Student teachers' experiences of initial teacher preparation in England:Core themes and variation

Drawing on data generated via large-scale survey and in-depth interview methods, this article reports findings which show that being a student teacher in early-twenty-first-century England is a demanding personal experience which requires considerable engagement and commitment in the face of built-in challenges and risks, and which engenders, for many, highly charged affective responses. Student teachers are centrally concerned during this time with their (changing) identities, their relationships with others and the relevance of course provision. Findings also indicate that, in some respects, student teachers’ accounts of their experiences are systematically differentiated according to a number of factors, notably the initial teacher preparation route being followed, their age, and their prior conceptions and expectations of teaching and of learning to teach. These findings are situated in the broader literature on teacher development and some implications for teacher educators are discussed. © 2008 Taylor & Francis

SN 2009ip á la PESSTO:No evidence for core-collapse yet

We present observations of the interacting transient SN 2009ip, from the start of the outburst in October 2012 until the end of the 2012 observing season. The transient reached a peak of $M_V$=-17.7 mag before fading rapidly, with a total integrated luminosity of 1.9$\times10^{49}$ erg over the period of August-December 2012. The optical and near infrared spectra are dominated by narrow emission lines, signaling a dense circumstellar environment, together with multiple components of broad emission and absorption in H and He at velocities between 0.5-1.2$\times10^4$ km s$^{-1}$\. We see no evidence for nucleosynthesized material in SN 2009ip, even in late-time pseudo-nebular spectra. We set a limit of $

Octavius 4D characterization for flattened and flattening filter free rotational deliveries

Purpose: In this study the Octavius detector 729 ionization chamber (IC) array with the Octavius 4D phantom was characterized for flattening filter (FF) and flattening filter free (FFF) static and rotational beams. The device was assessed for verification with FF and FFF RapidArc treatment plans.

Methods: The response of the detectors to field size, dose linearity, and dose rate were assessed for 6 MV FF beams and also 6 and 10 MV FFF beams. Dosimetric and mechanical accuracy of the detector array within the Octavius 4D rotational phantom was evaluated against measurements made using semiflex and pinpoint ionization chambers, and radiochromic film. Verification FF and FFF RapidArc plans were assessed using a gamma function with 3%/3 mm tolerances and 2%/2 mm tolerances and further analysis of these plans was undertaken using film and a second detector array with higher spatial resolution.

Results: A warm-up dose of >6 Gy was required for detector stability. Dose-rate measurements were stable across a range from 0.26 to 15 Gy/min and dose response was linear, although the device overestimated small doses compared with pinpoint ionization chamber measurements. Output factors agreed with ionization chamber measurements to within 0.6% for square fields of side between 3 and 25 cm and within 1.2% for 2 x 2 cm(2) fields. The Octavius 4D phantom was found to be consistent with measurements made with radiochromic film, where the gantry angle was found to be within 0.4. of that expected during rotational deliveries. RapidArc FF and FFF beams were found to have an accuracy of >97.9% and >90% of pixels passing 3%/3 mm and 2%/2 mm, respectively. Detector spatial resolution was observed to be a factor in determining the accurate delivery of each plan, particularly at steep dose gradients. This was confirmed using data from a second detector array with higher spatial resolution and with radiochromic film.

Conclusions: The Octavius 4D phantom with associated Octavius detector 729 ionization chamber array is a dosimetrically and mechanically stable device for pretreatment verification of FF and FFF RapidArc treatments. Further improvements may be possible through use of a detector array with higher spatial resolution (detector size and/or detector spacing). (C) 2013 American Association of Physicists in Medicine.

Identifying cell class specific losses from serially generated electroretinogram components

Purpose. Processing of information through the cellular layers of the retina occurs in a serial manner. In the electroretinogram (ERG), this complicates interpretation of inner retinal changes as dysfunction may arise from "upstream" neurons or may indicate a direct loss to that neural generator. We propose an approach that addresses this issue by defining ERG gain relationships.

Methods. Regression analyses between two serial ERG parameters in a control cohort of rats are used to define gain relationships. These gains are then applied to two models of retinal disease.

Results. The PIIIamp to PIIamp gain is unity whereas the PIIamp to pSTRamp and PIIamp to nSTRamp gains are greater than unity, indicating "amplification" (P <0.05). Timing relationships show amplification between PIIIit to PIIit and compression for PIIit to pSTRit and PIIit to nSTRit, (P <0.05). Application of these gains to ?-3-deficiency indicates that all timing changes are downstream of photoreceptor changes, but a direct pSTR amplitude loss occurs (P <0.05). Application to diabetes indicates widespread inner retinal dysfunction which cannot be attributed to outer retinal changes (P <0.05).

Conclusions. This simple approach aids in the interpretation of inner retinal ERG changes by taking into account gain characteristics found between successive ERG components of normal animals.

Asynchrony between the Greenland ice core chronology and the radiocarbon calibration curve? Evidence from Irish bogs

A significant cold event, deduced from the Greenland ice cores, took place between 8200 and 8000 cal. BP. Modeling of the event suggests that higher northern latitudes would have also experienced considerable decreases in precipitation and that Ireland would have witnessed one of the greatest depressions. However, no well-dated proxy record exists from the British Isles to test the model results. Here we present independent evidence for a phase of major pine recruitment on Irish bogs at around 8150 cal. BP. Dendrochronological dating of subfossil trees from three sites reveal synchronicity in germination across the region, indicative of a regional forcing, and allows for high-precision radiocarbon based dating. The inner-rings of 40% of all samples from the north of Ireland dating to the period 8500-7500 cal. BP fall within a 25-yr window. The concurrent colonization of pine on peatland is interpreted as drier conditions in the region and provides the first substantive proxy data in support of a significant hydrological change in the north of Ireland accompanying the 8.2 ka event. The dating uncertainties associated with the Irish pine record and the Greenland Ice Core Chronology 2005 (GICC05) do not allow for any overlap between the two. Our results indicate that the discrepancy could be an artifact of dating inaccuracy, and support a similar claim by Lohne et al. (2013) for the Younger Dryas boundaries. If real, this asynchrony will most likely have affected interpretations of previous proxy alignments.

Freehand core biopsy in breast cancer: an accurate predictor of tumour grade following neoadjuvant chemotherapy?

Core biopsy is an increasingly used technique in the pre-operative diagnosis of breast carcinoma, as it provides useful prognostic information with respect to tumour type and grade. Neoadjuvant chemotherapy is being used in the treatment of large and locally advanced breast cancers but little is known regarding the correlation between tumour histology on pre-treatment core biopsy and that in residual tumour following primary chemotherapy and surgery. This study aimed to evaluate the accuracy of core biopsy in predicting these features in patients treated with primary chemotherapy. One hundred and thirty-three patients with carcinoma of the breast diagnosed on clinical, radiological and cytological examination underwent core biopsy, followed by primary chemotherapy (with cyclophosphamide, vincristine, doxorubicin and prednisolone) and surgery. The false-negative rate for pre-treatment core biopsy was 14%, with 91% agreement between the grade demonstrated on core biopsy and that in the residual tumour following completion of chemotherapy. Tumour type in the residual post-chemotherapy tumour was predicted by core biopsy in 84%. This study suggests that pre-treatment core biopsy histology accurately predicts residual tumour histology following primary chemotherapy and surgery in patients with breast cancer. (C) 2002 Elsevier Science Ltd. All rights reserved.

The management of radial scars of the breast - does core biopsy help?

Purpose: To compare the effectiveness of fine needle aspiration cytology (FNAC) with core biopsy (CB) in the pre-operative diagnosis of radial scar (RS) of the breast.

Patients and methods: A retrospective analysis was made of all radial scars diagnosed on surgical histology over an 8-year period. Comparison was made between the results of different preoperative needle biopsy techniques and surgical histology findings.

Results: Forty of 47 patients with a preoperative radiological diagnosis of radial scar were included in this analysis. Thirty-eight patients had impalpable lesions diagnosed on mammography and two presented with a palpable lump. FNAC (n=17) was inadequate in 47% of patients, missed two co-existing carcinomas found in this group, and gave a false positive or suspicious result for malignancy in 4 patients. CB (n=23) suggested a RS in 15 patients, but only diagnosed 4 out of 7 co-existing carcinomas found in this group.

Conclusion: CB is more accurate than FNAC in the diagnosis of RS. However, these data demonstrate that CB may offer little to assist in the management of patients with RS. In summary, this paper advocates the use of CB in any lesion with a radiological suspicion of carcinoma and diagnostic excision of all lesions thought to be typical of RS on mammography.

Hybrid address spaces: A methodology for implementing scalable high-level programming models on non-coherent many-core architectures

This paper introduces hybrid address spaces as a fundamental design methodology for implementing scalable runtime systems on many-core architectures without hardware support for cache coherence. We use hybrid address spaces for an implementation of MapReduce, a programming model for large-scale data processing, and the implementation of a remote memory access (RMA) model. Both implementations are available on the Intel SCC and are portable to similar architectures. We present the design and implementation of HyMR, a MapReduce runtime system whereby different stages and the synchronization operations between them alternate between a distributed memory address space and a shared memory address space, to improve performance and scalability. We compare HyMR to a reference implementation and we find that HyMR improves performance by a factor of 1.71× over a set of representative MapReduce benchmarks. We also compare HyMR with Phoenix++, a state-of-art implementation for systems with hardware-managed cache coherence in terms of scalability and sustained to peak data processing bandwidth, where HyMR demon- strates improvements of a factor of 3.1× and 3.2× respectively. We further evaluate our hybrid remote memory access (HyRMA) programming model and assess its performance to be superior of that of message passing.

Rotational moulding of thermoplastic polyester urethanes

Various grades of Thermoplastic Polyurethane (TPU) supplied by Bayer were studied to determine their suitability for the rotational moulding process. Following grinding, parts were produced using a variety of peak internal air temperatures and cooling rates. The tensile and impact properties of these parts were then analysed and it was found that both the grade and moulding conditions had a large bearing on the quality and mechanical strength of the part produced.