a high relative risk (3.0). CONCLUSIONS: The knowledge of priority sites for the occurrence of deaths can support public management to reduce inequities in the access to health services and permit an optimization of the resources and teams in the control of pulmonary TB, providing support for specific strategies focused on the most vulnerable populations.

Fractional state space analysis of economic systems

This paper examines modern economic growth according to the multidimensional scaling (MDS) method and state space portrait (SSP) analysis. Electing GDP per capita as the main indicator for economic growth and prosperity, the long-run perspective from 1870 to 2010 identifies the main similarities among 34 world partners’ modern economic growth and exemplifies the historical waving mechanics of the largest world economy, the USA. MDS reveals two main clusters among the European countries and their old offshore territories, and SSP identifies the Great Depression as a mild challenge to the American global performance, when compared to the Second World War and the 2008 crisis.

Ion-beam sources based on superionic solid electrolytes

An ion emitter consisting of a sharp silver tip covered in RbAg4I5 solid electrolyte film has been developed and studied. An accelerating potential is applied and Ag+ ions are emitted from the tip’s apex by field evaporation. The emitted ions are collected by a Faraday cup, producing a current on the pico/nanoampere level which is read by an electrometer. The tips were produced mechanically by sandpaper polishing. The sharpest tip produced had a 2:4 m apex radius. Two deposition methods were studied: thermal vacuum and pulsed laser deposition. The best tip produced a peak current value of 96nA at 180oC, and a quasi-stable 4nA emission current at 160oC, both using an extraction potential of 10kV . The emission dependence on time, temperature and accelerating potential has been studied. Deposited films were characterized by X-ray diffraction (XRD), profilometry, optical and Scanning Electron Microscope (SEM) and Secondary Ion Mass Spectroscopy (SIMS) measurements. Several ion emitters were developed, the latter ones were all able to maintain stable high ion emissions for long periods of time. This investigation was a continuation of an ongoing project backed by the European Space Agency, with the objective of making a proof of concept of this kind of ion emitter with potential application on ion thrusters for orbiting satellites. Going forward, it would be interesting to make a finer analysis of the electrolyte’s conductivity at high temperatures, explore Wien Effect-based emission and to further develop a multi-tip ion emitter prototype.

Two decades of tuberculosis in a city in Northeastern Brazil: advances and challenges in time and space

Abstract: INTRODUCTION This study presents two decades of epidemiological data on tuberculosis (TB), in order to understanding the disease profile and its spatiotemporal dynamics. METHODS This descriptive study was performed in the City of Olinda/Pernambuco, Brazil, from 1991-2010, and it analyzed new patients with TB living in the city. We used the χ²-test with a p-value <0.05 to identify differences in trends. Incidence and cluster distribution were identified using spatial scan statistics. RESULTS In total, 6202 new cases were recorded during the two decades. The highest incidence occurred in 1995 (110 cases/100,000 inhabitants), and the lowest occurred in 2009 (65 cases/100,000 inhabitants) (β=-1.44; R²=0.43; p=0.0018). The highest mortality occurred in 1998 (16 deaths/100,000 inhabitants), and the lowest occurred in 2008 (5 deaths/100,000 inhabitants) (β=-0.19; R²=0.17; p=0.07). There was a male predominance (65%), and ages ranged from 20-49 years (65%). There was a substantial increase in the number of patients that were cured after treatment (60% to 67%; p<0.001) as well as those tested for HIV (1.9% to 58.5%; p<0.001). During the first decade, clusters with p-values <0.05 included 29% of the total notified cases, and in the second decade, that percentage was 12%. CONCLUSIONS We observed a decreasing trend in incidence, which was significant, and mortality rates, which was not significant. The increased number of laboratory tests performed reflects advances in surveillance, and a reduction in the proportion of cases in primary clusters suggests, among other things, that the disease is spreading across the region.

Vascular lesions of the lumbar epidural space: magnetic resonance imaging features of epidural cavernous hemangioma and epidural hematoma

The authors report the magnetic resonance imaging diagnostic features in two cases with respectively lumbar epidural hematoma and cavernous hemangioma of the lumbar epidural space. Enhanced MRI T1-weighted scans show a hyperintense signal rim surrounding the vascular lesion. Non-enhanced T2-weighted scans showed hyperintense signal.

Reconfigurable photonic logic architecture

The amorphous silicon photo-sensor studied in this thesis, is a double pin structure (p(a-SiC:H)-i’(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts deposited over transparent glass thus with the possibility of illumination on both sides, responding to wave-lengths from the ultra-violet, visible to the near infrared range. The frontal il-lumination surface, glass side, is used for light signal inputs. Both surfaces are used for optical bias, which changes the dynamic characteristics of the photo-sensor resulting in different outputs for the same input. Experimental studies were made with the photo-sensor to evaluate its applicability in multiplexing and demultiplexing several data communication channels. The digital light sig-nal was defined to implement simple logical operations like the NOT, AND, OR, and complex like the XOR, MAJ, full-adder and memory effect. A pro-grammable pattern emission system was built and also those for the validation and recovery of the obtained signals. This photo-sensor has applications in op-tical communications with several wavelengths, as a wavelength detector and to execute directly logical operations over digital light input signals.

Electro-Optical/Infrared sensor turret integration on an aircraft - structural im-pact on LOCKHEED MARTIN C-130H and design methodology

The growing need to patrol and survey large maritime and terrestrial areas increased the need to integrate external sensors on aircraft in order to accomplish those patrols at increasingly higher altitudes, longer range and not depending upon vehicle type. The main focus of this work is to elaborate a practical, simple, effective and efficient methodology for the aircraft modification procedure resulting from the integration of an Elec-tro-Optical/Infra-Red (EO/IR) turret through a support structure. The importance of the devel-opment of a good methodology relies on the correct management of project variables as time, available resources and project complexity. The key is to deliver a proper tool for a project de-sign team that will be used to create a solution that fulfils all technical, non-technical and certi-fication requirements present in this field of transportation. The created methodology is inde-pendent of two main inputs: sensor model and aircraft model definition, and therefore it is in-tended to deliver the results for different projects besides the one that was presented in this work as a case study. This particular case study presents the development of a structure support for FLIR STAR SAPHIRE III turret integration on the front lower fuselage bulkhead (radome) of the LOCKHEED MARTIN C-130 H. Development of the case study focuses on the study of local structural analysis through the use of Finite Element Method (FEM). Development of this Dissertation resulted in a cooperation between Faculty of Science and Technology - Universidade Nova de Lisboa and the company OGMA - Indústria Aeronáutica de Portugal

Causes of low vision and use of optical aids in the elderly

PURPOSE: To determine the causes of low vision in an elderly population attended by a university visual rehabilitation service and to check for the use of prescribed optical aids. METHOD: A cross-sectional study was carried out on patients aged 60 years or over attending for the first time a university low vision service in 2001. Ophthalmic reevaluation and interview were performed by means of a structured questionnaire in 2002. RESULTS: The sample comprised 50 subjects aged between 60 and 90 years. Severe low vision (<20/200) was present in 68.0% of patients. The main cause of low vision was age-related macular degeneration (44.0%). Regarding literacy, 16.0% were illiterate and 72.0% had completed fundamental schooling. Thirty-one patients (62.0%) had been prescribed optical aids; 54.8% of these patients stated that they use them. A majority (70.6%) held a favorable opinion of these aids. CONCLUSIONS: The main cause of low vision was age-related macular degeneration. Approximately half of those receiving prescriptions reported actually using the aids in their daily activities. Making best use of residual vision in the elderly population with visual impairment is a priority, given the social context, if the independence necessary for enhanced quality of life is to be achieved.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.

The value creation radar applied to the space engineering sector

This case study illustrates the application of the Value Creation Radar (VCR) to SenSyF, an Earth Observation (EO) system which was developed by Deimos Engenharia S.A. (DME), the Portuguese affiliate of Elecnor Deimos. It describes how a team of consultants adopted the VCR in order to find new market applications for SenSyF, selected the one with the highest potential, and defined a path to guarantee a sustainable market launch. This case study highlights the main challenges of bringing a technology-driven company closer to the market in the pursuit of long-term sustainability, while not compromising its technological capabilities