Evaluation of Etest and macrodilution broth method for antifungal susceptibility testing of Candida sp strains isolated from oral cavities of AIDS patients

A comparison of the Etest and the reference broth macrodilution susceptibility test for fluconazole, ketoconazole, itraconazole and amphotericin B was performed with 59 of Candida species isolated from the oral cavities of AIDS patients. The Etest method was performed according to the manufacturer's instructions, and the reference method was performed according to National Committee for Clinical Laboratory Standards document M27-A guidelines. Our data showed that there was a good correlation between the MICs obtained by the Etest and broth dilution methods. When only the MIC results at ± 2 dilutions for both methods were considered, the agreement rates were 90.4% for itraconazole, ketoconazole and amphotericin B and 84.6% for fluconazole of the C. albicans tested. In contrast, to the reference method, the Etest method classified as susceptible three fluconazole-resistant isolates and one itraconazole-resistant isolate, representing four very major errors. These results indicate that Etest could be considered useful for antifungal sensitivity evaluation of yeasts in clinical laboratories.

Synthesis about a collaborative project on “Technology Assessment of Autonomous System

The project started in 2009 with the support of DAAD in Germany and CRUP in Portugal under the “Collaborative German-Portuguese University Actions” programme. One central goal is the further development of a theory of technology assessment applied to robotics and autonomous systems in general that reflects in its methodology the changing conditions of knowledge production in modern societies and the emergence of new robotic technologies and of associated disruptive changes. Relevant topics here are handling broadened future horizons and new clusters of science and technology (medicine, engineering, interfaces, industrial automation, micro-devices, security and safety), as well as new governance structures in policy decision making concerning research and development (R

Planeamento de uma estrada utilizando CCS Candy - Caso de estudo

O tema desta dissertação foi escolhido tendo em consideração a crescente necessidade de planeamento de empreitadas de construção de estradas, sendo um dos objetivos desta dissertação o de oferecer uma visão global do processo de planeamento da construção de uma estrada, focado apenas no fator tempo, recorrendo a ferramentas informáticas e utilizando um caso de estudo de uma estrada real e já construída. Inicialmente, faz-se uma breve descrição dos métodos de planeamento mais aplicados em planeamentos de projetos, bem como dos softwares a utilizar neste trabalho. De seguida, descreve-se o caso de estudo, indicando as suas características principais. Partindo-se deste caso real, com base no estudo do Projeto de Execução, determinam-se as atividades, as suas relações e dependências, definem-se equipas e frentes de trabalho e determinam-se os respetivos rendimentos. Após a obtenção dos rendimentos de todas as atividades, elabora-se o planeamento da estrada, focado apenas no fator tempo, recorrendo ao diagrama de Gantt e ao diagrama espaço-tempo, utilizando para isso softwares de referência no mercado, o Microsoft Project e o CCS Candy. Por fim, são apresentadas algumas das principais diferenças entre as duas ferramentas informáticas aplicadas, as conclusões gerais, assim como uma proposta de desenvolvimento futuro.

Desenvolvimento de programa em linguagem Matlab® para cálculo pelo método de elementos finitos

Para o projeto de qualquer estrutura existente (edifícios, pontes, veículos, máquinas, etc.) é necessário conhecer as condições de carga, geometria e comportamento de todas as suas partes, assim como respeitar as normativas em vigor nos países nos quais a estrutura será aplicada. A primeira parte de qualquer projeto nesta área passa pela fase da análise estrutural, onde são calculadas todas as interações e efeitos de cargas sobre as estruturas físicas e os seus componentes de maneira a verificar a aptidão da estrutura para o seu uso. Inicialmente parte-se de uma estrutura de geometria simplificada, pondo de parte os elementos físicos irrelevantes (elementos de fixação, revestimentos, etc.) de maneira a simplificar o cálculo de estruturas complexas e, em função dos resultados obtidos da análise estrutural, melhorar a estrutura se necessário. A análise por elementos finitos é a ferramenta principal durante esta primeira fase do projeto. E atualmente, devido às exigências do mercado, é imprescindível o suporte computorizado de maneira a agilizar esta fase do projeto. Existe para esta finalidade uma vasta gama de programas que permitem realizar tarefas que passam pelo desenho de estruturas, análise estática de cargas, análise dinâmica e vibrações, visualização do comportamento físico (deformações) em tempo real, que permitem a otimização da estrutura em análise. Porém, estes programas demostram uma certa complexidade durante a introdução dos parâmetros, levando muitas vezes a resultados errados. Assim sendo, é essencial para o projetista ter uma ferramenta fiável e simples de usar que possa ser usada para fins de projeto de estruturas e otimização. Sobre esta base nasce este projeto tese onde se elaborou um programa com interface gráfica no ambiente Matlab® para a análise de estruturas por elementos finitos, com elementos do tipo Barra e Viga, quer em 2D ou 3D. Este programa permite definir a estrutura por meio de coordenadas, introdução de forma rápida e clara, propriedades mecânicas dos elementos, condições fronteira e cargas a aplicar. Como resultados devolve ao utilizador as reações, deformações e distribuição de tensões nos elementos quer em forma tabular quer em representação gráfica sobre a estrutura em análise. Existe ainda a possibilidade de importação de dados e exportação dos resultados em ficheiros XLS e XLSX, de maneira a facilitar a gestão de informação. Foram realizados diferentes testes e análises de estruturas de forma a validar os resultados do programa e a sua integridade. Os resultados foram todos satisfatórios e convergem para os resultados de outros programas, publicados em livros, e para cálculo a mão feitos pelo autor.

A DCAP for the social and solidarity economy

This article presents a work-in-progress version of a Dublin Core Application Profile (DCAP) developed to serve the Social and Solidarity Economy (SSE). Studies revealed that this community is interested in implementing both internal interoperability between their Web platforms to build a global SSE e-marketplace, and external interoperability among their Web platforms and external ones. The Dublin Core Application Profile for Social and Solidarity Economy (DCAP-SSE) serves this purpose. SSE organisations are submerged in the market economy but they have specificities not taken into account in this economy. The DCAP-SSE integrates terms from well-known metadata schemas, Resource Description Framework (RDF) vocabularies or ontologies, in order to enhance interoperability and take advantage of the benefits of the Linked Open Data ecosystem. It also integrates terms from the new essglobal RDF vocabulary which was created with the goal to respond to the SSE-specific needs. The DCAP-SSE also integrates five new Vocabulary Encoding Schemes to be used with DCAP-SSE properties. The DCAP development was based on a method for the development of application profiles (Me4MAP). We believe that this article has an educational value since it presents the idea that it is important to base DCAP developments on a method. This article shows the main results of applying such a method.

Aquaponics System - An EPS@ISEP 2014 Spring Project

The goal of this project, one of the proposals of the EPS@ISEP 2014 Spring, was to develop an Aquaponics System. Over recent years Aquaponics systems have received increased attention due to its possibilities in helping reduce strain on resources within 1st and 3rd world countries. Aquaponics is the combination of Hydroponics and Aquaculture and mimics a natural environment in order to successfully apply and enhance the understanding of natural cycles within an indoor process. By using this knowledge of natural cycles it was possible to create a system with the capabilities similar to that of a natural environment with the benefits of electronic adaptions to enhance the overall efficiency of the system. The multinational team involved in its development was composed of five students, from five countries and fields of study. This paper covers their solution, involving overall design, the technology involved and the benefits it could bring to the current market. The team was able to achieve the final rendered Computer Aided Design (CAD) drawings, successfully performed all the electronic testing, and designed a solution under budget. Furthermore, the solution presented was deeply studied from the sustainability viewpoint and the team also developed a product specific marketing plan. Finally, the students involved in this project obtained new knowledge and skills.

Design and Development of a Solar Dryer for Microalgae Retrieval - An EPS@ISEP 2013 Spring Project

Currently excessive fossil fuel consumption has become a serious problem. People are searching for new solutions of energy production and there are several options to obtain alternative sources of energy without further devastating the already destroyed environment. One of these solutions is growing microalgae, from which biodiesel can be obtained. The microalgae production is a growing business because of its many useful compounds. In order to collect these compounds microalgae must first be harvested and then dried. Nowadays the solutions used for drying use too much energy and therefore are too expensive and not sustainable. The goal of this project, one of the possible choices during the EPS@ISEP 2013 Spring, was to develop a solar microalgae dryer. The multinational team involved in its development was composed of five students, from distinct countries and fields of study, and was the responsible for designing a solar microalgae dryer prototype for the microalgae laboratory of the chemical engineering department at ISEP, suitable for future tests and incorporating control process (in order not to destroy the microalgae during the drying process). The solar microalgae dryer was built to work as a distiller that gets rid of the excess water from the microalgae suspension. This paper presents a possible solution for this problem, the steps to create the device to harvest the microalgae by drying them with the use of solar energy (also used as an energy source for the solar dryer control system), the technologies used to build the solar microalgae dryer, and the benefits it presents compared to current solutions. It also presents the device from the ethical and sustainable viewpoint. Such alternative to already existing methods is competitive as far as energy usage is concerned.

Design and Implementation of a Biologically Inspired Flying Robot - An EPS@ISEP 2014 Spring Project

The goal of this EPS@ISEP project proposed in the Spring of 2014 was to develop a flapping wing flying robot. The project was embraced by a multinational team composed of four students from different countries and fields of study. The team designed and implemented a robot inspired by a biplane design, constructed from lightweight materials and battery powered. The prototype, called MyBird, was built with a 250 € budget, reuse existing materials as well as low cost solutions. Although the team's initial idea was to build a light radio controlled robot, time limitations along with setbacks involving the required electrical components led to a light but not radio controlled prototype. The team, from the experience gathered, made a number of future improvement suggestions, namely, the addition of radio control and a camera and the adoption of articulated monoplane design instead of the current biplane design for the wings.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper proposes the development of biologically inspired robots as the capstone project of the European Project Semester (EPS) framework. EPS is a one semester student centred international programme offered by a group of European engineering schools (EPS Providers) as part of their student exchange programme portfolio. EPS is organized around a central module (the EPS project) and a set of complementary supportive modules. Project proposals refer to open multidisciplinary real world problems. Its purpose is to expose students to problems of a greater dimension and complexity than those faced throughout the degree programme as well as to put them in contact with the socalled real world, in opposition to the academic world. Students are organized in teams, grouping individuals from diverse academic backgrounds and nationalities, and each team is fully responsible for conducting its project. EPS provides an integrated framework for undertaking capstone projects, which is focused on multicultural and multidisciplinary teamwork, communication, problem-solving, creativity, leadership, entrepreneurship, ethical reasoning and global contextual analysis. The design and development of biologically inspired robots allows the students to fulfil the previously described requirements and objectives and, as a result, we recommend the adoption of these projects within the EPS project capstone module for the benefit of engineering students.

Design and Implementation of a Biologically Inspired Swimming Robot - An EPS@ISEP 2014 Spring Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Development of Biomimetic Robots in the EPS Engineering Programme Capstone Project

This paper presents the development of a fish-like robot called Bro-Fish. Bro-Fish aims to be an educational toy dedicated to teaching mechanics, programming and the physics of floating objects to youngsters. The underlying intention is to awaken the interest of children for technology, especially biomimetic (biologically inspired) approaches, in order to promote sustainability and raise the level of ecological awareness. The main focus of this project was to create a robot with carangiform locomotion and controllable swimming, providing the opportunity to customize parts and experiment with the physics of floating objects. Therefore, the locomotion principles of fishes and mechanisms developed in related projects were analysed. Inspired by this background knowledge, a prototype was designed and implemented. The main achievement is the new tail mechanism that propels the robot. The tail resembles the undulation motion of fish bodies and is actuated in an innovative way, triggered by an elegant movement of a rotating helicoidal. First experimental tests revealed the potential of the proposed methodology to effectively generate forward propulsion.

Mental health promotion during pregnancy and early childhood : an action- research project in primary health care

ABSTRACT – Background: Primary Health Care (PHC) is usually the first contact with the health system, and health professionals are key mediators for enabling citizens to take care of their health. In Portugal, great improvements have been achieved in the biometric indicators of maternal and child health during the last decades. Nevertheless, scant attention has been paid to the mental health dimension, in spite of the recognition of its importance, being pregnancy and early childhood crucial opportunities in the lifecycle for mental health promotion, especially in the early years of life, with a strong impact in the health of the child. The impact of early attachment between mother and baby on maternal and child health has long been recognized. This attachment can be influenced by some factors, as the mother’s emotional adjustment. Attention to these factors may facilitate implementation of both positive conditions and preventative measures. Family support during the transition to parenthood has been highlighted as an effective measure and PHC professionals are in a privileged position as information sources as well as mediators. Aims: The project we present describes an action-research process developed together among academic researchers and health professionals to embrace these issues. We intend to enable health professionals to support families in the transition to parenthood thereby promoting children’s mental health. Approach: The project is driven by a participatory approach intended to lead to reorganization of health care during pregnancy and early childhood. Effective change happens when those involved are interested and motivated, what makes their participation so important. Reflection about current practices and needs, and knowledge about evidence-based interventions have been guiding the selection of changes to introduce in clinical practice for family support and development of parenthood skills and self-confidence. Development: We summarize the main steps in development: the initial assessment and the picture taken from the community under study; the decision making process; the training programme of PHC professionals in action; the review of the protocols of maternal consultation, home visits and antenatal education; the implementation planning; the plan for evaluation the effectiveness of the changes introduced in the delivery of maternal and child health care units. The already developed work has shown that motivation, leadership and organizational issues are decisive for process development.-------------------------- RESUMO - Os Cuidados de Saúde Primários são habitualmente o primeiro contacto com o sistema de saúde e os profissionais de saúde são mediadores chave na capacitação dos cidadãos para cuidarem da sua saúde. Em Portugal, nas últimas décadas, têm-se alcançado grandes melhorias nos indicadores biométricos de saúde materno-infantil. Contudo, tem-se dedicado pouca atenção à dimensão de saúde mental, apesar do reconhecimento da sua importância. A gravidez e primeira infância têm sido apontadas como uma oportunidade crucial no ciclo de vida para a promoção da saúde mental. É dado especial enfoque aos primeiros tempos de vida, dado o forte impacto na saúde da criança. O impacte da vinculação precoce entre a mãe e o bebé na saúde da mãe e da criança há muito que é reconhecido. Esta vinculação pode ser influenciada por vários factores, nomeadamente pelo ajustamento emocional da mãe. A focalização nestes aspectos pode facilitar a criação de condições favoráveis e a implementação de medidas preventivas. O suporte familiar durante o período de transição para a parentalidade tem sido enfatizado como uma medida eficaz e os Cuidados de Saúde Primários estão numa posição privilegiada como fontes de informação e como mediadores. O projecto que apresentamos descreve um processo de investigação- acção desenvolvido em parceria entre investigadores académicos e profissionais de saúde para abordar os aspectos referidos. Pretende-se capacitar os profissionais de saúde para apoiarem as famílias na transição para a parentalidade, promovendo assim a saúde mental das crianças. O projecto baseia-se numa abordagem participativa, direccionada para a reorganização dos cuidados durante a gravidez e primeiros tempos de vida. A mudança efectiva acontece quando os envolvidos estão interessados e motivados, o que torna a sua participação tão importante. A reflexão acerca das práticas e necessidades actuais e o conhecimento acerca de intervenções baseadas na evidência têm guiado a selecção das alterações a introduzir na prática clínica, no sentido de promover o suporte familiar e o desenvolvimento de competências parentais e auto-confiança. Neste artigo, apresentamos as etapas principais do desenvolvimento do projecto: avaliação inicial da comunidade em estudo; processo de tomada de decisão; programa de formação dos profissionais dos Cuidados de Saúde Primários; revisão dos protocolos da consulta de saúde materna, visita domiciliária e educação pré-natal; planeamento da implementação; plano de avaliação da efectividade das alterações introduzidas na prestação de cuidados. O trabalho já desenvolvido tem mostrado que a motivação, liderança e aspectos

Distributed Forest Fire Monitoring Using Wireless Sensor Networks

Disaster management is one of the most relevant application fields of wireless sensor networks. In this application, the role of the sensor network usually consists of obtaining a representation or a model of a physical phenomenon spreading through the affected area. In this work we focus on forest firefighting operations, proposing three fully distributed ways for approximating the actual shape of the fire. In the simplest approach, a circular burnt area is assumed around each node that has detected the fire and the union of these circles gives the overall fire’s shape. However, as this approach makes an intensive use of the wireless sensor network resources, we have proposed to incorporate two in-network aggregation techniques, which do not require considering the complete set of fire detections. The first technique models the fire by means of a complex shape composed of multiple convex hulls representing different burning areas, while the second technique uses a set of arbitrary polygons. Performance evaluation of realistic fire models on computer simulations reveals that the method based on arbitrary polygons obtains an improvement of 20% in terms of accuracy of the fire shape approximation, reducing the overhead in-network resources to 10% in the best case.

Disposable immunosensor using a simple method for oriented antibody immobilization for label-free real-time detection of an oxidative stress biomarker implicated in cancer diseases

This work proposes a novel approach for a suitable orientation of antibodies (Ab) on an immunosensing platform, applied here to the determination of 8-hydroxy-2′-deoxyguanosine (8OHdG), a biomarker of oxidative stress that has been associated to chronic diseases, such as cancer. The anti-8OHdG was bound to an amine modified gold support through its Fc region after activation of its carboxylic functions. Non-oriented approaches of Ab binding to the platform were tested in parallel, in order to show that the presented methodology favored Ab/Ag affinity and immunodetection of the antigen. The immunosensor design was evaluated by quartz-crystal microbalance with dissipation, atomic force microscopy, electrochemical impedance spectroscopy (EIS) and square-wave voltammetry. EIS was also a suitable technique to follow the analytical behavior of the device against 8OHdG. The affinity binding between 8OHdG and the antibody immobilized in the gold modified platform increased the charge transfer resistance across the electrochemical set-up. The observed behavior was linear from 0.02 to 7.0 ng/mL of 8OHdG concentrations. The interference from glucose, urea and creatinine was found negligible. An attempt of application to synthetic samples was also successfully conducted. Overall, the presented approach enabled the production of suitably oriented Abs over a gold platform by means of a much simpler process than other oriented-Ab binding approaches described in the literature, as far as we know, and was successful in terms of analytical features and sample application.

The effect of method, standard and sample components on the total antioxidant capacity of commercial waters assessed by optical conventional assays

The total antioxidant capacity (TAC) of 28 flavoured water samples was assessed by ferric reducing antioxidant potential (FRAP), oxygen radical absorbance capacity (ORAC), trolox equivalent antioxidant capacity (TEAC) and total reactive antioxidant potential (TRAP) methods. It was observed that flavoured waters had higher antioxidant activity than the corresponding natural ones. The observed differences were attributed to flavours, juice and vitamins. Generally, higher TAC contents were obtained on lemon waters and lower values on guava and raspberry flavoured waters. Lower and higher TACs were obtained by TRAP and ORAC method, respectively. Statistical analysis suggested that vitamins and flavours increased the antioxidant content of the commercial waters.