Tile-Based Two-Dimensional Phase Unwrapping for Digital Holography Using a Modular Framework

A variety of physical and biomedical imaging techniques, such as digital holography, interferometric synthetic aperture radar (InSAR), or magnetic resonance imaging (MRI) enable measurement of the phase of a physical quantity additionally to its amplitude. However, the phase can commonly only be measured modulo 2π, as a so called wrapped phase map. Phase unwrapping is the process of obtaining the underlying physical phase map from the wrapped phase. Tile-based phase unwrapping algorithms operate by first tessellating the phase map, then unwrapping individual tiles, and finally merging them to a continuous phase map. They can be implemented computationally efficiently and are robust to noise. However, they are prone to failure in the presence of phase residues or erroneous unwraps of single tiles. We tried to overcome these shortcomings by creating novel tile unwrapping and merging algorithms as well as creating a framework that allows to combine them in modular fashion. To increase the robustness of the tile unwrapping step, we implemented a model-based algorithm that makes efficient use of linear algebra to unwrap individual tiles. Furthermore, we adapted an established pixel-based unwrapping algorithm to create a quality guided tile merger. These original algorithms as well as previously existing ones were implemented in a modular phase unwrapping C++ framework. By examining different combinations of unwrapping and merging algorithms we compared our method to existing approaches. We could show that the appropriate choice of unwrapping and merging algorithms can significantly improve the unwrapped result in the presence of phase residues and noise. Beyond that, our modular framework allows for efficient design and test of new tile-based phase unwrapping algorithms. The software developed in this study is freely available.

Electrolytes for ceramic oxide fuel cells

The main objective of this dissertation is the development and processing of novel ionic conducting ceramic materials for use as electrolytes in proton or oxide-ion conducting solid oxide fuel cells. The research aims to develop new processing routes and/or materials offering superior electrochemical behavior, based on nanometric ceramic oxide powders prepared by mechanochemical processes. Protonic ceramic fuel cells (PCFCs) require electrolyte materials with high proton conductivity at intermediate temperatures, 500-700ºC, such as reported for perovskite zirconate oxides containing alkaline earth metal cations. In the current work, BaZrO3 containing 15 mol% of Y (BZY) was chosen as the base material for further study. Despite offering high bulk proton conductivity the widespread application of this material is limited by its poor sinterability and grain growth. Thus, minor additions of oxides of zinc, phosphorous and boron were studied as possible sintering additives. The introduction of ZnO can produce substantially enhanced densification, compared to the un-doped material, lowering the sintering temperature from 1600ºC to 1300ºC. Thus, the current work discusses the best solid solution mechanism to accommodate this sintering additive. Maximum proton conductivity was shown to be obtained in materials where the Zn additive is intentionally adopted into the base perovskite composition. P2O5 additions were shown to be less effective as a sintering additive. The presence of P2O5 was shown to impair grain growth, despite improving densification of BZY for intermediate concentrations in the range 4 – 8 mol%. Interreaction of BZY with P was also shown to have a highly detrimental effect on its electrical transport properties, decreasing both bulk and grain boundary conductivities. The densification behavior of H3BO3 added BaZrO3 (BZO) shows boron to be a very effective sintering aid. Nonetheless, in the yttrium containing analogue, BaZr0.85Y0.15O3- (BZY) the densification behavior with boron additives was shown to be less successful, yielding impaired levels of densification compared to the plain BZY. This phenomenon was shown to be related to the undesirable formation of barium borate compositions of high melting temperatures. In the last section of the work, the emerging oxide-ion conducting materials, (Ba,Sr)GeO3 doped with K, were studied. Work assessed if these materials could be formed by mechanochemical process and the role of the ionic radius of the alkaline earth metal cation on the crystallographic structure, compositional homogeneity and ionic transport. An abrupt jump in oxide-ion conductivity was shown on increasing operation temperature in both the Sr and Ba analogues.

Relaciones y capacidades interorganizativas: un enfoque de Supply Chain Management (SCM) en red

El presente trabajo mide, en un contexto colaborativo, un conjunto de mecanismos relacionales interconectados y su incidencia en el performance organizacional. Apoyado en la Visión Relacional (Dyer y Singh, 1998), el trabajo integra mecanismos de las capacidades relacionales y capacidades competitivas en el concepto denominado ¿capacidades interorganizativas¿. Las capacidades interorganizativas se componen de la ¿confianza¿ y los mecanismos ¿combinar recursos complementarios¿, ¿invertir en activos específicos¿, ¿compartir información¿ y ¿solucionar problemas conjuntamente¿. La medición tiene lugar en la Industria Alimentaria (IA) española en un contexto de Supply Chain Management1 en red. Además de mejorar el conocimiento sobre las relaciones interorganizativas, el trabajo también realiza una revisión teórica sobre el sector agroalimentario en general y la IA en particular. Los resultados permiten confirmar, con excepciones, el constructo teórico de las ¿capacidades interorganizativas en un contexto de Supply Chain Management en red¿. Otros resultados obtenidos son los altos niveles de confianza en las relaciones entre socios y una industria que, pese al entorno competitivo y complejo actual, presenta niveles competitivos en términos de flexibilidad, respuesta, calidad y eficiencia. De igual modo, la investigación descubre la implantación de la capacidad de las empresas de la industria para gestionar el conocimiento. En este contexto, los resultados parecen indicar una correcta integración de la cadena de suministros de la IA que confirman la efectiva aplicación de la Supply Chain Management. Otras conclusiones obtenidas son la dependencia que ha tenido y tiene la industria alimentaria española de la distribución, intensificada en parte por la expansión de las marcas del distribuidor (MDDs).

A utilização dos recursos educativos digitais- RED : na prática de ensino supervisionada no 1.º CEB

O presente artigo tem como objetivo refletir sobre o impacto das TIC em contexto educativo, focando os potenciais contributos da utilização dos Recursos Educativos Digitais (RED) no processo de ensino e de aprendizagem. Para o efeito, são apresentados os resultados da utilização do RED: Aula Digital - O Mundo da Carochinha 1.º Ano. O estudo foi concretizado numa turma do 1.° ano de escolaridade do 1.º CEB, constituída por 27 alunos, com idades e compreendidas entre os 6-7 anos, num Agrupamento de Escolas da Cidade de Castelo Branco, no âmbito da Prática de Ensino Supervisionada. Os resultados obtidos, após a análise e tratamento dos dados, permitiram concluir que ao utilizar este RED os alunos demonstraram terem adquirido os conteúdos abordados, pelo facto de se terem potenciado níveis de maior interesse, empenho, motivação, envolvimento e espírito de iniciativa no decorrer das atividades propostas. Porém, talvez pelo facto de serem alunos de 1º ano do 1º CEB, não descuram a presença e o acompanhamento da professora e a utilização de recursos em suporte papel. Quer isto dizer que deve haver uma complementaridade que concilie o fator humano (professora), com a utilização de recursos em suporte digital (RED) e recursos em suporte papel (Manual). Traduzindo, desta forma, uma rentabilização dos recursos pedagógicos conducentes a uma melhoria do processo de ensino e de aprendizagem.

Efecto de la adición de biosólido (seco) a una pasta cerámica sobre la resistencia mecánica de ladrillos

Se adicionó biosólido como componente de una pasta cerámica para la fabricación de ladrillos. Se caracterizaron las materias primas (arcilla y biosólido) en cuanto a composición química, fases mineralógicas, comportamiento térmico y características físicas. Se fabricaron ladrillos con hasta un 15 % de inclusión de biosólido en estado seco, de dimensiones estándar según Norma Técnica Colombiana (NTC) 296 y cocidos a temperaturas de 950 °C, 1000 °C y 1050 °C. Se realizaron pruebas de resistencia a la compresión bajo los lineamientos de la NTC 4017, con el fin de evaluar el efecto que sobre esta propiedad tiene la cantidad porcentual de adición del biosólido. Desde el punto de vista ambiental se evaluó la inocuidad de los metales presentes en el biosólido, desarrollando la prueba Toxicity Characteristic Leaching Procedure (TCLP) en ladrillos fabricados con adición del residuo.

Ceramic Materials Development for Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC)

Solid oxide fuel cell (SOFC) is an electrochemical device that converts chemical energy into electric power with high efficiency. Traditional SOFC has its disadvantages, such as redox cycling instability and carbon deposition while using hydrocarbon fuels. It is because traditional SOFC uses Ni-cermet as anode. In order to solve these problems, ceramic anode is a good candidate to replace Ni. However, the conductivity of most ceramic anode materials are much lower than Ni metal, and it introduces high ohmic resistance. How to increase the conductivity is a hot topic in this research field. Based on our proposed mechanism, several types of ceramic materials have been developed. Vanadium doped perovskite, Sr1-x/2VxTi1-xO3 (SVT) and Sr0.2Na0.8Nb1-xVxO3 (SNNV), achieved the conductivity as high as 300 S*cm-1 in hydrogen, without any high temperature reduction. GDC electrolyte supported cell was fabricated with Sr0.2Na0.8Nb0.9V0.1O3 and the performance was measured in hydrogen and methane respectively. Due to vanadium’s intrinsic problems, the anode supported cell is not easy. Fe doped double perovskite Sr2CoMoO6 (SFCM) was also developed. By carefully doping Fe, the conductivity was improved over one magnitude, without any vigorous reducing conditions. SFCM anode supported cell was successfully fabricated with GDC as the electrolyte. By impregnating Ni-GDC nano particles into the anode, the cell can be operated at lower temperatures while having higher performance than the traditional Ni-cermet cells. Meanwhile, this SFCM anode supported SOFC has long term stability in the reformate containing methane. During the anode development, cathode improvement caused by a thin Co-GDC layer was observed. By adding this Co-GDC layer between the electrolyte and the cathode, the interfacial resistance decreases due to fast oxygen ion transport. This mechanism was confirmed via isotope exchange. This Co-GDC layer works with multiple kinds of cathodes and the modified cell’s performance is 3 times as the traditional Ni-GDC cell. With this new method, lowering the SOFC operation temperature is feasible.

Criação e exploração de RED por alunos com NEE

A utilização das Tecnologias da Informação e Comunicação na educação é incontornável na sociedade da comunicação e do conhecimento. E, é neste pressuposto que propomos abordar a sua utilização no domínio da Educação Especial. Tendo em conta a necessidade de proceder a uma prática educativa centrada no aluno e nas suas especificidades, pareceu-nos pertinente abordar a questão da construção e exploração de Recursos Educativos Digitais (RED) com alunos com Necessidades Educativas Especiais (NEE). Com este estudo procurámos compreender como a construção de RED contribui para o envolvimento na aprendizagem destes alunos. A partir desta finalidade, estabelecemos três objetivos gerais. (1) Desenvolver RED adaptados ao desenvolvimento cognitivo dos alunos, (2) envolver outros intervenientes educativos como os pais e outros professores de educação especial do agrupamento de escolas e (3) compreender como os RED contribuem para o desenvolvimento cognitivo e a autonomia dos alunos. Para alcançar os objetivos propostos, desenhámos um projeto de investigação que se baseia num estudo de casos múltiplos e realizado numa escola no distrito de Vila Real. Com estes alunos, foram construídos diversos RED, que procuraram ter em conta as suas características e as aprendizagens previstas nos seus Currículos Específicos Individuais. Nesta construção, foi utilizado o JClic, e neste processo os casos participaram de uma forma ativa. A resolução das atividades foi feita em situação de observação sistemática, com recurso a grelhas, em que se tiveram em conta aspetos como a autonomia, a motivação, a realização, a empatia, o tempo despendido e o número de tentativas. Os dados da observação menos sistemática deram origem a notas de campo que foram registadas no diário do investigador. Para triangular os dados provenientes das técnicas referidas, foi realizada ainda uma entrevista à docente de Educação Especial dos alunos estudados. As principais conclusões da nossa investigação revelam que o envolvimento dos casos na construção dos recursos foi extraordinariamente importante em termos motivacionais e na empatia. A observação sistemática permitiu-nos também demonstrar que a autonomia, a realização, o tempo despendido e o número de tentativas foram indicadores que revelaram melhorias ao longo das sessões de trabalho. Constatamos ainda, através da entrevista, que alguns dos ganhos decorrentes das tarefas propostas foram transferidos para outras situações, quer na escola quer em casa.

A review on systematic and taxonomic of the Persian Gulf fish species, based on geographical distribution pattern and habitat diversity, using by GIS

During the period from 2011 - 2015 with the aim of this study was to systematically review and in particular the revised classification of the Persian Gulf (and the Strait of Hormuz) and to obtain new information about the final confirmed list of fish species of Iranian waters of the Persian Gulf (and Hormuz Strait), samples of museums, surveys and sampling, and comparative study of all available sources and documentation was done. Classification systematic of sharks and batoids and bony fishes. Based on the results, the final list of approved fish of the Persian Gulf (including the Strait of Hormuz and Gulf of Oman border region) are 907 species in 157 families, of which 93 species of fish with 28 cartilaginous families (including 18 families with 60 species and 10 families with 34 species of shark and batoids); and 129 families with 814 species of bony fishes are. The presence of 11 new family with only one representative species in the area include Veliferidae, Zeidae, Sebastidae, Stomiidae, Dalatiidae, Zanclidae, Pempheridae, Lophiidae Kuhliidae, Etmoptridae and Chlorophthalmidae also recently introduced and approved. The two families based Creediidae Clinidae and their larvae samples for newly identified area. 62 families with mono-species and 25 families with more than 10 species are present including Gobiidae (53), Carangide (48), Labride (41), Blenniidae (34), Apogonidae (32) and Lutjanidae (31) of bony fishes, Carcharhinidae (26) of sharks and Dasyatidae (12) in terms of number of species of batoids most families to have their data partitioning. Also, 13 species as well as endemic species introduced the Persian Gulf and have been approved in terms of geographical expansion of the Persian Gulf are unique to the area.Two species of the family Poeciliidae and Cyprinodontidae have species of fresh water to the brackish coastal habitats have found a way;in addition to 11 types of families Carcharhinidae, Clupeidae, Chanidae, Gobidae, Mugilidae, Sparidae also as a species, with a focus on freshwater river basins in the south of the country have been found. In this study, it was found that out of 907 species have been reported from the study area, 294 species (32.4 %) to benthic habitats (Benthic habitats) and 613 species (67.6 %) in pelagic habitats (Pelagic habitats) belong. Coral reefs and rocky habitats in the range of benthic fish (129 species - 14.3 %) and reef associated fishes in the range of pelagic fishes (432 species – 47.8 %), the highest number and percentage of habitat diversity (Species habitats) have been allocated. As well as fish habitats with sea grass and algae beds in benthic habitat (17 species- 1.9 %) and pelagic - Oceanic (Open sea) in the whole pelagic fish (30 species – 3.3 %), the lowest number and percentage of habitat diversity into account. From the perspective of animal geography (Zoogeography) and habitat overlaps and similarities (Habitat overlapping) fish fauna of the Persian Gulf compared with other similar seas (tropical and subtropical, and warm temperate) in the Indian Ocean area - calm on the surface, based on the presence of certain species that the fish fauna of the Persian Gulf to the Red Sea and the Bay of Bengal (East Arabian Sea) compared to other regions in the Indian Ocean (Pacific) is closer (about 50%), and the Mediterranean (East area) and The Hawaiian Islands have the lowest overlap and similarity of habitat and species (about 10%).

Response toolkit to provide an active response against intrusions using Ontology-Based IRS

Los sistemas de respuesta activa tienen por objetivo ejecutar una respuesta en contra de una intrusión de forma automática. Sin embargo, ejecutar una respuesta automáticamente no es una tarea trivial ya que el costo de ejecutar una respuesta podría ser más grande que el efecto que cause la intrusión propiamente dicha. También, el sistema debe contar con un amplio conjunto de acciones de respuesta y un algoritmo que seleccione la respuesta óptima. Este artículo propone un toolkit de respuestas que será integrado a un IRS basado en Ontologías para permitir la ejecución automática de la mejor respuesta cuando una intrusión es detectada. Se presenta un conjunto de respuestas basadas en host y basadas en red que pueden ser ejecutadas por el IRS, dicha ejecución es llevada a cabo mediante agentes basados en plugins que han sido distribuidos en la red. Finalmente, se realiza la verificación del sistema propuesto, tomando como caso de uso un ataque de defacement obteniéndose resultados satisfactorios.

Host-guest chemistry of solid coordination frameworks (SCFs) based on Copper(II)-Pyridine Ligands

283 p.

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais

There are ores of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous contents in the technological structural ceramics area, seeking to determine a maximum permissible calcareous proportion/contents in the ceramic mass using the patterns of the local industry production. For the consecution of this paper, it was characterized the clay and calcareous material by FRX, DRX, TGA and DTA. It was also configurated by extrusion and burnt in the temperatures of 850°C, 900°C, 950°C and 1000°C pieces of the corpus with 0, 5, 10, 15 e 20% of calcareous proportion. After that, it was carried out technological samples of linear retraction, water absortion, apparent porosity, specific apparent mass and mechanic resistance. The results showed the possibility of using calcareous in the ceramic mass and in some cases the technological properties got better

Diseño e implementación de un sistema de monitoreo de la condición de alimentación de las estaciones de la red sísmica del Austro

En el presente documento se diseña e implementa un controlador de carga de baterías a pulsos, el cual está basado en el circuito integrado BQ24650 de National Instruments, para mejorar el sistema de alimentación de las estaciones sísmicas de la Red Sísmica del Austro. Además, se ha desarrollado un sistema de monitoreo de los niveles de tensión del panel solar y la batería. Esta información será transmitida a través de un radio enlace analógico existente en la RSA, usando el ancho de banda no ocupado del sistema analógico de transmisión de información sísmica, sin alterar, perturbar o añadir ruido al sistema. Posteriormente esta información será visualizada y almacenada en una base de datos en las oficinas de la RSA en la ciudad de Cuenca.

Influência da gipsita no surgimento de eflorescência em telhas cerâmicas

The red ceramic industry is recognized as of major importance in Piauí State. The State capital, Teresina, is the greatest producer of this material ( production about 18 million peaces), which is used mainly for masonry sealing blocks. One of the most frequent problems in this kind of products is the efflorescence. This work has the main objective of studying the influence of gypsum addition on non-glazed tiles, by using the local industry production standards. The raw materials were characterized by FRX, DRX, TGA, DTA and AD. Extruded test specimens were made with the addition of 1, 3 and 5% of gypsum in the ceramic paste, burned at 850oC, 950oC and 1050oC and submitted to further technological tests and microestrutural analysis by the scanning electron microscope. In order to accelerate the aging of bodies of evidence, they were immersed in successive water baths and posterior drying. The reference ceramic paste showed tendency to efflorescence formation after drying and consolidated efflorescence after burning, but no affecting the technological results

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated