First Measurement of the b-Jet Cross Section in Events with a W Boson in pp̅ Collisions at √s=1.96 TeV

The cross section for jets from b quarks produced with a W boson has been measured in ppbar collision data from 1.9/fb of integrated luminosity recorded by the CDF II detector at the Tevatron. The W+b-jets process poses a significant background in measurements of top quark production and prominent searches for the Higgs boson. We measure a b-jet cross section of 2.74 +- 0.27(stat.) +- 0.42(syst.) pb in association with a single flavor of leptonic W boson decay over a limited kinematic phase space. This measured result cannot be accommodated in several available theoretical predictions.

Measurement of the WW+WZ Production Cross Section Using the lepton+jets Final State at CDF II

We report two complementary measurements of the WW+WZ cross section in the final state consisting of an electron or muon, missing transverse energy, and jets, performed using p\bar{p} collision data at sqrt{s} = 1.96 TeV collected by the CDF II detector. The first method uses the dijet invariant mass distribution while the second more sensitive method uses matrix-element calculations. The result from the second method has a signal significance of 5.4 sigma and is the first observation of WW+WZ production using this signature. Combining the results gives sigma_{WW+WZ} = 16.0 +/- 3.3 pb, in agreement with the standard model prediction.

Measurement of the top pair production cross section in the dilepton decay channel in pp̅ collisions at √s=1.96 TeV

A measurement of the $\ttbar$ production cross section in $\ppbar$ collisions at $\sqrt{{\rm s}}$ = 1.96 TeV using events with two leptons, missing transverse energy, and jets is reported. The data were collected with the CDF II Detector. The result in a data sample corresponding to an integrated luminosity 2.8 fb$^{-1}$ is: $\sigma_{\ttbar}$ = 6.27 $\pm$ 0.73(stat) $\pm$ 0.63(syst) $\pm$ 0.39(lum) pb. for an assumed top mass of 175 GeV/$c^{2}$.

Measurement of the top quark mass and pp̅ →tt̅ cross section in the all-hadronic mode with the CDF II detector

We present a measurement of the top quark mass and of the top-antitop pair production cross section using p-pbar data collected with the CDFII detector at the Tevatron Collider at the Fermi National Accelerator Laboratory and corresponding to an integrated luminosity of 2.9 fb-1. We select events with six or more jets satisfying a number of kinematical requirements imposed by means of a neural network algorithm. At least one of these jets must originate from a b quark, as identified by the reconstruction of a secondary vertex inside the jet. The mass measurement is based on a likelihood fit incorporating reconstructed mass distributions representative of signal and background, where the absolute jet energy scale (JES) is measured simultaneously with the top quark mass. The measurement yields a value of 174.8 +- 2.4(stat+JES) ^{+1.2}_{-1.0}(syst) GeV/c^2, where the uncertainty from the absolute jet energy scale is evaluated together with the statistical uncertainty. The procedure measures also the amount of signal from which we derive a cross section, sigma_{ttbar} = 7.2 +- 0.5(stat) +- 1.0 (syst) +- 0.4 (lum) pb, for the measured values of top quark mass and JES.

Measurement of the Ratio σtt̅ /σZ/γ*→ll and Precise Extraction of the tt̅ Cross Section

We report a measurement of the ratio of the tt̅ to Z/γ* production cross sections in √s=1.96  TeV pp̅ collisions using data corresponding to an integrated luminosity of up to 4.6  fb-1, collected by the CDF II detector. The tt̅ cross section ratio is measured using two complementary methods, a b-jet tagging measurement and a topological approach. By multiplying the ratios by the well-known theoretical Z/γ*→ll cross section predicted by the standard model, the extracted tt̅ cross sections are effectively insensitive to the uncertainty on luminosity. A best linear unbiased estimate is used to combine both measurements with the result σtt̅ =7.70±0.52  pb, for a top-quark mass of 172.5  GeV/c2.

Steady flow of a maxwell fluid in a porous cylindrical annulus with circular cross-section

When a fluid with memory is injected into any flow region some assumptions regarding the initial state of stress have to be made in order to determine the state of stress at any subsequent instant. For a Maxwell fluid, it is assumed that the fluid near the surface of injection is suddenly stressed and responds by starting flow in accordance with the mechanical model chosen. The flow of a Maxwell fluid with a single relaxation time has been determined under the above assumption in the following two cases: (i) annulus between two porous concentric circular cylinders, and (ii) space between two porous and infinitely extending parallel plates. The nature of flow in the present case is similar to that of the Reiner-Rivlin fluids obtained by Narasimhan2).

Measurement of the tt̅ production cross section in pp̅ collisions at √s=1.96 TeV using soft electron b-tagging

We present a measurement of the top quark pair production cross section in ppbar collisions at sqrt(s)=1.96 TeV using a data sample corresponding to 1.7/fb of integrated luminosity collected with the Collider Detector at Fermilab. We reconstruct ttbar events in the lepton+jets channel. The dominant background is the production of W bosons in association with multiple jets. To suppress this background, we identify electrons from the semileptonic decay of heavy-flavor jets. We measure a production cross section of 7.8 +/- 2.4 (stat) +/- 1.6 (syst) +/- 0.5 (lumi) pb. This is the first measurement of the top pair production cross section with soft electron tags in Run II of the Tevatron.

Measurement of the Ratio σtt̅ /σZ/γ*→ll and Precise Extraction of the tt̅ Cross Section

We report a measurement of the ratio of the tt̅ to Z/γ* production cross sections in √s=1.96  TeV pp̅ collisions using data corresponding to an integrated luminosity of up to 4.6  fb-1, collected by the CDF II detector. The tt̅ cross section ratio is measured using two complementary methods, a b-jet tagging measurement and a topological approach. By multiplying the ratios by the well-known theoretical Z/γ*→ll cross section predicted by the standard model, the extracted tt̅ cross sections are effectively insensitive to the uncertainty on luminosity. A best linear unbiased estimate is used to combine both measurements with the result σtt̅ =7.70±0.52  pb, for a top-quark mass of 172.5  GeV/c2.

Measurement of the Ratio σtt̅ /σZ/γ*→ll and Precise Extraction of the tt̅ Cross Section

We report a measurement of the ratio of the top-antitop to Z/gamma* production cross sections in sqrt(s) = 1.96 TeV proton-antiproton collisions using data corresponding to an integrated luminosity of up to 4.6 fb-1, collected by the CDF II detector. The top-antitop cross section ratio is measured using two complementary methods, a b-jet tagging measurement and a topological approach. By multiplying the ratios by the well-known theoretical Z/gamma*->ll cross section, the extracted top-antitop cross sections are effectively insensitive to the uncertainty on luminosity. A best linear unbiased estimate is used to combine both measurements with the result sigma_(top-antitop) = 7.70 +/- 0.52 pb, for a top-quark mass of 172.5 GeV/c^2.

Measurement of the Single-Top-Quark Production Cross Section at CDF

We report a measurement of the single top quark production cross section in 2.2 ~fb-1 of p-pbar collision data collected by the Collider Detector at Fermilab at sqrt{s}=1.96 TeV. Candidate events are classified as signal-like by three parallel analyses which use likelihood, matrix element, and neural network discriminants. These results are combined in order to improve the sensitivity. We observe a signal consistent with the standard model prediction, but inconsistent with the background-only model by 3.7 standard deviations with a median expected sensitivity of 4.9 standard deviations. We measure a cross section of 2.2 +0.7 -0.6(stat+sys) pb, extract the CKM matrix element value |V_{tb}|=0.88 +0.13 -0.12 (stat+sys) +- 0.07(theory), and set the limit |V_{tb}|>0.66 at the 95% C.L.

Alppihiihdon alkutaival : Pujottelu- ja tunturihiihto Suomessa 1920-luvulta 1960-luvulle

The object of study in this thesis is Finnish skiing culture and Alpine skiing in particular from the point of view of ethnology. The objective is to clarify how, when, why and by what routes Alpine skiing found its way to Finland. What other phenomena did it bring forth? The objective is essentially linked to the diffusion of modern sports culture to Finland. The introduction of Alpine skiing to Finland took place at a time when skiing culture was changing: flat terrain skiing was abandoned in favour of cross-country skiing in the early decades of the 20th century, and new techniques and equipment made skiing a much more versatile sport. The time span of the study starts from the late 19th century and ends in the mid-20th century. The spatial focus is in Finland. People and communities formed through their actions are core elements in the study of sports and physical activity. Organizations tend to raise themselves into influential actors in the field of physical culture even if active individuals work in their background. Original archive documents and publications of sports organizations are central source material for this thesis, complemented by newspapers and sports magazines as well as photographs and films on early Alpine skiing in Finland. Ever since their beginning in the late 19th century skiing races in Finland had mostly taken place on flat terrain or sea ice. Skiing in broken cross-country terrain made its breakthrough in the 1920 s, at a time when modern skiing techniques were introduced in instruction manuals. In the late 1920 s the Finnish Women s Physical Education Association (SNLL) developed unconventional forms of pedagogical skiing instruction. They abandoned traditional Finnish flat terrain skiing and boldly looked for influences abroad, which caused friction between the leaders of the women s sports movement and the (male) leaders of the central skiing organization. SNLL was instrumental in launching winter tourism in Finnish Lapland in 1933. The Finnish Tourism Society, the State Railways and sports organizations worked in close co-operation to instigate a boom in tourism, which culminated in the inauguration of a tourist hotel at Pallastunturi hill in the winter of 1938. Following a Swedish model, fell-skiing was developed as a domestic counterpart to Alpine skiing as practiced in Central Europe. The first Finnish skiing resorts were built at sites of major cross-country skiing races. Inspired by the slope at Bad Grankulla health spa, the first slalom skiing races and fell-skiing, slalom enthusiasts began to look for purpose-built sites to practice turn technique. At first they would train in natural slopes but in the late 1930 s new slopes were cleared for slalom races and recreational skiing. The building of slopes and ski lifts and the emergence of organized slalom racing competitions gradually separated Alpine skiing from the old fell-skiing. After the Second World War fell-skiing was transformed into ski trekking on marked courses. At the same time Alpine skiing also parted ways with cross-country skiing to become a sport of its own. In the 1940 s and 1950 s Finnish Alpine skiing was almost exclusively a competitive sport. The specificity of Alpine skiing was enhanced by rapid development of equipment: the new skis, bindings and shoes could only be used going downhill.

Ferrolysis induced soil transformation by natural drainage in Vertisols of sub-humid South India

In sub-humid South India, recent studies have shown that black soil areas (Vertisols and vertic Intergrades), located on flat valley bottoms, have been rejuvenated through the incision of streambeds, inducing changes in the pedoclimate and soil transformation. Joint pedological, geochemical and geophysical investigations were performed in order to better understand the ongoing processes and their contribution to the chemistry of local rivers. The seasonal rainfall causes cycles of oxidation and reduction in a perched watertable at the base of the black soil, while the reduced solutions are exported through a loamy sand network. This framework favours a ferrolysis process, which causes low base saturation and protonation of clay, leading to the weathering of 2:1 then 1:1 clay minerals. Maximum weathering conditions occur at the very end of the wet season, just before disappearance of the perched watertable. Therefore, the by-products of soil transformation are partially drained off and calcareous nodules, then further downslope, amorphous silica precipitate upon soil dehydration. The ferrolysed area is fringing the drainage system indicating that its development has been induced by the streambed incision. The distribution of C-14 ages of CaCO3 nodules suggests that the ferrolysis process started during the late Holocene, only about 2 kyr B.P. at the studied site and about 5 kyr B.P. at the watershed outlet. The results of this study are applied to an assessment of the physical erosion rate (4.8x10(-3) m/kyr) since the recent reactivation of the erosion process. (C) 2010 Elsevier B.V. All rights reserved.

Enzymatic cross-linking of β-casein and its impact on digestibility and allergenicity

Protein modification via enzymatic cross-linking is an attractive way for altering food structure so as to create products with increased quality and nutritional value. These modifications are expected to affect not only the structure and physico-chemical properties of proteins but also their physiological characteristics, such as digestibility in the GI-tract and allergenicity. Protein cross-linking enzymes such as transglutaminases are currently commercially available, but also other types of cross-linking enzymes are being explored intensively. In this study, enzymatic cross-linking of β-casein, the most abundant bovine milk protein, was studied. Enzymatic cross-linking reactions were performed by fungal Trichoderma reesei tyrosinase (TrTyr) and the performance of the enzyme was compared to that of transglutaminase from Streptoverticillium mobaraense (Tgase). Enzymatic cross-linking reactions were followed by different analytical techniques, such as size exclusion chromatography -Ultra violet/Visible multi angle light scattering (SEC-UV/Vis-MALLS), phosphorus nuclear magnetic resonance spectroscopy (31P-NMR), atomic force (AFM) and matrix-assisted laser desorption/ionisation-time of flight mass spectrometry (MALDI-TOF MS). The research results showed that in both cases cross-linking of β-casein resulted in the formation of high molecular mass (MM ca. 1 350 kg mol-1), disk-shaped nanoparticles when the highest enzyme dosage and longest incubation times were used. According to SEC-UV/Vis-MALLS data, commercial β-casein was cross-linked almost completely when TrTyr and Tgase were used as cross-linking enzymes. In the case of TrTyr, high degree of cross-linking was confirmed by 31P-NMR where it was shown that 91 % of the tyrosine side-chains were involved in the cross-linking. The impact of enzymatic cross-linking of β-casein on in vitro digestibility by pepsin was followed by various analytical techniques. The research results demonstrated that enzymatically cross-linked β-casein was stable under the acidic conditions present in the stomach. Furthermore, it was found that cross-linked β-casein was more resistant to pepsin digestion when compared to that of non modified β-casein. The effects of enzymatic cross-linking of β-casein on allergenicity were also studied by different biochemical test methods. On the basis of the research results, enzymatic cross-linking decreased allergenicity of native β-casein by 14 % when cross-linked by TrTyr and by 6 % after treatment by Tgase. It can be concluded that in addition to the basic understanding of the reaction mechanism of TrTyr on protein matrix, the research results obtained in this study can have high impact on various applications like food, cosmetic, medical, textile and packing sectors.

Global and EU governance for sustainable forest management with special reference to capacity building in Ethiopia and Southern Sudan

The purpose of this study was to produce information on and practical recommendations for informed decision-making on and capacity building for sustainable forest management (SFM) and good forest governance. This was done within the overall global framework for sustainable development with special emphasis on the EU and African frameworks and on Southern Sudan and Ethiopia in particular. The case studies on Southern Sudan and Ethiopia focused on local, national and regional issues. Moreover, this study attempted to provide both theoretical and practical new insight. The aim was to build an overall theoretical framework and to study its key contents and main implications for SFM and good forest governance at all administration levels, for providing new tools for capacity building in natural resources management. The theoretical framework and research approach were based on the original research problem and the general and specific aims of the study. The key elements of the framework encompass sustainable development, global and EU governance, sustainable forest management (SFM), good forest governance, as well as international and EU law. The selected research approach comprised matrix-based assessment of international, regional (EU and Africa) and national (Southern Sudan and Ethiopia) policy and legal documents. The specific case study on Southern Sudan also involved interviews and group discussions with local community members and government officials. As a whole, this study attempted to link the global, regional, national and local levels in forest-sector development and especially to analyse how the international policy development in environmental and forestry issues is reflected in field-level progress towards SFM and good forest governance, for the specific cases of Southern Sudan and Ethiopia. The results on Southern Sudan focused on the existing situation and perceived needs in capacity building for SFM and good forest governance at all administration levels. Specifically, the results of the case study on Southern Sudan presented the current situation in selected villages in the northern parts of Renk County in Upper Nile State, and the implications of Multilateral Environmental Agreements (MEAs) and of the new forest policy framework for capacity building actions. The results on Ethiopia focused on training, extension, research, education and new curriculum development within higher education institutions and particularly at the Wondo Genet College of Forestry and Natural Resources (WGCF-NR), which administratively lies under Hawassa University. The results suggest that, for both cases studies, informed decision-making on and capacity building for SFM and good forest governance require comprehensive, long-term, cross-sectoral, coherent and consistent approaches within the dynamic and evolving overall global framework, including its multiple inter-linked levels. The specific priority development and focus areas comprised the establishment of SFM and good forest governance in accordance with the overall sustainable development priorities and with more focus on the international trade in forest products that are derived from sustainable and legal sources with an emphasis on effective forest law enforcement and governance at all levels. In Upper Nile State in Southern Sudan there were positive development signals such as the will of the local people to plant more multipurpose trees on farmlands and range lands as well as the recognition of the importance of forests and trees for sustainable rural development where food security is a key element. In addition, it was evident that the local communities studied in Southern Sudan also wanted to establish good governance systems through partnerships with all actors and through increased local responsibilities. The results also suggest that the implementation of MEAs at the local level in Southern Sudan requires mutually supportive and coherent approaches within the agreements as well as significantly more resources and financial and technical assistance for capacity building, training and extension. Finally, the findings confirm the importance of full utilization of the existing local governance and management systems and their traditional and customary knowledge and practices, and of new development partnerships with full participation of all stakeholders. The planned new forest law for Southern Sudan, based on an already existing new forest policy, is expected to recognize the roles of local-level actors, and it would thus obviously facilitate the achieving of sustainable forest management.