Review: "Context : A framework for its Influence on Evaluation Practice (New Directions for Evaluation No. 135)" edited by Rog, D. J.; Fitzpatrick, J. L. and Conner, R. F.

This book offers a framework for the influence of context on evaluation practice and is applied to three case studies: environmental context; indigenous context and political context; and finishes with a process for implementation.

Influence of drying conditions on the moisture diffusion and fluidization quality during multi-stage fluidized bed drying of bovine intestine for pet food

In order to establish the influence of the drying air characteristics on the drying performance and fluidization quality of bovine intestine for pet food, several drying tests have been carried out in a laboratory scale heat pump assisted fluid bed dryer. Bovine intestine samples were heat pump fluidized bed dried at atmospheric pressure and at temperatures below and above the materials freezing points, equipped with a continuous monitoring system. The investigation of the drying characteristics have been conducted in the temperature range −10 to 25 ◦C and the airflow in the range 1.5–2.5 m/s. Some experiments were conducted as single temperature drying experiments and others as two stage drying experiments employing two temperatures. An Arrhenius-type equation was used to interpret the influence of the drying air temperature on the effective diffusivity, calculated with the method of slopes in terms of energy activation, and this was found to be sensitive to the temperature. The effective diffusion coefficient of moisture transfer was determined by the Fickian method using uni-dimensional moisture movement in both moisture, removal by evaporation and combined sublimation and evaporation. Correlations expressing the effective moisture diffusivity and drying temperature are reported. Bovine particles were characterized according to the Geldart classification and the minimum fluidization velocity was calculated using the Ergun Equation and generalized equation for all drying conditions at the beginning and end of the trials. Walli’s model was used to categorize stability of the fluidization at the beginning and end of the dryingv for each trial. The determined Walli’s values were positive at the beginning and end of all trials indicating stable fluidization at the beginning and end for each drying condition.

Methodology for measuring the vertical displacements of bridges using fibre bragg grating sensors

In many bridges, vertical displacements are one of the most relevant parameters for structural health monitoring in both the short- and long-terms. Bridge managers around the globe are always looking for a simple way to measure vertical displacements of bridges. However, it is difficult to carry out such measurements. On the other hand, in recent years, with the advancement of fibre-optic technologies, fibre Bragg grating (FBG) sensors are more commonly used in structural health monitoring due to their outstanding advantages including multiplexing capability, immunity of electromagnetic interference as well as high resolution and accuracy. For these reasons, a methodology for measuring the vertical displacements of bridges using FBG sensors is proposed. The methodology includes two approaches. One of which is based on curvature measurements while the other utilises inclination measurements from successfully developed FBG tilt sensors. A series of simulation tests of a full-scale bridge was conducted. It shows that both approaches can be implemented to measure the vertical displacements for bridges with various support conditions, varying stiffness along the spans and without any prior known loading. A static loading beam test with increasing loads at the mid-span and a beam test with different loading locations were conducted to measure vertical displacements using FBG strain sensors and tilt sensors. The results show that the approaches can successfully measure vertical displacements.

Expression and prognostic influence of MMP-2, MMP-9 and TIMP-2 in non-small cell lung cancer

Background Matrix metalloproteinases (MMPs) are a family of endopeptidases that digest the extracellular matrix (ECM). Overexpression of different MMPs has been shown to promote tumour cell invasion in vitro. Tissue inhibitors of matrix metalloproteinases (TIMPs) are specific inhibitors of MMPs that also possess growth-promoting properties. Aims To analyse the expression profile of MMP-2, MMP-9 and TIMP-2 in non-small cell lung cancer (NSCLC) and to assess the impact of expression on survival. Methods This is a retrospective study of patients who underwent resection for stage I-IIIa NSCLC with a post-operative survival >60 days. Patient follow up was a minimum of 2 years. Standard ABC immunohistochemistry was performed on 4μm paraffin-embedded sections from the tumour periphery using monoclonal antibodies to MMP-2, MMP-9 and TIMP-2. Results The results of the immunohistochemistry are set out below. marker tumour expression log-rank survival stromal expression log-rank survival MMP-2 9/72 (13%) p=0.10 34/72 (47%) p=0.34 MMP-9 79/152 (52%) p=0.04* 69/152 (45%) p=0.84 TIMP-2 28/90 (31%) p=0.04* 66/90 (73%) p=0.90 Two or more 16/59 (27%) p=0.007* There were no associations between expression and clinicopathological findings for any tumour marker. There was co-expression of MMP-2 and MMP-9 in tumour cells (p=0.01). Conclusions MMP-2, MMP-9 and TIMP-2 are expressed in NSCLC. MMP-9 and TIMP-2 tumour expression correlate with a poor outcome (both p=0.04) and are potential prognostic markers for NSCLC. Cumulative expression of two or more MMPs/TIMPs may also have increased prognostic significance. Proteases and their inhibitors are novel targets for therapeutic intervention and should be evaluated in NSCLC.

Higher-order aberrations and anisometropia

Purpose/aim Myopia incidence is increasing around the world. Myopisation is considered to be caused by a variety of factors. One consideration is whether higher-order aberrations (HOA) influence myopisation. More knowledge of optics in anisometropic eyes might give further insight into the development of refractive error. Materials and methods To analyse the possible influence of HOA on refractive error development, we compared HOA between anisometropes and isometropes. We analysed HOA up to the 4th order for both eyes of 20 anisometropes (mean age: 43 ± 17 years) and 20 isometropes (mean age: 33 ±17 years). HOA were measured with the Shack-Hartman i.Profiler (Carl Zeiss, Germany) and were recalculated for a 4 mm pupil. Mean spherical equivalent (MSE) was based on the subjective refraction. Anisometropia was defined as ≥1D interocular difference in MSE. The mean absolute differences between right and left eyes in spherical equivalent were 0.28 ± 0.21 D in the isometropic group and 2.81 ± 2.04 D in the anisometropic group. Interocular differences in HOA were compared with the interocular difference in MSE using correlations. Results For isometropes oblique trefoil, vertical coma, horizontal coma and spherical aberration showed significant correlations between the two eyes. In anisometropes all analysed higher-order aberrations correlated significantly between the two eyes except oblique secondary astigmatism and secondary astigmatism. When analysing anisometropes and isometropes separately, no significant correlations were found between interocular differences of higher-order aberrations and MSE. For isometropes and anisometropes combined, tetrafoil correlated significantly with MSE in left eyes. Conclusions The present study could not show that interocular differences of higher-order aberrations increase with increasing interocular difference in MSE.

Students' academic stress and welfare as perceived by the teachers

The objective of the present study was to understand the teachers' perception about students' academic stress and other welfare related issues. A group of 125 secondary and higher secondary school teachers (43 male and 82 female) from five schools located in Kolkata were covered in the study following convenience sampling technique. Data were collected by using a semi-structured questionnaire developed by the first author. Findings revealed that more than half of the teachers (55.8% male and 54.9% female) felt that today's students are not brought up in child friendly environment while an overwhelming number of teachers stated that students face some social problems (88.4% male and 96.3% female) which affects their mental health and causes stress (90.7% male and 92.7% female). However, majority of them (79.1% male and 78% female teachers), irrespective of gender, denied the fact that teaching method followed in schools could cause academic stress. Vast majority of the teachers felt that New Education System in India i.e., making Grade X examination (popularly known as secondary examination) optional will not be beneficial for students. So far as motivation of the students is concerned, introducing innovative teaching methods like project work, field visit, using audio-visual aids in the schools has been suggested by more than 95% of the teachers. This apart, most of the teachers suggested reward system in the schools in addition to taking classes seriously by the teachers and punctuality. Reduction of load of home work was also suggested by more than two-fifth teachers. Although corporal punishment has gone down, it is still practiced by some of the teachers' especially male teachers in Kolkata. Male and female teachers differed significantly with respect to two issues only (p < .05) i.e., applying corporal punishment and impact of sexual health education. Male teachers apply more corporal punishment compared to female teachers and secondly, male teachers do not forsee any negative influence of sexual health education.

How international entrepreneurship characteristics influence Internet capabilities for the international business processes of the firm

This research explores the relationship between international entrepreneurship characteristics and the use of Internet capabilities for the international business processes of the firm. It has been suggested, that the accumulation of a firms Internet capability can assist international operations, especially when operating in fast changing dynamic Internet environments. However, international entrepreneurship characteristics which are seen as a precursor to leveraging Internet capabilities are still vague. Given this finding, eight case studies of small and medium sized travel and tourism firms were selected to investigate the influence of international entrepreneurship characteristics, and Internet capabilities for international business processes. Based on the eight in-depth case studies, the results signify that successful international entrepreneurial firms which encompass high levels of international innovativeness and proactiveness behaviour integrate Internet capabilities to a greater degree. Our findings also indicate that the prior international business experience, international risk-taking propensity and international networking characteristics are not necessarily precursors to successful integration of Internet capabilities for international business processes. On the contrary, international business experience and international networks actually lead to a reliance on traditional mechanisms of internationalisation and can dilute the development of Internet capabilities for international business processes.

The influence of perpetrator and victim intoxication on perceivers' ratings of a sexual perpetrator's own awareness of wrongdoing for his sexually aggressive behaviour

Rape-perception studies have examined the influence of alcohol intoxication on perpetrator blame attributions: However, no studies have examined how intoxication affects perceptions of a sexual perpetrator’s awareness of the wrongfulness of his behaviour despite its relevance to the conceptualisation of responsibility and blame. This experiment investigated the impact of perpetrator and victim intoxication on perceptions of a perpetrator’s own awareness of wrongdoing for acquaintance rape. Undergraduate students (N = 314) read one of four rape-scenarios in which intoxication was manipulated and rated the perpetrator’s awareness of the consequences and wrongfulness of his sexual aggression. Findings supported the hypothesis that participants would assign less awareness of wrongdoing to an intoxicated, compared to sober, perpetrator. Further, males ascribed more awareness of wrongdoing to the perpetrator of an intoxicated, compared to sober, victim. Findings indicate that intoxicated sexual perpetrators are seen as not fully aware of the nature and consequences of their crime.

Dynamic load sharing in heavy vehicle suspensions - further analysis of the equalisation effects of larger air lines

This paper provides details on comparative testing of axle-to-chassis forces of two heavy vehicles (HVs) based on an experimental programme carried out in 2007. Dynamic forces at the air springs were measured against speed and roughness values for the test roads used. One goal of that programme was to determine whether dynamic axle-to-chassis forces could be reduced by using larger-than-standard diameter longitudinal air lines. This paper presents a portion of the methodology, analysis and results from that programme. Two analytical techniques and their results are presented. The first uses correlation coefficients of the forces between air springs and the second is a student’s t-test. These were used to determine the causality surrounding improved dynamic load sharing between heavy vehicle air springs with larger air lines installed longitudinally compared with the standard sized air lines installed on the majority of air-sprung heavy vehicles.

Luxury brand identity : the influence of mobile digital technology

This thesis examined the influence of mobile digital technology on the brand identity of luxury brands. Specifically it focused on the use of mobile applications by automobile, hotel and beauty brands and compared the perceptions of marketing managers with consumers on how mobile applications influenced luxury brand identity and image. Outcomes of this research included a model to depict the ongoing process between mobile-mediated luxury brand identity and image, and a typology of luxury brand mobile applications listing key features of mobile-mediated luxemosphere. Overall findings suggest that the influence of mobile applications on luxury brand identity has been negative, as their brand image appeared to be degraded, resulting in diminishing the brand identity.

Influence of kaolinite/carbon black hybridization on combustion and thermal decomposition behaviors of NR composites

A series of NR composites filled with modified kaolinite (MK), carbon black (CB) and the hybrid fillercontained MK and CB, were prepared by melt blending. The microstructure, combustion and thermaldecomposition behaviors of NR composites were characterized by TEM, XRD, infrared spectroscopy, conecalorimeter test (CCT) and thermal-gravimetric analysis (TG). The results show that the filler hybridizationcan improve the dispensability and shape of the kaolinite sheets in the rubber matrix and change theinterface bond between kaolinite particles and rubber molecules. NR-3 filled by 10 phr MK and 40 phr CBhas the lowest heat release rate (HRR), mass loss rate (MLR), total heat release (THR), smoke productionrate (SPR) and the highest char residue among all the NR composites. Therefore, the hybridization ofthe carbon black particles with the kaolinite particles can effectively improve the thermal stability andcombustion properties of NR composites.

Local stress-strain distribution and load transfer across cartilage matrix at micro-scale using combined microscopy-based finite element method

Articular cartilage is the load-bearing tissue that consists of proteoglycan macromolecules entrapped between collagen fibrils in a three-dimensional architecture. To date, the drudgery of searching for mathematical models to represent the biomechanics of such a system continues without providing a fitting description of its functional response to load at micro-scale level. We believe that the major complication arose when cartilage was first envisaged as a multiphasic model with distinguishable components and that quantifying those and searching for the laws that govern their interaction is inadequate. To the thesis of this paper, cartilage as a bulk is as much continuum as is the response of its components to the external stimuli. For this reason, we framed the fundamental question as to what would be the mechano-structural functionality of such a system in the total absence of one of its key constituents-proteoglycans. To answer this, hydrated normal and proteoglycan depleted samples were tested under confined compression while finite element models were reproduced, for the first time, based on the structural microarchitecture of the cross-sectional profile of the matrices. These micro-porous in silico models served as virtual transducers to produce an internal noninvasive probing mechanism beyond experimental capabilities to render the matrices micromechanics and several others properties like permeability, orientation etc. The results demonstrated that load transfer was closely related to the microarchitecture of the hyperelastic models that represent solid skeleton stress and fluid response based on the state of the collagen network with and without the swollen proteoglycans. In other words, the stress gradient during deformation was a function of the structural pattern of the network and acted in concert with the position-dependent compositional state of the matrix. This reveals that the interaction between indistinguishable components in real cartilage is superimposed by its microarchitectural state which directly influences macromechanical behavior.