Space density distribution of galaxies in the absolute magnitude - rotation velocity plane: a volume-complete Tully-Fisher relation from CALIFA stellar kinematics

We measured the distribution in absolute magnitude - circular velocity space for a well-defined sample of 199 rotating galaxies of the Calar Alto Legacy Integral Field Area Survey (CALIFA) using their stellar kinematics. Our aim in this analysis is to avoid subjective selection criteria and to take volume and large-scale structure factors into account. Using stellar velocity fields instead of gas emission line kinematics allows including rapidly rotating early-type galaxies. Our initial sample contains 277 galaxies with available stellar velocity fields and growth curve r-band photometry. After rejecting 51 velocity fields that could not be modelled because of the low number of bins, foreground contamination, or significant interaction, we performed Markov chain Monte Carlo modelling of the velocity fields, from which we obtained the rotation curve and kinematic parameters and their realistic uncertainties. We performed an extinction correction and calculated the circular velocity v_circ accounting for the pressure support of a given galaxy. The resulting galaxy distribution on the M-r - v(circ) plane was then modelled as a mixture of two distinct populations, allowing robust and reproducible rejection of outliers, a significant fraction of which are slow rotators. The selection effects are understood well enough that we were able to correct for the incompleteness of the sample. The 199 galaxies were weighted by volume and large-scale structure factors, which enabled us to fit a volume-corrected Tully-Fisher relation (TFR). More importantly, we also provide the volume-corrected distribution of galaxies in the M_r - v_circ plane, which can be compared with cosmological simulations. The joint distribution of the luminosity and circular velocity space densities, representative over the range of -20 > M_r > -22 mag, can place more stringent constraints on the galaxy formation and evolution scenarios than linear TFR fit parameters or the luminosity function alone.

Wavefront reconstruction from tangential and sagittal curvature

In a previous contribution [Appl. Opt. 51, 8599 (2012)], a coauthor of this work presented a method for reconstructing the wavefront aberration from tangential refractive power data measured using dynamic skiascopy. Here we propose a new regularized least squares method where the wavefront is reconstructed not only using tangential but also sagittal curvature data. We prove that our new method provides improved quality reconstruction for typical and also for highly aberrated wavefronts, under a wide range of experimental error levels. Our method may be applied to any type of wavefront sensor (not only dynamic skiascopy) able to measure either just tangential or tangential plus sagittal curvature data.

Applying Least Absolute Shrinkage Selection Operator and Akaike Information Criterion Analysis to Find the Best Multiple Linear Regression Models between Climate Indices and Components of Cow’s Milk

This study focuses on multiple linear regression models relating six climate indices (temperature humidity THI, environmental stress ESI, equivalent temperature index ETI, heat load HLI, modified HLI (HLI new), and respiratory rate predictor RRP) with three main components of cow’s milk (yield, fat, and protein) for cows in Iran. The least absolute shrinkage selection operator (LASSO) and the Akaike information criterion (AIC) techniques are applied to select the best model for milk predictands with the smallest number of climate predictors. Uncertainty estimation is employed by applying bootstrapping through resampling. Cross validation is used to avoid over-fitting. Climatic parameters are calculated from the NASA-MERRA global atmospheric reanalysis. Milk data for the months from April to September, 2002 to 2010 are used. The best linear regression models are found in spring between milk yield as the predictand and THI, ESI, ETI, HLI, and RRP as predictors with p-value < 0.001 and R2 (0.50, 0.49) respectively. In summer, milk yield with independent variables of THI, ETI, and ESI show the highest relation (p-value < 0.001) with R2 (0.69). For fat and protein the results are only marginal. This method is suggested for the impact studies of climate variability/change on agriculture and food science fields when short-time series or data with large uncertainty are available.

Transition matrices characterizing a certain totally discontinuous map of the interval

We study a totally discontinuous interval map defined in [0,1] which is associated to a deformation of the shift map on two symbols 0−1. We define a sequence of transition matrices which characterizes the effect of the interval map on a family of partitions of the interval [0,1]. Recursive algorithms that build the sequence of matrices and their left and right eigenvectors are deduced. Moreover, we compute the Artin zeta function for the interval map.

Issues in the development of pitch labelling skill

Pitch discrimination skills are important for general musicianship. The ability to name musical notes or produce orally any named note without the benefit of a known reference is called Absolute Pitch (AP) and is comparatively rare. Relative Pitch (RP) is the ability to name notes when a known reference is available. AP has historically been regarded as being innate. This paper will examine the notion that pitch discrimination skill is based on knowledge constructed through a suite of experiences. That is, it is learnt. In particular, it will be argued that early experiences promote the development of AP. Second it will argue that AP and RP represent different types of knowledge, and that this knowledge emerges from different experiences. AP is a unique research phenomenon because it spans the fields of cognition and perception, in that it links verbal labels with physiological sensations, and because of its rarity. It may provide a vantage for investigating the nature/nurture of musicianship; expertise; knowledge structure development; and the role of knowledge in perception. The study of AP may inform educational practice and curriculum design both in music and cross-curriculur. This paper will report an initial investigation into the similarities and differences between the musical experiences of AP possessors and the manifestation of their AP skill. Interview and questionnaire data will be used for the development and proposal of a preliminary model for AP development.

Existential experience : the unfolding

This paper reports on a project concerned with the relationship between person and space in the context of achieving a contemplative state. The need for such a study originated with the desire to contribute to the design of multicultural spaces which could be used for a range of activities including prayer and meditation. Given that the words ‘prayer’ and ‘meditation’ are highly value-laden and potentially alienating for some people, it was decided to use the more accessible term ‘contemplative’. While the project is still underway,several findings have emerged that can be reported on and are of relevance to the conference both methodologically and substantively. Informed by phenomenological methodology, data were collected from a diverse group of people using photo-elicitation and interviewing. The technique of photo-elicitation proved to be highly effective in helping people to reveal their everyday lived experience of contemplative spaces. This methodological aspect of the project is described more fully in the paper. The initial stage of analysis produced two categories of data: varying conceptions of contemplation and contemplative space; and, common understandings of contemplation and contemplative space. From this it was found that achieving a state of contemplation involves both the person and the environment in a dialectic process of unfolding. The unfolding has various physical, psycho-social, and existential dimensions or qualities which operate sequentially and simultaneously. In the paper, these are labelled:the unfolding of the core; distinction; manifestation; cleansing; creation; and sharing, and have parallels with Mircea Eliade’s 1959 definition of sacred as 'something that manifests itself, shows itself, as something wholly different from the profane’. It also connects with the views of Nishida Kitaro from the Kyoto School of Philosophy on the theme of ‘absolute nothingness’: ‘the body-mind is dropped off and we are united with the consciousness of absolute nothingness’ (Kitaro in Heisig, 2001, p. 169). According to Marion (2005), ‘nothingness’ is defined by givenness. In the paper, this fold of givenness is interpreted in the context of the qualities of the environment that accomplish the act of coming forward into visibility through the dialectic relationship with a person. (Eliade, 1959, Heisig, 2001, Marion, 2002)

Review of vibration-based damage detection and condition assessment of bridge structures using structural health monitoring

As a part of vital infrastructure and transportation networks, bridge structures must function safely at all times. However, due to heavier and faster moving vehicular loads and function adjustment, such as Busway accommodation, many bridges are now operating at an overload beyond their design capacity. Additionally, the huge renovation and replacement costs always make the infrastructure owners difficult to undertake. Structural health monitoring (SHM) is set to assess condition and foresee probable failures of designated bridge(s), so as to monitor the structural health of the bridges. The SHM systems proposed recently are incorporated with Vibration-Based Damage Detection (VBDD) techniques, Statistical Methods and Signal processing techniques and have been regarded as efficient and economical ways to solve the problem. The recent development in damage detection and condition assessment techniques based on VBDD and statistical methods are reviewed. The VBDD methods based on changes in natural frequencies, curvature/strain modes, modal strain energy (MSE) dynamic flexibility, artificial neural networks (ANN) before and after damage and other signal processing methods like Wavelet techniques and empirical mode decomposition (EMD) / Hilbert spectrum methods are discussed here.

Computer simulation in spine biomechanics : An application in adolescent idiopathic scoliosis

Scoliosis is a spinal deformity, involving a side-to-side curvature of the spine in the coronal plane as well as a rotation of the spinal column in the transverse plane. The coronal curvature is measured using a Cobb angle. If the deformity is severe, treatment for scoliosis may require surgical intervention whereby a rod is attached to the spinal column to correct the abnormal curvature. In order to provide surgeons with an improved ability to predict the likely outcomes following surgery, techniques to create patient-specific finite element models (FEM) of scoliosis patients treated at the Mater Children’s Hospital (MCH) in Brisbane are being developed and validated. This paper presents a comparison of the simulated and clinical data for a scoliosis patient treated at MCH.

The measurement of applied forces during anterior single rod correction of adolescent idiopathic scoliosis

Adolescent idiopathic scoliosis (AIS) is the most common form of spinal deformity in paediatrics, prevalent in approximately 2-4% of the general population. While it is a complex three-dimensional deformity, it is clinically characterised by an abnormal lateral curvature of the spine. The treatment for severe deformity is surgical correction with the use of structural implants. Anterior single rod correction employs a solid rod connected to the anterior spine via vertebral body screws. Correction is achieved by applying compression between adjacent vertebral body screws, before locking each screw onto the rod. Biomechanical complication rates have been reported as high as 20.8%, and include rod breakage, screw pull-out and loss of correction. Currently, the corrective forces applied to the spine are unknown. These forces are important variables to consider in understanding the biomechanics of scoliosis correction. The purpose of this study was to measure these forces intra-operatively during anterior single rod AIS correction.

Generation of a 3D proximal femur shape from a single projection 2D radiographic image.

Summary Generalized Procrustes analysis and thin plate splines were employed to create an average 3D shape template of the proximal femur that was warped to the size and shape of a single 2D radiographic image of a subject. Mean absolute depth errors are comparable with previous approaches utilising multiple 2D input projections. Introduction Several approaches have been adopted to derive volumetric density (g cm-3) from a conventional 2D representation of areal bone mineral density (BMD, g cm-2). Such approaches have generally aimed at deriving an average depth across the areal projection rather than creating a formal 3D shape of the bone. Methods Generalized Procrustes analysis and thin plate splines were employed to create an average 3D shape template of the proximal femur that was subsequently warped to suit the size and shape of a single 2D radiographic image of a subject. CT scans of excised human femora, 18 and 24 scanned at pixel resolutions of 1.08 mm and 0.674 mm, respectively, were equally split into training (created 3D shape template) and test cohorts. Results The mean absolute depth errors of 3.4 mm and 1.73 mm, respectively, for the two CT pixel sizes are comparable with previous approaches based upon multiple 2D input projections. Conclusions This technique has the potential to derive volumetric density from BMD and to facilitate 3D finite element analysis for prediction of the mechanical integrity of the proximal femur. It may further be applied to other anatomical bone sites such as the distal radius and lumbar spine.

How the whiteness embedded in health services impacts on the health and well-being of Aboriginal peoples

Aboriginal women are treated differently by non-indigenous health care providers based on perceptions of Aboriginality and skin colour and white race privilege within health care environments. The experiences shared below are from some of the Aboriginal woman respondents in a research project undertaken within Rockhampton, a regional area in Central Queensland (Fredericks, 2003). The experiences give an insight into how the Aboriginal women interviewed felt and their observations of how other Aboriginal women were treated within health care settings based on skin colour and perceptions of Aboriginality. A number of the women demonstrated a personal in-depth analysis of the issues surrounding place, skin colour and Aboriginality. For example, one of the women, who I named Kay, identified one particular health service organisation and stated that, ‘it is a totally white designed space. There is nothing that identifies me to that place. I just won’t go there as a client because I don’t feel they cater for me as a black woman’. Kay’s words give us an understanding of the reality experienced by Aboriginal women as they move in and out of places within health environments and broader society. Some of these experiences are examples of direct racism, whilst other examples are subtle and demonstrate how whiteness manifests and plays out within places. I offer acknowledgement and honour to the Aboriginal women who shared their stories and gave me a glimpse of their realities in the research project from which the findings presented in this chapter are taken. It is to this research project that is the subject of this chapter.

There is nothing that 'identifies me to that place' : Aboriginal Women's perceptions of health spaces and places

There is a growing body of literature within social and cultural geography that explores notions of place, space, culture, race and identity. The more recent works suggest that places are experienced and understood in multiple ways and are embedded within an array of politics. Memmott and Long, who have undertaken place-based research with Australian Indigenous people, present the theoretical position that ‘place is made and takes on meaning through an interaction process involving mutual accommodation between people and the environment’. They outline that places and their cultural meanings are generated through one or a combination of three types of people–environment interactions. These include: a place that is created by altering the physical characteristics of a piece of environment and which might encompass a feature or features which are natural or made; a place that is created totally through behaviour that is carried out within a specific area, therefore that specific behaviour becomes connected to that specific place; and a place created by people moving or being moved from one environment to another and establishing a new place where boundaries are created and activities carried out. All these ideas of places are challenged and confirmed by what Indigenous women have said about their particular use of, and relationship with, space within several health services in Rockhampton, Central Queensland. As my title suggests, Indigenous women do not see themselves as ‘neutral’ or ‘non-racialised’ citizens who enter and ‘use’ a supposedly neutral health service. Instead, Aboriginal women demonstrate they are active recognisers of places that would identify them within the particular health place. That is, they as Aboriginal women didn’t just ‘make’ place, the places and spaces ‘make’ them. The health services were identified as sites within which spatial relations could begin to grow with recognition of themselves as Aboriginal women in place, or instead create a sense of marginality in the failure of the spaces to identify them. The women’s voices within this paper are drawn from interviews undertaken with twenty Aboriginal women in Rockhampton, Central Queensland, Australia, who participated in a research project exploring ‘how the relationship between health services and Aboriginal women can be more empowering from the viewpoints of Aboriginal women’. The assumption underpinning this study was that empowering and re-empowering practices for Aboriginal women can lead to improved health outcomes. Throughout the interviews women shared some of their lived realities including some of their thoughts on identity, the body, employment in the health sector, service delivery and their notions of health service spaces and places. Their thoughts on health service spaces and places provide an understanding of the lived reality for Aboriginal women and are explored and incorporated within this paper.

Using Trauma Injury Severity Score (TRISS) variables to predict length of hospital stay following trauma in New Zealand

Aim – To develop and assess the predictive capabilities of a statistical model that relates routinely collected Trauma Injury Severity Score (TRISS) variables to length of hospital stay (LOS) in survivors of traumatic injury. Method – Retrospective cohort study of adults who sustained a serious traumatic injury, and who survived until discharge from Auckland City, Middlemore, Waikato, or North Shore Hospitals between 2002 and 2006. Cubic-root transformed LOS was analysed using two-level mixed-effects regression models. Results – 1498 eligible patients were identified, 1446 (97%) injured from a blunt mechanism and 52 (3%) from a penetrating mechanism. For blunt mechanism trauma, 1096 (76%) were male, average age was 37 years (range: 15-94 years), and LOS and TRISS score information was available for 1362 patients. Spearman’s correlation and the median absolute prediction error between LOS and the original TRISS model was ρ=0.31 and 10.8 days, respectively, and between LOS and the final multivariable two-level mixed-effects regression model was ρ=0.38 and 6.0 days, respectively. Insufficient data were available for the analysis of penetrating mechanism models. Conclusions – Neither the original TRISS model nor the refined model has sufficient ability to accurately or reliably predict LOS. Additional predictor variables for LOS and other indicators for morbidity need to be considered.

Changing motorcycle rider safety attitudes and motives for risk taking : process evaluation of a rider training intervention

Risk-taking behaviour by motorcyclists has been shown to contribute to a substantial proportion of road crashes in Australia and abroad. Concern has been expressed that traditional motorcycle licence training programs do not sufficiently address such behaviour. Accordingly, the Three Steps to Safer Riding program was developed to address risk taking behaviour by riders as an adjunct to existing skills-based rider training. The program was designed to be delivered in a one hour classroom session at the start of training, with a 20 minute debrief to revise the key concepts at the end of training. This paper reports on the key training concepts, methodology and implementation of the pilot program with a major rider training organisation in Queensland and presents findings from a process evaluation. The Three Steps to Safer Riding intervention pilot was delivered to 518 learner riders over a three month period. Follow-up focus groups and one interview with intervention participants (N=18) five to eight months after completion of the program suggest that new riders (absolute novices) embraced and internalised many of the intervention concepts. However, some riders who had previous riding experience prior to training stated these issues were common sense, yet still expressed riding styles that were contrary to some of the key intervention messages. This is discussed in terms of raising awareness of risk issues for motorcyclists versus behaviour change. Additionally, interviews conducted with riding instructors are discussed regarding logistical challenges of implementation, training consistency, skills required to deliver the program, support for the program, and student engagement.