Salomé et Jean Baptiste. Réinvestissements symboliques et récritures d'un mythe dans la littérature et dans l'art (1870-1914)

La publication de nombreuses œuvres, à la fois littéraires et picturales, entre 1870 et 1914, inspirées par l’épisode biblique du meurtre de Jean Baptiste par Salomé, s’inscrit dans une crise qui touche à cette époque, en Europe, aussi bien le sujet que la notion de représentation. Le mythe de Salomé permet de poursuivre une réflexion de nature littéraire, historique et esthétique concernant le processus d’autonomisation de l’art. À partir des sources bibliques et antiques, dans lesquelles Salomé et Jean Baptiste incarnent respectivement le monde païen en conflit avec le monde chrétien, ces deux personnages font graduellement leur entrée dans l’univers de la fiction. Ils sont au cœur de la transition d’une lecture transcendante — reliée particulièrement à la tradition catholique — de l’épisode tragique qui les unit, à une lecture immanente qui en fait deux instances purement esthétiques. La danseuse et le dernier des prophètes émergent dans la littérature et dans l’art occidentaux comme deux pôles symboliques, liés l’un à l’autre par différents types de relation, susceptibles d’être librement réinvestis par de nouvelles significations et à l’écart des conventions. Si, dans la première partie du XIXe siècle, Salomé et Jean Baptiste sont encore liés à leur sens orthodoxe, au tournant du siècle ils finissent par s’autonomiser de l’Écriture et donnent lieu à de multiples récritures et à des adaptations inattendues. Celles-ci ressortissent alors moins du blasphème à proprement parler que d’un témoignage emblématique d’une transformation du rapport que l’artiste entretient avec son œuvre. Celui-ci, en s’identifiant avec le prophète décollé, se mesure à l’œuvre d’art, qui est incarnée par Salomé. La relation entre Salomé et Jean Baptiste, dans ces diverses représentations, exprime et reflète le moment où art et littérature se reconnaissent comme fictions.

Design and implementation of an anonymous peer-to-peer iaas cloud

Cloud services are becoming ever more important for everyone's life. Cloud storage? Web mails? Yes, we don't need to be working in big IT companies to be surrounded by cloud services. Another thing that's growing in importance, or at least that should be considered ever more important, is the concept of privacy. The more we rely on services of which we know close to nothing about, the more we should be worried about our privacy. In this work, I will analyze a prototype software based on a peer to peer architecture for the offering of cloud services, to see if it's possible to make it completely anonymous, meaning that not only the users using it will be anonymous, but also the Peers composing it will not know the real identity of each others. To make it possible, I will make use of anonymizing networks like Tor. I will start by studying the state of art of Cloud Computing, by looking at some real example, followed by analyzing the architecture of the prototype, trying to expose the differences between its distributed nature and the somehow centralized solutions offered by the famous vendors. After that, I will get as deep as possible into the working principle of the anonymizing networks, because they are not something that can just be 'applied' mindlessly. Some de-anonymizing techniques are very subtle so things must be studied carefully. I will then implement the required changes, and test the new anonymized prototype to see how its performances differ from those of the standard one. The prototype will be run on many machines, orchestrated by a tester script that will automatically start, stop and do all the required API calls. As to where to find all these machines, I will make use of Amazon EC2 cloud services and their on-demand instances.

Dynamics of inorganic carbon and carbonate saturation in the Gulf of Cádiz (SW Spain)

The study of inorganic carbon chemistry of the coastal ocean is conducted in the Gulf of Cádiz (GoC). Here we describe observations obtained during 4 sampling cruises in March, June, September and November 2015. The primary data set consists of state-of-the-art measurements of the keystone parameters of the marine CO2 system: Total Alkalinity (TA), pH, dissolved inorganic carbon (DIC). We have then calculated aragonite and calcite saturation state. The distribution of inorganic carbon system parameters in the north eastern shelf of the Gulf of Cádiz showed temporal and spatial variability. River input, mixing, primary production, respiration and remineralization were factors that controlled such distributions. Data related to carbonate saturation of calcite and aragonite reveal the occurrence of a supersaturated water; in any case, both species increased with distance and decreased with depth. The carbon system parameters present a different behaviour close to the coast to offshore ad at deeper water. In this area six water masses are clearly identified by their different chemical properties: Surface Atlantic Water, North Atlantic Central Water (NACW) and Mediterranean Water (MOW). Moreover, with this work the measurement of calcium in seawater is optimize, allowing a better quantification for future work of the saturation state of CaCO3.

Problem of Tragedy and Tragic Consciousness in Russia at the turn of the 19th Century

This project intertwines philosophical and historico-literary themes, taking as its starting point the concept of tragic consciousness inherent in the epoch of classicism. The research work makes use of ontological categories in order to describe the underlying principles of the image of the world which was created in philosophical and scientific theories of the 17th century as well as in contemporary drama. Using these categories brought Mr. Vilk to the conclusion that the classical picture of the world implied a certain dualism; not the Manichaean division between light and darkness but the discrimination between nature and absolute being, i.e. God. Mr. Vilk begins with an examination of the philosophical essence of French classical theatre of the XVII and XVIII centuries. The history of French classical tragedy can be divided into three periods: from the mid 17th to early 19th centuries when it triumphed all over France and exerted a powerful influence over almost all European countries; followed by the period of its rejection by the Romantics, who declared classicism to be "artificial and rational"; and finally our own century which has taken a more moderate line. Nevertheless, French classical tragedy has never fully recovered its status. Instead, it is ancient tragedy and the works of Shakespeare that are regarded to be the most adequate embodiment of the tragic. Consequently they still provoke a great number of new interpretations ranging from specialised literary criticism to more philosophical rumination. An important feature of classical tragedy is a system of rules and unities which reveals a hidden ontological structure of the world. The ontological picture of the dramatic world can be described in categories worked out by medieval philosophy - being, essence and existence. The first category is to be understood as a tendency toward permanency and stability (within eternity) connected with this or that fragment of dramatic reality. The second implies a certain set of permanent elements that make up the reality. And the third - existence - should be understood as "an act of being", as a realisation of permanently renewed processes of life. All of these categories can be found in every artistic reality but the accents put on one or another and their interrelations create different ontological perspectives. Mr. Vilk plots the movement of thought, expressed in both philosophical and scientific discourses, away from Aristotle's essential forms, and towards a prioritising of existence, and shows how new forms of literature and drama structured the world according to these evolving requirements. At the same time the world created in classical tragedy fully preserves another ontological paradigm - being - as a fundamental permanence. As far as the tragic hero's motivations are concerned this paradigm is revealed in the dedication of his whole self to some cause, and his oath of fidelity, attitudes which shape his behaviour. It may be the idea of the State, or personal honour, or something borrowed from the emotional sphere, passionate love. Mr. Vilk views the conflicting ambivalence of existence and being, duty as responsibility and duty as fidelity, as underlying the main conflict of classical tragedy of the 17th century. Having plotted the movement of the being/existence duality through its manifestations in 17th century tragedy, Mr. Vilk moves to the 18th century, when tragedy took a philosophical turn. A dualistic view of the world became supplanted by the Enlightenment idea of a natural law, rooted in nature. The main point of tragedy now was to reveal that such conflicts as might take place had an anti-rational nature, that they arose as the result of a kind of superstition caused by social reasons. These themes Mr. Vilk now pursues through Russian dramatists of the 18th and early 19th centuries. He begins with Sumarakov, whose philosophical thought has a religious bias. According to Sumarakov, the dualism of the divineness and naturalness of man is on the one hand an eternal paradox, and on the other, a moral challenge for humans to try to unite the two opposites. His early tragedies are not concerned with social evils or the triumph of natural feelings and human reason, but rather the tragic disharmony in the nature of man and the world. Mr Vilk turns next to the work of Kniazhnin. He is particularly keen to rescue his reputation from the judgements of critics who accuse him of being imitative, and in order to do so, analyses in detail the tragedy "Dido", in which Kniazhnin makes an attempt to revive the image of great heroes and city-founders. Aeneas represents the idea of the "being" of Troy, his destiny is the re-establishment of the city (the future Rome). The moral aspect behind this idea is faithfulness, he devotes himself to Gods. Dido is also the creator of a city, endowed with "natural powers" and abilities, but her creation is lacking internal stability grounded in "being". The unity of the two motives is only achieved through Dido's sacrifice of herself and her city to Aeneus. Mr Vilk's next subject is Kheraskov, whose peculiarity lies in the influence of free-mason mysticism on his work. This section deals with one of the most important philosophical assumptions contained in contemporary free-mason literature of the time - the idea of the trinitarian hierarchy inherent in man and the world: body - soul - spirit, and nature - law - grace. Finally, Mr. Vilk assess the work of Ozerov, the last major Russian tragedian. The tragedies which earned him fame, "Oedipus in Athens", "Fingal" and "Dmitri Donskoi", present a compromise between the Enlightenment's emphasis on harmony and ontological tragic conflict. But it is in "Polixene" that a real meeting of the Russian tradition with the age-old history of the genre takes place. The male and female characters of "Polixene" distinctly express the elements of "being" and "existence". Each of the participants of the conflict possesses some dominant characteristic personifying a certain indispensable part of the moral world, a certain "virtue". But their independent efforts are unable to overcome the ontological gap separating them. The end of the tragedy - Polixene's sacrificial self-immolation - paradoxically combines the glorification of each party involved in the conflict, and their condemnation. The final part of Mr. Vilk's research deals with the influence of "Polixene" upon subsequent dramatic art. In this respect Katenin's "Andromacha", inspired by "Polixene", is important to mention. In "Andromacha" a decisive divergence from the principles of the philosophical tragedy of Russian classicism and the ontology of classicism occurs: a new character appears as an independent personality, directed by his private interest. It was Katenin who was to become the intermediary between Pushkin and classical tragedy.

Semiotic Analysis in the Study of Social Work

Research and professional practices have the joint aim of re-structuring the preconceived notions of reality. They both want to gain the understanding about social reality. Social workers use their professional competence in order to grasp the reality of their clients, while researchers’ pursuit is to open the secrecies of the research material. Development and research are now so intertwined and inherent in almost all professional practices that making distinctions between practising, developing and researching has become difficult and in many aspects irrelevant. Moving towards research-based practices is possible and it is easily applied within the framework of the qualitative research approach (Dominelli 2005, 235; Humphries 2005, 280). Social work can be understood as acts and speech acts crisscrossing between social workers and clients. When trying to catch the verbal and non-verbal hints of each others’ behaviour, the actors have to do a lot of interpretations in a more or less uncertain mental landscape. Our point of departure is the idea that the study of social work practices requires tools which effectively reveal the internal complexity of social work (see, for example, Adams & Dominelli & Payne 2005, 294 – 295). The boom of qualitative research methodologies in recent decades is associated with much profound the rupture in humanities, which is called the linguistic turn (Rorty 1967). The idea that language is not transparently mediating our perceptions and thoughts about reality, but on the contrary it constitutes it was new and even confusing to many social scientists. Nowadays we have got used to read research reports which have applied different branches of discursive analyses or narratologic or semiotic approaches. Although differences are sophisticated between those orientations they share the idea of the predominance of language. Despite the lively research work of today’s social work and the research-minded atmosphere of social work practice, semiotics has rarely applied in social work research. However, social work as a communicative practice concerns symbols, metaphors and all kinds of the representative structures of language. Those items are at the core of semiotics, the science of signs, and the science which examines people using signs in their mutual interaction and their endeavours to make the sense of the world they live in, their semiosis. When thinking of the practice of social work and doing the research of it, a number of interpretational levels ought to be passed before reaching the research phase in social work. First of all, social workers have to interpret their clients’ situations, which will be recorded in the files. In some very rare cases those past situations will be reflected in discussions or perhaps interviews or put under the scrutiny of some researcher in the future. Each and every new observation adds its own flavour to the mixture of meanings. Social workers have combined their observations with previous experience and professional knowledge, furthermore, the situation on hand also influences the reactions. In addition, the interpretations made by social workers over the course of their daily working routines are never limited to being part of the personal process of the social worker, but are also always inherently cultural. The work aiming at social change is defined by the presence of an initial situation, a specific goal, and the means and ways of achieving it, which are – or which should be – agreed upon by the social worker and the client in situation which is unique and at the same time socially-driven. Because of the inherent plot-based nature of social work, the practices related to it can be analysed as stories (see Dominelli 2005, 234), given, of course, that they are signifying and told by someone. The research of the practices is concentrating on impressions, perceptions, judgements, accounts, documents etc. All these multifarious elements can be scrutinized as textual corpora, but not whatever textual material. In semiotic analysis, the material studied is characterised as verbal or textual and loaded with meanings. We present a contribution of research methodology, semiotic analysis, which has to our mind at least implicitly references to the social work practices. Our examples of semiotic interpretation have been picked up from our dissertations (Laine 2005; Saurama 2002). The data are official documents from the archives of a child welfare agency and transcriptions of the interviews of shelter employees. These data can be defined as stories told by the social workers of what they have seen and felt. The official documents present only fragmentations and they are often written in passive form. (Saurama 2002, 70.) The interviews carried out in the shelters can be described as stories where the narrators are more familiar and known. The material is characterised by the interaction between the interviewer and interviewee. The levels of the story and the telling of the story become apparent when interviews or documents are examined with the use of semiotic tools. The roots of semiotic interpretation can be found in three different branches; the American pragmatism, Saussurean linguistics in Paris and the so called formalism in Moscow and Tartu; however in this paper we are engaged with the so called Parisian School of semiology which prominent figure was A. J. Greimas. The Finnish sociologists Pekka Sulkunen and Jukka Törrönen (1997a; 1997b) have further developed the ideas of Greimas in their studies on socio-semiotics, and we lean on their ideas. In semiotics social reality is conceived as a relationship between subjects, observations, and interpretations and it is seen mediated by natural language which is the most common sign system among human beings (Mounin 1985; de Saussure 2006; Sebeok 1986). Signification is an act of associating an abstract context (signified) to some physical instrument (signifier). These two elements together form the basic concept, the “sign”, which never constitutes any kind of meaning alone. The meaning will be comprised in a distinction process where signs are being related to other signs. In this chain of signs, the meaning becomes diverged from reality. (Greimas 1980, 28; Potter 1996, 70; de Saussure 2006, 46-48.) One interpretative tool is to think of speech as a surface under which deep structures – i.e. values and norms – exist (Greimas & Courtes 1982; Greimas 1987). To our mind semiotics is very much about playing with two different levels of text: the syntagmatic surface which is more or less faithful to the grammar, and the paradigmatic, semantic structure of values and norms hidden in the deeper meanings of interpretations. Semiotic analysis deals precisely with the level of meaning which exists under the surface, but the only way to reach those meanings is through the textual level, the written or spoken text. That is why the tools are needed. In our studies, we have used the semiotic square and the actant analysis. The former is based on the distinctions and the categorisations of meanings, and the latter on opening the plotting of narratives in order to reach the value structures.

Tracing of patients lost to follow-up and HIV transmission: Mathematical modelling study based on two large ART programmes in Malawi

OBJECTIVES: Treatment as prevention depends on retaining HIV-infected patients in care. We investigated the effect on HIV transmission of bringing patients lost to follow up (LTFU) back into care. DESIGN: Mathematical model. METHODS: Stochastic mathematical model of cohorts of 1000 HIV-infected patients on antiretroviral therapy (ART), based on data from two clinics in Lilongwe, Malawi. We calculated cohort viral load (CVL; sum of individual mean viral loads each year) and used a mathematical relationship between viral load and transmission probability to estimate the number of new HIV infections. We simulated four scenarios: 'no LTFU' (all patients stay in care); 'no tracing' (patients LTFU are not traced); 'immediate tracing' (after missed clinic appointment); and, 'delayed tracing' (after six months). RESULTS: About 440 of 1000 patients were LTFU over five years. CVL (million copies/ml per 1000 patients) were 3.7 (95% prediction interval [PrI] 2.9-4.9) for no LTFU, 8.6 (95% PrI 7.3-10.0) for no tracing, 7.7 (95% PrI 6.2-9.1) for immediate, and 8.0 (95% PrI 6.7-9.5) for delayed tracing. Comparing no LTFU with no tracing the number of new infections increased from 33 (95% PrI 29-38) to 54 (95% PrI 47-60) per 1000 patients. Immediate tracing prevented 3.6 (95% PrI -3.3-12.8) and delayed tracing 2.5 (95% PrI -5.8-11.1) new infections per 1000. Immediate tracing was more efficient than delayed tracing: 116 and to 142 tracing efforts, respectively, were needed to prevent one new infection. CONCLUSION: Tracing of patients LTFU enhances the preventive effect of ART, but the number of transmissions prevented is small.

Low-frequency drug-resistant HIV-1 and risk of virological failure to first-line NNRTI-based ART: a multicohort European case-control study using centralized ultrasensitive 454 pyrosequencing.

OBJECTIVES It is still debated if pre-existing minority drug-resistant HIV-1 variants (MVs) affect the virological outcomes of first-line NNRTI-containing ART. METHODS This Europe-wide case-control study included ART-naive subjects infected with drug-susceptible HIV-1 as revealed by population sequencing, who achieved virological suppression on first-line ART including one NNRTI. Cases experienced virological failure and controls were subjects from the same cohort whose viraemia remained suppressed at a matched time since initiation of ART. Blinded, centralized 454 pyrosequencing with parallel bioinformatic analysis in two laboratories was used to identify MVs in the 1%-25% frequency range. ORs of virological failure according to MV detection were estimated by logistic regression. RESULTS Two hundred and sixty samples (76 cases and 184 controls), mostly subtype B (73.5%), were used for the analysis. Identical MVs were detected in the two laboratories. 31.6% of cases and 16.8% of controls harboured pre-existing MVs. Detection of at least one MV versus no MVs was associated with an increased risk of virological failure (OR = 2.75, 95% CI = 1.35-5.60, P = 0.005); similar associations were observed for at least one MV versus no NRTI MVs (OR = 2.27, 95% CI = 0.76-6.77, P = 0.140) and at least one MV versus no NNRTI MVs (OR = 2.41, 95% CI = 1.12-5.18, P = 0.024). A dose-effect relationship between virological failure and mutational load was found. CONCLUSIONS Pre-existing MVs more than double the risk of virological failure to first-line NNRTI-based ART.

Cost-effectiveness of peer role play and standardized patients in undergraduate communication training.

BACKGROUND The few studies directly comparing the methodological approach of peer role play (RP) and standardized patients (SP) for the delivery of communication skills all suggest that both methods are effective. In this study we calculated the costs of both methods (given comparable outcomes) and are the first to generate a differential cost-effectiveness analysis of both methods. METHODS Medical students in their prefinal year were randomly assigned to one of two groups receiving communication training in Pediatrics either with RP (N = 34) or 19 individually trained SP (N = 35). In an OSCE with standardized patients using the Calgary-Cambridge Referenced Observation Guide both groups achieved comparable high scores (results published). In this study, corresponding costs were assessed as man-hours resulting from hours of work of SP and tutors. A cost-effectiveness analysis was performed. RESULTS Cost-effectiveness analysis revealed a major advantage for RP as compared to SP (112 vs. 172 man hours; cost effectiveness ratio .74 vs. .45) at comparable performance levels after training with both methods. CONCLUSIONS While both peer role play and training with standardized patients have their value in medical curricula, RP has a major advantage in terms of cost-effectiveness. This could be taken into account in future decisions.

Collecting the Painted Netherlands: The Art Collection of Ernest of Austria in Brussels

The (art) collection of Archduke Ernest of Austria (1553-1595) is widely unknown when it comes to early-modern Habsburg collections. Ernest, younger brother of Emperor Rudolf II (b. 1552) and educated at the Madrid court, was appointed Governor-General of the Netherlands by King Philip II of Spain, his uncle, in summer 1593. Ernest relocated his court from Vienna to Brussels in early 1594 and was welcomed there with lavish festivities: the traditional Blijde Inkomst, Joyous Entry, of the new sovereign. Unfortunately, the archduke died in February 1595 after residing in Brussels for a mere thirteen months. This investigation aims to shed new light on the archduke and his short-lived collecting ambitions in the Low Countries, taking into account that he had the mercantile and artistic metropolis Antwerp in his immediate reach. I argue, that his collecting ambitions can be traced back to one specific occasion: Ernest’s Joyous Entry into Antwerp in June 1594. There the archduke received a series of six paintings of Pieter Bruegel the Elder (1525/30-1569) known as The Months (painted in 1565), hanging today in separate locations in Vienna, New York and Prague. These works of art triggered Ernest’s collecting ambitions and prompted him to focus mainly on works of art and artefacts manufactured at or traded within the Netherlands during the last eight months of his lifetime. Additionally, it will be shown that the archduke was inspired by the paintings’ motifs and therefore concentrated on acquiring works of art depicting nature and landscape scenes from the 1560s and 1590s. On the basis of the archduke’s recently published account book (Kassabuch) and of the partially published inventory of his belongings, it becomes clear that Ernest of Austria must be seen in line with the better-known Habsburg collectors and that his specific collection of “the painted Netherlands” can be linked directly to his self-fashioning as a rightful sovereign of the Low Countries.

Contribution to the Analysis, Design and Assessment of Compact Antenna Test Ranges At Millimeter Wavelengths - Contribución al Análisis, Diseño y Caracterización de Sistemas de Medida de Antenas en Rango Compacto para Frecuencias Milimétricas

This Doctoral Thesis entitled Contribution to the analysis, design and assessment of compact antenna test ranges at millimeter wavelengths aims to deepen the knowledge of a particular antenna measurement system: the compact range, operating in the frequency bands of millimeter wavelengths. The thesis has been developed at Radiation Group (GR), an antenna laboratory which belongs to the Signals, Systems and Radiocommunications department (SSR), from Technical University of Madrid (UPM). The Radiation Group owns an extensive experience on antenna measurements, running at present four facilities which operate in different configurations: Gregorian compact antenna test range, spherical near field, planar near field and semianechoic arch system. The research work performed in line with this thesis contributes the knowledge of the first measurement configuration at higher frequencies, beyond the microwaves region where Radiation Group features customer-level performance. To reach this high level purpose, a set of scientific tasks were sequentially carried out. Those are succinctly described in the subsequent paragraphs. A first step dealed with the State of Art review. The study of scientific literature dealed with the analysis of measurement practices in compact antenna test ranges in addition with the particularities of millimeter wavelength technologies. Joint study of both fields of knowledge converged, when this measurement facilities are of interest, in a series of technological challenges which become serious bottlenecks at different stages: analysis, design and assessment. Thirdly after the overview study, focus was set on Electromagnetic analysis algorithms. These formulations allow to approach certain electromagnetic features of interest, such as field distribution phase or stray signal analysis of particular structures when they interact with electromagnetic waves sources. Properly operated, a CATR facility features electromagnetic waves collimation optics which are large, in terms of wavelengths. Accordingly, the electromagnetic analysis tasks introduce an extense number of mathematic unknowns which grow with frequency, following different polynomic order laws depending on the used algorithmia. In particular, the optics configuration which was of our interest consisted on the reflection type serrated edge collimator. The analysis of these devices requires a flexible handling of almost arbitrary scattering geometries, becoming this flexibility the nucleus of the algorithmia’s ability to perform the subsequent design tasks. This thesis’ contribution to this field of knowledge consisted on reaching a formulation which was powerful at the same time when dealing with various analysis geometries and computationally speaking. Two algorithmia were developed. While based on the same principle of hybridization, they reached different order Physics performance at the cost of the computational efficiency. Inter-comparison of their CATR design capabilities was performed, reaching both qualitative as well as quantitative conclusions on their scope. In third place, interest was shifted from analysis - design tasks towards range assessment. Millimetre wavelengths imply strict mechanical tolerances and fine setup adjustment. In addition, the large number of unknowns issue already faced in the analysis stage appears as well in the on chamber field probing stage. Natural decrease of dynamic range available by semiconductor millimeter waves sources requires in addition larger integration times at each probing point. These peculiarities increase exponentially the difficulty of performing assessment processes in CATR facilities beyond microwaves. The bottleneck becomes so tight that it compromises the range characterization beyond a certain limit frequency which typically lies on the lowest segment of millimeter wavelength frequencies. However the value of range assessment moves, on the contrary, towards the highest segment. This thesis contributes this technological scenario developing quiet zone probing techniques which achieves substantial data reduction ratii. Collaterally, it increases the robustness of the results to noise, which is a virtual rise of the setup’s available dynamic range. In fourth place, the environmental sensitivity of millimeter wavelengths issue was approached. It is well known the drifts of electromagnetic experiments due to the dependance of the re sults with respect to the surrounding environment. This feature relegates many industrial practices of microwave frequencies to the experimental stage, at millimeter wavelengths. In particular, evolution of the atmosphere within acceptable conditioning bounds redounds in drift phenomena which completely mask the experimental results. The contribution of this thesis on this aspect consists on modeling electrically the indoor atmosphere existing in a CATR, as a function of environmental variables which affect the range’s performance. A simple model was developed, being able to handle high level phenomena, such as feed - probe phase drift as a function of low level magnitudes easy to be sampled: relative humidity and temperature. With this model, environmental compensation can be performed and chamber conditioning is automatically extended towards higher frequencies. Therefore, the purpose of this thesis is to go further into the knowledge of millimetre wavelengths involving compact antenna test ranges. This knowledge is dosified through the sequential stages of a CATR conception, form early low level electromagnetic analysis towards the assessment of an operative facility, stages for each one of which nowadays bottleneck phenomena exist and seriously compromise the antenna measurement practices at millimeter wavelengths.

Assessment of work performed by paired students: a pedagogical experience

“Teamwork” is one of the abilities most valued by employers. In [16] we describe the process of adapting to the ECTS methodologies (for ongoing assessment), a course in computer programming for students in a technical degree (Marine Engineering, UPM) not specifically dedicated to computing. As a further step in this process we have emphasized cooperative learning. For this, the students were paired and the work of each pair was evaluated via surprise tests taken and graded jointly, and constituting a substantial part of the final grade. Here we document this experience, discussing methodological aspects, describing indicators for measuring the impact of these methodologies on the educational experience, and reporting on the students’ opinion of it.

Contribution to the quality improvement of the antenna measurement using post-processing techniques = Contribución a la mejora de la calidad de medida de antena usando técnicas de post-procesado

One important task in the design of an antenna is to carry out an analysis to find out the characteristics of the antenna that best fulfills the specifications fixed by the application. After that, a prototype is manufactured and the next stage in design process is to check if the radiation pattern differs from the designed one. Besides the radiation pattern, other radiation parameters like directivity, gain, impedance, beamwidth, efficiency, polarization, etc. must be also evaluated. For this purpose, accurate antenna measurement techniques are needed in order to know exactly the actual electromagnetic behavior of the antenna under test. Due to this fact, most of the measurements are performed in anechoic chambers, which are closed areas, normally shielded, covered by electromagnetic absorbing material, that simulate free space propagation conditions, due to the absorption of the radiation absorbing material. Moreover, these facilities can be employed independently of the weather conditions and allow measurements free from interferences. Despite all the advantages of the anechoic chambers, the results obtained both from far-field measurements and near-field measurements are inevitably affected by errors. Thus, the main objective of this Thesis is to propose algorithms to improve the quality of the results obtained in antenna measurements by using post-processing techniques and without requiring additional measurements. First, a deep revision work of the state of the art has been made in order to give a general vision of the possibilities to characterize or to reduce the effects of errors in antenna measurements. Later, new methods to reduce the unwanted effects of four of the most commons errors in antenna measurements are described and theoretical and numerically validated. The basis of all them is the same, to perform a transformation from the measurement surface to another domain where there is enough information to easily remove the contribution of the errors. The four errors analyzed are noise, reflections, truncation errors and leakage and the tools used to suppress them are mainly source reconstruction techniques, spatial and modal filtering and iterative algorithms to extrapolate functions. Therefore, the main idea of all the methods is to modify the classical near-field-to-far-field transformations by including additional steps with which errors can be greatly suppressed. Moreover, the proposed methods are not computationally complex and, because they are applied in post-processing, additional measurements are not required. The noise is the most widely studied error in this Thesis, proposing a total of three alternatives to filter out an important noise contribution before obtaining the far-field pattern. The first one is based on a modal filtering. The second alternative uses a source reconstruction technique to obtain the extreme near-field where it is possible to apply a spatial filtering. The last one is to back-propagate the measured field to a surface with the same geometry than the measurement surface but closer to the AUT and then to apply also a spatial filtering. All the alternatives are analyzed in the three most common near-field systems, including comprehensive noise statistical analyses in order to deduce the signal-to-noise ratio improvement achieved in each case. The method to suppress reflections in antenna measurements is also based on a source reconstruction technique and the main idea is to reconstruct the field over a surface larger than the antenna aperture in order to be able to identify and later suppress the virtual sources related to the reflective waves. The truncation error presents in the results obtained from planar, cylindrical and partial spherical near-field measurements is the third error analyzed in this Thesis. The method to reduce this error is based on an iterative algorithm to extrapolate the reliable region of the far-field pattern from the knowledge of the field distribution on the AUT plane. The proper termination point of this iterative algorithm as well as other critical aspects of the method are also studied. The last part of this work is dedicated to the detection and suppression of the two most common leakage sources in antenna measurements. A first method tries to estimate the leakage bias constant added by the receiver’s quadrature detector to every near-field data and then suppress its effect on the far-field pattern. The second method can be divided into two parts; the first one to find the position of the faulty component that radiates or receives unwanted radiation, making easier its identification within the measurement environment and its later substitution; and the second part of this method is able to computationally remove the leakage effect without requiring the substitution of the faulty component. Resumen Una tarea importante en el diseño de una antena es llevar a cabo un análisis para averiguar las características de la antena que mejor cumple las especificaciones fijadas por la aplicación. Después de esto, se fabrica un prototipo de la antena y el siguiente paso en el proceso de diseño es comprobar si el patrón de radiación difiere del diseñado. Además del patrón de radiación, otros parámetros de radiación como la directividad, la ganancia, impedancia, ancho de haz, eficiencia, polarización, etc. deben ser también evaluados. Para lograr este propósito, se necesitan técnicas de medida de antenas muy precisas con el fin de saber exactamente el comportamiento electromagnético real de la antena bajo prueba. Debido a esto, la mayoría de las medidas se realizan en cámaras anecoicas, que son áreas cerradas, normalmente revestidas, cubiertas con material absorbente electromagnético. Además, estas instalaciones se pueden emplear independientemente de las condiciones climatológicas y permiten realizar medidas libres de interferencias. A pesar de todas las ventajas de las cámaras anecoicas, los resultados obtenidos tanto en medidas en campo lejano como en medidas en campo próximo están inevitablemente afectados por errores. Así, el principal objetivo de esta Tesis es proponer algoritmos para mejorar la calidad de los resultados obtenidos en medida de antenas mediante el uso de técnicas de post-procesado. Primeramente, se ha realizado un profundo trabajo de revisión del estado del arte con el fin de dar una visión general de las posibilidades para caracterizar o reducir los efectos de errores en medida de antenas. Después, se han descrito y validado tanto teórica como numéricamente nuevos métodos para reducir el efecto indeseado de cuatro de los errores más comunes en medida de antenas. La base de todos ellos es la misma, realizar una transformación de la superficie de medida a otro dominio donde hay suficiente información para eliminar fácilmente la contribución de los errores. Los cuatro errores analizados son ruido, reflexiones, errores de truncamiento y leakage y las herramientas usadas para suprimirlos son principalmente técnicas de reconstrucción de fuentes, filtrado espacial y modal y algoritmos iterativos para extrapolar funciones. Por lo tanto, la principal idea de todos los métodos es modificar las transformaciones clásicas de campo cercano a campo lejano incluyendo pasos adicionales con los que los errores pueden ser enormemente suprimidos. Además, los métodos propuestos no son computacionalmente complejos y dado que se aplican en post-procesado, no se necesitan medidas adicionales. El ruido es el error más ampliamente estudiado en esta Tesis, proponiéndose un total de tres alternativas para filtrar una importante contribución de ruido antes de obtener el patrón de campo lejano. La primera está basada en un filtrado modal. La segunda alternativa usa una técnica de reconstrucción de fuentes para obtener el campo sobre el plano de la antena donde es posible aplicar un filtrado espacial. La última es propagar el campo medido a una superficie con la misma geometría que la superficie de medida pero más próxima a la antena y luego aplicar también un filtrado espacial. Todas las alternativas han sido analizadas en los sistemas de campo próximos más comunes, incluyendo detallados análisis estadísticos del ruido con el fin de deducir la mejora de la relación señal a ruido lograda en cada caso. El método para suprimir reflexiones en medida de antenas está también basado en una técnica de reconstrucción de fuentes y la principal idea es reconstruir el campo sobre una superficie mayor que la apertura de la antena con el fin de ser capaces de identificar y después suprimir fuentes virtuales relacionadas con las ondas reflejadas. El error de truncamiento que aparece en los resultados obtenidos a partir de medidas en un plano, cilindro o en la porción de una esfera es el tercer error analizado en esta Tesis. El método para reducir este error está basado en un algoritmo iterativo para extrapolar la región fiable del patrón de campo lejano a partir de información de la distribución del campo sobre el plano de la antena. Además, se ha estudiado el punto apropiado de terminación de este algoritmo iterativo así como otros aspectos críticos del método. La última parte de este trabajo está dedicado a la detección y supresión de dos de las fuentes de leakage más comunes en medida de antenas. El primer método intenta realizar una estimación de la constante de fuga del leakage añadido por el detector en cuadratura del receptor a todos los datos en campo próximo y después suprimir su efecto en el patrón de campo lejano. El segundo método se puede dividir en dos partes; la primera de ellas para encontrar la posición de elementos defectuosos que radian o reciben radiación indeseada, haciendo más fácil su identificación dentro del entorno de medida y su posterior substitución. La segunda parte del método es capaz de eliminar computacionalmente el efector del leakage sin necesidad de la substitución del elemento defectuoso.

Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder

Con esta tesis ”Desarrollo de una Teoría Uniforme de la Difracción para el Análisis de los Campos Electromagnéticos Dispersados y Superficiales sobre un Cilindro” hemos iniciado una nueva línea de investigación que trata de responder a la siguiente pregunta: ¿cuál es la impedancia de superficie que describe una estructura de conductor eléctrico perfecto (PEC) convexa recubierta por un material no conductor? Este tipo de estudios tienen interés hoy en día porque ayudan a predecir el campo electromagnético incidente, radiado o que se propaga sobre estructuras metálicas y localmente convexas que se encuentran recubiertas de algún material dieléctrico, o sobre estructuras metálicas con pérdidas, como por ejemplo se necesita en determinadas aplicaciones aeroespaciales, marítimas o automovilísticas. Además, desde un punto de vista teórico, la caracterización de la impedancia de superficie de una estructura PEC recubierta o no por un dieléctrico es una generalización de varias soluciones que tratan ambos tipos de problemas por separado. En esta tesis se desarrolla una teoría uniforme de la difracción (UTD) para analizar el problema canónico del campo electromagnético dispersado y superficial en un cilindro circular eléctricamente grande con una condición de contorno de impedancia (IBC) para frecuencias altas. Construir una solución basada en UTD para este problema canónico es crucial en el desarrollo de un método UTD para el caso más general de una superficie arbitrariamente convexa, mediante el uso del principio de localización de los campos electromagnéticos a altas frecuencias. Esta tesis doctoral se ha llevado a cabo a través de una serie de hitos que se enumeran a continuación, enfatizando las contribuciones a las que ha dado lugar. Inicialmente se realiza una revisión en profundidad del estado del arte de los métodos asintóticos con numerosas referencias. As í, cualquier lector novel puede llegar a conocer la historia de la óptica geométrica (GO) y la teoría geométrica de la difracción (GTD), que dieron lugar al desarrollo de la UTD. Después, se investiga ampliamente la UTD y los trabajos más importantes que pueden encontrarse en la literatura. As í, este capítulo, nos coloca en la posición de afirmar que, hasta donde nosotros conocemos, nadie ha intentado antes llevar a cabo una investigación rigurosa sobre la caracterización de la impedancia de superficie de una estructura PEC recubierta por un material dieléctrico, utilizando para ello la UTD. Primero, se desarrolla una UTD para el problema canónico de la dispersión electromagnética de un cilindro circular eléctricamente grande con una IBC uniforme, cuando es iluminado por una onda plana con incidencia oblicua a frecuencias altas. La solución a este problema canónico se construye a partir de una solución exacta mediante una expansión de autofunciones de propagación radial. Entonces, ésta se convierte en una nueva expansión de autofunciones de propagación circunferencial muy apropiada para cilindros grandes, a través de la transformación de Watson. De esta forma, la expresión del campo se reduce a una integral que se evalúa asintóticamente, para altas frecuencias, de manera uniforme. El resultado se expresa según el trazado de rayos descrito en la UTD. La solución es uniforme porque tiene la importante propiedad de mantenerse continua a lo largo de la región de transición, a ambos lados de la superficie del contorno de sombra. Fuera de la región de transición la solución se reduce al campo incidente y reflejado puramente ópticos en la región iluminada del cilindro, y al campo superficial difractado en la región de sombra. Debido a la IBC el campo dispersado contiene una componente contrapolar a causa de un acoplamiento entre las ondas TEz y TMz (donde z es el eje del cilindro). Esta componente contrapolar desaparece cuando la incidencia es normal al cilindro, y también en la región iluminada cuando la incidencia es oblicua donde el campo se reduce a la solución de GO. La solución UTD presenta una muy buena exactitud cuando se compara numéricamente con una solución de referencia exacta. A continuación, se desarrolla una IBC efectiva para el cálculo del campo electromagnético dispersado en un cilindro circular PEC recubierto por un dieléctrico e iluminado por una onda plana incidiendo oblicuamente. Para ello se derivan dos impedancias de superficie en relación directa con las ondas creeping y de superficie TM y TE que se excitan en un cilindro recubierto por un material no conductor. Las impedancias de superficie TM y TE están acopladas cuando la incidencia es oblicua, y dependen de la geometría del problema y de los números de onda. Además, se ha derivado una impedancia de superficie constante, aunque con diferente valor cuando el observador se encuentra en la zona iluminada o en la zona de sombra. Después, se presenta una solución UTD para el cálculo de la dispersión de una onda plana con incidencia oblicua sobre un cilindro eléctricamente grande y convexo, mediante la generalización del problema canónico correspondiente al cilindro circular. La solución asintótica es uniforme porque se mantiene continua a lo largo de la región de transición, en las inmediaciones del contorno de sombra, y se reduce a la solución de rayos ópticos en la zona iluminada y a la contribución de las ondas de superficie dentro de la zona de sombra, lejos de la región de transición. Cuando se usa cualquier material no conductor se excita una componente contrapolar que tiende a desaparecer cuando la incidencia es normal al cilindro y en la región iluminada. Se discuten ampliamente las limitaciones de las fórmulas para la impedancia de superficie efectiva, y se compara la solución UTD con otras soluciones de referencia, donde se observa una muy buena concordancia. Y en tercer lugar, se presenta una aproximación para una impedancia de superficie efectiva para el cálculo de los campos superficiales en un cilindro circular conductor recubierto por un dieléctrico. Se discuten las principales diferencias que existen entre un cilindro PEC recubierto por un dieléctrico desde un punto de vista riguroso y un cilindro con una IBC. Mientras para un cilindro de impedancia se considera una impedancia de superficie constante o uniforme, para un cilindro conductor recubierto por un dieléctrico se derivan dos impedancias de superficie. Estas impedancias de superficie están asociadas a los modos de ondas creeping TM y TE excitadas en un cilindro, y dependen de la posición y de la orientación del observador y de la fuente. Con esto en mente, se deriva una solución UTD con IBC para los campos superficiales teniendo en cuenta las dependencias de la impedancia de superficie. La expansión asintótica se realiza, mediante la transformación de Watson, sobre la representación en serie de las funciones de Green correspondientes, evitando as í calcular las derivadas de orden superior de las integrales de tipo Fock, y dando lugar a una solución rápida y precisa. En los ejemplos numéricos realizados se observa una muy buena precisión cuando el cilindro y la separación entre el observador y la fuente son grandes. Esta solución, junto con el método de los momentos (MoM), se puede aplicar para el cálculo eficiente del acoplamiento mutuo de grandes arrays conformados de antenas de parches. Los métodos propuestos basados en UTD para el cálculo del campo electromagnético dispersado y superficial sobre un cilindro PEC recubierto de dieléctrico con una IBC efectiva suponen un primer paso hacia la generalización de una solución UTD para superficies metálicas convexas arbitrarias cubiertas por un material no conductor e iluminadas por una fuente electromagnética arbitraria. ABSTRACT With this thesis ”Development of a Uniform Theory of Diffraction for Scattered and Surface Electromagnetic Field Analysis on a Cylinder” we have initiated a line of investigation whose goal is to answer the following question: what is the surface impedance which describes a perfect electric conductor (PEC) convex structure covered by a material coating? These studies are of current and future interest for predicting the electromagnetic (EM) fields incident, radiating or propagating on locally smooth convex parts of highly metallic structures with a material coating, or by a lossy metallic surfaces, as for example in aerospace, maritime and automotive applications. Moreover, from a theoretical point of view, the surface impedance characterization of PEC surfaces with or without a material coating represents a generalization of independent solutions for both type of problems. A uniform geometrical theory of diffraction (UTD) is developed in this thesis for analyzing the canonical problem of EM scattered and surface field by an electrically large circular cylinder with an impedance boundary condition (IBC) in the high frequency regime, by means of a surface impedance characterization. The construction of a UTD solution for this canonical problem is crucial for the development of the corresponding UTD solution for the more general case of an arbitrary smooth convex surface, via the principle of the localization of high frequency EM fields. The development of the present doctoral thesis has been carried out through a series of landmarks that are enumerated as follows, emphasizing the main contributions that this work has given rise to. Initially, a profound revision is made in the state of art of asymptotic methods where numerous references are given. Thus, any reader may know the history of geometrical optics (GO) and geometrical theory of diffraction (GTD), which led to the development of UTD. Then, the UTD is deeply investigated and the main studies which are found in the literature are shown. This chapter situates us in the position to state that, as far as we know, nobody has attempted before to perform a rigorous research about the surface impedance characterization for material-coated PEC convex structures via UTD. First, a UTD solution is developed for the canonical problem of the EM scattering by an electrically large circular cylinder with a uniform IBC, when it is illuminated by an obliquely incident high frequency plane wave. A solution to this canonical problem is first constructed in terms of an exact formulation involving a radially propagating eigenfunction expansion. The latter is converted into a circumferentially propagating eigenfunction expansion suited for large cylinders, via the Watson transformation, which is expressed as an integral that is subsequently evaluated asymptotically, for high frequencies, in a uniform manner. The resulting solution is then expressed in the desired UTD ray form. This solution is uniform in the sense that it has the important property that it remains continuous across the transition region on either side of the surface shadow boundary. Outside the shadow boundary transition region it recovers the purely ray optical incident and reflected ray fields on the deep lit side of the shadow boundary and to the modal surface diffracted ray fields on the deep shadow side. The scattered field is seen to have a cross-polarized component due to the coupling between the TEz and TMz waves (where z is the cylinder axis) resulting from the IBC. Such cross-polarization vanishes for normal incidence on the cylinder, and also in the deep lit region for oblique incidence where it properly reduces to the GO or ray optical solution. This UTD solution is shown to be very accurate by a numerical comparison with an exact reference solution. Then, an effective IBC is developed for the EM scattered field on a coated PEC circular cylinder illuminated by an obliquely incident plane wave. Two surface impedances are derived in a direct relation with the TM and TE surface and creeping wave modes excited on a coated cylinder. The TM and TE surface impedances are coupled at oblique incidence, and depend on the geometry of the problem and the wave numbers. Nevertheless, a constant surface impedance is found, although with a different value when the observation point lays in the lit or in the shadow region. Then, a UTD solution for the scattering of an obliquely incident plane wave on an electrically large smooth convex coated PEC cylinder is introduced, via a generalization of the canonical circular cylinder problem. The asymptotic solution is uniform because it remains continuous across the transition region, in the vicinity of the shadow boundary, and it recovers the ray optical solution in the deep lit region and the creeping wave formulation within the deep shadow region. When a coating is present a cross-polar field term is excited, which vanishes at normal incidence and in the deep lit region. The limitations of the effective surface impedance formulas are discussed, and the UTD solution is compared with some reference solutions where a very good agreement is met. And in third place, an effective surface impedance approach is introduced for determining surface fields on an electrically large coated metallic circular cylinder. Differences in analysis of rigorouslytreated coated metallic cylinders and cylinders with an IBC are discussed. While for the impedance cylinder case a single constant or uniform surface impedance is considered, for the coated metallic cylinder case two surface impedances are derived. These are associated with the TM and TE creeping wave modes excited on a cylinder and depend on observation and source positions and orientations. With this in mind, a UTD based method with IBC is derived for the surface fields by taking into account the surface impedance variation. The asymptotic expansion is performed, via the Watson transformation, over the appropriate series representation of the Green’s functions, thus avoiding higher-order derivatives of Fock-type integrals, and yielding a fast and an accurate solution. Numerical examples reveal a very good accuracy for large cylinders when the separation between the observation and the source point is large. Thus, this solution could be efficiently applied in mutual coupling analysis, along with the method of moments (MoM), of large conformal microstrip array antennas. The proposed UTD methods for scattered and surface EM field analysis on a coated PEC cylinder with an effective IBC are considered the first steps toward the generalization of a UTD solution for large arbitrarily convex smooth metallic surfaces covered by a material coating and illuminated by an arbitrary EM source.

Bibliography of Spanish Muslim Art 1939-1946

Bibliography of Spanish Muslim Art 1939-1946