Climate change and global responsibility - the role of energy consumption, GDP and CO2 emissions

Climate change is one of the biggest challenges faced by this generation. Despite being the single most important environmental challenge facing the planet and despite over two decades of international climate negotiations, global greenhouse gas (GHG) emissions continue to rise. By the middle of this century, GHGs must be reduced by as much as 40-70% if dangerous climate change is to be avoided. In the Kyoto Protocol no quantitative emission limitation and reduction commitments were placed on the developing countries. For the planning of the future commitments period and possible participation of developing countries, information of the functioning of the energy systems, CO2 emissions development in different sectors, energy use and technological development in developing countries is essential. In addition to the per capita emissions, the efficiency of the energy system in relation to GHG emissions is crucial for the decision of future long-term burden sharing between countries. Country’s future development of CO2 emissions can be defined by the estimated CO2 intensity of the future and the estimated GDP growth. The changes in CO2 intensity depend on several factors, but generally developed countries’ intensity has been increasing in the industrialization phase and decreasing when their economy shifts more towards the system dominated by the service sector. The level of the CO2 intensity depends by a large extent on the production structure and the energy sources that are used. Currently one of the most urgent issues regarding global climate change is to decide the future of the Kyoto Protocol. Negotiations on this topic have already been initiated, with the aim of being finalised by the 2015. This thesis provides insights into the various approaches that can be used to characterise the concept of comparable efforts for developing countries in a future international climate agreement. The thesis examines the post-Kyoto burden sharing questions for developing countries using the contraction and convergence model, which is one approach that has been proposed to allocate commitments regarding future GHG emissions mitigation. This new approach is a practical tool for the evaluation of the Kyoto climate policy process and global climate change negotiations from the perspective of the developing countries.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Characterization and Investigation on Material Compatibilities of Building Integrated Photovoltaic Module Components

Building Integrated Photovoltaics (BIPV) are considered as the future of photovoltaic (PV) technology. The advantage of BIPV system is its multi-functionality; they fulfil the functions of a building envelope with the added benefit of generating power by replacing the traditional roofing and façade materials with PV that generate power. In this thesis, different types of PV cells and modules have been described in detail with their efficiencies and usage trends in the last decade. The different BIPV products for roof and façade are discussed in detail giving several examples. The electricity generation potential of BIPV in selected countries is compared with their actual electricity consumption. Further, the avoided greenhouse gas (GHG) emissions associated with electricity generation from traditional sources and transportation and distribution (T&D) losses are calculated. The results illustrate huge savings in GHGs. In BIPV different types of façade and backsheets are used. In this thesis, selected backsheets and façade were characterized in terms of their surface structure identification using infrared spectroscopy (FTIR-ATR), scanning electron microscopy with energy dispersive X-ray (SEM-EDX) and physical characterization using surface energy measurements. By using FTIR-ATR, surface polymeric materials were identified and with SEM-EDX, identification of the surface elements was possible. Surface energy measurements were useful in finding the adhesives and knowing the surface energies of the various backsheets and façade. The strength of adhesion between the facade and backsheets was studied using peel test. Four different types of adhesives were used to study the fracture pattern and peel tests values to identify the most suitable adhesive. It was found out that pretreatment increased the adhesive strength significantly.

Response of soybean genotypes to the expression of green seed under temperature and water stresses

Soybeans grown under water stress associated with high temperatures during seed maturation and pre-harvest may produce green seed (GS) with expressive reduction in seed quality. The objectives of this study were to evaluate the response of different soybean cultivars grown under these stressful conditions regarding their susceptibility to GS production and to determine the chlorophyll retention levels and the chlorophyllase activity in the seeds. Seeds of four soybean cultivars [BRS 133, CD 206, MG/BR 46 (Conquista) and BRSMG 251 (Robusta)] were grown under greenhouse conditions until R5.5. At R6, the plants were transferred to phytotrons under temperature stress (from 28ºC to 36ºC) and with water stresses of 10% gravimetric moisture, no water and normal supply. Seeds were harvested at R9 when the percentage of GS and weight of 100 seeds were determined. The contents of a, b and total chlorophylls and the chlorophyllase activity were also determined. The expression of GS production under these conditions varied among cultivars: Conquista and Robusta were considered more susceptible to the production of GS compared to 'BRS 133' and 'CD 206'. These cultivars produced lower GS levels, lower chlorophyll retention and higher chlorophyllase activity compared to Robusta and Conquista. Soybean plants submitted to water and temperature stresses produced high levels of GS, which were small, light and had high chlorophyll contents and low chlorophyllase activity. The contents of a, b and total chlorophylls in GS were inversely proportional to the chlorophyllase activity.

Incidence of green soybean seeds as a function of environmental stresses during seed maturation

Hot and dry weather conditions during soybean [Glycine max (L.) Merrill] seed maturation can cause forced maturation of the seed, resulting in the production of high levels of green seed, which may be detrimental to seed germination. These stressful conditions were imposed on soybean plants during seed maturation to investigate the production of green seeds and seed quality. Plants of the CD 206 cultivar were grown in a greenhouse until the R5.5 growing stage and then transferred to phytotrons at R6 and R7.2 for stress induction. Plants were subjected to two temperature regimes, high (28ºC to 36ºC) and normal (19ºC to 26ºC), and four soil water availability conditions, control (adequate water supply), 30% gravimetric moisture (GM), 20% GM and no water supply. Seed were harvested at R9. Green seed percentages and 100-seed weights from the lower, middle and upper thirds of each plant were determined. Seed quality was assessed by germination, tetrazolium (viability and vigor) and electrical conductivity tests. Occurrence of green seed varied from 9% to 86%, depending on the severity of the stresses imposed. High temperature, coupled with no water supply at R6, resulted in a pronounced occurrence of green seeds. There was no difference in the percentage of green seeds among the plant segments. Seed quality was negatively affected by the incidence of green seeds. A procedure for screening soybean genotypes in a phytotron for their tolerance and/or susceptibility to the production of green seeds was developed.

Changes in canola plant architecture and seed physiological quality in response to different sowing densities

The aim of this study was to evaluate changes in canola yield components and seed physiological quality in response to different sowing densities. The study was made in a greenhouse at the REIPESOL Company Technological Center, Madrid - Spain, with the commercial "Toccata" hybrid variety. The initial sowing density was 360,000 plants/ha and the plant population was later thinned down to include treatments of 250 and 180 thousand plants/ha. Harvested seeds were sent to the Seed Technology Center Laboratory (CATES) at the Madrid Polytechnic University (UPM) to evaluate changes in plant architecture and yield components, as well as the seed physiological quality of different plant parts. Results demonstrated that canola plants showed changes in morphology and yield components in response to different sowing densities. The population of 250,000 plants/ha showed the best seed yield demonstrating that maximum yield is directly related to a correct sowing density. The number of pods/plant was the most important component for increased seed yield/plant and seed yield/area. The spatial distribution of canola seeds in the plant and canola sowing density did not affect seed physiological quality.

Floral biology and characterization of seed germination in physic nut (Jatropha curcas L.)

The objective of this study was to characterize morphologically the seed germination and floral biology of Jatropha curcas grown in Viçosa, Minas Gerais state. The floral biology study was made on fresh inflorescences of 20 plants. For the post-seminal development study, the seeds were submitted to laboratory and greenhouse germination test. J. curcas has flowers of both sexes within the same inflorescence, with each inflorescence having an average of 131 flowers, being 120 male and 10.5 female flowers. Low numbers of hermaphrodite flowers were also found, ranging from 0 to 6 flowers per inflorescence. The germination of J. curcas begins on the third day with radicle protrusion in the hilum region. The primary root is cylindrical, thick, glabrous and branches rapidly, with about 4-5 branches three days after protrusion, when the emergence of the secondary roots begins. Seed coat removal occurs around the 8th day, when the endosperm is almost totally degraded and offers no resistance to the cotyledons that expand between the 10th and 12th day. A normal seedling has a long greenish hypocotyl, two cotyledons, a robust primary root and several lateral roots. On the 12th day after sowing, the normal seedling is characterized as phanerocotylar and germination is epigeal.

Global coordination: weighted voting

In order to halt the depletion of global ecological capital, a number of different kinds of meetings between Governments of countries in the world has been scheduled. The need for global coordination of environmental policies has become ever more obvious, supported by more and more evidence of the running down of ecological capital. But there are no formal or binding arrangements in sight, as global environmental coordination suffers from high transaction costs (qualitative voting). The CO2 equivalent emissions, resulting in global warming, are driven by the unstoppable economic expansion in the global market economy, employing mainly fossil fuel generated energy, although at the same time lifting sharply the GDP per capita of several emerging countries. Only global environmental coordination on the successful model of the World Band and the IMF (quantitative voting) can stem the rising emissions numbers and stop further environmental degradation. However, the system of weighted voting in the WB and the IMF must be reformed by reducing the excessive voting power disparities, for instance by reducing all member country votes by the cube root expression.

Vuotovesien merkitys jätevesihuollossa

Yleisimmät viemäröintijärjestelmät ovat erillisviemäröinti ja sekaviemäröinti. Erillisviemä-röinnissä jäte- ja hulevedet johdetaan omissa verkostoissa. Sekaviemäröinnissä kaikki viemä-röitävät vedet virtaavat samassa verkostossa. Vuotoveden osuus jätevesiviemäriverkostossa virtaavasta jätevedestä on keskimäärin yli 30 prosenttia. Vuotovesiselvityksen avulla pyritään selvittämään vuotoveden esiintymisalueet ja mahdolliset vuotokohteet. Mallintamalla laadittu selvitys tarjoaa mahdollisuuden tarkastella verkostoa kokonaisuutena ja erilaisissa käyttötilan-teissa. Tämä työ perustuu Joensuun kantakaupungin viemäriverkostosta mallintamalla laadit-tuun vuotovesiselvitykseen. Työssä on tarkoitus selvittää vuotovesistä aiheutuvan lisäener-giantarpeen ja kasvihuonekaasupäästöjen kasvua sekä pohtia verkoston omistussuhteiden, sään ääri-ilmiöiden ja taajuusmuuttajien vaikutuksia vuotovesien hallintaan. Lisäksi selvitetään voidaanko tuloksista tehdä valtakunnallisia yleistyksiä. Joensuun viemäriverkostossa jätevesien pumppaukseen käytetystä energiasta noin 43 prosent-tia kuluu vuotovesien pumppaukseen. Siitä aiheutuu vuosittain 480 MWh:n lisäenergiantarve, joka johtaa 106 tonnin hiilidioksidipäästöihin. Lisäenergiantarpeesta aiheutuva hiilidioksidi-päästö on pieni liikenteen aiheuttamaan päästöön verrattuna. Saneerauksilla voidaan saavuttaa 60 prosentin vähennys vuotovesimäärään. Tavoitteeksi tulisi asettaa keskusta-alueella olevien sekaviemäreiden korvaaminen erillisviemäreillä esimerkiksi lähimmän 10 vuoden aikana ja vuotovesimäärän yleinen vähentäminen koko verkoston alueella. Ilmastonmuutoksen myötä yleistyvät rankkasateet lisäävät vuotovesimäärää etenkin sekaviemäröidyillä alueilla. Tämä korostaa sekaviemäröidyn verkoston korjaustoimenpiteiden tärkeyttä. Taajuusmuuttajien yleistyvä käyttö tasaa haitallisia virtaamapiikkejä. Optimaaliseksi säädetty pyörimisnopeus pienentää merkittävästi pumppujen energiankulutusta. Työstä saadut tulokset ovat valtakun-nallisella tasolla suuntaa antavia. Tarkemmat yleistykset vaativat useista erikokoisista verkos-toista tehtyjen vuotovesiselvitystulosten analysointia.

Design and Material Selection of High-Speed Rotating Electrical Machines

The increasing emphasis on energy efficiency is starting to yield results in the reduction in greenhouse gas emissions; however, the effort is still far from sufficient. Therefore, new technical solutions that will enhance the efficiency of power generation systems are required to maintain the sustainable growth rate, without spoiling the environment. A reduction in greenhouse gas emissions is only possible with new low-carbon technologies, which enable high efficiencies. The role of the rotating electrical machine development is significant in the reduction of global emissions. A high proportion of the produced and consumed electrical energy is related to electrical machines. One of the technical solutions that enables high system efficiency on both the energy production and consumption sides is high-speed electrical machines. This type of electrical machines has a high system overall efficiency, a small footprint, and a high power density compared with conventional machines. Therefore, high-speed electrical machines are favoured by the manufacturers producing, for example, microturbines, compressors, gas compression applications, and air blowers. High-speed machine technology is challenging from the design point of view, and a lot of research is in progress both in academia and industry regarding the solution development. The solid technical basis is of importance in order to make an impact in the industry considering the climate change. This work describes the multidisciplinary design principles and material development in high-speed electrical machines. First, high-speed permanent magnet synchronous machines with six slots, two poles, and tooth-coil windings are discussed in this doctoral dissertation. These machines have unique features, which help in solving rotordynamic problems and reducing the manufacturing costs. Second, the materials for the high-speed machines are discussed in this work. The materials are among the key limiting factors in electrical machines, and to overcome this limit, an in-depth analysis of the material properties and behavior is required. Moreover, high-speed machines are sometimes operating in a harsh environment because they need to be as close as possible to the rotating tool and fully exploit their advantages. This sets extra requirements for the materials applied.

Side View

The view of the alumni greenhouse from the west side.

The carbon disclosure project, an evolution in international environmental corporate governance : motivations and determinants of market response to voluntary disclosures

This paper examines the factors associated with Canadian firms voluntarily disclosing climate change information through the Carbon Disclosure Project. Five hypotheses are presented to explain the factors influencing management's decision to disclose this information. These hypotheses include a response to shareholder activism, domestic institutional investor shareholder activism, signalling, litigation risk, and low cost publicity. Both binary logistic regressions as well as a cross-sectional analysis of the equity market's response to the environmental disclosures being made were used to test these hypotheses. Support was found for shareholder activism, low cost publicity, and litigation risk. However, the equity market's response was not found to be statistically significant.

Educating for Community Resilience: How the Work of Thomas Homer-Dixon and JohnDewey's Pattern of Inquiry Can Help Us Prepare for the Ecological and Social Challenges of the 21st Century

Scientists have overwhelmingly concluded that global warming occurs as a consequence of human activities and that climate change, combined with the depletion of resources, could have catastrophic consequences for the human civilization later this century. However, in political circles and in the public sphere these conclusions are not taken seriously, or they are laid aside for future generations to deal with; at the same time, significant efforts are being deployed to discredit the scientific evidence. In this thesis I have studied the positions of climate scientists as well as those of climate change deniers, and I also examined how their points of view are likely to impact the interests and habits of corporations and citizens. The work of Thomas Homer-Dixon was used as an important source for analyzing the complex interaction between our natural, economic, and social systems, and John Dewey's pattern of inquiry provided the theoretical foundation for an analysis of the current crisis and its possible solutions. No concerted action to deal with climate change has yet been taken by the leaders of the Western world; I corroborated data from four reliable sources (Hansen, 2009; IPCC, 2007; Lynas, 2007; Steffen, 2011) regarding several development scenarios and their likely consequences on greenhouse gas emissions, and I concluded that a future temperature increase of more than 2°C appears now as unavoidable. In the light of this conclusion I argue that education for increasing the resilience of smaller communities is a realistic alternative that can offer some hope in dealing with the challenges ahead.

Des enjeux juridiques concernant l'efficacité des systèmes d'échange de droits d'émission

Ce mémoire décrit et analyse différents types de systèmes d'échange de droits d'émission utilisés dans le cadre de politiques de gestion de la pollution atmosphérique. L'objectif premier est de répertorier des enjeux juridiques étant liés à l'efficacité de ces systèmes. Dans un premier temps, nous nous attardons à la structure et aux mécanismes internes des systèmes d'échange de droits d'émission. Tout d'abord, nous soulignons le fondement théorique de ce type de système. Nous évaluons par la suite la structure et certains litiges liés au système d'échange américain dans le cadre des émissions de dioxyde de soufre. Dans un deuxième temps, nous continuons la description de systèmes en nous attardant plus spécifiquement aux interactions entre les systèmes d'échange de droits d'émission et les autres politiques et règlementations environnementales (incluant d'autres systèmes d'échange d'émission) visant la même problématique environnementale.

La lutte contre les changements climatiques comme problème de justice distributive internationale

Ce mémoire est structuré en deux parties connexes : la première tente d’établir les fondements de la justice distributive dans le contexte des changements climatiques ; la seconde analyse six principes distributifs susceptibles d’éclairer l’élaboration des politiques internationales d’atténuation de l’effet de serre : les principes d’égalité, de priorité, de contraction & convergence, du « pollueur-payeur », de responsabilité historique, et de capacité. En ce qui concerne les fondements, les paradigmes de biens publics mondiaux et de droits humains fondamentaux semblent offrir de solides assises pour comprendre le caractère obligatoire de la justice climatique. Concernant l’adoption des principes distributifs, une perspective plurielle permet d’apporter un éclairage unique sur différents aspects de la distribution des quotas d’émissions et de rendre compte avec plus de force des raisons pour lesquelles les nations désignées comme étant responsables ont le devoir moral de passer à l’action.