Efeito da presença de outros metais na remoção de mercúrio com cortiça

O Homem sempre utilizou processos produtivos com o intuito de satisfazer as suas necessidades básicas. Com o aumento da população mundial, atualmente superior a sete mil milhões de indivíduos, a quantidade de resíduos produzidos pela atividade humana, através da atividade industrial e descarga de resíduos domésticos e agrícolas, tomou dimensões desmesuradas, que são responsáveis por gerar um elevado volume de resíduos contendo diversos elementos e compostos prejudiciais ao ambiente, e, consequentemente, para a saúde humana, entre os quais se incluem alguns metais. O presente trabalho tem como principais objetivos estudar a remoção de mercúrio pela cortiça em águas sintéticas (agua MilliQ) e naturais (água de abastecimento público), na presença de outros metais (Cd, Pb e Cu) e avaliar a influência destes metais no processo de remoção. Os resultados permitiram verificar que 2,5mg/L de cortiça é uma quantidade adequada para remover mercúrio de uma solução com concentração inicial de 50μg/L de metal (percentagem de remoção de 70%), na ausência de outros contaminantes (cádmio, chumbo e cobre). Nestas condições, a quantidade máxima de mercúrio removido pela cortiça após 96 horas de contacto foi de 11,6mg de mercúrio por grama de cortiça. A presença de chumbo e cobre ou uma mistura deles reduziu a taxa de remoção de mercúrio pela cortiça e a velocidade inicial de remoção; a presença de cádmio afetou a velocidade inicial de remoção. Mesmo com a adição de outros contaminantes, como cádmio, chumbo e cobre e na presença de água de abastecimento público, observou-se que a cortiça apresenta capacidade de remoção de mercúrio. O modelo de pseudo segunda ordem foi o que apresentou um melhor ajuste aos resultados obtidos e o processo de remoção de mercúrio pela cortiça aparenta ser controlado quer pela difusão no filme quer pela difusão no poro.

Thick-microstructures for MPGDs: simulations and experimental studies

Cherenkov Imaging counters require large photosensitive areas, capable of single photon detection, operating at stable high gains under radioactive backgrounds while standing high rates, providing a fast response and a good time resolution, and being insensitive to magnetic fields. The development of photon detectors based in Micro Pattern Gaseous detectors (MPGDs), represent a new generation of gaseous photon detectors. In particular, gaseous detectors based on stacked Thick-Gaseous Electron Multipliers (THGEMs), or THGEM based structures, coupled to a CsI photoconverter coating, seem to fulfil the requirements imposed by Cherenkov imaging counters. This work focus on the study of the THGEM-based detectors response as function of its geometrical parameters and applied voltages and electric fields, aiming a future upgrade of the Cherenkov Imaging counter RICH-1 of the COMPASS experiment at CERN SPS. Further studies to decrease the fraction of ions that reach the photocathode (Ion Back Flow – IBF) to minimize the ageing and maximize the photoelectron extraction are performed. Experimental studies are complemented with simulation results, also perfomed in this work.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Bauxite residue (Red mud) as a pulverised fuel ash substitute in the manufacture of lightweight aggregate

This study looked at the potential of bauxite residue or red mud to be used in the manufacture of lightweight aggregate in replacement of pulverised fuel ash (PFA), commonly used as a way of recycling problematic wastes. The percentage replacements of red mud with PFA were as follows: 25, 31, 38, 44 and 50%. These were blended in a mix with waste excavated clay and sewage sludge – all from the Chongqing municipality in China. Lightweight pellets were produced using a Trefoil rotary kiln and were sintered to 1200 °C. Results showed that 44 % bauxite residue replacement produced lightweight pellets with the highest compressive strength, highest density and largest water holding capacity. This would be expected in materials with a low level of silicates, which causes insufficient glass phase viscosity and therefore poor bloating during firing; producing an aggregate with a higher density but with open pores that allowed for larger water absorption. All ratios of red mud aggregates were significantly reduced in pH after firing to around pH 8, and this reduced the leachability of the aggregates to levels below those set by the European landfill directive (2003/33/EC).

Bio-removal of toxic metals by metal resistant anaerobic bacteria: molecular characterization and performance studies

Tese de dout., Ciências Biotecnológicas (Biotecnologia Ambiental), Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2010

Antioxidant and phenolic compounds in sweet potato peels and leaves: food applications and health benefits

Tese de doutoramento, Ciências Biotecnológicas (Biotecnologia Alimentar), Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Recomendaciones para el uso del yoduro de potasio (KI por su fórmula química) durante una situación de emergencia en una planta nuclear

This paper written in Spanish gives information about radioactive materials and safety during a nuclear power plant emergency.

Radiological protection and nuclear engineering studies in multi-MW target systems

Tese de doutoramento, Física, Universidade de Lisboa, Faculdade de Ciências, 2014

Péptidos para a detecção de agregados de alfa-sinucleína

Tese de mestrado, Química Farmacêutica e Terapêutica, Universidade de Lisboa, Faculdade de Farmácia, 2013

Nanoporous carbons from sisal residues and their application in hybrid TiO2/carbon photocatalysts for the removal and degradation of phenol in solution

Tese de doutoramento, Química (Química Tecnológica), Universidade de Lisboa, Faculdade de Ciências, 2016

Sustainable Chemical Regulation in a Global Environment

The globalisation and unintended impacts of chemicals sets substantial challenges for sustainable development and the protection of natural resources such as land and water. Currently, there are three key chemical Conventions, the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal which came into force in 1992, the 1993 Rotterdam Convention on Trade in Dangerous Chemicals and the Stockholm Convention on Persistent Organic Pollutants (POPs) (2004). These Conventions have as common features a mechanism for assessment of chemical safety, a process for the addition of new chemicals to a list of controlled substances and capacity building in developed countries. However, they only cover a small fraction of the chemicals manufactured and traded across the world. Defining effective regulation of chemicals is an on-going debate that has the potential to have a significant impact on vested commercial and political interests. A sustainable chemical industry should take account of evidence-based standards and through legal mechanisms adopt long-term precautionary evaluations rather than short-term market driven decisions. It is argued in this paper that effective international chemical regulation in the future will come from the adoption of sound chemical management and corporate social responsibility, but it recognised that this will face the challenge of economic disparity between countries and the potential export of regulatory risk from big chemical conglomerates to poorly regulated jurisdictions.

A generic model for integration of Quality, Environment and Safety Management Systems

Purpose – The purpose of this paper is to propose a generic model of Integrated Management System of Quality, Environment and Safety (IMS-QES) that can be adapted and progressively to assimilate various Management Systems, of which highlights: ISO 9001 for Quality; ISO 14001 for Environment; OHSAS 18001 for Occupational Health and Safety. Design/methodology/approach – The model was designed in the real environment of a Portuguese Organization and 160 employees were surveyed. The rate response was equal to 86 percent. The conceived model was implemented in a first phase for the integration of Quality, Environment and Safety Management Systems. Findings – Among the main findings of the survey the paper highlights: the elimination of conflicts between individual systems with resources optimization; creation of added value to the business by eliminating several types of wastes; the integrated management of sustainability components in a global market; the improvement of partnerships with suppliers of goods and services; reducing the number of internal and external audits. Originality/value – This case study is one of the first Portuguese empirical researches about IMS-QES and the paper believes that it can be useful in the creation of a Portuguese guideline for integration, namely the Quality Management Systems; Environmental Management Systems and Occupational Health and Safety Management Systems among others.

Gaseificação de resíduos: uma alternativa de gestão de resíduos sólidos urbanos na Região Autónoma dos Açores

Dissertação de Mestrado, Ambiente, Saúde e Segurança, 18 de Fevereiro de 2011, Universidade dos Açores.

Avaliação da cinetica bacteriana na biolixiviação de calcopirita

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Management of agricultural waste on a sample of farms on the island of São Miguel (Açores)

Dissertação de Mestrado em Ambiente, Saúde e Segurança.