Comparison between two surgical techniques for prenatal correction of meningomyelocele in sheep

OBJECTIVE: To compare the classical neurosurgical technique with a new simplified technique for prenatal repair of a myelomeningocelelike defect in sheep. METHODS: A myelomeningocele-like defect (laminectomy and dural excision) was created in the lumbar region on day 90 of gestation in 9 pregnant sheep. Correction technique was randomized. In Group 1 the defect was corrected using the classic neurosurgical technique of three-layer suture (dura mater, muscle and skin closure) performed by a neurosurgeon. In Group 2, a fetal medicine specialist used a biosynthetic cellulose patch to protect the spinal cord and only the skin was sutured above it. Near term (day 132 of gestation) fetuses were sacrificed for pathological analysis. RESULTS: There were two miscarriages and one maternal death. In total, six cases were available for pathological analysis, three in each group. In Group 1, there were adherence of the spinal cord to the scar (meningo-neural adhesion) and spinal cord architecture loss with posterior funiculus destruction and no visualization of grey matter. In Group 2, we observed in all cases formation of a neo-dura mater, separating the nervous tissue from adjacent muscles, and preserving the posterior funiculus and grey matter. CONCLUSION: The new simplified technique was better than the classic neurosurgical technique. It preserved the nervous tissue and prevented the adherence of the spinal cord to the scar. This suggests the current technique used for the correction of spina bifida in humans may need to be reassessed.

Reasoning about shadows in a mobile robot environment

This paper describes a logic-based formalism for qualitative spatial reasoning with cast shadows (Perceptual Qualitative Relations on Shadows, or PQRS) and presents results of a mobile robot qualitative self-localisation experiment using this formalism. Shadow detection was accomplished by mapping the images from the robot’s monocular colour camera into a HSV colour space and then thresholding on the V dimension. We present results of selflocalisation using two methods for obtaining the threshold automatically: in one method the images are segmented according to their grey-scale histograms, in the other, the threshold is set according to a prediction about the robot’s location, based upon a qualitative spatial reasoning theory about shadows. This theory-driven threshold search and the qualitative self-localisation procedure are the main contributions of the present research. To the best of our knowledge this is the first work that uses qualitative spatial representations both to perform robot self-localisation and to calibrate a robot’s interpretation of its perceptual input.

Influence of HSM cutting parameters on the surface integrity characteristics of hardened AISI H13 steel

The purpose of this study is to evaluate the influence of the cutting parameters of high-speed machining milling on the characteristics of the surface integrity of hardened AISI H13 steel. High-speed machining has been used intensively in the mold and dies industry. The cutting parameters used as input variables were cutting speed (v c), depth of cut (a p), working engagement (a e) and feed per tooth (f z ), while the output variables were three-dimensional (3D) workpiece roughness parameters, surface and cross section microhardness, residual stress and white layer thickness. The subsurface layers were examined by scanning electron and optical microscopy. Cross section hardness was measured with an instrumented microhardness tester. Residual stress was measured by the X-ray diffraction method. From a statistical standpoint (the main effects of the input parameters were evaluated by analysis of variance), working engagement (a e) was the cutting parameter that exerted the strongest effect on most of the 3D roughness parameters. Feed per tooth (f z ) was the most important cutting parameter in cavity formation. Cutting speed (v c) and depth of cut (a p) did not significantly affect the 3D roughness parameters. Cutting speed showed the strongest influence on residual stress, while depth of cut exerted the strongest effect on the formation of white layer and on the increase in surface hardness.

Non-Markovian stochastic processes and their applications: from anomalous diffusion to time series analysis

This work provides a forward step in the study and comprehension of the relationships between stochastic processes and a certain class of integral-partial differential equation, which can be used in order to model anomalous diffusion and transport in statistical physics. In the first part, we brought the reader through the fundamental notions of probability and stochastic processes, stochastic integration and stochastic differential equations as well. In particular, within the study of H-sssi processes, we focused on fractional Brownian motion (fBm) and its discrete-time increment process, the fractional Gaussian noise (fGn), which provide examples of non-Markovian Gaussian processes. The fGn, together with stationary FARIMA processes, is widely used in the modeling and estimation of long-memory, or long-range dependence (LRD). Time series manifesting long-range dependence, are often observed in nature especially in physics, meteorology, climatology, but also in hydrology, geophysics, economy and many others. We deepely studied LRD, giving many real data examples, providing statistical analysis and introducing parametric methods of estimation. Then, we introduced the theory of fractional integrals and derivatives, which indeed turns out to be very appropriate for studying and modeling systems with long-memory properties. After having introduced the basics concepts, we provided many examples and applications. For instance, we investigated the relaxation equation with distributed order time-fractional derivatives, which describes models characterized by a strong memory component and can be used to model relaxation in complex systems, which deviates from the classical exponential Debye pattern. Then, we focused in the study of generalizations of the standard diffusion equation, by passing through the preliminary study of the fractional forward drift equation. Such generalizations have been obtained by using fractional integrals and derivatives of distributed orders. In order to find a connection between the anomalous diffusion described by these equations and the long-range dependence, we introduced and studied the generalized grey Brownian motion (ggBm), which is actually a parametric class of H-sssi processes, which have indeed marginal probability density function evolving in time according to a partial integro-differential equation of fractional type. The ggBm is of course Non-Markovian. All around the work, we have remarked many times that, starting from a master equation of a probability density function f(x,t), it is always possible to define an equivalence class of stochastic processes with the same marginal density function f(x,t). All these processes provide suitable stochastic models for the starting equation. Studying the ggBm, we just focused on a subclass made up of processes with stationary increments. The ggBm has been defined canonically in the so called grey noise space. However, we have been able to provide a characterization notwithstanding the underline probability space. We also pointed out that that the generalized grey Brownian motion is a direct generalization of a Gaussian process and in particular it generalizes Brownain motion and fractional Brownain motion as well. Finally, we introduced and analyzed a more general class of diffusion type equations related to certain non-Markovian stochastic processes. We started from the forward drift equation, which have been made non-local in time by the introduction of a suitable chosen memory kernel K(t). The resulting non-Markovian equation has been interpreted in a natural way as the evolution equation of the marginal density function of a random time process l(t). We then consider the subordinated process Y(t)=X(l(t)) where X(t) is a Markovian diffusion. The corresponding time-evolution of the marginal density function of Y(t) is governed by a non-Markovian Fokker-Planck equation which involves the same memory kernel K(t). We developed several applications and derived the exact solutions. Moreover, we considered different stochastic models for the given equations, providing path simulations.

Enzimi, acidi organici ed altri metaboliti coinvolti nella patogenesi di Penicillium spp

Blue mould caused by Penicillium expansum Link is one of the most destructive rot of pome fruit in all growing areas (Snowdon, 1990; Jones and Aldwinckle, 1991; Tonini,1996) In the past, Penicillium rot has been controlled by fungicide postharvest treatment mainly by thiabendazole (TBZ) and benomyl (Hardenburg and Spalding, 1972), but their intense use produced the appearance of resistant strains with a great reduction of their activity The aims of the present study were to characterize the isolates of Pencillium sp causing blue mold on pear in Italy by physiological and biochemical parameters. In particular differencing also the behavior of isolates to relationship with sensitivity or resistance to TBZ treatments. We have examined the early stage of infection in relation to enzyme activity, local modulation of pH, production of organic acids, and to secondary metabolism of pathogen. The results described here confirm that the majority of P. expansum isolates from pears packing houses are resistant to TBZ, Among the TBZ-resistant isolates scored in this work, different isolates (RR) showed higher percentage of conidial germination on TBZ-amended medium compared to non amended medium. This may indicate a stimulatory effect of TBZ on conidial germination. Therefore TBZ treatments are not only ineffective for controlling P. expansum, but they may also increase the severity of blue mould on fruits. In the absence of fungicide, isolates showed a significant difference for infection severity, R and RR isolates are characterized by higher pathogenic fitness on fruits, producing larger lesions than S isolates. These data are supported by the study with laboratory-induced resistant isolates, which shows the lack of correlation between TBZ resistance and osmotic sensitivity, and highlights the association between TBZ resistance and infection severity (Baraldi et al 2003). Enzymatic screening gave a positive reaction to esterase, urease, pectinase activity, in addition, the pathogen is able to synthesize a complex enzyme act to degrade the main components of the cell wall especially pectin and cellulose. Isolated sensitive and resistant are characterized by a good activity of pectinase, especially from poligactoronase, which, as already reported by several studies (D'hallewin et al, 2004; Prusky et al, 2004), are the basis of degradative process of cell wall. Also, although the measure was minor also highlighted some activities of cellulase, but even note in the production of this kind of cellulase and hemicellulase P. Expansum were not targeted, studies have found no other source of information in this regard. Twenty isolates of Penicillium expansum, were tested in vitro ad in vivo for acid production ability and pH drop. We have found that modulation of pH and the organic acids extrusion were influence to various parameter:  Initial pH: in general, the greatest reduction of pH was observed in isolates grown at pH 7, except for four isolates that maintained the pH of the medium close to 7, the others significantly decreased the pH, ranging from 5.5 to 4.1.. In extreme acid condition (pH 3,0) growth and modulation of pH is most lower respect optimal condition (pH 5,0). Also isolates R and RR have showed a greater adaptation to environmental condition more than isolates S.  Time: although the acidification continues for some days, PH modulation is strongest in early hours (48-72 hours)of inoculation process. Time also affects the quality of organic acids, for example in vitro results showed an initial abundant production of succinc acid, followed to important production of galacturoinc acid.  Substrates: there are many differences for the type of acids produced in vitro and in vivo. Results showed in vivo an abundant production of galacturonic, malic, and citric acids and some unknown organic acids in smaller concentrations. Secondary metabolite analysis revealed intra-specific differences, and patulin was found in all isolates, but most significant reduction was observed between in vitro and in vivo samples. There was no correlation between the concentration of patulin, and the percentage of infected fruits, but sample with a lower infection severity of rotten area than the others, showed a significantly lower mycotoxin concentration than samples with a higher lesion diameter of rotten area. Beyond of patulin was detected the presence of another secondary metabolite, penitrem A.

Studies on biotic and abiotic elicitors inducing defense responses in tomato

Tomato (Lycopersicon esculentum Mill., Solanum lycopersicon L.) is one of the most popular vegetable throughout the world, and the importance of its cultivation is threatened by a wide array of pathogens. In the last twenty years this plant has been successfully used as a model plant to investigate the induction of defense pathways after exposure to fungal, bacterial and abiotic molecules, showing triggering of different mechanisms of resistance. Understanding these mechanisms in order to improve crop protection is a main goal for Plant Pathology. The aim of this study was to search for general or race-specific molecules able to determine in Solanum lycopersicon immune responses attributable to the main systems of plant defense: non-host, host-specific and induced resistance. Exopolysaccharides extracted by three fungal species (Aureobasidium pullulans, Cryphonectria parasitica and Epicoccum purpurascens), were able to induce transcription of pathogenesis-related (PR) proteins and accumulation of enzymes related to defense in tomato plants cv Money Maker,using the chemical inducer Bion® as a positive control. During the thesis, several Pseudomonas spp. strains were also isolated and tested for their antimicrobial activity and ability to produce antibiotics. Using as a positive control jasmonic acid, one of the selected strain was shown to induce a form of systemic resistance in tomato. Transcription of PRs and reduction of disease severity against the leaf pathogen Pseduomonas syringae pv. tomato was determined in tomato plants cv Money Maker and cv Perfect Peel, ensuring no direct contact between the selected rhizobacteria and the aerial part of the plant. To conclude this work, race-specific resistance of tomato against the leaf mold Cladosporium fulvum is also deepened, describing the project followed at the Phytopathology Laboratory of Wageningen (NL) in 2007, dealing with localization of a specific R-Avr interaction in transfected tomato protoplast cultures through fluorescence microscopy.

Charakterisierung der Vinorin-Synthase aus Rauvolfia serpentina durch Reinigung, Expression, Mutation und Kristallisation

ABSTRACTDie vorliegende Arbeit befasste sich mit der Reinigung,heterologen Expression, Charakterisierung, molekularenAnalyse, Mutation und Kristallisation des EnzymsVinorin-Synthase. Das Enzym spielt eine wichtige Rolle inder Ajmalin-Biosynthese, da es in einerAcetyl-CoA-abhängigen Reaktion die Umwandlung desSarpagan-Alkaloids 16-epi-Vellosimin zu Vinorin unterBildung des Ajmalan-Grundgerüstes katalysiert. Nach der Reinigung der Vinorin-Synthase ausHybrid-Zellkulturen von Rauvolfia serpentina/Rhazya strictamit den fünf chromatographischen TrennmethodenAnionenaustauschchromatographie an SOURCE 30Q, HydrophobeInteraktionen Chromatographie an SOURCE 15PHE,Chromatographie an MacroPrep Ceramic Hydroxyapatit,Anionenaustauschchromatographie an Mono Q undGrößenausschlußchromatographie an Superdex 75 konnte dieVinorin-Synthase aus 2 kg Zellkulturgewebe 991fachangereichert werden.Das nach der Reinigung angefertigte SDS-Gel ermöglichte eineklare Zuordnung der Protein-Bande als Vinorin-Synthase.Der Verdau der Enzymbande mit der Endoproteinase LysC unddie darauffolgende Sequenzierung der Spaltpeptide führte zuvier Peptidsequenzen. Der Datenbankvergleich (SwissProt)zeigte keinerlei Homologien zu Sequenzen bekannterPflanzenenzyme. Mit degenerierten Primern, abgeleitet voneinem der erhaltenen Peptidfragmente und einer konserviertenRegion bekannter Acetyltransferasen gelang es, ein erstescDNA-Fragment der Vinorin-Synthase zu amplifizieren. Mit derMethode der RACE-PCR wurde die Nukleoidsequenzvervollständigt, was zu einem cDNA-Vollängenklon mit einerGröße von 1263 bp führte, der für ein Protein mit 421Aminosäuren (46 kDa) codiert.Das Vinorin-Synthase-Gen wurde in den pQE2-Expressionsvektorligiert, der für einen N-terminalen 6-fachen His-tagcodiert. Anschließend wurde sie erstmals erfolgreich in E.coli im mg-Maßstab exprimiert und bis zur Homogenitätgereinigt. Durch die erfolgreiche Überexpression konnte dieVinorin-Synthase eingehend charakterisiert werden. DerKM-Wert für das Substrat Gardneral wurde mit 20 µM, bzw.41.2 µM bestimmt und Vmax betrug 1 pkat, bzw. 1.71 pkat.Nach erfolgreicher Abspaltung des His-tags wurden diekinetischen Parameter erneut bestimmt (KM- Wert 7.5 µM, bzw.27.52 µM, Vmax 0.7 pkat, bzw. 1.21 pkat). Das Co-Substratzeigt einen KM- Wert von 60.5 µM (Vmax 0.6 pkat). DieVinorin-Synthase besitzt ein Temperatur-Optimum von 35 °Cund ein pH-Optimum bei 7.8.Homologievergleiche mit anderen Enzymen zeigten, dass dieVinorin-Synthase zu einer noch kleinen Familie von bisher 10Acetyltransferasen gehört. Alle Enzyme der Familie haben einHxxxD und ein DFGWG-Motiv zu 100 % konserviert. Basierendauf diesen Homologievergleichen und Inhibitorstudien wurden11 in dieser Proteinfamilie konservierte Aminosäuren gegenAlanin ausgetauscht, um so die Aminosäuren einer in derLiteratur postulierten katalytischen Triade(Ser/Cys-His-Asp) zu identifizieren.Die Mutation aller vorhandenen konservierten Serine undCysteine resultierte in keiner Mutante, die zumvollständigen Aktivitätsverlust des Enzyms führte. Nur dieMutationen H160A und D164A resultierten in einemvollständigen Aktivitätsverlust des Enzyms. Dieses Ergebniswiderlegt die Theorie einer katalytischen Triade und zeigte,dass die Aminosäuren H160A und D164A exklusiv an derkatalytischen Reaktion beteiligt sind.Zur Überprüfung dieser Ergebnisse und zur vollständigenAufklärung des Reaktionsmechanismus wurde dieVinorin-Synthase kristallisiert. Die bis jetzt erhaltenenKristalle (Kristallgröße in µm x: 150, y: 200, z: 200)gehören der Raumgruppe P212121 (orthorhombisch primitiv) anund beugen bis 3.3 Å. Da es bis jetzt keine Kristallstruktureines zur Vinorin-Synthase homologen Proteins gibt, konntedie Struktur noch nicht vollständig aufgeklärt werden. ZurLösung des Phasenproblems wird mit der Methode der multiplenanomalen Dispersion (MAD) jetzt versucht, die ersteKristallstruktur in dieser Enzymfamilie aufzuklären.

Photoemissions-Elektronenmikroskopie an Adsorbatsystemen

Die Photoemissions-Elektronenmikroskopie ist eine hervorragend geeignete Methode zur Untersuchung dynamischer Vorgänge auf realen polykristallinen Oberflächen im sub-μm Bereich. Bei der Anwendung auf Adsorbatsysteme lassen sich geringe Bedeckungsunterschiede, sowie Adsorbatstrukturen und -phasen unterscheiden. Die Methode erlaubt dabei ein breites Anwendungsspektrum über weite Temperaturbereiche und Systeme unterschiedlichster Bindungsenergie. Bei der Chemisorption von Sauerstoff auf polykristallinen Metallen wird unterschiedliches Aufwachsverhalten in den Helligkeitswerten im Mikroskopbild widergespiegelt. Bei Kupferproben zeigen Oberflächen mit unterschiedlicher kristalliner Richtung aufgrund der Symmetrie des fcc-Gitters ein ähnliches Verhalten. Das hexagonale Gitter des Titans zeigt dagegen große Unterschiede im Adsorptionsverhalten in Abhängigkeit der kristallinen Richtung. Diese Unterschiede konnten auf verschiedene Haftkoeffizienten und Oxidationsstufen der Metalle zurückgeführt werden. In einem Modell zur Photostromanalyse konnte beim Kupfer der Übergang von verschiedenen Überstrukturen bei wachsender Bedeckung gezeigt und die Übergänge ermittelt werden.. Auf den Titanoberflächen wurde so das Wachstum der Oxide TiO, TiO₂ und Ti₂O₃ unterschieden und die Übergänge des unterschiedlichen Wachstums ermittelt. Bei der thermischen Desorption der Schichten konnten unterschiedliche Haftkoeffizient auf einzelnen Kristalliten qualitativ gezeigt werden. Diese erstmalig eingesetzte Analysemethode weist Ähnlichkeiten zur Thermo-Desorptions-Spektroskopie (TDS) auf, zeigt jedoch ortsaufgelöst lokale Unterschiede auf polykristallinen Oberflächen. Bei thermisch gestützten Oberflächenreaktionen ließen sich die Reaktionskeime deutlich identifizieren und mit einer Grauwertanalyse konnte die Oxidation der karbidischen Lagen zu Kohlenmonoxid und die Metalloxidation unterschieden werden. Dabei konnte gezeigt werden, daß die Reaktionskeime nur an Plattengrenzen auftreten, nicht jedoch auf der Oberfläche. Durch die Aufrauhung der Plattengrenzen mit zunehmender Reaktionsdauer nimmt die Zahl der Reaktionskeime kontinuierlich zu, die laterale Ausdehnung der Einzelreaktionen bleibt aber konstant. Bei der Physisorption von Xenon auf Graphit wurde erstmals für die Photoemissionsmikroskopie die resonanten Anregung ausgenutzt. Die verschiedenen Phasen des Adsorbats können dabei deutlich unterschieden werden; bei niedrigen Temperaturen (40K) findet ein gleichmäßiges Wachstum auf der gesamten Oberfläche statt, bei höheren Temperaturen von 60-65K ist dagegen ein Inselwachstum in verschiedenen Phasen zu beobachten. Die zeitliche Entwicklung des Wachstums, die örtliche Lage der Phasen und die Phasenübergänge (gas, fest inkommensurabel, fest kommensurabel) konnten bestimmt werden. Bei der Desorption der Schichten konnten die einzelnen Phasen ebenfalls getrennt werden und das unterschiedliche Desorptionsverhalten sowie die Phasenübergänge selber verifiziert werden.

Generation of a NG2-EYFP mouse for studying the properties of NG2-expressing cells

A range of vectors were made in which the EYFP gene or the Cre gene were inserted in the start codon of the NG2 gene. The NG2-EYFP vectors were used to generate NG2-EYFP “knockin” mice by homologous recombination. The F1 generation showed lack of EYFP expression, due to NeoR cassette interference. Excision of the NeoR, by breeding the F1 generation to ELLA-Cre mice allowed proper expression of EYFP. NG2-EYFP heterozygous mice were characterized in detail for astrocytic, neurogenic and oligodendrocytic properties through antibody labeling. NG2-EYFP+ cells did not label for the astrocyte marker GFAP, but some cells did express S100 Beta. The cells did not label with any neuronal markers like Beta III tubulin, Neun, and double cortin, but many of the NG2-EYFP+ cells made intimate contacts to the neurons. These contacts are widespread throughout the grey and white matter of the brain. The NG2-EYFP+ cells did label for oligodendrocyte markers like PDGFα-R, NG2, Olig2, O4, and Sox 10. There were a few cells termed phantom cells that did label for NG2, but had no EYFP expression. This could have been caused by improper excision of the NeoR cassette in the F2 generation. The heterozygous mouse is a tool to allow the characterization of the in vivo properties of the NG2+ cells. Breeding of these mice to homozygosity yielded an NG2-knockout mouse, which was also subjected to initial characterization. The NG2-EYFP homozygous showed equivalent cell labeling results to the NG2-EYFP heterozygous mouse, but the phantom cells disappeared in the knockout. The results show that the NG2 cells are a heterogenous population that does not express astrocytic or neuronal markers. The homozygous mouse is an ideal tool to further dissect the properties of the cells, lacking NG2 in vivo.

Studio di catalisi termoattivate per compositi poliuretanici

One of the key processing parameters in thermoset composites manufacturing is to have an optimum balance between open time and cure time. Long open times followed with a fast cure profile (also referred as snap cure or “hockey stick” shaped profiles) are required on applications like Pultrusion, Filament Winding, Resin Transfer Molding (RTM) and Infusion. In this work, several factors affecting the reactivity of a base line polyurethane formulation were studied. The addition of different components such as internal mold release agents, cross-linker, polyols having different molecular structure and isocyanates having different functionality were studied. A literature search was conducted to identify the main catalyst packages existing in the market. The reactivity of catalyst based on tertiary amines, orgamometallic salts, and co-catalyst of amine-organometallic complexes was characterized. Addition of quelants agents such as thioglycerol and acetyl acetone to delay the catalyst activity were also considered. As a consequence of this work a vast reactivity map was generated. This should guide the formulation designer in future product generations for the further development of the mentioned applications. Recommendations on measurements systems and further areas of exploration are also given.

Osteogenesi imperfetta e Dentinogenesi imperfetta Tipo I: correlazioni cliniche e istologiche

Osteogenesis imperffecta (OI) is a heterogeneous group of heritable connetive tissue diseases, quantity and/or qualitative defect in type 1 collagen syntesis; sometimes and in some types it can be associated to dentinogenesis imperfecta (DI), a hereditary disorder in dentin formation that comprises a group of autosomal dominant genetic conditions characterized by abnormal dentine structure affecting either the primary or both the primary and secondary dentitions. Aim: the aim of this study was to assess the correlation between OI and DI from both a clinical and histological point of view, clarifying the structural and ultrastructural changes. Eighteen children (&-15 years aged) with diagnosis of OI were examined for dental alterations referable to DI; for each patient, the OI type (I, III, IV) was recorded. Extracted or normally exfolied teeth were subjected to a histological examination.Results: a total of eleven patients had abnormal discolourations referable to DI: five patients were affected by OI type I, three by OI III, and three patients by OI type IV. The discolourations, yellow/brown or oplaescent grey, could not be related to the different types of OI. Histological exam of primary teeth showed severe pathological change in dentin, structured into four diffeent layers. A collagen defect due to odontoblast dysfunction was theorized to be on the base of the histological changes. Conclusions: there is no correlation between the type of OI and the type of discolouration. The underlying dentinal defect seems to be related to an odontoblast dysfunction.

Analisi sperimentale dell'influenza dei parametri di processo sulla resistenza di contatto tra polimero e stampo durante la formatura

Con gli strumenti informatici disponibili oggi per le industrie, in particolar modo coi software CAE, le possibile simulare in maniera più che soddisfacente i fenomeni fisici presenti in natura. Anche il raffreddamento di un manufatto in polimero può venire simulato, a patto che si conoscano tutti i dati dei materiali e delle condizioni al contorno. Per quanto riguarda i dati dei materiali, i produttori di polimeri sono molto spesso in grado di fornirli, mentre le condizioni al contorno devono essere padroneggiate dal detentore della tecnologia. Nella pratica, tale conoscenza è al più incompleta, quindi si fanno ipotesi per colmare le lacune. Una tra le ipotesi più forti fatte è quella di una perfetta conduzione all'interfaccia tra due corpi. Questo è un vincolo troppo forte, se paragonato alla precisione di tutti gli altri dati necessari alla simulazione, e quindi si è deciso di eseguire una campagna sperimentale per stimare la resistenza al passaggio flusso termico all'interfaccia polimero-stampo ovvero determinare la conduttanza termica di contatto. L'attività svolta in questa tesi di dottorato ha come scopo quello di fornire un contributo significativo allo sviluppo e al miglioramento dell'efficienza termica degli stampi di formatura dei polimeri termoplastici con tecnologia a compressione.

Genomische Analyse von natürlichen Killerzell-Rezeptorgenen in nicht-humanen Primaten

Natürliche Killerzell-Rezeptoren, die MHC-Klasse-I-Moleküle binden, sind im Leukozyten Rezeptor Komplex (LRC) und im Natürlichen Killer Komplex (NKC) kodiert. Die Bindung klassischer MHC-Klasse-I-Moleküle erfolgt im Menschen durch die im LRC kodierten polymorphen Killerzell-Immunglobulin-ähnlichen Rezeptoren (KIR) und in Nagetieren durch die im NKC kodierten polymorphen C-Typ Lektin-ähnlichen Ly49-Rezeptoren. Die ebenfalls im NKC kodierten C-Typ Lektin-ähnlichen CD94/NKG2-Rezeptoren sowie der NKG2D-Rezeptor sind sowohl im Menschen als auch in Nagetieren konserviert und wenig polymorph. Im Rahmen dieser Arbeit wurde das CD94-Ly49L-Intervall der NKC-Region in einem Neuweltaffen, dem Weißbüschelaffen (Callithrix jacchus), sowie einem Feuchtnasenaffen, dem Grauen Mausmaki (Microcebus murinus), über Screening von BAC-Banken und Sequenzanalyse von BAC-Contigs untersucht. Das CD94-Ly49L-Intervall im Weißbüschelaffen hat eine Länge von 171 kb und weist orthologe Gene zu den humanen NKC-Genen auf. Eine Ausnahme bildet das Gen NKG2CE, welches äquidistant zu den humanen Genen NKG2C und NKG2E ist. NKG2F und Ly49L sind Pseudogene. Expressionsanalysen der NKC-Gene in neun Weißbüschelaffen-Individuen lieferten einen mäßigen Grad an allelischen Polymorphismen. Alternative Spleißprodukte wurden für CD94, NKG2D und NKG2A identifiziert. Für NKG2A wurden verschiedene Transkripte mit potentiell unterschiedlichen Translationsstartpunkten gefunden. Im Grauen Mausmaki beträgt die Länge des CD94-Ly49L-Intervalls 489 kb. CD94 und die NKG2-Gene sind vervielfacht und wesentlich polymorpher als im Menschen und im Weißbüschelaffen. Expressionsanalysen der NKC-Gene wurden im Grauen Mausmaki und einem weiteren madagassischen Lemuren, dem Schwarzweißen Vari (Varecia variegata), durchgeführt und zeigten, dass CD94 und die NKG2-Gene im Vari ebenfalls vervielfacht sind. Die NKG2-Moleküle der Lemuren weisen unterschiedliche Kombinationen an aktivierenden und inhibierenden Signalmotiven auf und üben somit möglicherweise diverse Funktionen aus. Ly49L stellt in den Lemuren einen potentiell funktionellen inhibierenden Rezeptor dar und NKG2D besitzt im Vergleich zum humanen NKG2D-Protein eine verkürzte Zytoplasmaregion. Alternative Spleißprodukte der NKC-Gene existieren auch in den Lemuren. Darüber hinaus wurden mehrere CD94-Gene in einem weiteren Feuchtnasenaffen, dem Potto (Perodicticus potto) und einem Trockennasenaffen, dem Philippinen-Koboldmaki (Tarsius syrichta), nachgewiesen. Ein Alu-Element, welches ausschließlich in Intron 4 der CD94-Sequenzen des Philippinen-Koboldmakis auftritt, deutet darauf hin, dass sich CD94 in der Linie der Koboldmakis und in der Linie der Feuchtnasenaffen unabhängig voneinander vervielfacht hat. Die vervielfachten, polymorphen CD94/NKG2-Rezeptoren der niederen Primaten stellen möglicherweise das funktionelle Äquivalent zu den polymorphen KIR der höheren Primaten und den polymorphen Ly49-Rezeptoren der Nagetiere dar.

High frequency acoustics in colloid-based meso- and nanostructures by spontaneous Brillouin light scattering

Materials that can mold the flow of elastic waves of certain energy in certain directions are called phononic materials. The present thesis deals essentially with such phononic systems, which are structured in the mesoscale (<1 µm), and with their individual components. Such systems show interesting phononic properties in the hypersonic region, i.e., at frequencies in the GHz range. It is shown that colloidal systems are excellent model systems for the realization of such phononic materials. Therefore, different structures and particle architectures are investigated by Brillouin light scattering, the inelastic scattering of light by phonons.rnThe experimental part of this work is divided into three chapters: Chapter 4 is concerned with the localized mechanical waves in the individual spherical colloidal particles, i.e., with their resonance- or eigenvibrations. The investigation of these vibrations with regard to the environment of the particles, their chemical composition, and the influence of temperature on nanoscopically structured colloids allows novel insights into the physical properties of colloids at small length scales. Furthermore, some general questions concerning light scattering on such systems, in dispute so far, are convincingly addressed.rnChapter 5 is a study of the traveling of mechanical waves in colloidal systems, consisting of ordered and disordered colloids in liquid or elastic matrix. Such systems show acoustic band gaps, which can be explained geometrically (Bragg gap) or by the interaction of the acoustic band with the eigenvibrations of the individual spheres (hybridization gap).rnWhile the latter has no analogue in photonics, the presence of strong phonon scatterers, when a large elastic mismatch between the composite components exists, can largely impact phonon propagation in analogy to strong multiple light scattering systems. The former is exemplified in silica based phononic structures that opens the door to new ways of sound propagation manipulation.rnChapter 6 describes the first measurement of the elastic moduli in newly fabricated by physical vapor deposition so-called ‘stable organic glasses’. rnIn brief, this thesis explores novel phenomena in colloid-based hypersonic phononic structures, utilizing a versatile microfabrication technique along with different colloid architectures provided by material science, and applying a non-destructive optical experimental tool to record dispersion diagrams.rn

Untersuchungen zur Lebensweise und zur Populationskontrolle des Gemeinen Ohrwurms Forficula auricularia L. (Insecta, Dermaptera) in Rebanlagen

Der Gemeine Ohrwurm (Forficula auricularia LINNAEUS 1758) wurde bisher im Weinbau als natürlicher Gegenspieler verschiedener Rebschädlinge zu den Nützlingen gezählt. Etwa seit 2005 verursacht er aufgrund stark ansteigender Populationsdichten Schäden in pfälzischen Rebanlagen. Ohrwürmer halten sich massenhaft in den Trauben auf. Zusammen mit ihren Exkrementen geraten sie bei der Lese in großer Zahl ins Erntegut. Die Tiere werden von der weinbaulichen Praxis als sehr störend und qualitätsmindernd empfunden und ihre Einstufung als Nützling kritisch gesehen. Aufgrund dieser Problematik wurde im Mai 2007 ein durch den Forschungsring des Deutschen Weinbaus (FDW) finanziertes Forschungsprojekt am Dienstleistungszentrum Ländlicher Raum Rheinpfalz in Neustadt an der Weinstraße begonnen. Bis 2010 wurden offene Fragen zur Erfassung und Populationsbiologie des Gemeinen Ohrwurms in Rebanlagen bearbeitet, die von ihm verursachten Schäden beschrieben und Strategien zu seiner Befallsregulation entwickelt. Am Boden aktive Ohrwürmer wurden mit Bodenfallen nach BARBER (1931) aufgenommen. In der Laubwand des Rebstockes wurden die Ohrwürmer mit eigens konzipierten Bambusfallen erfasst. F. auricularia ist in pfälzischen Rebanlagen die dominierende Ohrwurm-Art. Im Projektverlauf wurde der univoltine Entwicklungszyklus des Gemeinen Ohrwurms in pfälzischen Rebanlagen vollständig aufgeklärt. In der Vegetationsperiode beeinflussten die Intensität der Bodenbewirtschaftung mit der resultierenden Flächenbegrünung, die Bodenart, die Lufttemperatur, die Luftfeuchtigkeit und die Niederschlagsmenge die Befallsdichten am Rebstock signifikant. Der Ohrwurm-Befall in den Trauben war signifikant von der Kompaktheit und vom Gewicht der Trauben sowie dem Fäulnisanteil pro Traube und von eingewachsenen Rebblättern in den Trauben abhängig. Das Überwinterungs- und Brutverhalten wurde durch die Art und Weise der Bodenbewirtschaftung beeinflusst beziehungsweise gestört.rnLabor- und Freilandversuche haben gezeigt, dass F. auricularia Pilzpathogene wie die Graufäule (Botrytis cinerea PERSOON 1794) und den Pinselschimmel (Penicillium crustosum THOM 1930) auf gesunde Trauben überträgt. Ferner haben Fraßversuche ergeben, dass der Ohrwurm nur faule und vorgeschädigte Beeren anfressen kann und keine intakten Beeren verletzt. Durch analytische und sensorische Untersuchungen wurde festgestellt, dass Ohrwurm-Kot sensorische Fehltöne im Wein verursachen kann. Diese werden durch das im Kot enthaltene 2-Methyl-1,4-benzochinon hervorgerufen, das eine Komponente des arteigenen Abwehrsekrets ist. Da sich der Ohrwurm jahreszeitlich bedingt entweder im Boden oder am Rebstock aufhält, wurden befallsregulierende Maßnahmen im Boden- und Laubwandbereich der Rebanlage durchgeführt. Durch Tiefengrubbern mit Umbruch der Begrünung im Herbst und Frühjahr wurden die überwinternden Imagines und die Gelege geschädigt, so dass in der darauf folgenden Vegetationsperiode die Befallsdichten in der Laubwand geringfügig aber nicht signifikant abnahmen. Die während der Aufwanderungsphase der Ohrwürmer Ende Juni durchgeführte mechanische Störung der Begrünung reduzierte den Ohrwurm-Befall am Rebstock bis zu drei Wochen nach der Maßnahme signifikant. In der Laubwand der Rebstöcke wurden die Befallsdichten durch die Insektizide SpinTor (Wirkstoff Spinosad: 0,01%) und Steward® (Wirkstoff Indoxacarb: 0,0125 %) sowie sekundär durch partielles Entblättern der Laubwand dauerhaft bis zur Traubenlese reduziert. rn