Release of Cyanopyridine from a Ruthenium Complex Adsorbed on Gold: Surface-Enhanced Raman Scattering, Electrochemistry, and Density Functional Theory Analyses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pluronics F-127/L-81 Binary Hydrogels as Drug-Delivery Systems: Influence of Physicochemical Aspects on Release Kinetics and Cytotoxicity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fluoride release and secondary caries inhibition by adhesive systems on root dentine

This study tested the fluoride-release rate and the root caries inhibitory effect of dental adhesives. In phase 1, the fluoride released from samples (n = 5) of the adhesives A (Optibond Solo), B (One-up Bond F), C (Prime & Bond NT), D (Tenure Quick), and also of the controls [+] (glass-ionomer cement) and [-] (non-fluoride releasing adhesive), was quantified on a daily basis during a pH-cycling, caries-simulating phenomenon. In phase 2, restorations were made in bovine root dentine slabs (n = 16) with the same adhesives associated with a non-fluoridated composite. Control [+] restorations were made entirely with glass-ionomer cement. Specimens were thermocycled and submitted to the pH-cycling regimen. Demineralization areas and the presence of the wall lesion (WL) and the inhibition zone (IZ) were determined by polarizing light microscopy in dentine adjacent to the restoration. The highest concentration of fluoride was released by the control [+]; adhesives A, B and C, also released fluoride. No detectable amount of fluoride was released by D or [-]. Smaller areas of demineralization were found with control [+], whereas the demineralization areas of adhesives A-D and [-] did not differ from each other. No WL was detected, and higher percentages of IZ were recorded to [+] and to adhesive A. Although some dental adhesives were able to release fluoride, they could not inhibit secondary caries development as well as the glass-ionomer cement.

Caffeic Acid Phenethyl Ester: Consequences of Its Hydrophobicity in the Oxidative Functions and Cytokine Release by Leukocytes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development of organic-inorganic polymeric film formers for controlled drug release and wound care

Film forming polymeric systems represents a new and unexplored technology of systems forskin or wounds protection and for controlled drug release. The aim of this work was to study the use of polymeric organic-inorganic ureasil-polyether hybrids synthesized by the sol-gel process as film forming system containing silver sulfadiazine as model drug. The film formationtime can be controlled by changing the precursor/catalyst ratio used during the step of hydrolysis and condensations. The results showed that the precursor/catalyst proportion influences both the visual characteristics and time required to form the film. The precursor/catalyst ratio equal to 20.8 m/v was considered ideal due to promote the homogeneous and transparent film formation in less than 5 minutes. The release profile of sulfadiazine is dependent on the characteristics of the matrixes: matrix more hydrophobic as ureasil-POP provided a slowed released mainly due to the low swelling of the matrix. The more hydrophilic ureasil-POE matrix presents a large capacity to swell and favors the faster release of the drug. The set of results showed the possibility of future use of these systems for treating wounds caused by burns.

A novel automated alternating current biosusceptometry method to characterization of controlled-release magnetic floating tablets of metronidazole

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adubação nitrogenada na cultura do milho com ureia revestida por diferentes fontes de polímeros

In view of theoretic increase in efficiency of nitrogen fertilizers for controlled release, this study aimed to evaluate the effect of nitrogen, using conventional urea and ureas coated by different polymers, in the leaf N content, leaf chlorophyll index, components production and grain yield of irrigated corn in growing season and second crop in the savannah region. The experiments were conducted at experimental area belonging to UNESP - Ilha Solteira, located in Selviria - MS in a dystrophic Red Latosol (Haplustox), clayey texture. The statistical design was randomized blocks, with four repetitions, in a 4 x 4 factorial arrangement, being four nitrogen doses (0, 40, 80 and 120 kg ha(-1)) applied at sidedressing and four urea sources (a conventional urea and three coated with polymers in different compositions and concentrations). The coated ureas are not efficient under the soil and climate conditions studied of the savanna, because they provided results similar to the conventional urea for the production components and grain yield of corn in the first and second crop. The increment of nitrogen doses increase linearly the leaf N content and grain yield of corn in the first and second crop.

NUTRITIONAL STATUS AND LEVELS OF HEAVY METALS IN LETTUCE PLANTS FERTILIZED WITH ORGANIC COMPOUNDS

The use of organic compounds has been a good option to reduce spending on fertilizers, and gain increased productivity in the cultivation of lettuce. However, given the wide variety of raw materials used in the preparation of organic compounds, studies are needed to evaluate its effects on the release of essential nutrients to plants and on the release of contaminants such as heavy metals. The aim of this study was to evaluate the mineral nutrition and heavy metal contamination of lettuce in soils treated with doses and types of compost. The experiment was conducted in a greenhouse in randomized blocks in factorial scheme 5x4, with five types of organic compounds and four nitrogen levels (0, 35, 70 and 140 kg ha(-1) of N), with four replications. In general, the doses of the compounds were not enough to provide the necessary quantity of nutrients to the lettuce, with the exception of nitrogen. There was no increase in levels of heavy metals in the soil above that allowed by Brazilian legislation. Furthermore, compounds based on manure plus grass, and commercial compound caused increases in Zn concentration in plants at levels above the recommended for consumed.

SIMULATION OF USE AND MANAGEMENT EFFECTS ON THE SOIL ORGANIC MATTER POOLS OF THE ATLANTIC FOREST BIOME, BRAZIL

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Improved pretreatments applied to the sugarcane bagasse and release of lignin and hemicellulose from the cellulose-enriched fractions by sulfuric acid hydrolysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of stryphnodendron sp. release using natural rubber latex membrane as carrier

Natural rubber latex from Hevea brasiliensis has interesting characteristics related to this work such as: it is easy to manipulate, low cost, can stimulate the natural angiogenesis, is a biocompatible material and presents high mechanical resistance. The aim of this study was to develop a novel sustained delivery system for Stryphnodendron sp. based on Natural Rubber Latex (NRL) membranes and to study the Stryphnodendron sp. delivery system behavior. Stryphnodendron sp., commonly known as barbatimao is extensively used in folk medicine for the treatment of diarrhoea, gynaecological problems and for healing wounds. The stem bark of this species is mentioned in the Brazilian Pharmacopeia with a content of at least 20% of tannins. Previous studies showed significant cicatrizant properties, anti-inflammatory activity and gastric anti-ulcerogenic effects for the stem bark crude extract. One possible way to accelerate the tissue repair process, it was incorporated the Stryphnodendron sp. extract in NRL membranes. Stryphnodendron sp extract was incorporated into the NRL, by mixing it in solution for in vitro protein delivery experiments. Results show that the NRL membrane can release Stryphnodendron sp. for up to 49.89% of its Stryphnodendron sp. content for up 400 h. The kinetics of the extract release could be fitted with double exponential function, with two characteristic times of 0.78 and 133.22 h. In this study, we demonstrated that the induced angiogenesis provided by NRL membranes combined with a controlled release of extract is relevant for biomedical applications.

Casearia sylvestris Swartz Extract Release Using Natural Rubber Latex Biomembranes as Carrier

The Natural Rubber Latex (NRL) from Hevea brasiliensis has shown promise in biomedical applications due to its low cost, easy handling, mechanical properties and biocompatibility, being used for bone regeneration and wound healing due to its natural stimulus to angiogenesis. The aim of this work was to incorporate Casearia sylvestris Sw. extract in NRL biomembranes and study its release behavior. The complex membrane-extract has as object of study a new approach of using C. sylvestris extract in the treatment of wounds, for possessing antiseptic activity, anti-inflammatory and analgesic properties. The C. sylvestris species (Salicaceae), popularly known as "guaçatonga", presents great distribution and is used in folk medicine as antiulcer, wound healing, anti-snake venom, properties which have been proven and related to clerodane diterpenes (casearins A-X). The release rate of C. sylvestris compounds from extract-membrane complex was monitored and analyzed using the method of optical spectroscopy (UV-VIS). The release varied with temperature ranging from 14 to 33 days, releasing more than 90%, with an interesting and promising biomedical application, such as wound healing and burns.

Ciprofloxacin Release Using Natural Rubber Latex Membranes as Carrier

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Potencial de uso agrícola de levedura seca inativa de cana-de-açúcar e de resíduos orgânicos

Pós-graduação em Agronomia (Ciência do Solo) - FCAV