Matéria húmica de sapal: variações estruturais e complexação com o cobre

No presente trabalho foram estudadas as variações na composição, estrutura e comportamento das substâncias húmicas sedimentares (SHS), promovidas pela presença de duas espécies de plantas da família Chenopodiacea, presentes nos sapais da Ria de Aveiro: a Halimione portulacoides e a Arthrocnemum fruticosum. Para além das variações espaciais horizontais, foram investigadas as variações ao longo de um perfil de profundidades. Desta forma, para além da camada superficial (0-10 cm) de sedimentos com diferentes espécies de plantas e sem plantas, também foram investigadas camadas de sedimentos intermédia (20-25 cm) e profunda (45-50 cm). Para a extracção das SHS recorreu-se a uma pequena modificação do método proposto pela International Humic Substances Society (IHSS) para extracção e purificação de substâncias húmicas de solos. As SH extraídas foram caracterizadas através dos métodos espectroscópicos de absorção no ultravioleta visível, de fluorescência molecular síncrona, de absorção no infravermelho com transformadas de Fourier (FTIR) e de RMN 13C em estado sólido. Estas técnicas de caracterização foram complementadas pela análise elementar e termogravimetria. Em algumas amostras, foram ainda determinados o conteúdo em alguns metais por ICP-AES e o conteúdo funcional ácido por titulações potenciométricas. Após exaustiva caracterização das amostras de AH, procedeu-se ao estudo da sua capacidade de complexação com o cobre, recorrendo a titulações monitorizadas por fluorescência molecular síncrona. Os resultados revelaram que a colonização de sedimentos por plantas vasculares superiores conduz a uma alteração profunda no ambiente sedimentar e que esta é reflectida na diagénese das substâncias húmicas sedimentares, tendo-se observado variações a uma pequena escala espacial. O estudo deste tipo de variações nunca tinha sido efectuado em trabalhos anteriores. Nos ácidos fúlvicos detectaram-se diferenças na composição e estrutura das amostras correspondentes às camadas superiores de sedimentos, reflectindo a presença de diferentes colonizações vegetais. Relativamente aos ácidos húmicos, foi possível classificá-los em dois tipos distintos. Os AH do tipo I correspondem aos sedimentos superficiais e intermédios dos locais com plantas. Neste tipo de AH verificou-se uma incorporação de polissacarídeos e estruturas peptídicas, em estados de humificação pouco desenvolvidos. Os AH do tipo II correspondem aos sedimentos mais profundos de todos os locais e aos intermédios do local sem plantas e caracterizam-se por um maior grau de humificação e polimerização, um maior conteúdo aromático e de estruturas conjugadas e um maior conteúdo de grupos carboxílicos. Essas diferenças estruturais conduzem a diferentes comportamentos ácido/base e de complexação com o cobre. Assim, os AH do tipo I, que apresentam sinais espectroscópicos mais baixos associados a grupos carboxílicos e fenólicos, têm menor conteúdo de grupos funcionais ácidos e menor capacidade de complexação com o cobre quando se consideram ligandos característicos de unidades aromáticas conjugadas. Relativamente aos valores de log K dos complexos de AHS com o cobre, as amostras representativas da camada superficial dos sedimentos com plantas apresentaram valores superiores aos das restantes amostras de AH estudadas, cujos valores de log K são similares entre si. Atendendo aos resultados de análise elementar e espectroscópica, este facto pode estar associado à presença de compostos de azoto não peptídicos. Quanto a outros ligandos para o cobre, nomeadamente os representativos de estruturas peptídicas contendo o aminoácido triptofano e estruturas aromáticas simples, não foi possível obter resultados conclusivos. Dado que os ácidos húmicos do tipo I demonstraram um maior conteúdo peptídico e menor conteúdo aromático, o estudo destes ligandos torna-se importante para compreender melhor o efeito da presença de plantas nos sedimentos de sapal sobre o comportamento dos ácidos húmicos sedimentares como ligandos para o cobre. Refere-se ainda que foram detectadas certas especificidades na variação das características do sedimento e das substâncias húmicas com a profundidade nos diferentes locais estudados que não podem ser explicadas meramente com a presença de material vegetal oriundo de diferentes espécies de plantas, requerendo um conhecimento mais aprofundado das comunidades bentónicas e do ambiente físico-químico do sedimento.

Analytical methods to study fate of organic pollutants in environment

Environmental transport of pollutants comprises distinct processes such as volatilization, leaching and surface runoff. Sorption is one of the most important phenomena that affects leaching, and thus the fate of hydrophobic organic pollutants in soils and also control their distribution in the soil/water environment. The work developed focuses the optimization of analytical techniques for monitoring the sorption behaviour of organic pollutants, 17α- ethinylestradiol (EE2) and atrazine, and their fate in aqueous environment. Initially, the development of several analytical techniques, such as micellar electrokinetic chromatography, spectral deconvolution, using UV-Vis and fluorescence spectroscopy, and also enzyme linked immunosorbent assay was performed. Optimization, method performance and recovery tests are described and results discussed. Moreover, in order to evaluate the applicability of the previously optimized method, atrazine and EE2 sorption to soil samples was performed. The work developed provide several options, in terms of methodology to follow sorption of atrazine onto soils, however the choice depends on the laboratory conditions and on the analyst preferences. The advantages and disadvantages of each methodology should be evaluated first. The second part of this work consisted in the sorption behaviour study of those two different hydrophobic organic pollutants onto different soil samples. Soil organic matter chemical characterization, being essential to understand the binding mechanism responsible for the interactions, was made. The results of atrazine binding to organic matter pointed out that carboxyl units and aromaticrich organic matter are the most efficient binding agents for atrazine. EE2 adsorbs strongly to soil organic matter and is mainly stabilized by hydrophobic interactions, through aromatic nuclei face to face with surface and/or another EE2 molecule association. Farmyard manure soil contains higher aromatic and carboxyl units, indicating that this type of manure can be effectively used to minimize the residual toxicity of EE2 and atrazine present in soils, increasing the sorption and reducing leaching onto water resources. Since the final destination of organic pollutants can be ground, surface and/or waste water, atrazine and 17α-ethinylestradiol were quantified in several water samples.

Maturação de lamas vulcânicas açorianas e sua aplicação em peloterapia

Em Portugal, nomeadamente nos Açores (Centro Termal das Furnas), durante vários anos foram utilizados pelóides naturais (lamas/argilas obtidos após conveniente maturação com água mineral) como agentes terapêuticos. Apesar das evidências empíricas da aplicação das argilas para fins terapêuticos, o suporte científico é ainda escasso. Além disso, contrariamente ao que se verifica para águas minerais utilizadas para fins termais, no campo da peloterapia, não existe regulamentação que estabeleça critérios quanto à qualidade padrão de um pelóide. Este trabalho visou a avaliação das características biológicas, físico-químicas e mineralógicas de lamas vulcânicas das ilhas de São Miguel e da Terceira para aplicação em peloterapia antes e após maturação. A área de amostragem foi caracterizada sob o ponto de vista geomorfológico, geológico, hidrológico e climático. A análise dos materiais colhidos contemplou estudos de granulometria e de mineralogia da amostra total e da fracção argilosa; caracterização química; e determinação de outras propriedades tais como índice de abrasividade, superfície específica, pH, capacidade de troca catiónica e catiões de troca, limites de consistência (plasticidade e liquidez e índice de plasticidade) e taxa de arrefecimento. A caracterização biológica das lamas incluiu a identificação e quantificação relativa de diatomáceas e a determinação do teor em coliformes totais e microrganismos cultiváveis a 37 ºC e a 22 ºC. Estudos efectuados em amostras comerciais argilosas e em recursos naturais açorianos precederam os ensaios de maturação. Estes estudos visaram, fundamentalmente, aferir as características apropriadas dos materiais para aplicação tópica e detectar e caracterizar a presença de comunidades diatomológicas em locais próximos dos materiais a serem sujeitos a maturação. O estudo de maturação foi desenvolvido em duas etapas sequenciais e complementares com vista à optimização do processo de maturação de lamas vulcânicas açorianas. Foi testada a influência de algumas condições abióticas na maturação e fez-se variar a fracção granulométrica, proporção fase sólida:fase líquida e o tempo de maturação entre os dois ensaios. O uso da granulometria <63 μm, proporção de 2:1 (fase sólida:fase líquida) e condições de luminosidade, sem agitação parecem ser as mais adequadas à maturação dos materiais analisados. A maturação revela-se um processo que promove a melhoria de características importantes dos materiais para aplicação em peloterapia, tais como aumento dos tempos de arrefecimento e da quantidade de catiões de troca. Existe uma comunidade de microalgas e bacteriana capaz de se desenvolver em materiais geológicos vulcânicos durante a maturação e cujo contributo para a acção terapêutica do pelóide deverá ser aferida. Após comparação com materiais de referência, a amostra das Furnas revela as características mais adequadas para aplicação em peloterapia.

Effect of water chemistry on the physiology and toxicity assessment in Daphnia

Todos os sistemas aquáticos estão potencialmente expostos a alterações nos parâmetros da água em consequência de fenómenos ambientais tais como deposição ácida, lixiviação de iões dos solos e alterações climáticas. Dado que os parâmetros químicos da água estão geralmente correlacionados, é pertinente estudar os seus efeitos combinados para o biota aquático. Assim, o principal objetivo desta tese é avaliar a importância ecológica da variação simultânea dos principais parâmetros fisico-químicos da água nos parâmetros de história de vida dos crustáceos tanto na ausência como na presença de metais. Foram estudados os seguintes parâmetros: dureza (0.5 - 3.5 mM), alcalinidade (0.3 - 2.3 mM), pH (5.7 - 9.0) e temperatura (13 - 30ºC). A Daphnia magna foi usada como espécie modelo representando os crustáceos aquáticos. A variação simultânea da dureza e alcalinidade afetou significativamente o crescimento, reprodução e crescimento populacional de Daphnia; no entanto, os efeitos da dureza excederam os efeitos da alcalinidade. Pareceu haver interação entre a dureza e alcalinidade na reprodução dos dafnídeos, o que sugere que os efeitos da variação da dureza para Daphnia e provavelmente outros crustáceos poderão depender do nível de alcalinidade. O pH e dureza da água exerceram efeitos combinados para Daphnia, sendo os efeitos do pH mais pronunciados do que os efeitos da dureza. A diminuição do pH reduziu a sobrevivência, crescimento, reprodução, taxa de ingestão e crescimento populacional dos dafnídeos. No entanto, os efeitos do pH baixo foram mais adversos a baixa dureza, o que sugere uma interação entre estes parâmetros. Assim, a diminuição do pH em lagos de água mole pode ser um estressor determinante para os crustáceos sensíveis à acidez, ameaçando a sua sobrevivência e, consequentemente, afetando a estrutura das cadeias alimentares aquáticas. A temperatura e a química da água (dureza e alcalinidade) interagiram entre si nos parâmetros de história de vida de Daphnia; no entanto, os efeitos da temperatura excederam os efeitos da química da água. De um modo geral, temperaturas extremas reduziram o crescimento, reprodução e, consequentemente, o crescimento populacional de Daphnia. Os efeitos do aumento da temperatura foram mais adversos a baixa dureza e alcalinidade, aumentando a preocupação com os efeitos ecológicos do aquecimento global em águas moles. A dureza e alcalinidade da água também desempenharam um papel importante na toxicidade aguda e subletal (inibição da ingestão) dos metais para Daphnia. A diminuição da dureza aumentou a toxicidade aguda do zinco. Por outro lado, a diminuição da alcalinidade aumentou a toxicidade aguda e subletal do cobre, mas reduziu a toxicidade subletal do zinco, tornando evidente o importante papel da alcalinidade na toxicidade subletal dos metais para Daphnia. Globalmente, os parâmetros fisico-químicos da água parecem interagir entre si, afetando os parâmetros de história de vida e o crescimento populacional de Daphnia e também afetam a toxicidade dos metais. Em particular, a baixa dureza agrava os efeitos adversos da diminuição do pH, aumento da temperatura e toxicidade dos metais, o que aumenta a preocupação com os efeitos ecológicos da sua variação simultânea sobre os crustáceos e, portanto, sobre as cadeias alimentares aquáticas.

Thiram in the environment: effect of humic substances and Cu(II) ions

Em Portugal, o tirame é um dos fungicidas mais utilizados, cujas vendas aumentaram significativamente nos últimos anos, sendo também um dos fungicidas mais utilizados em todo o mundo. No entanto, em comparação com outros pesticidas, existe falta de informação na literatura sobre o seu comportamento em sistemas ambientais, nomeadamente, no que diz respeito à sua degradação no solo ou em águas e produtos a que dá origem. Neste contexto, o objetivo deste trabalho foi estudar a influência das substâncias húmicas e iões cobre no comportamento e destino do tirame no meio ambiente. Foram realizados vários estudos para analisar o comportamento do tirame em solos com diferentes conteúdos de matéria orgânica e de iões cobre, e em águas naturais, estudando como as substâncias húmicas, os iões cobre e a luz solar podem afetar a sua degradação. Os estudos de adsorção-desadsorção do tirame nos solos revelaram que a matéria orgânica do solo e o conteúdo de cobre afetavam os processos de adsorção-desadsorção do tirame, influenciando a sua lixiviação e persistência no solo. De facto, verificou-se que o teor de cobre do solo tinha um efeito bastante marcante no processo de adsorçãodesadsorção do tirame. Verificou-se a ocorrência de reações entre o tirame e os iões cobre, cuja extensão durante os estudos de adsorção pode ser fortemente dependente do teor de cobre do solo e da concentração inicial de tirame em solução. Assim, a escolha do tempo de equilíbrio em estudos de adsorção e a determinação das isotérmicas de adsorção ao solo torna-se uma tarefa difícil. Além disso, os complexos formados com o cobre existente no solo são persistentes, não sendo facilmente lixiviados para as águas subterrâneas. Conclui-se que os iões cobre(II) podem contribuir para a imobilização do tirame no solo e o aumento da persistência dos seus resíduos ligados ao cobre. A partir de estudos de recuperação do tirame em águas naturais verificou-se a ocorrência de uma rápida degradação do tirame, devido provavelmente aos iões metálicos, nomeadamente, iões cobre. Verificou-se que dependendo da razão tirame:Cu podiam ocorrer dois processos: (i) complexação entre o tirame e o cobre, quando não há excesso de iões cobre, sendo o complexo formado mais persistente que o tirame; (ii) ou, quando há um grande excesso de iões cobre, a degradação do tirame e a estabilização dos produtos de degradação por complexação, podendo formar-se complexos que permanecem sem alteração em solução durante pelo menos dois meses. No geral, foi possível, pela primeira vez, identificar alguns dos complexos de cobre formados ao longo do tempo. Por fim, estudou-se a cinética de fotodegradação do tirame em solução aquosa sob a ação da luz solar e identificaram-se, pela primeira vez, três fotoprodutos. Verificou-se um aumento da velocidade de fotodegradação do tirame na presença de substâncias húmicas. Assim, podemos concluir que a matéria orgânica, os iões cobre(II) e a luz solar têm um efeito importante no comportamento do tirame no meio ambiente. Contudo, os iões cobre têm um efeito mais marcante na degradação e persistência dos produtos que são formados.

Study of the Cd complexation mechanism by glutathione in Rhizobium leguminosarum

A associação simbiótica de plantas leguminosas com bactérias do género Rhizobium é o maior e mais eficiente contribuinte de azoto fixado biologicamente (Somasegaran e Hoben, 1994; Zahran, 1999). No entanto, o constante aumento da poluição em solos agrícolas, nomeadamente a contaminação por metais devido à aplicação de fertilizantes e de lamas, está a tornar-se um problema ambiental cada vez mais preocupante (Alloway, 1995a; Giller et al., 1998; Permina et al., 2006; Thorsen et al., 2009; Wani et al., 2008), influenciando de forma negativa a persistência destas bactérias nos solos agrícolas, assim como a sua eficácia de nodulação (Broos et al., 2005; Wani et al., 2008;. Zhengwei et al., 2005). Desta forma, o estudo dos mecanismos de tolerância de Rhizobium a metais tornou-se uma área de investigação de elevada importância. Com o trabalho apresentado nesta tese pretendeu-se perceber melhor a tolerância Rhizobium leguminosarum ao cádmio (Cd), dando particular atenção a um mecanismo de tolerância previamente descrito em R. leguminosarum (Lima et al., 2006): a complexação intracelular de Cd pelo tripéptido glutationa (GSH). Assim, o principal objectivo deste trabalho foi perceber melhor qual a importância deste mecanismo nos níveis de tolerância de rizóbio ao Cd. Como já tinha sido descrito em trabalhos anteriores (Figueira et al., 2005; Lima et al., 2006), foi possível verificar que a estirpe mais tolerante ao metal apresenta níveis mais elevados de Cd e GSH intracelulares. Demonstrou-se ainda que a tolerância ao Cd está dependente da maior eficiência no mecanismo de complexação observada na estirpe tolerante, logo durante as primeiras 12 h de crescimento. Gomes et al. (2002) verificou que a acumulação de complexos GSH-Cd no citoplasma inibe a entrada de metal na célula. Como neste trabalho se observou um aumento nos níveis de Cd intracelular na estirpe tolerante ao longo do tempo, surgiu a hipótese dos complexos serem excretados para o espaço periplasmático. Os elevados níveis de GSH e de Cd determinados no espaço periplasmático corroboraram esta hipótese. Neste trabalho demonstrou-se ainda que a eficácia do mecanismo de complexação, depende da actividade enzimática de uma isoforma específica de GST, que apresentou um elevado acréscimo de actividade na presença do metal. Desta forma, os resultados desta tese indicam que, a maior tolerância de R. leguminosarum ao Cd, depende da capacidade das estirpes para induzir a síntese de GSH na presença de Cd e, simultaneamente aumentar a actividade enzimática da GST específica, optimizando assim o mecanismo de complexação de Cd intracelular.

Soil function and biodiversity: regional variations and climate changes

Embora o objetivo principal da proteção internacional dos solos seja proteger tanto as funções quanto a estrutura do solo, a atual abordagem trata principalmente da proteção ao nível estrutural. Há uma carência de estudos que contemplem a ligação das funções do solo com os níveis da comunidade. Além disso, é ainda desconhecido se as variáveis ambientais (ex: tipos de solo, condições climáticas) atuam nas funções do solo da mesma maneira que influenciam sua estrutura biológica. Ademais, as alterações climáticas poderão ter sozinhas ou combinadas com os poluentes, um grande efeito nos ecossistemas terrestres. O presente trabalho propõe estudar as funções e a estrutura biológica do solo quando impactados devido a estresse tóxico (poluição por Cu) e/ou alterações a fatores como a temperatura e abundância de organismos, de maneira a simular possíveis variações regionais ou climáticas. Para alcançar os objetivos principais 3 experiências utilizando diferentes densidades de E. crypticus e 2 gerações foram feitas (Capítulos II e III). Duas experiências com mesocosmos (SMS) decorreram durante 3 meses sob uma gama de diversas temperaturas (10 – 29°C), que representam temperaturas médias para Portugal e Dinamarca (Capítulos IV e V). Duas experiências de campo também foram realizadas com intuito de validar os SMSs (Capítulo VI). Resultados demonstraram que os efeitos do Cu na reprodução dos enquitraídeos dependem da densidade inicial de organismos, especialmente na 2ª geração. Entretanto, nos SMSs expostos a Cu, a densidade inicial é menos importante nos resultados finais. O aumento da temperatura alterou majoritariamente a fase inicial de crescimento populacional. Em períodos mais longos, a abundância estabilizou tornando-se menos influenciada pelas temperaturas. Períodos longos de exposição reforçaram os efeitos da temperatura, como por ex: diversas espécies foram similarmente afetadas a 29 ou 26°C quando expostas durante 28 ou 61 dias respectivamente. De forma geral, o Cu reduziu a abundância da maioria das espécies ao longo do tempo, com poucas exceções. Os resultados da decomposição da matéria orgânica (MO) e atividade alimentar associaram-se com a abundância de organismos em baixas temperaturas (10-23°C). Entretanto, com o aumento das temperaturas (19-29°C), este comportamento não foi claro e a abundância de espécies e atividade alimentar diminuíram enquanto a decomposição da MO aumentou. Além disso, os resultados observados nos SMSs foram confirmados no campo. Mais especificamente, alterações ocorreram na fase de crescimento (correspondente à Primavera) e a exposição ao Cu diminuiu os efeitos da temperatura. Metodologias mais complexas (ex: mais gerações e experiências com múltiplas espécies) apresentam muitos benefícios, mas também proporcionam respostas mais complexas, as quais exigem um maior “peso” de evidências para serem comprovadas.

Soil erosion mitigation following forest wildfires

This study aims to measure the effectiveness of four post-fire emergency techniques for reducing overland flow and soil erosion on the central-Portugal typical forest. The selection and development of these techniques was based on the review of the scientific background, but specially after checking throughout field rainfall simulation experiments which factors were the key for runoff and soil erosion on the specific case of high repellent soils. The forest residue mulch, a new treatment never tested before, was highly effective in reducing runoff and soil erosion in recently burnt eucalypt forest. The logging slash mulch had no obvious effect, but it was attributed to the small amounts of runoff and sediments that the untreated plots produced due to the extensive needle cast following a low severity fire. The hydromulch, a mixture of water, organic fibres, seeds, nutrients and a surfactant used in cutted slopes rehabilitation was also highly successful and was specially indicated for especially sensible areas. The utilization of polyacrylamides, a chemical agent with good performance in agricultural erosion, was not successful in post-fire runoff and soil erosion control, once that did not alter the most important key factor for soil erosion: the ground cover. The development of a new fibre optic turbidity sensor was a successful development on the soil erosion determination methodology, and its patent is being processed in the mean time.

Challenges in mercury speciation and fractionation in soil and sediment

This investigation focused on the development, test and validation of methodologies for mercury fractionation and speciation in soil and sediment. After an exhaustive review of the literature, several methods were chosen and tested in well characterised soil and sediment samples. Sequential extraction procedures that divide mercury fractions according to their mobility and potential availability in the environment were investigated. The efficiency of different solvents for fractionation of mercury was evaluated, as well as the adequacy of different analytical instruments for quantification of mercury in the extracts. Kinetic experiments to establish the equilibrium time for mercury release from soil or sediment were also performed. It was found that in the studied areas, only a very small percentage of mercury is present as mobile species and that mobility is associated to higher aluminium and manganese contents, and that high contents of organic matter and sulfur result in mercury tightly bound to the matrix. Sandy soils tend to release mercury faster that clayey soils, and therefore, texture of soil or sediment has a strong influence on the mobility of mercury. It was also understood that analytical techniques for quantification of mercury need to be further developed, with lower quantification limits, particularly for mercury quantification of less concentrated fractions: water-soluble e exchangeable. Although the results provided a better understanding of the distribution of mercury in the sample, the complexity of the procedure limits its applicability and robustness. A proficiency-testing scheme targeting total mercury determination in soil, sediment, fish and human hair was organised in order to evaluate the consistency of results obtained by different laboratories, applying their routine methods to the same test samples. Additionally, single extractions by 1 mol L-1 ammonium acetate solution, 0.1 mol L-1 HCl and 0.1 mol L-1 CaCl2, as well as extraction of the organometallic fraction were proposed for soil; the last was also suggested for sediment and fish. This study was important to update the knowledge on analytical techniques that are being used for mercury quantification, the associated problems and sources of error, and to improve and standardize mercury extraction techniques, as well as to implement effective strategies for quality control in mercury determination. A different, “non chemical-like” method for mercury species identification was developed, optimised and validated, based on the thermo-desorption of the different mercury species. Compared to conventional extraction procedures, this method has advantages: it requires little to no sample treatment; a complete identification of species present is obtained in less than two hours; mercury losses are almost neglectable; can be considered “clean”, as no residues are produced; the worldwide comparison of results obtained is easier and reliable, an important step towards the validation of the method. Therefore, the main deliverables of this PhD thesis are an improved knowledge on analytical procedures for identification and quantification of mercury species in soils and sediments, as well as a better understanding of the factors controlling the behaviour of mercury in these matrices.

Derivation of soil screening values for metals in Portuguese natural soil

The increasing human activity has been responsible by profound changes and a constinuos degradation of the soil compartment in all the European territory. Some European policies are appearing focusing soil’s protection and the management of contaminated sites, in order to recover land for other uses. To regulate the risk assessment and the management of contaminated soils, many European member states adopted soil guideline values, as for example soil screnning values (SSV).These values are particularly useful for the the first tier of the Ecological Risk Assessment (ERA) processes of contaminated sites,especially for a first screening of sites requiring a more site-specific evaluation. Hence, the approriate definition of regional SSVs will have relevant economic impacts in the management of contaminated sites. Portugal is one of European Member States that still lack these soil guideline values. In this context, this study gaves a remarkable contribution in the generation of ecotoxicological data for soil microbiological parameters, terrestrial plants and invertebrates for the derivation of SSVs for uranium (U), cadmium (Cd) and copper (Cu), using a Portuguese natural soil, representative of a dominant type of soil in the Portuguese territory. SSVs were derived based on two methods proposed by the the Technical Guidance Document for Risk Assessment of the European Commission; namely the assessment factor method (AF) and the species sensitivity distribution (SSD) method (with some adaptations). The outputs of both methods were compared and discussed. Further, this study laid the foundation for a deeper reflection about the cut-off (hazard concentration for a given percentage of species - HCps) to be estimated from the SSDs, and to be selected for the derivation of SSVs, with the adequate level of protection. It was proven that this selection may vary for different contaminants, however a clear justification should be given, in each case. The SSvs proposed in this study were for: U (151.4 mg U kg-1dw), Cd (5.6 mg Cd kg-1dw), and Cu (58.5 mg Cu kg-1dw) These values should now be tested for their descriminating power of soils with different levels of contamination. However, this studies clarifies the approach that should be followed for the derivation of SSVs for other metals and organic contaminants, and for other dominant types of Portuguese natural soils.

Environmental factors, clipping and fire: effects on cerrado (Brazilian savanna) native and invasive grasses

The Brazilian Cerrado houses a hugely diverse biota and is considered a conservation hotspot. One of the greatest threats to the integrity of this ecosystem is introduced African grasses, which can competitively exclude native grasses and cause changes in the microclimate and other disturbances. The Cerrado is a mosaic vegetation that provides different combinations, both spatially and temporally, of conditions that can become natural stressors to the herbaceous vegetation (water, nutrient and light availability). These mosaics are reflected in differences in relationships among native and invasive species, affecting competition and creating situations (place/season) that are more, or less, susceptible to invasion. The present study aimed to identify the different biological responses of native (Aristida recurvata, Aristida setifolia, Axonopus barbigerus, Echinolaena inflexa, Gymnopogon spicatus, Paspalum gardnerianum, Paspalum stellatum, Schizachyrium microstachyum, Schizachyrium sanguineum) and invasive (Melinis minutiflora and Andropogon gayanus) grasses to variations in natural stressors and to disturbance (fire and clipping), in order to understand changes in ecosystem functioning and competition processes between the grasses, and to understand invasion dynamics in this ecosystem. The presence of invasive species proved to affect the ecosystem functioning by increasing soil feeding activity. These differences were no longer observed in the dry season or when fires were frequent, showing that water availability and fire are more detrimental to soil feeding activity than is the vegetation. Laboratory experiments showed that both drought and flood simulated scenarios damaged both species, although the invasive species performed better under all watering conditions and responded better to fertilization. Underlying mechanisms such as the efficiency of photosynthesis and antioxidant mechanisms helped to explain this behavior. The invasive species grew faster and showed less cellular damage and a healthier photosystem, reflected in higher assimilation rates under stress. These differences between the native and invasive species were reduced with clipping, especially in dry soil with no fertilization, where the native species recovered better in relation to the pre-clipping levels. Flooding was as stressful as drought, but the invasive species can bypass this issue by growing an extensive root system, especially in the better-drained soils. Fire is more detrimental than clipping, with a slower recovery, while post-fire temperatures affect the germination of both invasive and native seeds and may be an important factor influencing the persistence of a diverse biota. This approach will finally contribute to the choice of the appropriate management techniques to preserve the Cerrado’s biodiversity.

The effects of chemicals in isopods : a multi-organizational evaluation

The global aim of this thesis was to evaluate and assess the effects of a pesticide (dimethoate) and a metal (nickel), as model chemicals, within different organization levels, starting at the detoxification pathways (enzymatic biomarkers) and energy costs associated (energy content quantification, energy consumption and CEA) along with the physiological alterations at the individual and population level (mortality), leading to a metabolomic analysis (using liquid 1H-NMR) and finally a gene expression analysis (transcriptome and RT-qPCR analysis). To better understand potential variations in response to stressors, abiotic factors were also assessed in terrestrial isopods such as temperature, soil moisture and UV radiation. The evaluation performed using biochemical biomarkers and energy related parameters showed that increases in temperature might negatively affect the organisms by generating oxidative stress. It also showed that this species is acclimated to environments with low soil moisture, and that in high moisture scenarios there was a short gap between the optimal and adverse conditions that led to increased mortality. As for UV-R, doses nowadays present have shown to induce significant negative impact on these organisms. The long-term exposure to dimethoate showed that besides the neurotoxicity resulting from acetylcholinesterase inhibition, this stressor also caused oxidative stress. This effect was observed for both concentrations used (recommended field dose application and a below EC50 value) and that its combination with different temperatures (20ºC and 25ºC) showed different response patterns. It was also observed that dimethoate’s degradation rate in soils was higher in the presence of isopods. In a similar study performed with nickel, oxidative stress was also observed. But, in the case of this stressor exposure, organisms showed a strategy where the energetic costs necessary for detoxification (biomarkers) seemed to be compensated by positive alterations in the energy related parameters. In this work we presented for the first time a metabolomic profile of terrestrial isopods exposed to stressors (dimethoate and niquel), since until the moment only a previous study was performed on a metabolomic evaluation in nonexposed isopods. In the first part of the study we identify 24 new metabolites that had not been described previously. On the second part of the study a metabolomic profile variation of abstract non-exposed organism throughout the exposure was presented and finally the metabolomic profile of organisms exposed to dimethoate and nickel. The exposure to nickel suggested alteration in growth, moult, haemocyanin and glutathione synthesis, energy pathways and in osmoregulation. As for the exposure to dimethoate alterations in osmoregulation, energy pathways, moult and neurotransmission were also suggested. In this work it was also presented the first full body transcriptome of a terrestrial isopod from the species Porcellionides pruinosus, which will complement the scarce information available for this group of organisms. This transcriptome also served as base for a RNA-Seq and a RT-qPCR analysis. The results of the RNA-Seq analysis performed in organisms exposed to nickel showed that this stressor negatively impacted at the genetic and epigenetic levels, in the trafficking, storage and elimination of metals, generates oxidative stress, inducing neurotoxicity and also affecting reproduction. These results were confirmed through RT-qPCR. As for the impact of dimethoate on these organisms it was only accessed through RT-qPCR and showed oxidative stress, an impact in neurotransmission, in epigenetic markers, DNA repair and cell cycle impairment. This study allowed the design of an Adverse Outcome Pathway draft that can be used further on for legislative purposes.

Sustainable viticulture in Bairrada appellation: vineyard and harvest year effects on grapes oenological potential

The sustainable viticulture of a region passes, among other aspects, for maximizing the varieties potential minimizing subsequent interventions during winemaking, which should contribute to the production of quality wines maintaining their typicity and rationalizing costs. The detailed knowledge of each Appellation specificities, namely vineyard parcel (soil type and topographical peculiarities) and harvest climatic conditions is crucial for sustainability in this sector. Thus, in line with this current trend, the starting point for the development of this PhD thesis was to evaluate the oenological potential of different varieties cultivated throughout Bairrada Appellation (Portugal). During maturation several changes in grape varieties occur, namely berries become sweeter, less acidic, and they develop flavour, aroma and colour properties. The development of these characteristics is essential to define grapes oenological potential, i.e. to estimate the possibility of their usage to produce specific wines. A three years sampling plan was designed to evaluate the effect of harvest year and parcel characteristics on V. vinifera cv. Arinto, Bical, Sauvignon Blanc, Baga, Castelão, Touriga Nacional, and Sousão grapes composition. For each variety, 3 parcels with different characteristics were selected. Several physicochemical parameters were evaluated, during maturation: berry weight, pH, titratable acidity, sugar and phenolic contents, antiradical activity, and volatile composition (free fraction). Special attention was devoted to grapes at technologic maturity, since, besides these parameters, glycosidically-linked fraction was also considered. By using the results obtained at technologic maturity, a comprehensive approach was applied to identify the significance of harvest and parcel characteristics effects on each variety composition. Considering all the parameters under study, it may be highlighted some significant differences. According to the obtained results determined during maturation, it was possible to conclude that Arinto, Bical and Sauvignon Blanc grapes from parcels with clay-sandy and clay-calcareous soils have higher phenolic content and antiradical activity. Otherwise, Sauvignon Blanc presented similar volatile composition for grapes cultivated in the 3 parcels, while Arinto and Bical exhibited higher volatile content in grapes from claysandy and clay-calcareous soils. For Baga, Castelão and Touriga Nacional red varieties, grapes with higher phenolic content, antiradical activity, and volatile content were obtained from clayey and clay-calcareous soils. Furthermore, for Touriga Nacional, parcels altitude seems also to modulate grapes composition. Beyond parcel effect, harvest year conditions also influence grapes composition: 2011 harvest was related with lower phenolic and volatile contents, as well as lower antiradical activity.For grapes collected at technologic maturity, analysis of variance-simultaneous component analysis (ASCA) was applied combining all the parameters under study, in order to assess the influence of harvest and parcel characteristics on each variety oenological potential. The results obtained using this comprehensive approach is closely related with those observed during maturation and revealed that harvest was the main factor that influenced grapes composition (53% to 68% of the total data set variance) followed by parcel characteristics, explaining ca. 15-19% of the total data set variance. The oenological potential of each variety may be different from one parcel to another, i.e., clay-sandy and clay-calcareous related-environments seem to favour Arinto and Bical white grapes composition, but for the red varieties, grapes composition was favoured by clayey and clay-calcareous soils. Besides, also higher altitude seems to favour Touriga Nacional grapes composition. Sauvignon Blanc seems to be a variety well adapted to the different parcel characteristics. In order to go forward in the valuation of these varieties, the aroma properties of 6 monovarietal wines were studied based on an aroma network-approach, linking molecular data related to volatile composition and aroma data about the key odor active molecules. This approach allowed to identify different wine aroma properties and to infer about the consumer’s sensory perception. It was found that aroma properties differ from one wine variety to another: while Arinto and Sauvignon Blanc wine exhibited higher tree fruity, sweety and flowery aromas, related essentially with ester compounds and C13 norisoprenoids, the opposite was obtained for Bical wine, corroborating the aroma sensory perceptions of the trained panel. Sauvignon Blanc also exhibited higher toasted aromas (related with thiols, mainly with 2-methyl-3-furanthiol). Touriga Nacional red wine exhibited higher tree, tropical, and berry fruits notes (sensory described as sweet fruits), toasted and flowery aromas, while these are similar for the other red wines under study. Besides Portuguese Bairrada wines, this aroma network approach is a tool that can be used to explain the aroma properties of wines worldwide. The grape and wine data generated under the present PhD thesis, in the context of Bairrada Appellation, shows the unique character of each variety, and may be used by growers and wine producers as a support for decisionmaking based on objective criteria, increasing the sustainability in this sector. For instance, it is possible to take advantage of the natural resources and produce products with different characteristics obtained from the same variety, minimizing costs during the winemaking process.

Organic contaminants in urban soils: major inputs and potential risks

Urban soil quality may be severely affected by hydrophobic organic contaminants (HOCs), impairing environmental quality and human health. A comprehensive study was conducted in two contrasting Portuguese urban areas (Lisbon and Viseu) in order to assess the levels and potential risks of these contaminants, to identify sources and study their behaviour in soils. The concentrations of HOCs were related to the size of the city, with much higher contamination levels observed in Lisbon urban area. Source apportionment was performed by studying the HOCs profiles, their relationship with potentially toxic elements and general characteristics of soil using multivariate statistical methods. Lisbon seems to be affected by nearby sources (traffic, industry and incineration processes) whereas in Viseu the atmospheric transport may be playing an important role. In a first tier of risk assessment (RA) it was possible to identify polycyclic aromatic hydrocarbons (PAHs) in Lisbon soils as a potential hazard. The levels of PAHs in street dusts were further studied and allowed to clarify that traffic, tire and pavement debris can be an important source of PAHs to urban soils. Street dusts were also identified as being a potential concern regarding human and environmental health, especially if reaching the nearby aquatic bodies. Geostatistical tools were also used and their usefulness in a RA analysis and urban planning was discussed. In order to obtain a more realistic assessment of risks of HOCs to environment and human health it is important to evaluate their available fraction, which is also the most accessible for organisms. Therefore, a review of the processes involved on the availability of PAHs was performed and the outputs produced by the different chemical methods were evaluated. The suitability of chemical methods to predict bioavailability of PAHs in dissimilar naturally contaminated soils has not been demonstrated, being especially difficult for high molecular weight compounds. No clear relationship between chemical and biological availability was found in this work. Yet, in spite of the very high total concentrations found in some Lisbon soils, both the water soluble fraction and the body residues resulting from bioaccumulation assays were generally very low, which may be due to aging phenomena. It was observed that the percentage of soluble fraction of PAHs in soils was found to be different among compounds and mostly regulated by soil properties. Regarding bioaccumulation assays, although no significant relationship was found between soil properties and bioavailability, it was verified that biota-to-soil bioaccumulation factors were sample dependent rather than compound dependent. In conclusion, once the compounds of potential concern are targeted, then performing a chemical screening as a first tier can be a simple and effective approach to start a RA. However, reliable data is still required to improve the existing models for risk characterization.

Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.