CFD Modelling of Direct Contact Condensation in Suppression Pools by Applying Condensation Models of Separated Flow

The condensation rate has to be high in the safety pressure suppression pool systems of Boiling Water Reactors (BWR) in order to fulfill their safety function. The phenomena due to such a high direct contact condensation (DCC) rate turn out to be very challenging to be analysed either with experiments or numerical simulations. In this thesis, the suppression pool experiments carried out in the POOLEX facility of Lappeenranta University of Technology were simulated. Two different condensation modes were modelled by using the 2-phase CFD codes NEPTUNE CFD and TransAT. The DCC models applied were the typical ones to be used for separated flows in channels, and their applicability to the rapidly condensing flow in the condensation pool context had not been tested earlier. A low Reynolds number case was the first to be simulated. The POOLEX experiment STB-31 was operated near the conditions between the ’quasi-steady oscillatory interface condensation’ mode and the ’condensation within the blowdown pipe’ mode. The condensation models of Lakehal et al. and Coste & Lavi´eville predicted the condensation rate quite accurately, while the other tested ones overestimated it. It was possible to get the direct phase change solution to settle near to the measured values, but a very high resolution of calculation grid was needed. Secondly, a high Reynolds number case corresponding to the ’chugging’ mode was simulated. The POOLEX experiment STB-28 was chosen, because various standard and highspeed video samples of bubbles were recorded during it. In order to extract numerical information from the video material, a pattern recognition procedure was programmed. The bubble size distributions and the frequencies of chugging were calculated with this procedure. With the statistical data of the bubble sizes and temporal data of the bubble/jet appearance, it was possible to compare the condensation rates between the experiment and the CFD simulations. In the chugging simulations, a spherically curvilinear calculation grid at the blowdown pipe exit improved the convergence and decreased the required cell count. The compressible flow solver with complete steam-tables was beneficial for the numerical success of the simulations. The Hughes-Duffey model and, to some extent, the Coste & Lavi´eville model produced realistic chugging behavior. The initial level of the steam/water interface was an important factor to determine the initiation of the chugging. If the interface was initialized with a water level high enough inside the blowdown pipe, the vigorous penetration of a water plug into the pool created a turbulent wake which invoked the chugging that was self-sustaining. A 3D simulation with a suitable DCC model produced qualitatively very realistic shapes of the chugging bubbles and jets. The comparative FFT analysis of the bubble size data and the pool bottom pressure data gave useful information to distinguish the eigenmodes of chugging, bubbling, and pool structure oscillations.

Mathematical model to estimate of the deterioration of wooden poles in contact with soil used in rural areas

In São Paulo State, mainly in rural areas, the utilization of wooden poles is observed for different purposes. In this context, wood in contact with the ground presents faster deterioration, which is generally associated to environmental factors and, especially to the presence of fungi and insects. With the use of mathematical models, the useful life of wooden structures can be predicted by obtaining "climatic indexes" to indicate, comparatively among the areas studied, which have more or less tendency to fungi and insects attacks. In this work, by using climatological data of several cities at São Paulo State, a simplified mathematical model was obtained to measure the aggressiveness of the wood in contact with the soil.

Distribution pattern, surface tension and contact angle of herbicides associated to adjuvants on spraying and control of Ipomoea hederifolia under rainfall incidence

ABSTRACTScarlet Morning Glory is considered to be an infesting weed that affects several crops and causes serious damage. The application of chemical herbicides, which is the primary control method, requires a broad knowledge of the various characteristics of the solution and application technology for a more efficient phytosanitary treatment. Therefore this study aimed to characterize the effect of rainfall incidence on the control of Ipomoea hederifolia, considering droplet size, surface tension, contact angle of droplets formed by herbicides liquid on vegetal and artificial surfaces, associated to adjuvants and the volumetric distribution profile of the spray jet. The addition of the adjuvants to the herbicide spraying liquid improved the application quality, as it influenced the angle formed by the spray by broadening the deposition band of the spray nozzle and thus the possible distance between the nozzles on spray boom and due the changes at droplet size, which contribute to a safety application. The rainfall occurrence affected negatively the weed control with the different spraying liquids and also the dry matter weight, suggesting that the phytosanitary product applied was washed off.

En gestaltning av individens erfarenhetsbaserade kunskap inom diabetesvården

The aim of this study is to form the experience-based knowledge of diabetics. The broader intent is to be able to transform this experience-based knowledge as an asset within caring. In this study, a theoretical contact for the empirical data is presented through phronesis, i.e. practical wisdom. Phronesis can be seen as the most suitable form of knowledge to be able to deepen the individual's understanding of experiencebased knowledge. For this research, hermeneutic phenomenology was chosen. Abductive reasoning was the method chosen to approach the data collected through repeated deep interviews with individuals with personal experience of diabetes and the use of insulin pumps. The abductive approach fascilitates a broader interpretation of the primary empirical results via a theory of philosophy of science, such as phronesis, the life-world and the negativity of the experience. The latent message of the empirical data is thereby also additionally highlighted. The synthesis reveals that experience-based knowledge arrives with time, it is personified and praxis-oriented, and before this time, the knowledge and security must be provided by the established care, by people close to the individual or by other external sources. The experience-based knowledge has strenghts and weaknesses. The knowledge is further categorized by the individual's ability to discern and make judgement. Additionally, the experience-based kowledge is a reflecting and action-based knowledge striving to improve the care provided. The experience-based knowledge held by the individual is potentially a great instrument towards improving general knowledge with possible practical applications within the diabetic care. Furthermost, in practical suggestions to fascilitate care. In generally applying knowledge gathered from the individual's experiental point of view, there are inherent risks. These risks could potentially be eliminated through the adoption of a concept where the established care could function as a quality guarantor. A concept taking into account the experiencebased knowledge as a source of information and knowledge in the care for diabetics. Co-created knowledge and understanding is a position found in both self-care and pump-treatment. It is also found through the optimal application of the experience-based knowledge of the individual as well as the knowledge found within the established care, in order to fascilitate well-being. This as expressed by the individual's phronesis-based knowledge.

Ambidextrous leadership in customer contact centre organization

In a modern dynamic environment organizations are facing new requirements for success and competitive advantage. This also sets new requirements for leaders. The term of ambidexterity is used in relation with organizations that are able to manage short-term efficiency and long-term innovation simultaneously. Ambidextrous leaders have the same capability at an individual level. They are able to balance between efficiency and flexibility. This study examined the confrontation of these two competing concepts in the leadership perspective. The aim of the study was to understand this recently arisen concept and its antecedents and examine what is currently known about ambidextrous leadership. This was a case study with data collected through theme interviews in a result orientated customer centre organization that has a cultural change at hand when it comes to leadership and empowerment. Organization wants to be efficient and flexible at the same time (a.k.a. ambidextrous) and that requires new type of leadership. In this study the aim was to describe the capabilities and criteria for ambidextrous leader and examine the leadership roles related to ambidextrous leadership in different hierarchical levels. The case organization had also created systematic means to support this cultural change and the effects of the process related to leadership were studied. This study showed that the area is yet widely unexplored and contradictory views are presented. This study contributes to the deprivation of study of ambidexterity in leadership and individuals. The study presents a description of ambidextrous leadership and describes the capabilities of ambidextrous leader. Ambidextrous leaders are able to make cognitive decisions between their leadership style according to situation that requires either leadership related to efficiency such as transactional leadership or leadership related to flexibility such as transformational leadership. Their leadership style supports both short-term and long-term goals. This study also shows that the role of top management is vital and operational leaders rely on their example.

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1811 (T4).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1826 (T31).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1826 (T30).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1829 (T37).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1821 (T23).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1822 (T24).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1823 (T25).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1828 (T35).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1856 (T10,SER2).

Journal des avoués : ou Recueil général des lois, décrets impériaux, décisions du Conseil d'état et de ministres, arrêts et jugemens qui fixent un point de la procédure civile, criminelle ou commerciale

1827 (T32).