Neotectonics of the southwest Portugal mainland : implications on the regional seismic hazard

Tese de doutoramento, Geologia (Geodinâmica Interna), Universidade de Lisboa, Faculdade de Ciências, 2015

Floating on the same plane: metropolis, money and the culture of abstraction

This article argues that the emergence of a trans-disciplinary discourse of ‘visual culture’ must be understood as, above all, a constitutively urban phenomenon. More specifically, it is in the historically new form of the capitalist metropolis, as described most famously by Simmel, that the ‘hyper-stimulus’ of modern visual culture has its social and spatial conditions. Paradoxically, however, it is as a result of this that visual culture studies is also intrinsically ‘haunted’ by a certain spectre of the invisible: one rooted in those forms of ‘real abstraction’ which Marx identifies with the commodity and the money form. Considering, initially, the canonical urban visual forms of the collage and the spectacle, these are each read in a certain relation to Simmel’s account of metropolitan life and of the money form, and, through this, to what the author claims are those forms of social and spatial abstraction that must be understood to animate them. Finally, the article returns to the entanglement of the visible and invisible entailed by this, and concludes by making some tentative suggestions about something like a paradoxical urban ‘aesthetic’ of abstraction on such a basis.

Influence of selenization pressure on the growth of Cu2ZnSnSe4 films from stacked metallic layers

Cu2ZnSnSe4 (CZTSe) is a p-type semiconductor with a high absorption coefficient, 104 to 105 cm-1, and is being seen as a possible replacement for Cu(In,Ga)Se2 in thin film solar cells. Yet, there are some fundamental properties of CZTSe that are not well known, one of them is its band gap. In order to resolve its correct value it is necessary to improve the growth conditions to ensure that single phase crystalline thin films are obtained. One of the problems encountered when growing CZTSe is the loss of Sn through evaporation of SnSe. Stoichiometric films are then difficult to obtain and usually there are other phases present. One possible way to overcome this problem is to increase the pressure of growth of CZTSe. This can be done by introducing an atmosphere of an inert gas like Ar or N2. In this work we report the results of morphological, structural and optical studies of the properties of CZTSe thin films grown by selenization of DC magnetron sputtered metallic layers under different Ar pressures. The films are analysed by SEM/EDS, Raman scattering and XRD.

An analysis of the impact of bus contention on the WCET in multicores

The use of multicores is becoming widespread inthe field of embedded systems, many of which have real-time requirements. Hence, ensuring that real-time applications meet their timing constraints is a pre-requisite before deploying them on these systems. This necessitates the consideration of the impact of the contention due to shared lowlevel hardware resources like the front-side bus (FSB) on the Worst-CaseExecution Time (WCET) of the tasks. Towards this aim, this paper proposes a method to determine an upper bound on the number of bus requests that tasks executing on a core can generate in a given time interval. We show that our method yields tighter upper bounds in comparison with the state of-the-art. We then apply our method to compute the extra contention delay incurred by tasks, when they are co-scheduled on different cores and access the shared main memory, using a shared bus, access to which is granted using a round-robin arbitration (RR) protocol.

Response time analysis of COTS-Based multicores considering the contention on the shared memory bus

The current industry trend is towards using Commercially available Off-The-Shelf (COTS) based multicores for developing real time embedded systems, as opposed to the usage of custom-made hardware. In typical implementation of such COTS-based multicores, multiple cores access the main memory via a shared bus. This often leads to contention on this shared channel, which results in an increase of the response time of the tasks. Analyzing this increased response time, considering the contention on the shared bus, is challenging on COTS-based systems mainly because bus arbitration protocols are often undocumented and the exact instants at which the shared bus is accessed by tasks are not explicitly controlled by the operating system scheduler; they are instead a result of cache misses. This paper makes three contributions towards analyzing tasks scheduled on COTS-based multicores. Firstly, we describe a method to model the memory access patterns of a task. Secondly, we apply this model to analyze the worst case response time for a set of tasks. Although the required parameters to obtain the request profile can be obtained by static analysis, we provide an alternative method to experimentally obtain them by using performance monitoring counters (PMCs). We also compare our work against an existing approach and show that our approach outperforms it by providing tighter upper-bound on the number of bus requests generated by a task.

Effect of hole drilling at the overlap on the strength of single-lap joints

Bonded unions are gaining importance in many fields of manufacturing owing to a significant number of advantages to the traditional fastening, riveting, bolting and welding techniques. Between the available bonding configurations, the single-lap joint is the most commonly used and studied by the scientific community due to its simplicity, although it endures significant bending due to the non-collinear load path, which negatively affects its load bearing capabilities. The use of material or geometric changes in single-lap joints is widely documented in the literature to reduce this handicap, acting by reduction of peel and shear peak stresses at the damage initiation sites in structures or alterations of the failure mechanism emerging from local modifications. In this work, the effect of hole drilling at the overlap on the strength of single-lap joints was analyzed experimentally with two main purposes: (1) to check whether or not the anchorage effect of the adhesive within the holes is more preponderant than the stress concentrations near the holes, arising from the sharp edges, and modification of the joints straining behaviour (strength improvement or reduction, respectively) and (2) picturing a real scenario on which the components to be bonded are modified by some external factor (e.g. retrofitting of decaying/old-fashioned fastened unions). Tests were made with two adhesives (a brittle and a ductile one) varying the adherend thickness and the number, layout and diameter of the holes. Experimental testing showed that the joints strength never increases from the un-modified condition, showing a varying degree of weakening, depending on the selected adhesive and hole drilling configuration.

A system verification strategy based on the BST infrastructure

A good verification strategy should bring near the simulation and real functioning environments. In this paper we describe a system-level co-verification strategy that uses a common flow for functional simulation, timing simulation and functional debug. This last step requires using a BST infrastructure, now widely available on commercial devices, specially on FPGAs with medium/large pin-counts.

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

European Union emissions trading scheme impact on the Spanish electricity price during phase II and phase III implementation

The European Union Emissions Trading Scheme (EU ETS) is a cornerstone of the European Union's policy to combat climate change and its key tool for reducing industrial greenhouse gas emissions cost-effectively. The purpose of the present work is to evaluate the influence of CO2 opportunity cost on the Spanish wholesale electricity price. Our sample includes all Phase II of the EU ETS and the first year of Phase III implementation, from January 2008 to December 2013. A vector error correction model (VECM) is applied to estimate not only long-run equilibrium relations, but also short-run interactions between the electricity price and the fuel (natural gas and coal) and carbon prices. The four commodities prices are modeled as joint endogenous variables with air temperature and renewable energy as exogenous variables. We found a long-run relationship (cointegration) between electricity price, carbon price, and fuel prices. By estimating the dynamic pass-through of carbon price into electricity price for different periods of our sample, it is possible to observe the weakening of the link between carbon and electricity prices as a result from the collapse on CO2 prices, therefore compromising the efficacy of the system to reach proposed environmental goals. This conclusion is in line with the need to shape new policies within the framework of the EU ETS that prevent excessive low prices for carbon over extended periods of time.

A Review on the Characterization of Signals and Systems by Power Law Distributions

Power laws, also known as Pareto-like laws or Zipf-like laws, are commonly used to explain a variety of real world distinct phenomena, often described merely by the produced signals. In this paper, we study twelve cases, namely worldwide technological accidents, the annual revenue of America׳s largest private companies, the number of inhabitants in America׳s largest cities, the magnitude of earthquakes with minimum moment magnitude equal to 4, the total burned area in forest fires occurred in Portugal, the net worth of the richer people in America, the frequency of occurrence of words in the novel Ulysses, by James Joyce, the total number of deaths in worldwide terrorist attacks, the number of linking root domains of the top internet domains, the number of linking root domains of the top internet pages, the total number of human victims of tornadoes occurred in the U.S., and the number of inhabitants in the 60 most populated countries. The results demonstrate the emergence of statistical characteristics, very close to a power law behavior. Furthermore, the parametric characterization reveals complex relationships present at higher level of description.

Three essays on the term structure of interest rates

A PhD Dissertation, presented as part of the requirements for the Degree of Doctor of Philosophy from the NOVA - School of Business and Economics

Conception and first results of a cross-sectional national study on the demography, disease characteristics and socioeconomics status of the Portuguese patients with multiple sclerosis : the PORT-MS study

RESUMO: Introdução e objetivos: Não existia um estudo multicêntrico que descrevesse as características dos doentes com EM, da doença em si, ou do seu tratamento, em Portugal.Métodos: Doentes McDonald 2010 positivos foram sequencialmente recrutados em 7 centros entre Maio e Novembro 2014. Aplicou-se um Caderno de Recolha de Dados incidindo na demografia, doença, educação e emprego (estudo PORT-MS). Resultados: 561 doentes incluídos. Primeiros sintomas aos 30,2±10,5 anos (RRMS 29,2±10, PPMS 39,4±11,7, p<0,001); diagnóstico 3,2±5,3 anos depois (RRMS 3,0±5,1, PPMS 4,9±2,5, p=0,002); tempo de doença após diagnóstico 9,4±7,2 anos (semelhante RRMS no diagnóstico e PPMS); idade atual 42,9±12,4 anos (grupo RRMS no diagnóstico 42,0±12,1, PPMS 52,5±11,3, p<0,001); EDSS atual 2,5 (RRMS 2.0, PPMS 6.0); proporção feminino:masculino é 2,5:1 (RRMS semelhante, PPMS 1,1:1, p<0,05); no diagnóstico RRMS 90,6%, SPMS 0,9%, PPMS 8,6%; 9,5% dos RRMS encontravam-se em SP na inclusão (nomeadamente os com mais idade no diagnóstico e/ou atualidade ou tempo de doença mais prolongado). PPMS mais frequente em doentes diagnosticados mais tardiamente (p<0,001), onde aumenta também ligeiramente a proporção de mulheres na PPMS. Nas últimas décadas: novos casos mostram estabilidade na proporção de géneros e tipos de doença; idade nos primeiros sintomas e no diagnóstico aumentou ligeiramente, tempo entre eles diminuiu ligeiramente. Proporção sob DMT (Maio 2014): global 84,5%; atualmente RRMS 90,4%; SPMS 70,8%; PPMS 36,8%; progressivas agregadas 48%. Tipo de DMT, amostra global: interferões 56,5%, GA 18,4%, Natalizumab 11,6%, Fingolimod 9,7%. Global: economicamente ativos 61,5%, desemprego 13,5%, 74,1% dos não activos estão reformados por doença. Gravidezes após diagnóstico em 15% mulheres. Casos com história familiar positiva 7,8%. Discussão e conclusões: Incluída cerca de 10% da população portuguesa. Resultados congruentes com dados internacionais. Elevada proporção sob DMT, mesmo EDSS alto e formas progressivas. Terapêuticas de segunda linha sub representadas. Doentes jovens e com doença ligeira com vida económica ativa; restantes essencialmente reformados por doença.---------------- ABSTRACT : Background/aims: In Portugal, there wasn’t a multicentric study on the general characteristics (demography, disease milestones, DMT, socioeconomic status) of Multiple Sclerosis patients. Methods: Patients fulfilling McDonald 2010 criteria were sequentially recruited from May to November 2014 in 7 centers and data was systematically collected. Results: 561 patients included. First symptoms occurred at 30,2±10,5 years-old (RRMS 29,2±10, PPMS 39,4±11,7, p<0,001); diagnosis 3,2±5,3 years later (RRMS 3,0±5,1, PPMS 4,9±2,5, p=0,002); 9,4±7,2 years elapsed since diagnosis (similar for those is RRMS at diagnosis and PPMS); current age 42,9±12,4 years-old (group RRMS at diagnosis 42,0±12,1, PPMS 52,5±11,3, p<0,001); current EDSS 2,5 (RRMS 2.0, PPMS 6.0); females to males 2,5:1 (RRMS similar, PPMS 1,1:1, p<0,05); at diagnosis RRMS 90,6%, SPMS 0,9%, PPMS 8,6%; 9,5% of RRMS reached SP at inclusion (those older at diagnosis, in actuality, or with longer follow-up). PPMS more frequente in patients diagnosed at older ages (p<0,001), also slight increase in females. Along the last decades: new cases have showed stable proportions of gender and disease types; age at first symptoms and diagnosis slightly increased, time between them slightly decreased. Proportion on DMT (May 2014): 84,5% of all; 90,4% of currently in RRMS; 70,8% of SPMS; 36,8% of PPMS; 48% of progressive forms together. Type of DMT, all patients: interferons 56,5%, Glatiramer Acetate 18,4%, Natalizumab 11,6%, Fingolimod 9,7%. Economically active 61,5% of all, unemployment 13,5%, 74,1% of non-active are retired due to disease. Females pregnant after diagnosis 15%. Positive family cases in 7,8%. Discussion/Conclusions: 10% of the national MS population collected. Data generally consistente with international reports. Proportion under DMT relatively high in all disease types, but second line therapies underrepresented. Young patients with mild disease have an active economic life. Those not active are essentially retired due to disease.

On the labor share the long-run equilibrium and its adjustment process

This research computes an Equilibrium Labor Share using a VECM for a panel of 19 countries, analyzes what determines the speed at which the labor share adjusts towards that equilibrium and decomposes this adjustment in terms of real wages and employment. Results suggest that the speed at which a country adjusts decreases with employment protection legislation and labor taxes. Most countries’ labor shares adjustment is made through real wages changes instead of changing employment, suggesting that wage moderation policies may play an important role on the adjustment process without harming employment. Keywords: Equilibrium

On the labor share the long-run equilibrium and its adjustment process

This research computes an Equilibrium Labor Share using a VECM for a panel of 19 countries, analyzes what determines the speed at which the labor share adjusts towards that equilibrium and decomposes this adjustment in terms of real wages and employment. Results suggest that the speed at which a country adjusts decreases with employment protection legislation and labor taxes. Most countries’ labor shares adjustment is made through real wages changes instead of changing employment, suggesting that wage moderation policies may play an important role on the adjustment process without harming employment.

What do broadband consumers want? Design and execution of a questionnaire on demand for bundled services on the Portuguese telecomunications market

The report addresses the question of what are the preferences of broadband consumers on the Portuguese telecommunication market. A triple play bundle is being investigated. The discrete choice analysis, adopted in the study, base on 110 responses, mainly from NOVA students. The data for the analysis was collected via manually designed on-line survey. The results show that the price attribute is relatively the most important one while the television attribute is being overlooked in the decision making process. Main effects examined in the research are robust. In addition, "extras" components are being tested in terms of users' preferences.