962 resultados para Paradigme aspect
Resumo:
A major concern of embedded system architects is the design for low power. We address one aspect of the problem in this paper, namely the effect of executable code compression. There are two benefits of code compression – firstly, a reduction in the memory footprint of embedded software, and secondly, potential reduction in memory bus traffic and power consumption. Since decompression has to be performed at run time it is achieved by hardware. We describe a tool called COMPASS which can evaluate a range of strategies for any given set of benchmarks and display compression ratios. Also, given an execution trace, it can compute the effect on bus toggles, and cache misses for a range of compression strategies. The tool is interactive and allows the user to vary a set of parameters, and observe their effect on performance. We describe an implementation of the tool and demonstrate its effectiveness. To the best of our knowledge this is the first tool proposed for such a purpose.
Resumo:
A unit cube in k dimensions (k-cube) is defined as the Cartesian product R-1 x R-2 x ... x R-k where R-i (for 1 <= i <= k) is a closed interval of the form [a(i), a(i) + 1] on the real line. A graph G on n nodes is said to be representable as the intersection of k-cubes (cube representation in k dimensions) if each vertex of C can be mapped to a k-cube such that two vertices are adjacent in G if and only if their corresponding k-cubes have a non-empty intersection. The cubicity of G denoted as cub(G) is the minimum k for which G can be represented as the intersection of k-cubes. An interesting aspect about cubicity is that many problems known to be NP-complete for general graphs have polynomial time deterministic algorithms or have good approximation ratios in graphs of low cubicity. In most of these algorithms, computing a low dimensional cube representation of the given graph is usually the first step. We give an O(bw . n) algorithm to compute the cube representation of a general graph G in bw + 1 dimensions given a bandwidth ordering of the vertices of G, where bw is the bandwidth of G. As a consequence, we get O(Delta) upper bounds on the cubicity of many well-known graph classes such as AT-free graphs, circular-arc graphs and cocomparability graphs which have O(Delta) bandwidth. Thus we have: 1. cub(G) <= 3 Delta - 1, if G is an AT-free graph. 2. cub(G) <= 2 Delta + 1, if G is a circular-arc graph. 3. cub(G) <= 2 Delta, if G is a cocomparability graph. Also for these graph classes, there axe constant factor approximation algorithms for bandwidth computation that generate orderings of vertices with O(Delta) width. We can thus generate the cube representation of such graphs in O(Delta) dimensions in polynomial time.
Resumo:
An important application of thermal storage is solar energy for power generation or process heating. Low temperature thermal storage in a packed rock bed is considered best option for thermal storage for solar drying applications. In this paper, mathematical formulations for conical and cylindrical rock bed storage tanks have been developed. The model equations are solved numerically for charging/discharging cycles. From the simulated results, it was observed that for the same aspect ratio between the diameter and the length of the thermal storages, the conical thermal storage had better performance. The temperature distribution was found to be more uniform in the truncated conical shape rock bed storage. Also, the pressure drop over long period of time in the conical thermal storage was lower than that of the cylindrical thermal storage. Hence, the amount of power required from a centrifugal fan was lower.
Resumo:
In a series of polymers containing alternately placed electron-rich dialkoxyilaphthalene (DAN) donors and electron-deficient pyromellitic diimide (PDI) acceptors linked by hexa(oxyethylene) (OE-6) segments, the ability to form a folded D-A stack was intentionally disrupted by random inclusion of varying amounts of a comonomer that is devoid of DAN donor units. NMR spectroscopic studies of folding in these copolymers, induced by NH4SCN that coordinates with the OE-6 segments and facilitates the charge-transfer (C-T) induced D-A stacking, clearly reveals the presence of PDI units that are isolated and those that are located at the ends of (D-A),, stacks. Similar conclusions regarding the presence of stacked and unstacked regions along the polymer chain were also inferred from UV-vis spectroscopic studies that probe the evolution of charge-transfer band. One fascinating aspect of these copolymers wits their ability to undergo it two-step folding: first, short (D-A),, stacks are formed by the interaction of the NH4+ ion with some specific regions of the polymer chain, and subsequently these Stacks are further stacked via a two-point interaction with it suitably designed external folding agent that carries a DAN unit and all ammonium group. In the second step, the interaction first occurs by the coordination of the ammonium group of the folding agent with the OE-6 segment, which in turn facilitates the C-T interaction of the DAN unit with the adjacent uncomplexed PDI units along the polymer chain, leading to an increase ill the slacking. Variations of several spectral features, during both UV-vis and NMR spectroscopic titrations, clearly reveal this novel two-step folding process.
Resumo:
Inadvertent failure of power transformers has serious consequences on the power system reliability, economics and the revenue accrual. Insulation is the weakest link in the power transformer prompting periodic inspection of the status of insulation at different points in time. A close Monitoring of the electrical, chemical and such other properties on insulation as are sensitive to the amount of time-dependent degradation becomes mandatory to judge the status of the equipment. Data-driven Diagnostic Testing and Condition Monitoring (DTCM) specific to power transformer is the aspect in focus. Authors develop a Monte Carlo approach for augmenting the rather scanty experimental data normally acquired using Proto-types of power transformers. Also described is a validation procedure for estimating the accuracy of the Model so developed.
Resumo:
Epidemiological and experimental studies suggest that changes in gut microbial balance are associated with increases in the prevalence of allergic diseases. Probiotics are proposed to provide beneficial immunoregulatory signals which aid in oral tolerance achievement and alleviation of symptoms of allergic diseases. The present study evaluates both the immunological mechanisms of probiotics in infants with allergic diseases and their preventive aspect among infants prone to allergy. Furthermore, the purpose of the study was to characterise the immunological features of cord blood mononuclear cells (CBMCs) in infants at high genetic risk for allergy. GATA-3 expression (p = 0.03), interleukin (IL) -2(p = 0.026), and IL-5 (p = 0.013) secretion of stimulated CBMCs were higher in IgE-sensitized infants at age 2 than in non-allergic, non-sensitized infants. Lactobacillus GG (LGG) treatment increased secretion of IFN-γ by PBMCs in vitro in infants with cow s milk allergy (CMA) (p = 0.006) and in infants with IgE-associated eczema (p = 0.017), when compared to levels in the placebo group. A probiotic mixture, increased secretion of IL-4 by PBMCs in vitro in infants with CMA (p = 0.028), when compared with placebo-group levels. The LGG treatment induced higher plasma C-reactive protein (CRP) (p = 0.021) and IL-6 (p = 0.036) levels in infants with IgE-associated eczema than in the placebo group. The probiotic mixture induced higher plasma IL-10 levels in infants with eczema (p = 0.016). In the prevention study of allergic dis-eases, the infants receiving the probiotic mixture had higher plasma levels of CRP (p = 0.008), total IgA (p = 0.016), total IgE (p = 0.047), and IL-10 (p = 0.002) than did infants in the placebo group. Increased CRP level at age 6 months was associated with a decreased risk for eczema at age 2 not only in the infants who received probiotics but also in the placebo group (p = 0.034). In conclusion, the priming of the GATA-3 and IL-5 pathway can occur in utero, and a primary feature of T-cells predisposing to IgE-sensitization seems to directly favour Th2 deviation. LGG treatment induced increased plasma levels of CRP and IL-6 in infants with IgE-associated eczema, suggesting an activation of innate immu-nity. The probiotic mixture, when given to allergy-prone infants, induced inflammation, detected as increased plasma CRP levels, which at age 6 months was associated with decreased risk for eczema at age 2.The probiotic-induced response in allergy prone infants was characterized by their higher plasma IL-10, total IgE, and CRP levels, without induction of an allergen-specific IgE response. In this respect, the probiotics in infancy appear to induce protective immune profiles that are characteristic for chronic low-grade inflammation, a response resembling that of helminth-like infections.
Resumo:
[Book] In recent years "light architecture" has returned as an important component of contemporary architectural design. More and more architects work with lighting designers in order to develop concepts for the nocturnal appearance of their buildings. It is little known that, despite numerous recent technical developments, the vocabulary of today's lighting designers has a long history. The large world fairs of the nineteenth century were the first testing ground for architectural illumination." "This publication juxtaposes historic buildings and architectural visions with recent designs, as well as with contemporary paintings and photographs that reacted to the changing nocturnal skyline. Essays address different aspects of this aspect of architectural history.
Resumo:
Background Interest in the use of healing gardens in healthcare settings to provide therapeutic benefits is increasing, however insight is needed to determine whether patients, patient families and friends, and staff who spend time in these gardens use these in the manner for which they were designed, and experience the benefits suggested by broader research in this field. Objective(s) Visitors to four of the LCCH gardens have left comments in ‘bench diaries’ (visitors books). Analysis of these comments yields valuable insights into the use of the gardens, enabling reflection on the design intent and outcomes and guidance regarding how the gardens might be better utilised, as well as a basis for further investigation into the use and value of the gardens. Method(s) Comments have been coded and analysed using a thematic analysis approach to identify patterns relating to the reasons for which people appear to come to the healing gardens; benefits they appear to receive from spending time there; and features and aspects of the gardens that they appear to appreciate in particular. Only comments related to the gardens have been used in this analysis, with all comments being deidentified. Outcome/Conclusion Comments left in the Adventure Garden and Secret Garden bench diaries were used for the analysis, as Staff Garden and Babies Garden bench diary comments did not relate to the garden. There were no negative comments relating to the gardens, other than one comment requesting additional benches. The vast majority of comments expressed gratitude for the space. The four most frequently observed themes from the comments left in the Secret Garden Bench Diary indicated that they were seeking ‘time out’ from their experiences of being at the hospital, a desire for a ‘dose of nature’ (greenery, beautiful garden, etc), and fresh air, and that the garden space provided a restorative experience to them in some manner. Comments in the Adventure Garden Bench Diary related predominately to the view. Analysis of the comments emphasises the importance of gardens providing multi-sensory experiences that significantly differentiate the space from the hospital ward and provide visitors with a sense of being away, of peacefulness, and of familiarity with the outside world. Positioning gardens with prospect, and solar aspect, appears important in these regards, as does the presence of visible greenery. Adequate seating in locations that provide pleasing views appears particularly important for staff and adult visitors. Whilst comments in the Bench Diaries did not indicate direct awareness of the stress and anxiety-reducing effects that research elsewhere has found from viewing plants and nature, however these effects may underpin many of these experiences that visitors did share.
Resumo:
Numerical weather prediction (NWP) models provide the basis for weather forecasting by simulating the evolution of the atmospheric state. A good forecast requires that the initial state of the atmosphere is known accurately, and that the NWP model is a realistic representation of the atmosphere. Data assimilation methods are used to produce initial conditions for NWP models. The NWP model background field, typically a short-range forecast, is updated with observations in a statistically optimal way. The objective in this thesis has been to develope methods in order to allow data assimilation of Doppler radar radial wind observations. The work has been carried out in the High Resolution Limited Area Model (HIRLAM) 3-dimensional variational data assimilation framework. Observation modelling is a key element in exploiting indirect observations of the model variables. In the radar radial wind observation modelling, the vertical model wind profile is interpolated to the observation location, and the projection of the model wind vector on the radar pulse path is calculated. The vertical broadening of the radar pulse volume, and the bending of the radar pulse path due to atmospheric conditions are taken into account. Radar radial wind observations are modelled within observation errors which consist of instrumental, modelling, and representativeness errors. Systematic and random modelling errors can be minimized by accurate observation modelling. The impact of the random part of the instrumental and representativeness errors can be decreased by calculating spatial averages from the raw observations. Model experiments indicate that the spatial averaging clearly improves the fit of the radial wind observations to the model in terms of observation minus model background (OmB) standard deviation. Monitoring the quality of the observations is an important aspect, especially when a new observation type is introduced into a data assimilation system. Calculating the bias for radial wind observations in a conventional way can result in zero even in case there are systematic differences in the wind speed and/or direction. A bias estimation method designed for this observation type is introduced in the thesis. Doppler radar radial wind observation modelling, together with the bias estimation method, enables the exploitation of the radial wind observations also for NWP model validation. The one-month model experiments performed with the HIRLAM model versions differing only in a surface stress parameterization detail indicate that the use of radar wind observations in NWP model validation is very beneficial.
Resumo:
AIM AND BACKGROUND: While the importance of morale is well researched in the nursing literature, strategies and interventions are not so prolific. The complexities of interpersonal relationships within the clinical domain, and the critical issues faced by nurses on a daily basis, indicate that morale, job satisfaction and motivation are essential components in improving workplace efficiency, output and communication amongst staff. Drawing on educational, organizational and psychological literature, this paper argues that the ability to inspire morale in staff is a fundamental indicator of sound leadership and managerial characteristics. EVALUATION AND KEY ISSUES: Four practical concepts that could be implemented in the clinical setting are proposed. These include: role preparation for managers, understanding internal and external motivation, fostering internal motivation in nursing staff, and the importance of attitude when investing in relationships.
Resumo:
This work belongs to the field of computational high-energy physics (HEP). The key methods used in this thesis work to meet the challenges raised by the Large Hadron Collider (LHC) era experiments are object-orientation with software engineering, Monte Carlo simulation, the computer technology of clusters, and artificial neural networks. The first aspect discussed is the development of hadronic cascade models, used for the accurate simulation of medium-energy hadron-nucleus reactions, up to 10 GeV. These models are typically needed in hadronic calorimeter studies and in the estimation of radiation backgrounds. Various applications outside HEP include the medical field (such as hadron treatment simulations), space science (satellite shielding), and nuclear physics (spallation studies). Validation results are presented for several significant improvements released in Geant4 simulation tool, and the significance of the new models for computing in the Large Hadron Collider era is estimated. In particular, we estimate the ability of the Bertini cascade to simulate Compact Muon Solenoid (CMS) hadron calorimeter HCAL. LHC test beam activity has a tightly coupled cycle of simulation-to-data analysis. Typically, a Geant4 computer experiment is used to understand test beam measurements. Thus an another aspect of this thesis is a description of studies related to developing new CMS H2 test beam data analysis tools and performing data analysis on the basis of CMS Monte Carlo events. These events have been simulated in detail using Geant4 physics models, full CMS detector description, and event reconstruction. Using the ROOT data analysis framework we have developed an offline ANN-based approach to tag b-jets associated with heavy neutral Higgs particles, and we show that this kind of NN methodology can be successfully used to separate the Higgs signal from the background in the CMS experiment.
Resumo:
Several excited states of Ds and Bs mesons have been discovered in the last six years: BaBar, Cleo and Belle discovered the very narrow states D(s0)*(2317)+- and D(s1)(2460)+- in 2003, and CDF and DO Collaborations reported the observation of two narrow Bs resonances, B(s1)(5830)0 and B*(s2)(5840)0 in 2007. To keep up with experiment, meson excited states should be studied from the theoretical aspect as well. The theory that describes the interaction between quarks and gluons is quantum chromodynamics (QCD). In this thesis the properties of the meson states are studied using the discretized version of the theory - lattice QCD. This allows us to perform QCD calculations from first principles, and "measure" not just energies but also the radial distributions of the states on the lattice. This gives valuable theoretical information on the excited states, as we can extract the energy spectrum of a static-light meson up to D wave states (states with orbital angular momentum L=2). We are thus able to predict where some of the excited meson states should lie. We also pay special attention to the order of the states, to detect possible inverted spin multiplets in the meson spectrum, as predicted by H. Schnitzer in 1978. This inversion is connected to the confining potential of the strong interaction. The lattice simulations can also help us understand the strong interaction better, as the lattice data can be treated as "experimental" data and used in testing potential models. In this thesis an attempt is made to explain the energies and radial distributions in terms of a potential model based on a one-body Dirac equation. The aim is to get more information about the nature of the confining potential, as well as to test how well the one-gluon exchange potential explains the short range part of the interaction.
Resumo:
Issue addressed: Alcohol-related road crashes are a leading cause of the injury burden experienced by Indigenous Australians. Existing drink driving programs are primarily designed for the mainstream population. The ‘Hero to Healing’ program was specifically developed with Indigenous communities and is underpinned by the Community Reinforcement Approach (CRA). This paper reports on the formative evaluation of the program from delivery in two Far North Queensland communities. Methods: Focus groups and semistructured interviews were conducted with drink driver participants (n = 17) and other Elders and community members (n = 8) after each program. Qualitative content analysis was used to categorise the transcripts. Results: The CRA appealed to participants because of its flexible nature and encouragement of rearranging lifestyle factors, without specific focus on alcohol use. Participants readily identified with the social and peer-related risk and protective factors discussed. Cofacilitation of the program with Elders was identified as a key aspect of the program. More in-depth discussion about cannabis and driving, anger management skills and relationship issues are recommended. Conclusions: Participants’ recognition of content reinforced earlier project results, particularly the use of kinship pressure to motivate younger family members to drink drive. Study findings suggest that the principles of the CRA are useful; however, some amendments to the CRA components and program content were necessary. So what?: Treating drink driving in regional and remote Indigenous Australian communities as a community and social issue, rather than an individual phenomenon, is likely to lead to a reduction in the number of road-related injuries Indigenous people experience.
Resumo:
"Taxation law can be an incredibly complex subject to absorb, particularly when time is limited. Written specifically for students, Principles of Taxation Law 2016 brings much needed clarity to this area of law. Utilising many methods to make this often daunting subject achievable, particular features of the 2016 edition include: - seven parts: overview and structure, principles of income, deductions and offsets, timing issues, investment and business entities, tax avoidance and administration, and indirect taxes; - clearly structured chapters within those parts grouped under helpful headings; - flowcharts, diagrams and tables, end of chapter practice questions, and case summaries; - an appendix containing all of the up to date and relevant rates; and - the online self-testing component mentor, which provides questions for students of both business and law; Every major aspect of the Australian tax system is covered, with chapters on topics such as goods and services tax, superannuation, offsets, partnerships, capital gains tax, trusts, company tax, tax administration and state taxes."--Publisher Website
Resumo:
This paper is concerned with the experimental and modeling studies on the smoldering rates of incense sticks as a function of ambient oxygen fraction in air, the flow velocity and size. The experimental results are obtained both for forward and reverse smolder conditions. The results are explained on the basis of surface combustion due to diffusion of oxygen to the surface by both free and forced convection supporting the heat transfer into the solid by conduction, into the stream by convection and the radiant heat transfer from the surface. The heat release at the surface is controlled by the convective transport of the oxidizer to the surface. To obtain the diffusion rates particularly for the reverse smolder, CFD calculations of fluid flow with along with a passive scalar are needed; these calculations have been made both for forward and reverse smolder. The interesting aspect of the CFD calculations is that while the Nusselt umber for forward smolder shows a clear root( Re-u) dependence ( Re-u = Flow Reynolds Number), the result for reverse smolder shows a peak in the variation with Reynolds number with the values lower than for forward smolder and unsteadiness in the flow beyond a certain flow rate. The results of flow behavior and Nusselt number are used in a simple model for the heat transfer at the smoldering surface to obtain the dependence of the smoldering rate on the diameter of the incense stick, the flow rate of air and the oxygen fraction. The results are presented in terms of a correlation for the non-dimensional smoldering rate with radiant flux from the surface and heat generation rate at the surface. The correlations appear reasonable for both forward and reverse smolder cases.