Computer analysis and design of concrete shell roofs

This paper is a preliminary version of Chapter 3 of a State-of-the-Art Report by the IASS Working Group 5: Concrete Shell Roofs. The intention of this chapter is to set forth for those who intend to design concrete shell roofs information and advice about the selection, verification and utilization of commercial computer tools for analysis and design tasks.The computer analysis and design steps for a concrete shell roof are described. Advice follows on the aspects to be considered in the application of commercial finite element (FE)computer programs to concrete shell analysis, starting with recommendations on how novices can gain confidence and competence in the use of software. To establish vocabulary and provide background references, brief surveys are presented of, first,element types and formulations for shells and, second, challenges presented by advanced analyses of shells. The final section of the chapter indicates what capabilities to seek in selecting commercial FE software for the analysis and design of concrete shell roofs. Brief concluding remarks summarize advice regarding judicious use of computer analysis in design practice.

Some examples of the simultaneous use of closed-form and numerical solutions in shell structural analysis

The computational advantages of the use of different approaches -numerical and analytical ones- to the analysis of different parts of the same shell structure are discussed. Examples of large size problems that can be reduced to those more suitable to be handled by a personal related axisyrometric finite elements, local unaxisymmetric shells, geometric quasi-regular shells, infinite elements and homogenization techniques are described

Ages analysis, trace elements and relative frequencies of foraminifera snd diatoms from sediment cores AvH248260-2 and AvH248260-1, Ameralik Fjord, SW Greenland

A multiproxy record including benthic foraminifera, diatoms and XRF data of a marine sediment core from a SW Greenland fjord provides a detailed reconstruction of the oceanographic and climatic variations of the region during the last 4400 cal. years. The lower part of our record represents the final termination of the Holocene Thermal Maximum. After the onset of the 'Neoglaciation' at approximately 3.2 ka cal. BP, the fjord system was subject to a number of marked hydrographical changes that were closely linked to the general climatic and oceanographic development of the Labrador Sea and the North Atlantic region. Our data show that increased advection of Atlantic water (Irminger Sea Water) from the West Greenland Current into the Labrador Sea was a typical feature of Northeast Atlantic cooling episodes such as the 'Little Ice Age' and the 'European Dark Ages', while the advection of Irminger Sea Water decreased significantly during warm episodes such as the 'Mediaeval Warm Period' and the 'Roman Warm Period'.Whereas the 'Mediaeval Warm Period' was characterized by relatively cool climate as suggested by low meltwater production, the preceding 'Dark Ages' display higher meltwater runoff and consequently warmer climate. When compared with European climate, these regional climate anomalies indicate persisting patterns of advection of colder, respectively warmer air masses in the study region during these periods and thus a long-term seesaw climate pattern between West Greenland and Europe.

Regulatory impact analysis of emission standards for elemental phosphorus plants /

"EPA 520/1-84-025."

Environmental trace materials : computer coupled radioactivation analysis /

Bibliography: p. 33-35.

Trace organic analysis : a new frontier in analytical chemistry : proceedings of the 9th Materials Research Symposium held at the National Bureau of Standards, Gaithersburg, Maryland, April 10-13, 1978 /

Includes bibliographical references and indexes.

Accuracy in trace analysis : sampling, sample handling, analysis : proceedings of the 7th Materials Research Symposium held at the National Bureau of Standards, Gaithersburg, Md., October 7-11, 1974 /

Includes bibliographical references.

Analysis of petroleum for trace elements.

"A Pergamon Press book."

Ion beam modification and analysis of metal/polymer bi-layer thin films

A set of varying-thickness Au-films were thermally evaporated onto poly(styrene-co-acrylonitrile) thin film surfaces. The Au/PSA bi-layer targets were then implanted with 50 keV N+ ions to a fluence of 1 × 1016 ions/cm2 to promote metal-to-polymer adhesion and to enhance their mechanical and electrical performance. Electrical conductivity measurements of the implanted Au/PSA thin films showed a sharp percolation behavior versus the pre-implant Au-film thickness with a percolation threshold near the nominal thickness of 44 Å. The electrical conductivity results are discussed along with the film microstructure and the elemental diffusion/mixing within the Au/PSA interface obtained by scanning electron microscopy (SEM) and ion beam analysis techniques (RBS and ERD).

Microstructure control in Sn-0.7mass%Cu alloys

Soldering alloys based oft the Sn-Cu alloy system are amongst the most favourable lead-free alternatives due to a range of attractive properties. Trace additions of Ni have been found to significantly improve the soldering characteristics of these alloys (reduced bridging etc.). This paper examines the mechanisms underlying the improvement in soldering properties of Sn-0.7 mass%Cu eutectic alloys modified with concentrations of Ni ranging front 0 to 1000 ppm. The alloys were investigated by thermal analysis during solidification, as well as optical/SEM microanalyses of fully solidified samples anti samples quenched during solidification. It is concluded that Ni additions dramatically alter the nucleation patterns and solidification behaviour of the Sn-Cu6Sn5 eutectic anti that these changes are related to the superior soldering characteristics of the Ni-modified Sn-0.7 mass%Cu alloys.

Characterisation of Chinese Tang sancai from Gongxian and Yaozhou kilns using ICP-MS trace element and TIMS Sr–Nd isotopic analysis

Tang sancai is one of the most important types of Chinese ceramics. To determine the provenance of Tang sancai is important to study ancient trade and other issues. In this paper we compare ICP-MS trace elements and TIMS Sr-Nd isotopes of visibly similar Tang sancai from two major production centres Gongxian and Yaozhou. The variation in contents/ratios of many of > 40 trace elements is small for samples from Gongxian, yet is considerably bigger for that from Yaozhou. However, the variation in Sr-87/Sr-86 and Nd-143/Nd-144 isotopic ratios is very small for samples from both places. Gongxian and Yaozhou samples have distinctive Sr-Nd isotopic and trace element features despite their similarity in major elements, and these analysis data can be interpreted with geochemistry, indicating that Sr and Nd isotopes have great potential in ceramic provenance studies. The distinct characterisation of these samples provides valuable criteria for identifying provenance of Tang sancai of uncertain origin. Two modern fakes are also analysed, and they can as well be distinguished from antique Tang sancai using above criteria. (c) 2005 Published by Elsevier Ltd.