Suomen kasvihuonekaasupäästöt Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa – kokonaistilanne ja vähentämistoimenpiteet

Tämä diplomityö on läpileikkaus kasvihuonekaasupäästöistä sekä niitä koskevista vähennystoimenpiteistä Suomessa Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa. Työ on toteutettu kirjallisuustutkimuksena ja siihen on käytetty painettuja sekä sähköisiä lähteitä. Huoli ilmastonmuutoksesta on saanut aikaan sen, että kasvihuonekaasupäästöjä rajoitetaan tänä päivänä kansainvälisillä sopimuksilla. Vaikka kaikki suuretkaan päästäjämaat eivät ole sopimuksia ratifioineet, ovat EU-maat Suomi mukaan lukien sitoutuneet YK:n ilmastonmuutosta koskevaan puitesopimukseen ja sen noudattamiseen. Puitesopimusta tarkentavassa Kioton pöytäkirjassa EU sitoutui vähentämään kuuden eri kasvihuonekaasun kokonaispäästöjä yhteensä 8 prosenttia ajanjaksolla 2008–2012 vuoteen 1990 verrattuna. Kasvihuonekaasut, joita rajoitukset koskivat, olivat hiilidioksidi, metaani, dityppioksidi, fluorihiilivedyt, perfluorihiilivedyt ja rikkiheksafluoridi. EU:n sisäisessä taakanjaossa Suomen tavoite oli pitää päästöt vertailuvuoden 1990 tasossa ja Suomi alitti tämän noin viidellä prosentilla. Vuoden 2012 jälkeen Suomen kasvihuonekaasupäästöjen vähennystavoite on kiristynyt. Vuosille 2013–2020 Suomen tavoite on vähentää kasvihuonekaasupäästöjä 20 prosenttia alle perusvuoden 1990 tason. Työssä tutustutaan myös keinoihin, joilla aiempien ja tulevien päästöjenvähennystavoitteiden saavuttaminen on mahdollista. Näitä keinoja on mm. erilaisten biopolttoaineiden sekoittaminen fossiilisten polttoaineiden sekaan, energiatehokkuuden parantaminen ja biokaasun käytön lisääminen. Lisäksi työssä käsitellään eräitä merkityksellisiä käsitteitä, kuten EU:n päästökauppajärjestelmä ja hiilidioksidin talteenotto ja varastointi.

The Cycle Times of Working Capital: Financial Value Chain Analysis Method

Interest towards working capital management increased among practitioners and researchers because the financial crisis of 2008 caused the deterioration of the general financial situation. The importance of managing working capital effectively increased dramatically during the financial crisis. On one hand, companies highlighted the importance of working capital management as part of short-term financial management to overcome funding difficulties. On the other hand, in academia, it has been highlighted the need to analyze working capital management from a wider perspective namely from the value chain perspective. Previously, academic articles mostly discussed working capital management from a company-centered perspective. The objective of this thesis was to put working capital management in a wider and more academic perspective and present case studies of the value chains of industries as instrumental in theoretical contributions and practical contributions as complementary to theoretical contributions and conclusions. The principal assumption of this thesis is that selffinancing of value chains can be established through effective working capital management. Thus, the thesis introduces the financial value chain analysis method which is employed in the empirical studies. The effectiveness of working capital management of the value chains is studied through the cycle time of working capital. The financial value chain analysis method employed in this study is designed for considering value chain level phenomena. This method provides a holistic picture of the value chain through financial figures. It extends the value chain analysis to the industry level. Working capital management is studied by the cash conversion cycle that measures the length (days) of time a company has funds tied up in working capital, starting from the payment of purchases to the supplier and ending when remittance of sales is received from the customers. The working capital management practices employed in the automotive, pulp and paper and information and communication technology industries have been studied in this research project. Additionally, the Finnish pharmaceutical industry is studied to obtain a deeper understanding of the working capital management of the value chain. The results indicate that the cycle time of working capital is constant in the value chain context over time. The cash conversion cycle of automotive, pulp and paper, and ICT industries are on average 70, 60 and 40 days, respectively. The difference is mainly a consequence of the different cycle time of inventories. The financial crisis of 2008 affected the working capital management of the industries similarly. Both the cycle time of accounts receivable and accounts payable increased between 2008 and 2009. The results suggest that the companies of the automotive, pulp and paper and ICT value chains were not able to self-finance. Results do not indicate the improvement of value chains position in regard to working capital management either. The findings suggest that companies operating in the Finnish pharmaceutical industry are interested in developing their own working capital management, but collaboration with the value chain partners is not considered interesting. Competition no longer occurs between individual companies, but between value chains. Therefore the financial value chain analysis method introduced in this thesis has the potential to support value chains in improving their competitiveness.

Targeted measures bring the greatest benefits for environmental protection in agriculture final report of the TEHO Plus project (2011–2014)

Targeted measures bring the greatest benefits for environmental protection in agriculture final report of the TEHO Plus project (2011–2014). Particular priority areas of the project activities included creating a training package for agri-environment advisers and testing it, farm-specific advisory services and exploitation of experiences of advice provision, putting together an information package of agri-environment issues, farm-level experiments, and development of water quality monitoring. The recommendations issued by advisers on targeting environmental measures were based on utilising geographical information material and nutrient balances. The project was implemented in cooperation by Southwest Finland Centre for Economic Development, Transport and the Environment, MTK-Satakunta and MTK-Varsinais-Suomi. The project received funding from the Ministry of Agriculture and Forestry and the Ministry of the Environment. Participating farmers, with whom environmental advice was developed and experiments were carried out, were important partners for the project. The operating area of the project was Satakunta and Varsinais-Suomi in Southwest Finland, but its outcomes can be exploited nationally. A national perspective was ensured by close cooperation with actors in different provinces. This final report describes project experiences and outcomes including environmental advisory services, training of agri-environmental advisers, farm visits and the feedback received from farmers on agri-environmental advice, development of water quality monitoring, experiments and project work.

Linking supplier delivery risk to outbound delivery service performance improvement

Customer satisfaction should be the main focus for all of the parts of the business. Usually supply chain behind the business is in a key role when this focus is pursued especially in repair service business. When focusing on the materials that are needed to make repairs to equipment under service contracts, the time aspect of quality is critical. Do late deliveries from supplier have an effect on the service performance of repairs when distribution center of a centralized purchasing unit is acting as a buffer between suppliers and repair service business? And if so, how should the improvement efforts be prioritized? These are the two main questions that this thesis focuses on. Correlation and linear regression was tested between service levels of supplier and distribution center. Percentage of on-time deliveries were compared to outbound delivery service level. It was found that there is statistically significant correlation between inbound and outbound operations success. The other main question of the thesis, improvement prioritization, was answered by creating material availability based supplier classification and additional to that, by developing the decision process for the analysis of most critical suppliers. This was built on a basis of previous supplier and material classification methods.

Accuracy improvement of a demand forecasting model

This research concerns different statistical methods that assist to increase the demand forecasting accuracy of company X’s forecasting model. Current forecasting process was analyzed in details. As a result, graphical scheme of logical algorithm was developed. Based on the analysis of the algorithm and forecasting errors, all the potential directions for model future improvements in context of its accuracy were gathered into the complete list. Three improvement directions were chosen for further practical research, on their basis, three test models were created and verified. Novelty of this work lies in the methodological approach of the original analysis of the model, which identified its critical points, as well as the uniqueness of the developed test models. Results of the study formed the basis of the grant of the Government of St. Petersburg.

Tuotekehitysprosessin suorituskyvyn parantaminen pienikokoisessa tuotekehitysorganisaatiossa

Tutkimuksen tavoite on selvittää tuotekehitysprosessin vaiheet ja niihin vaikuttavia tekijöi-tä sekä löytää keinoja, joilla parantaa pienikokoisen tuotekehitysorganisaation tuotekehi-tysprosessia ja tuotekehitystoimintaa. Tutkimuksessa selvitettiin, miten hyvin kohdeor-ganisaation tuotekehitysprosessi vastaa teoriamääritelmiä dokumenttitarkasteluna. Lisäksi kartoitettiin kohdeorganisaation tuotekehitystoiminnan nykytilaa ja haastattelemalla henkilökuntaa. Tutkimusote on toiminta-analyyttinen. Kohdeorganisaatiolla on dokumentoitu tuotekehitysprosessi, josta käy ilmi vaiheet, kriteerit ja vastuut. Prosessi vastaa teoriamääritelmiä sitä paremmin, mitä lähemmäksi prosessin loppua siirrytään. Haastatteluista tuli ilmi, että kohdeorganisaation vahvuudet ovat työntekijöiden osaamisessa ja asenteessa sekä työilmapiirissä. Suurimpia kehityskohtia ovat resurssitilanne ja tuotemäärittelyjen taso. Kohdeorganisaatiossa on liian vähän teki-jöitä tehtävämäärään nähden ja tuotemäärittelyt muuttuvat usein prosessin aikana. Seu-rauksena on mm. aikataulujen venyminen ja suunnittelun laadun heikkeneminen. Tuote-kehitystoiminta nähtiin pääasiassa tuotteiden tuotteistamisessa, ei tuoteideoiden kehittä-misessä. Tuotekehitysprosessin tuntemus vaihtelee ja asiakastarpeet eivät ole tuotekehi-tykselle selvät. Lisäksi henkilökunta ei tunne täysin suorituskyvyn mittareita ja menossa olevia kehityshankkeita. Prosessin kriteerien päivitys ja painotus etupään tehtäviin parantaisi prosessia etenkin prosessin loppupään toiminnoissa. Toiminnan parantamiseksi resursointitilannetta pitää parantaa ja tuotemäärittelyjen analysointiin tulee panostaa enemmän. Lisäksi koulutus prosessista, asiakastarpeista, mittaamisesta ja kehityshankkeista parantaisi kokonaisku-van ymmärtämistä ja näin ollen toiminnan taso parantuisi. Innovaatiotoiminnan ja ideoin-nin lisäämiseksi tulisi tutkia, mitä mahdollisuuksia toiminnan lisäämiseksi on.

Improvement of bovine ß-lactoglobulin production and secretion by Lactococcus lactis

The stabilizing effects of staphylococcal nuclease (Nuc) and of a synthetic propeptide (LEISSTCDA, hereafter called LEISS) on the production of a model food allergen, bovine ß-lactoglobulin (BLG), in Lactococcus lactis were investigated. The fusion of Nuc to BLG (Nuc-BLG) results in higher production and secretion of the hybrid protein. When LEISS was fused to BLG, the production of the resulting protein LEISS-BLG was only slightly improved compared to the one obtained with Nuc-BLG. However, the secretion of LEISS-BLG was dramatically enhanced (~10- and 4-fold higher than BLG and Nuc-BLG, respectively). Finally, the fusion of LEISS to Nuc-BLG resulting in the protein LEISS-Nuc-BLG led to the highest production of the hybrid protein, estimated at ~8 µg/ml (~2-fold higher than Nuc-BLG). In conclusion, the fusions described here led to the improvement of the production and secretion of BLG. These tools will be used to modulate the immune response against BLG via delivery of recombinant lactococci at the mucosal level, in a mouse model of cow's milk allergy.

Improvement of adynamic bone disease after renal transplantation

Low bone remodeling and relatively low serum parathyroid hormone (PTH) levels characterize adynamic bone disease (ABD). The impact of renal transplantation (RT) on the course of ABD is unknown. We studied prospectively 13 patients with biopsy-proven ABD after RT. Bone histomorphometry and bone mineral density (BMD) measurements were performed in the 1st and 12th months after RT. Serum PTH, 25-hydroxyvitamin D, 1,25-dihydroxyvitamin D, and osteocalcin were measured regularly throughout the study. Serum PTH levels were slightly elevated at transplantation, normalized at the end of the third month and remained stable thereafter. Bone biopsies performed in the first month after RT revealed low bone turnover in all patients, with positive bone aluminum staining in 5. In the 12th month, second biopsies were performed on 12 patients. Bone histomorphometric dynamic parameters improved in 9 and were completely normalized in 6, whereas no bone mineralization was detected in 3 of these 12 patients. At 12 months post-RT, no bone aluminum was detected in any patient. We also found a decrease in lumbar BMD and an increase in femoral BMD. Patients suffering from ABD, even those with a reduction in PTH levels, may present partial or complete recovery of bone turnover after successful renal transplantation. However, it is not possible to positively identify the mechanisms responsible for the improvement. Identifying these mechanisms should lead to a better understanding of the physiopathology of ABD and to the development of more effective treatments.

Trabeculectomy and optic nerve head topography

The objective of the present study was to evaluate changes in optic nerve head parameters, measured by confocal laser tomography, before and after trabeculectomy in order to identify outcome measures for the management of glaucoma. The optic nerve head of 22 eyes (22 patients) was analyzed by confocal laser tomography with the Heidelberg retinal tomogram (HRT) before and after trabeculectomy. The median time between the first HRT and surgery was 4.6 months (mean: 7.7 ± 8.3) and the median time between surgery and the second HRT was 10.8 months (mean: 12.0 ± 6.8). The patients were divided into two groups, i.e., those with the highest (group A) and lowest (group B) intraocular pressure (IOP) change after surgery. Differences in the 12 standard topographic parameters before and after surgery for each group were evaluated by the Wilcoxon signed rank test and the differences in these parameters between the two groups were compared by the Mann-Whitney rank sum test. Multiple regression analysis was used to evaluate the influence of the change in IOP (deltaIOP and deltaIOP%) and the changes in the other parameters. There were significant differences in the HRT measures before and after surgery in group A only for cup volume. In group B, no parameter was statistically different. The changes in group A were not significantly different than those in group B for any parameter (P > 0.004, Bonferroni correction for multiple comparisons). deltaIOP and deltaIOP% had a statistically significant effect on delta cup disk area, delta cup volume and delta mean cup depth. Changes in cup shape size were influenced significantly only by deltaIOP. Some optic disc parameters measured by HRT presented a significant improvement after filtering surgery, depending on the amount of IOP reduction. Long-term studies are needed to determine the usefulness of these findings as outcome measures in the management of glaucoma.

Suorituskyvyn johtamisjärjestelmän jalkauttamisen ja tehokkaan käyttämisen edistäminen bioenergia- ja lämpöliiketoimialalla

Tämän tutkimuksen tavoitteena on selvittää suorituskyvyn johtamisjärjestelmän jalkauttamisen, tehokkaan käyttämisen ja jatkuvan parantamisen kulttuurin luomisen edistäviä tekijöitä bioenergia- ja lämpöliiketoimialalla. Tämä tutkimus tukee kohdeorganisaation suorituskyvyn johtamisjärjestelmän implementointiprosessia. Tutkimuksen mukaan suorituskyvyn johtamisjärjestelmän jalkauttamista tukee kolme tärkeää tekijää: johdon ja henkilöstön sitoutuminen, mittariston hyödyllisyyden näkeminen ja mittariston rakenne ja sisältö. Johdon ja henkilöstön sitoutumista sekä mittariston hyödyllisyyden näkemistä edistävät oikeanlainen viestintä, mittariston ymmärtäminen ja liiketoimintaa tukevat mittarit. Mittareiden käyttöönottoa edistävät ymmärrettävät ja luotettavat mittarit sekä kannustimet. Tutkimuksen mukaan suorituskykymittariston tehokasta käyttämistä tukevat mittareiden ajantasaisuus ja mittaustiedon hyödyntäminen liiketoiminnassa. Mittariston tehokasta käyttämistä edistävät mittariston muutosherkkyys, käyttäjäläheinen kehittäminen ja mittareiden liittäminen palkitsemiseen. Jatkuvan parantamisen kulttuurin luomista edistävät mittaristoon ja organisaatioon liittyvät tekijät mm. organisaatiokulttuuri ja johtamistyyli sekä mittariston muutosherkkyys.

Green welding in practice

Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.

A double-blind comparison of the effect of the antipsychotics haloperidol and olanzapine on sleep in mania

The effects of haloperidol and olanzapine on polysomnographic measures made in bipolar patients during manic episodes were compared. Twelve DSM-IV mania patients were randomly assigned to receive either haloperidol (mean ± SD final dosage: 5.8 ± 3.8 mg) or olanzapine (mean ± SD final dosage: 13.6 ± 6.9 mg) in a 6-week, double-blind, randomized, controlled clinical trial. One-night polysomnographic evaluation was performed before and after the haloperidol or olanzapine treatment. Psychopathology and illness severity were rated respectively with the Young Mania Rating Scale (YMRS) and the Clinical Global Impressions - Bipolar version (CGI-BP). There was a significant improvement in the YMRS and CGI-BP scores at the end of the study for both groups. Mixed ANOVA used to compare the polysomnographic measures of both drugs demonstrated significant improvement in sleep measures with olanzapine. In the olanzapine group, statistically significant time-drug interaction effects on sleep continuity measures were observed: sleep efficiency (mean ± SEM pre-treatment value: 6.7 ± 20.3%; after-treatment: 85.7 ± 10.9%), total wake time (pre-treatment: 140.0 ± 92.5 min; after-treatment: 55.2 ± 44.2 min), and wake time after sleep onset (pre-treatment: 109.7 ± 70.8 min; after-treatment: 32.2 ± 20.7 min). Conversely, improvement of polysomnographic measures was not observed for the haloperidol group (P > 0.05). These results suggest that olanzapine is more effective than haloperidol in terms of sleep-promoting effects, although olanzapine is comparatively as effective as haloperidol in treating mania. Polysomnography records should provide useful information on how manic states can be affected by psychopharmacological agents.

Association of angiotensin-converting enzyme activity and polymorphism with echocardiographic measures in familial and nonfamilial hypertrophic cardiomyopathy

Angiotensin-converting enzyme (ACE) activity and polymorphism contribute significantly to the prognosis of patients with cardiomyopathy. The aim of this study was to determine the activity and type of ACE polymorphism in patients with familial and nonfamilial hypertrophic cardiomyopathy (HCM) and to correlate these with echocardiographic measurements (echo-Doppler). We studied 136 patients (76 males) with HCM (69 familial and 67 nonfamilial cases). Mean age was 41 ± 17 years. DNA was extracted from blood samples for the polymerase chain reaction and the determination of plasma ACE levels. Left ventricular mass, interventricular septum, and wall thickness were measured. Mean left ventricular mass index, interventricular septum and wall thickness in familial and nonfamilial forms were 154 ± 63 and 174 ± 57 g/m² (P = 0.008), 19 ± 5 and 21 ± 5 mm (P = 0.02), and 10 ± 2 and 12 ± 3 mm (P = 0.0001), respectively. ACE genotype frequencies were DD = 35%, ID = 52%, and II = 13%. A positive association was observed between serum ACE activity and left ventricular mass index (P = 0.04). Logistic regression showed that ACE activity was twice as high in patients with familial HCM and left ventricular mass index ≥190 g/m² compared with the nonfamilial form (P = 0.02). No other correlation was observed between ACE polymorphisms and the degree of myocardial hypertrophy. In conclusion, ACE activity, but not ACE polymorphisms, was associated with the degree of myocardial hypertrophy in the patients with HCM.

Celecoxib reduces symptoms in men with difficult chronic pelvic pain syndrome (Category IIIA)

We investigated the effectiveness of celecoxib in reducing symptoms in patients with difficult chronic pelvic pain syndrome (CPPS), NIH category IIIA. Sixty-four patients with category IIIA CPPS were randomized into two groups of 32 subjects each. One group was treated with celecoxib (200 mg daily) and the other with placebo. All patients underwent treatment for 6 weeks and were evaluated clinically before (baseline) and after 1, 2, 4, 6, and 8 weeks of treatment. The evaluation included the NIH Chronic Prostatitis Symptom Index (NIH-CPSI) and a subjective global assessment (SGA). Repeated measures analysis of variance was used to evaluate treatment and time effects and their interaction. A decrease (means ± SD) in total NIH-CPSI score from 23.91 ± 5.27 to 15.88 ± 2.51 in the celecoxib group and from 24.25 ± 5.09 to 19.50 ± 2.50 in the placebo group was observed during treatment (0 to 6 weeks). A statistically significant decrease was observed in pain subscore (P < 0.006), quality of life subscore (P < 0.032) and total NIH-CPSI score (P < 0.015) after 2, 4 and 6 weeks, but not in urinary subscore. In addition, 38% of the celecoxib and 13% of the placebo subjects had at least a moderate improvement in SGA. The trend was similar for the NIH-CPSI scores. However, the response to treatment in terms of total NIH-CPSI score or subscore was not significantly different from placebo after interruption of treatment for 2 weeks. Our results show that celecoxib provides significant symptomatic improvement limited to the duration of the therapy in patients with difficult category IIIA CPPS compared to placebo.

Body composition measures of obese adolescents by the deuterium oxide dilution method and by bioelectrical impedance

The objectives of the present study were to describe and compare the body composition variables determined by bioelectrical impedance (BIA) and the deuterium dilution method (DDM), to identify possible correlations and agreement between the two methods, and to construct a linear regression model including anthropometric measures. Obese adolescents were evaluated by anthropometric measures, and body composition was assessed by BIA and DDM. Forty obese adolescents were included in the study. Comparison of the mean values for the following variables: fat body mass (FM; kg), fat-free mass (FFM; kg), and total body water (TBW; %) determined by DDM and by BIA revealed significant differences. BIA overestimated FFM and TBW and underestimated FM. When compared with data provided by DDM, the BIA data presented a significant correlation with FFM (r = 0.89; P < 0.001), FM (r = 0.93; P < 0.001) and TBW (r = 0.62; P < 0.001). The Bland-Altman plot showed no agreement for FFM, FM or TBW between data provided by BIA and DDM. The linear regression models proposed in our study with respect to FFM, FM, and TBW were well adjusted. FFM obtained by DDM = 0.842 x FFM obtained by BIA. FM obtained by DDM = 0.855 x FM obtained by BIA + 0.152 x weight (kg). TBW obtained by DDM = 0.813 x TBW obtained by BIA. The body composition results of obese adolescents determined by DDM can be predicted by using the measures provided by BIA through a regression equation.