Novel polymer-ceramic composites for protection against ballistic fragments

For the first time, internally reinforced aggregate polymer ceramic composites were evaluated against fragment simulating projectiles (FSPs) of various calibers to investigate their ballistic impact response. Samples were prepared by mechanically mixing B4C and cBN over a range of ratios and combinations with either thermosetting phenolic or epoxy resin and aramid pulp. Dry mixtures were then molded in a closed die using a heated platen press. The resulting tiles were then mounted as ‘‘strike faces’’ to an aramid backing material using an epoxy resin. Backed targets were tested in a fully instrumented firing range against 5.56 mm FSPs to test ballistic limit. A further series of tests using 7.62, 12.5, and 20 mm FSPs was conducted to examine round deformation across a range of fragments calibers. Round deformations were measured after impact and plotted against shot velocity. It was found that the polymer ceramic composite materials were effective round deformers and, like sintered ceramic strike faces, demonstrated improved ballistic performance at an equivalent areal density and impressive multihit capability.

Comparison of the performance of ceramic microfiltration and ultrafiltration membranes in the reclamation and reuse of secondary wastewater

Advanced treatment of secondary wastewater generally has been achieved using polymeric microfiltration and ultrafiltration membranes. Newly developed ceramic membranes offer distinctive advantages over the currently employed membranes and were recently introduced for the purpose. This paper presents results of a pilot study designed to investigate the application of ceramic microfiltration (MF) and ultrafiltration (UF) membranes in the recovery of water from secondary wastewater. Synthetic wastewater similar to the quality of secondary treated wastewater was fed to ceramic MF and UF system in a cross-flow mode. The filtration experiments revealed that the flux recovery through tubular ceramic MF membrane was more sensitive to the variation in TMP compared with the tubular ceramic UF membrane over the range of TMP studied. The resistance in series model was used for the evaluation of the resistance to the permeate flux. The results revealed that for ceramic UF membrane, the contribution to the total resistance of fouling was higher than the inherent of the clean membrane resistance. However, both the clean membrane resistance and the fouling resistance contribute equally in the case of MF membrane. Various wastewater indices were measured to evaluate the effectiveness of the filtration treatment. The ceramic UF membrane consistently met water quality in the permeate in terms of colour, turbidity, chemical oxygen demand and absorbance, suggesting that the permeate water could be made to be reused or recycled for suitable purposes. However, MF membrane appeared to be incompetent with respect to the removal of colour. The unified membrane fouling index (UMFI) was used to measure the fouling potential of both the membranes. The result showed that for UF membrane, the value of UMFI is one order of magnitude higher than MF membrane. The overall results suggest that there were significant differences in the performance of both the ceramic UF and MF membranes that are likely to impact on the operation and maintenance of the membrane system.

Private Health Insurance Status and Utilisation of Dental Services in Australia

This article focuses on the relationship between private insurance status and dental service utilisation in Australia using data between 1995 and 2001. This article employs joint maximum likelihood to estimate models of time since last dental visit treating private ancillary health insurance (PAHI) as endogenous. The sensitivity of results to the choice between two different but related types of instrumental variables is examined. We find robust evidence in both 1995 and 2001 that individuals with a PAHI policy make significantly more frequent dental consultations relative to those without such coverage. A comparison of the 1995 and 2001 results, however, suggests that there has been an increasing role of PAHI in terms of the frequency of dental consultations over time. This seems intuitive given the trends in the price of unsubsidised private dental consultations. In terms of policy, our results suggest that while government measures to increase private health insurance coverage in Australia have been successful to a significant degree, that success may have come at some cost in terms of socio-economic inequality as the privately insured are provided much better access to care and financial protection.

Characterisation of lipase fatty acid selectivity using novel omega-3 pNP-acyl esters

 Lipases have applications for the industrial processing of lipids, including concentrating and/or modifying fish oil derived omega-3 fatty acids, widely used as nutritional supplement and functional food ingredients. A range of para-nitrophenol (pNP) acyl esters were synthesised as a means to rapidly screen lipases for fatty acid selectivity using spectrophotometric detection. The chosen esters were based primarily on the most abundant fatty acids present in anchovy and tuna oils. pNP derivatives of C16:1 n-7, C18:1 n-9 (OA), C18:2 n-6 (LA), C18:3 n-3 (ALA), C20:5 n-3 (EPA) and C22:6 n-3 (DHA) were synthesised. Storage stability of these pNP derivatives was shown to be at least 6 months and all pNP derivatives, including those of EPA and DHA, were shown to be stable throughout the conditions of the assay. We applied the new assay substrates for the determination of fatty acid selectivity of five widely utilised lipases. Results showed that the lipase from Candida rugosa was the most selective in terms of omega-3 specificity, preferentially hydrolysing all other medium– long chain substrates. Lipases from Rhizomucor miehei and Thermomyces lanuginosa also showed selectivity, with a significant preference for saturated fatty acids. Candida Antarctica lipase B and Aspergillus niger lipase were the least selective.

Isolation and characterisation of omega-3 fatty acids producing marine microbes

As a renewable alternative to fish oil, microbial-derived omega-3-fatty acids can be potential nutritional supplements. This study reported the isolation of novel oleaginous marine microbes from the Victorian marine environment capable of producing omega-3-fatty acids and other bio-actives. Fermentation strategies using low cost substrates improved omega-3-oils production in selected isolates.