Parameter estimation in a growth model for a biological population

The motivating problem concerns the estimation of the growth curve of solitary corals that follow the nonlinear Von Bertalanffy Growth Function (VBGF). The most common parameterization of the VBGF for corals is based on two parameters: the ultimate length L∞ and the growth rate k. One aim was to find a more reliable method for estimating these parameters, which can capture the influence of environmental covariates. The main issue with current methods is that they force the linearization of VBGF and neglect intra-individual variability. The idea was to use the hierarchical nonlinear model which has the appealing features of taking into account the influence of collection sites, possible intra-site measurement correlation and variance heterogeneity, and that can handle the influence of environmental factors and all the reliable information that might influence coral growth. This method was used on two databases of different solitary corals i.e. Balanophyllia europaea and Leptopsammia pruvoti, collected in six different sites in different environmental conditions, which introduced a decisive improvement in the results. Nevertheless, the theory of the energy balance in growth ascertains the linear correlation of the two parameters and the independence of the ultimate length L∞ from the influence of environmental covariates, so a further aim of the thesis was to propose a new parameterization based on the ultimate length and parameter c which explicitly describes the part of growth ascribable to site-specific conditions such as environmental factors. We explored the possibility of estimating these parameters characterizing the VBGF new parameterization via the nonlinear hierarchical model. Again there was a general improvement with respect to traditional methods. The results of the two parameterizations were similar, although a very slight improvement was observed in the new one. This is, nevertheless, more suitable from a theoretical point of view when considering environmental covariates.

Photoinduced electronic transitions and leakage correlation to defects/dislocations in GaN heterostructures

III-nitride materials are very promising for high speed electronics/optical applications but still suffer in performance due to problems during high quality epitaxial growth, evolution of dislocation and defects, less understanding of fundamental physics of materials/processing of devices etc. This thesis mainly focus on GaN based heterostructures to understand the metal-semiconductor interface properties, 2DE(H)G influence on electrical and optical properties, and deep level states in GaN and InAlN, InGaN materials. The detailed electrical characterizations have been employed on Schottky diodes at GaN and InAl(Ga)N/GaN heterostructures in order to understand the metal-semiconductor interface related properties in these materials. I have observed the occurrence of Schottky barrier inhomogenity, role of dislocations in terms of leakage and creating electrically active defect states within energy gap of materials. Deep level transient spectroscopy method is employed on GaN, InAlN and InGaN materials and several defect levels have been observed related to majority and minority carriers. In fact, some defects have been found common in characteristics in ternary layers and GaN layer which indicates that those defect levels are from similar origin, most probably due to Ga/N vacancy in GaN/heterostructures. The role of structural defects, roughness has been extensively understood in terms of enhancing the reverse leakage current, suppressing the mobility in InAlN/AlN/GaN based high electron mobility transistor (HEMT) structures which are identified as key issues for GaN technology. Optical spectroscopy methods have been employed to understand materials quality, sub band and defect related transitions and compared with electrical characterizations. The observation of 2DEG sub band related absorption/emission in optical spectra have been identified and proposed for first time in nitride based polar heterostructures, which is well supported with simulation results. In addition, metal-semiconductor-metal (MSM)-InAl(Ga)N/GaN based photodetector structures have been fabricated and proposed for achieving high efficient optoelectronics devices in future.

The C-4-Dicarboxylate carriers DcuB and DctA of Escherichia coli: function as cosensors and topology

Das fakultativ anaerobe Enterobakterium Escherichia coli nutzt C4-Dicarboxylate sowohl unter aeroben als auch anaeroben Bedingungen als Kohlenstoff- und Energiequelle. Die Aufnahme der C4-Dicarboxylaten und die Energiekonservierung mittels Fumaratatmung wird durch das Zweikomponentensystem DcuSR reguliert. Die Sensorhistidinkinase DcuS und der nachgeschaltete Responseregulator DcuR aktivieren bei Verfügbarkeit von C4-Dicarboxylaten die Expression der Gene für den Succinat Transporter DctA, den anaeroben Fumarat/Succinat Antiporter DcuB, die Fumarase B sowie die Fumaratreduktase FrdABCD. Die Transportproteine DctA und DcuB wiederum regulieren die Expression der DcuSR-abhängigen Gene negativ. Fehlen von DctA oder DcuB resultiert bereits ohne Effektor in einer maximalen Expression von dctA bzw. dcuB. Durch gerichtete und ungerichtete Mutagenese wurde gezeigt, dass die Transportfunktion des Carriers DcuB unabhängig von seiner regulatorischen Funktion ist. DcuB kann daher als Cosensor des DcuSR Systems angesehen werden.rnUnter Verwendung von Reportergenfusionen von C-terminal verkürzten Konstrukten von DcuB mit der Alkalischen Phosphatase und der β-Galactosidase wurde die Topologie des Multitransmembranproteins DcuB bestimmt. Zusätzlich wurde die Zugänglichkeit bestimmter Aminosäurereste durch chemische Modifikation mit membran-durchlässigen und membran-undurchlässigen Thiolreagenzien untersucht. Die erhaltenen Ergebnisse deuten auf die Existenz eines tief in die Membran reichenden, hydrophilen Kanal hin, welcher zum Periplasma hin geöffnet ist. Mit Hilfe der Topologie-Studien, des Hydropathie-Blots und der Sekundärstruktur-Vorhersage wurde ein Modell des Carriers erstellt. DcuB besitzt kurze, periplasmatisch liegende Proteinenden, die durch 12 Transmembranhelices und zwei große hydrophile Schleifen jeweils zwischen TM VII/VIII und TM XI/XII verbunden sind. Die regulatorisch relevanten Reste K353, T396 und D398 befinden sich innerhalb von TM XI sowie auf der angrenzenden cytoplasmatischen Schleife XI-XII. Unter Berücksichtigung der strukturellen und funktionellen Aspekte wurde ein Regulationsmodell erstellt, welches die gemeinsam durch DcuB und DcuS kontrollierte C4-Dicarboxylat-abhängige Genexpression darstellt. rnDer Effekt von DctA und DcuSR auf die Expression einer dctA´-´lacZ Reportergenfusion und auf die aerobe C4-Dicarboxylat-Aufnahme wurde untersucht. In-vivo FRET-Messungen weisen auf eine direkte Wechselwirkung zwischen dem Carrier DctA und dem Sensor DcuS hin. Dieses Ergebnis stützt die Theorie der Regulation von DcuS durch C4-Dicarboxylate und durch die Cosensoren DctA bzw. DcuB mittels direkter Protein-Protein Interaktion.rn

Quantum dot-dye hybrid systems for energy transfer applications

In this thesis, we focus on the preparation of energy transfer-based quantum dot (QD)-dye hybrid systems. Two kinds of QD-dye hybrid systems have been successfully synthesized: QD-silica-dye and QD-dye hybrid systems.rn rnIn the QD-silica-dye hybrid system, multishell CdSe/CdS/ZnS QDs were adsorbed onto monodisperse Stöber silica particles with an outer silica shell of thickness 2 - 24 nm containing organic dye molecules (Texas Red). The thickness of this dye layer has a strong effect on the total sensitized acceptor emission, which is explained by the increase in the number of dye molecules homogeneously distributed within the silica shell, in combination with an enhanced surface adsorption of QDs with increasing dye amount. Our conclusions were underlined by comparison of the experimental results with Monte-Carlo simulations, and by control experiments confirming attractive interactions between QDs and Texas Red freely dissolved in solution. rnrnNew QD-dye hybrid system consisting of multishell QDs and organic perylene dyes have been synthesized. We developed a versatile approach to assemble extraordinarily stable QD-dye hybrids, which uses dicarboxylate anchors to bind rylene dyes to QD. This system yields a good basis to study the energy transfer between QD and dye because of its simple and compact design: there is no third kind of molecule linking QD and dye; no spacer; and the affinity of the functional group to the QD surface is strong. The FRET signal was measured for these complexes as a function of both dye to QD ratio and center-to-center distance between QD and dye by controlling number of covered ZnS layers. Data showed that fluorescence resonance energy transfer (FRET) was the dominant mechanism of the energy transfer in our QD-dye hybrid system. FRET efficiency can be controlled by not only adjusting the number of dyes on the QD surface or the QD to dye distance, but also properly choosing different dye and QD components. Due to the strong stability, our QD-dye complexes can also be easily transferred into water. Our approach can apply to not only dye molecules but also other organic molecules. As an example, the QDs have been complexed with calixarene molecules and the QD-calixarene complexes also have potential for QD-based energy transfer study. rn

The electron antineutrino angular correlation coefficient a in free neutron decay: Testing the standard model with the aSPECT-spectrometer

The beta-decay of free neutrons is a strongly over-determined process in the Standard Model (SM) of Particle Physics and is described by a multitude of observables. Some of those observables are sensitive to physics beyond the SM. For example, the correlation coefficients of the involved particles belong to them. The spectrometer aSPECT was designed to measure precisely the shape of the proton energy spectrum and to extract from it the electron anti-neutrino angular correlation coefficient "a". A first test period (2005/ 2006) showed the “proof-of-principles”. The limiting influence of uncontrollable background conditions in the spectrometer made it impossible to extract a reliable value for the coefficient "a" (publication: Baessler et al., 2008, Europhys. Journ. A, 38, p.17-26). A second measurement cycle (2007/ 2008) aimed to under-run the relative accuracy of previous experiments (Stratowa et al. (1978), Byrne et al. (2002)) da/a =5%. I performed the analysis of the data taken there which is the emphasis of this doctoral thesis. A central point are background studies. The systematic impact of background on a was reduced to da/a(syst.)=0.61 %. The statistical accuracy of the analyzed measurements is da/a(stat.)=1.4 %. Besides, saturation effects of the detector electronics were investigated which were initially observed. These turned out not to be correctable on a sufficient level. An applicable idea how to avoid the saturation effects will be discussed in the last chapter.

Analysis and modelling of the performance of technologies for flue gas treatment in Waste-to-Energy processes

Waste management represents an important issue in our society and Waste-to-Energy incineration plants have been playing a significant role in the last decades, showing an increased importance in Europe. One of the main issues posed by waste combustion is the generation of air contaminants. Particular concern is present about acid gases, mainly hydrogen chloride and sulfur oxides, due to their potential impact on the environment and on human health. Therefore, in the present study the main available technological options for flue gas treatment were analyzed, focusing on dry treatment systems, which are increasingly applied in Municipal Solid Wastes (MSW) incinerators. An operational model was proposed to describe and optimize acid gas removal process. It was applied to an existing MSW incineration plant, where acid gases are neutralized in a two-stage dry treatment system. This process is based on the injection of powdered calcium hydroxide and sodium bicarbonate in reactors followed by fabric filters. HCl and SO2 conversions were expressed as a function of reactants flow rates, calculating model parameters from literature and plant data. The implementation in a software for process simulation allowed the identification of optimal operating conditions, taking into account the reactant feed rates, the amount of solid products and the recycle of the sorbent. Alternative configurations of the reference plant were also assessed. The applicability of the operational model was extended developing also a fundamental approach to the issue. A predictive model was developed, describing mass transfer and kinetic phenomena governing the acid gas neutralization with solid sorbents. The rate controlling steps were identified through the reproduction of literature data, allowing the description of acid gas removal in the case study analyzed. A laboratory device was also designed and started up to assess the required model parameters.

Nachweis und Charakterisierung der Ketocarotinoidakkumulation in Zygosporen des Modellorganismus Chlamydomonas reinhardtii

Ketocarotinoide sind in den Dauerstadien vieler Grünalgen anzutreffen und aufgrund ihres hohen antioxidativen Potentials vermutlich von großer Bedeutung für deren Überleben unter ungünstigen Umweltbedingungen. Daneben ist die Aufnahme von Ketocarotinoiden im Zuge der Nahrungskette für verschiedene Tiere lebensnotwendig. Trotz zahlreicher Untersuchungen des Biosynthesewegs der Ketocarotinoide, vorwiegend in der Grünalge Haematococcus pluvialis, sind viele grundlegende Aspekte der Synthese nicht verstanden. Dazu zählt neben dem genauen Reaktionsmechanismus des ketolierenden Enzyms ß-Carotin-Ketolase (BKT) vor allem der noch nicht aufgeklärte Zusammenhang zwischen Lipidsynthese und Ketocarotinoidakkumulation. Nach der Entdeckung eines zur BKT aus H. pluvialis homologen Gens in einer EST-Datenbank des Modellorganismus Chlamydomonas reinhardtii wurden im Rahmen der vorliegenden Forschungsarbeit die als orange-rot beschrieben Zygosporen von C. reinhardtii als mögliches ketocarotinoidhaltiges Zellstadium untersucht. Dabei wurden für C. reinhardtii erstmals Ketocarotinoide in Konzentrationen bis zu einem Femtomol pro Zelle nachgewiesen und mittels HPLC-Analytik, chemischer Derivatisierung und Massenspektrometrie zweifelsfrei identifiziert. Es wurden, in aufsteigender Quantität, drei Ketocarotinoide detektiert: Canthaxanthin, Astaxanthin und 4-Ketolutein. Letzteres wurde bisher selten in anderen ketocarotinoidakkumulierenden Organismen beschrieben und stellt, im Gegensatz zu den vom ß-Carotin abgeleiteten Pigmenten Astaxanthin und Canthaxanthin, ein Pigment des α-Carotin-Zweiges dar. Astaxanthin und 4-Ketolutein wurden vor allem in Form von Pigment-Fettsäureestern nachgewiesen. Mit Hilfe von Paarungsansätzen mit der lor1-Mutante, die keine α-Carotinoide synthetisieren kann, und Vergleichen mit Ketocarotinoiden aus H. pluvialis konnte gezeigt werden, dass 4 Ketolutein nur als Monoacylester in der Alge vorliegt, während Astaxanthin sowohl als Monoacyl- wie auch als Diacylester anzutreffen ist. Ketocarotinoide wurden innerhalb der ersten 14 Tage der Zygotenreife gebildet. Transmissionselektronenmikroskopische Aufnahmen der Zygoten dokumentierten, dass damit ein starker Umbau der Zelle einherging, der sich vor allem in der Reduktion des Chloroplasten und der Bildung von Lipidtröpfchen darstellte. Letztere nahmen bei reifen Zygosporen den größten Teil des Zelllumens ein und wurden mittels dünnschichtchromatografischer Analysen als Neutralfette identifiziert. Der sinkende Zellgehalt an Carotinoiden im Zuge der Zygosporenreifung und Inhibitorexperimente an reifenden Zygoten mittels Norflurazon zeigten, dass für die Ketocarotinoidakkumulation keine Neusynthese von Carotinoiden nötig ist und lassen die Hypothese zu, dass C. reinhardtii die im Zuge der Chloroplastenreduktion freigesetzten Photosynthese-Carotinoide als Substrate für die Ketocarotinoidsynthese verwendet. Physiologische Bedeutung könnte den Ketocarotinoiden vor allem beim Schutz der Speicherlipide vor Peroxidation durch reaktive Sauerstoffspezies zukommen. Diese Reservestoffe stellen die Energieversorgung während des Auskeimens der Zellen sicher. Durch den im Rahmen der vorliegenden Forschungsarbeit dokumentierten Nachweis der Ketocarotinoidakkumulation in C. reinhardtii können die Ketocarotinoidsynthese und vor allem der Zusammenhang von Lipid- und Ketocarotinoidakkumulation zukünftig mit Hilfe der für diesen Modellorganismus vorliegenden umfangreichen molekulargenetischen Methoden detailliert untersucht werden.

Total internal reflection fluorescence cross-correlation spectroscopy: theory and application for studying boundary slip phenomenon

I present a new experimental method called Total Internal Reflection Fluorescence Cross-Correlation Spectroscopy (TIR-FCCS). It is a method that can probe hydrodynamic flows near solid surfaces, on length scales of tens of nanometres. Fluorescent tracers flowing with the liquid are excited by evanescent light, produced by epi-illumination through the periphery of a high NA oil-immersion objective. Due to the fast decay of the evanescent wave, fluorescence only occurs for tracers in the ~100 nm proximity of the surface, thus resulting in very high normal resolution. The time-resolved fluorescence intensity signals from two laterally shifted (in flow direction) observation volumes, created by two confocal pinholes are independently measured and recorded. The cross-correlation of these signals provides important information for the tracers’ motion and thus their flow velocity. Due to the high sensitivity of the method, fluorescent species with different size, down to single dye molecules can be used as tracers. The aim of my work was to build an experimental setup for TIR-FCCS and use it to experimentally measure the shear rate and slip length of water flowing on hydrophilic and hydrophobic surfaces. However, in order to extract these parameters from the measured correlation curves a quantitative data analysis is needed. This is not straightforward task due to the complexity of the problem, which makes the derivation of analytical expressions for the correlation functions needed to fit the experimental data, impossible. Therefore in order to process and interpret the experimental results I also describe a new numerical method of data analysis of the acquired auto- and cross-correlation curves – Brownian Dynamics techniques are used to produce simulated auto- and cross-correlation functions and to fit the corresponding experimental data. I show how to combine detailed and fairly realistic theoretical modelling of the phenomena with accurate measurements of the correlation functions, in order to establish a fully quantitative method to retrieve the flow properties from the experiments. An importance-sampling Monte Carlo procedure is employed in order to fit the experiments. This provides the optimum parameter values together with their statistical error bars. The approach is well suited for both modern desktop PC machines and massively parallel computers. The latter allows making the data analysis within short computing times. I applied this method to study flow of aqueous electrolyte solution near smooth hydrophilic and hydrophobic surfaces. Generally on hydrophilic surface slip is not expected, while on hydrophobic surface some slippage may exists. Our results show that on both hydrophilic and moderately hydrophobic (contact angle ~85°) surfaces the slip length is ~10-15nm or lower, and within the limitations of the experiments and the model, indistinguishable from zero.

Higher-order perturbative relativistic corrections to energies and properties

Relativistic effects need to be considered in quantum-chemical calculations on systems including heavy elements or when aiming at high accuracy for molecules containing only lighter elements. In the latter case, consideration of relativistic effects via perturbation theory is an attractive option. Among the available techniques, Direct Perturbation Theory (DPT) in its lowest order (DPT2) has become a standard tool for the calculation of relativistic corrections to energies and properties.In this work, the DPT treatment is extended to the next order (DPT4). It is demonstrated that the DPT4 correction can be obtained as a second derivative of the energy with respect to the relativistic perturbation parameter. Accordingly, differentiation of a suitable Lagrangian, thereby taking into account all constraints on the wave function, provides analytic expressions for the fourth-order energy corrections. The latter have been implemented at the Hartree-Fock level and within second-order Møller-Plesset perturbaton theory using standard analytic second-derivative techniques into the CFOUR program package. For closed-shell systems, the DPT4 corrections consist of higher-order scalar-relativistic effects as well as spin-orbit corrections with the latter appearing here for the first time in the DPT series.Relativistic corrections are reported for energies as well as for first-order electrical properties and compared to results from rigorous four-component benchmark calculations in order to judge the accuracy and convergence of the DPT expansion for both the scalar-relativistic as well as the spin-orbit contributions. Additionally, the importance of relativistic effects to the bromine and iodine quadrupole-coupling tensors is investigated in a joint experimental and theoretical study concerning the rotational spectra of CH2BrF, CHBrF2, and CH2FI.

Development of a microgrid with renewable energy sources and electrochemical storage system integration

Beside the traditional paradigm of "centralized" power generation, a new concept of "distributed" generation is emerging, in which the same user becomes pro-sumer. During this transition, the Energy Storage Systems (ESS) can provide multiple services and features, which are necessary for a higher quality of the electrical system and for the optimization of non-programmable Renewable Energy Source (RES) power plants. A ESS prototype was designed, developed and integrated into a renewable energy production system in order to create a smart microgrid and consequently manage in an efficient and intelligent way the energy flow as a function of the power demand. The produced energy can be introduced into the grid, supplied to the load directly or stored in batteries. The microgrid is composed by a 7 kW wind turbine (WT) and a 17 kW photovoltaic (PV) plant are part of. The load is given by electrical utilities of a cheese factory. The ESS is composed by the following two subsystems, a Battery Energy Storage System (BESS) and a Power Control System (PCS). With the aim of sizing the ESS, a Remote Grid Analyzer (RGA) was designed, realized and connected to the wind turbine, photovoltaic plant and the switchboard. Afterwards, different electrochemical storage technologies were studied, and taking into account the load requirements present in the cheese factory, the most suitable solution was identified in the high temperatures salt Na-NiCl2 battery technology. The data acquisition from all electrical utilities provided a detailed load analysis, indicating the optimal storage size equal to a 30 kW battery system. Moreover a container was designed and realized to locate the BESS and PCS, meeting all the requirements and safety conditions. Furthermore, a smart control system was implemented in order to handle the different applications of the ESS, such as peak shaving or load levelling.

Emulazione di una colonnina di ricarica per auto elettrica tramite arduino

Internet of Energy for Electric Mobility è un progetto di ricerca europeo il cui scopo consiste nello sviluppo di infrastrutture di comunicazione, siano esse sia hardware che software, volte alla facilitazione, supporto e miglioramento di tutte quelle operazioni legate al processo di ricarica di auto elettriche. A tale progetto vi ha aderito anche l’Università di Bologna ed è stato oggetto di studio di Federico Montori e Simone Rondelli. Il primo ha dato il là allo sviluppo del progetto realizzandovi, in una fase embrionale, una piattaforma legata alla gestione di un servizio cittadino (bolognese) per la gestione di ricariche elettriche, un’applicazione mobile in grado di interagire con tale servizio ed un simulatore per la piattaforma. In un lavoro durato oltre un anno, Simone Rondelli ha ripreso il progetto di Federico Montori riscrivendone le componenti in maniera tale da migliorarne le funzionalità ed aggiungerne anche di nuove; in particolare ha realizzato in maniera efficiente un’applicazione mobile la quale si occupa di gestire la prenotazione di colonnine elettriche di ricarica e di monitorare lo stato attuale di un’auto peso, livello batteria, ecc... ). Nel marzo del 2014 è cominciato il mio contributo nel contesto di Internet of Energy di cui ne ho ereditato tutta l’architettura derivante dai due sviluppi precedenti. Il mio compito è stato quello di realizzare (cioè emulare) una colonnina di ricarica auto elettrica, tramite la piattaforma elettronica Arduino, la quale al suo primo avvio informa il database semantico del sistema (SIB) della sua presenza in maniera tale che il simulatore sia in grado di poter far ricaricare un’auto anche a questa nuova colonnina. Di conseguenza ho fatto in modo di instaurare (tramite socket) una comunicazione tra il simulatore e la colonnina così che il simulatore informi la colonnina che è stata raggiunta da un’auto e, viceversa, la colonnina informi il simulatore sullo stato di ricarica dell’auto in modo che quest’ultima possa ripartire al termine della ricarica. Ho anche realizzato un’applicazione mobile in grado di comunicare con la colonnina, il cui scopo è quello di ottenere un codice di ricarica che poi l’utente deve digitare per autenticarsi presso di essa. Realizzando tale tipo di contributo si è data dunque la possibilità di integrare una componente ”reale” con componenti simulate quali le auto del simulatore di Internet of Energy e si sono poste le basi per estensioni future, le quali permettano di integrare anche più componenti che si registrano nel sistema e danno dunque la possibilità di essere utilizzate dalle auto elettriche.

Secondary Microseisms Characterization and Green’s Function Extraction at the Larderello-Travale Geothermal Field (Italy)

Over the past ten years, the cross-correlation of long-time series of ambient seismic noise (ASN) has been widely adopted to extract the surface-wave part of the Green’s Functions (GF). This stochastic procedure relies on the assumption that ASN wave-field is diffuse and stationary. At frequencies <1Hz, the ASN is mainly composed by surface-waves, whose origin is attributed to the sea-wave climate. Consequently, marked directional properties may be observed, which call for accurate investigation about location and temporal evolution of the ASN-sources before attempting any GF retrieval. Within this general context, this thesis is aimed at a thorough investigation about feasibility and robustness of the noise-based methods toward the imaging of complex geological structures at the local (∼10-50km) scale. The study focused on the analysis of an extended (11 months) seismological data set collected at the Larderello-Travale geothermal field (Italy), an area for which the underground geological structures are well-constrained thanks to decades of geothermal exploration. Focusing on the secondary microseism band (SM;f>0.1Hz), I first investigate the spectral features and the kinematic properties of the noise wavefield using beamforming analysis, highlighting a marked variability with time and frequency. For the 0.1-0.3Hz frequency band and during Spring- Summer-time, the SMs waves propagate with high apparent velocities and from well-defined directions, likely associated with ocean-storms in the south- ern hemisphere. Conversely, at frequencies >0.3Hz the distribution of back- azimuths is more scattered, thus indicating that this frequency-band is the most appropriate for the application of stochastic techniques. For this latter frequency interval, I tested two correlation-based methods, acting in the time (NCF) and frequency (modified-SPAC) domains, respectively yielding esti- mates of the group- and phase-velocity dispersions. Velocity data provided by the two methods are markedly discordant; comparison with independent geological and geophysical constraints suggests that NCF results are more robust and reliable.

Internally contracted multireference coupled-cluster methods

This thesis details the development of quantum chemical methods for the accurate theoretical description of molecular systems with a complicated electronic structure. In simple cases, a single Slater determinant, in which the electrons occupy a number of energetically lowest molecular orbitals, offers a qualitatively correct model. The widely used coupled-cluster method CCSD(T) efficiently includes electron correlation effects starting from this determinant and provides reaction energies in error by only a few kJ/mol. However, the method often fails when several electronic configurations are important, as, for instance, in the course of many chemical reactions or in transition metal compounds. Internally contracted multireference coupled-cluster methods (ic-MRCC methods) cure this deficiency by using a linear combination of determinants as a reference function. Despite their theoretical elegance, the ic-MRCC equations involve thousands of terms and are therefore derived by the computer. Calculations of energy surfaces of BeH2, HF, LiF, H2O, N2 and Be3 unveil the theory's high accuracy compared to other approaches and the quality of various hierarchies of approximations. New theoretical advances include size-extensive techniques for removing linear dependencies in the ic-MRCC equations and a multireference analog of CCSD(T). Applications of the latter method to O3, Ni2O2, benzynes, C6H7NO and Cr2 underscore its potential to become a new standard method in quantum chemistry.

Study of a new method for high energy top tagging at the ATLAS experiment

Since its discovery, top quark has represented one of the most investigated field in particle physics. The aim of this thesis is the reconstruction of hadronic top with high transverse momentum (boosted) with the Template Overlap Method (TOM). Because of the high energy, the decay products of boosted tops are partially or totally overlapped and thus they are contained in a single large radius jet (fat-jet). TOM compares the internal energy distributions of the candidate fat-jet to a sample of tops obtained by a MC simulation (template). The algorithm is based on the definition of an overlap function, which quantifies the level of agreement between the fat-jet and the template, allowing an efficient discrimination of signal from the background contributions. A working point has been decided in order to obtain a signal efficiency close to 90% and a corresponding background rejection at 70%. TOM performances have been tested on MC samples in the muon channel and compared with the previous methods present in literature. All the methods will be merged in a multivariate analysis to give a global top tagging which will be included in ttbar production differential cross section performed on the data acquired in 2012 at sqrt(s)=8 TeV in high phase space region, where new physics processes could be possible. Due to its peculiarity to increase the pT, the Template Overlap Method will play a crucial role in the next data taking at sqrt(s)=13 TeV, where the almost totality of the tops will be produced at high energy, making the standard reconstruction methods inefficient.

Die Bedeutung von molekularem Sauerstoff für die Evolution des genetischen Codes

Die Entstehung und Evolution des genetischen Codes, der die Nukleotidsequenz der mRNA in die Aminosäuresequenz der Proteine übersetzt, zählen zu den größten Rätseln der Biologie. Die ersten Organismen, die vor etwa 3,8 Milliarden Jahren auf der Erde auftraten, nutzten einen ursprünglichen genetischen Code, der vermutlich ausschließlich abiotisch verfügbare Aminosäuren terrestrischer oder extraterrestrischer Herkunft umfasste. Neue Aminosäuren wurden sukzessive biosynthetisiert und selektiv in den Code aufgenommen, welcher in der modernen Form aus bis zu 22 Aminosäuren besteht. Die Ursachen für die Selektion und die Chronologie ihrer Aufnahme sind bis heute unbekannt und sollten im Rahmen der vorliegenden Arbeit erforscht werden. Auf Grundlage quanten-chemischer Berechnungen konnte in dieser Arbeit zunächst ein Zusammenhang zwischen der HOMO-LUMO-Energiedifferenz (H-L-Distanz), die ein inverses quanten-chemisches Korrelat für allgemeine chemische Reaktivität darstellt, und der chronologischen Aufnahme der Aminosäuren in den genetischen Code aufgezeigt werden. Demnach sind ursprüngliche Aminosäuren durch große H-L-Distanzen und neue Aminosäuren durch kleine H-L-Distanzen gekennzeichnet. Bei einer Analyse des Metabolismus von Tyrosin und Tryptophan, bei denen es sich um die beiden jüngsten Standard-Aminosäuren handelt, wurde ihre Bedeutung als Vorläufer von Strukturen ersichtlich, die sich durch eine hohe Redox-Aktivität auszeichnen und deren Synthese gleichzeitig molekularen Sauerstoff erfordert. Aus diesem Grund wurden die Redox-Aktivitäten der 20 Standard-Aminosäuren gegenüber Peroxylradikalen und weiteren Radikalen getestet. Die Untersuchungen ergaben eine Korrelation zwischen evolutionärem Auftreten und chemischer Reaktivität der jeweiligen Aminosäure, die sich insbesondere in der effizienten Reaktion zwischen Tryptophan bzw. Tyrosin und Peroxylradikalen widerspiegelte. Dies indizierte eine potentielle Bedeutung reaktiver Sauerstoffspezies (ROS) bei der Konstituierung des genetischen Codes. Signifikante Mengen an ROS wurden erst zu Beginn der Oxygenierung der Geobiosphäre, die als Great Oxidation Event (GOE) bezeichnet wird und vor circa 2,3 Milliarden Jahren begann, gebildet und müssen zur oxidativen Schädigung vulnerabler, zellulärer Strukturen geführt haben. Aus diesem Grund wurde das antioxidative Potential von Aminosäuren beim Prozess der Lipidperoxidation untersucht. Es konnte gezeigt werden, dass lipophile Derivate von Tryptophan und Tyrosin befähigt sind, die Peroxidation von Rattenhirnmembranen zu verhindern und humane Fibroblasten vor oxidativem Zelltod zu schützen. Daraus gründete sich das in dieser Arbeit aufgestellte Postulat eines Selektionsvorteils primordialer Organismen während des GOEs, die Tryptophan und Tyrosin als redox-aktive Aminosäuren in Membranproteine einbauen konnten und somit vor Oxidationsprozessen geschützt waren. Demzufolge wurde die biochemische Reaktivität als Selektionsparameter sowie oxidativer Stress als prägender Faktor der Evolution des genetischen Codes identifiziert.