Neural bruise prediction models for fruit handling and machinery evaluation.

Some neural bruise prediction models have been implemented in the laboratory, for the most traded fruit species and varieties, allowing the prediction of the acceptability or rejectability for damages, with respect to the EC Standards. Different models have been built for both quasi-static (compression) and dynamic (impact) loads covering the whole commercial ripening period of fruits. A simulation process has been developed gathering the information on laboratory bruise models and load sensor calibrations for different electronic devices (IS-100 and DEA-1, for impact and compression loads respectively). Some evaluation methodology has been designed gathering the information on the mechanical properties of fruits and the loading records of electronic devices. The evaluation system allows to determine the current stage of fruit handling process and machinery.

Influence of fruit turgidity and firmness on apple bruise susceptibility.

Bruise damage is a major cause of quality loss for apples. It would be very useful to establish a method of characterizing bruise susceptibility in order to improve fruit handling, sometimes Magness-Taylor firmness is used as an indirect guide to handling requirements. The objective of the present work was to achieve a better bruise susceptibility prediction.

A quality assessment system for fresh fruits in hypermarkets and fruit trading centres.

When the fresh fruit reaches the final markets from the suppliers, its quality is not always as good as it should, either because it has been mishandled during transportation or because it lacks an adequate quality control at the producer level, before being shipped. This is why it is necessary for the final markets to establish their own quality assessment system if they want to ensure to their customers the quality they want to sell. In this work, a system to control fruit quality at the last level of the distribution channel has been designed. The system combines rapid control techniques with laboratory equipment and statistical sampling protocols, to obtain a dynamic, objective process, which can substitute advantageously the quality control inspections carried out visually by human experts at the reception platform of most hypermarkets. Portable measuring equipment have been chosen (firmness tester, temperature and humidity sensors...) as well as easy-to-use laboratory equipment (texturometer, colorimeter, refractometer..,) combining them to control the most important fruit quality parameters (firmness, colour, sugars, acids). A complete computer network has been designed to control all the processes and store the collected data in real time, and to perform the computations. The sampling methods have been also defined to guarantee the confidence of the results. Some of the advantages of a quality assessment system as the proposed one are: the minimisation of human subjectivity, the ability to use modern measuring techniques, and the possibility of using it also as a supplier's quality control system. It can be also a way to clarify the quality limits of fruits among members of the commercial channel, as well as the first step in the standardisation of quality control procedures.

Fruit by fruit identification of mealy peaches. Extraction of storage features.

Mealiness is a negative attribute of sensory texture, characterised by the lack of juiciness decrease in the total amount of of water content of tissues. Peach mealy textures are known as \ and leatheriness. Besides the lack of juiciness and flavour, that characterises mealy fruits, in associated with internal browning near the stone and an incapacity of ripening although there i ripe appearance. It is considered as a physiological disorder that appears in stone fruits probably < unbalanced pectolitic enzyme activity during storage. Since January 1996, a wide EC Project entitled: "Mealiness in fruits. Consumer perception and i detection" is being carried out. Within it, the Physical Properties Laboratory (ETSIA-UPM) working to develop instrumental procedures to detect mealiness in different types of fruits (s contributions by Barreiro to AgEng). The results obtained have shown to correlate well with \ measurements in apples (Barreiro et al), also we have succeeded in identifying individual mealy j the basis of instrumental measurement in peaches. The definition of these texture categories will be used in further studies as a base for new individual classification.

Resistance to malathion and lambda-cyhalothrin in Ceratitis capitata (Wiedemann) (Diptera: Tephritidae)

La mosca mediterránea de la fruta, Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), es una de las plagas de mayor incidencia económica en cítricos y otros frutales a nivel mundial. En España las medidas de control de esta plaga en cítricos, desde mediados de los 90 hasta 2009, se basaron principalmente en el monitoreo de las poblaciones y en la aplicación de tratamientos aéreos y terrestres con malatión cebo. Sin embargo, desde la retirada en la Unión Europea en 2009 de los productos fitosanitarios que contienen malatión, los insecticidas más utilizados para el control de esta plaga han sido lambda-cihalotrina y spinosad. En 2004-2005 se detectaron poblaciones españolas de C. capitata resistentes a malatión. Esta resistencia se ha asociado a una mutación (G328A) en la acetilcolinesterasa (AChE), a una duplicación del gen de la AChE (Ccace2) (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas (posiblemente aliesterasas). Sin embargo, cuando se secuenció la aliesterasa CcE7 en individuos de una línea resistente a malatión, no se encontró ninguna de las mutaciones (G137D y/o W251L/S/G) asociadas a resistencia en otras especies, si bien se encontraron otras mutaciones al compararlos con individuos de una línea susceptible. Asimismo, mediante la selección en laboratorio de una línea resistente a malatión (W-4Km) con lambda-cihalotrina, se ha podido obtener una línea resistente a lambda-cihalotrina (W-1K). Finalmente, se ha demostrado la capacidad de esta especie para desarrollar resistencia a spinosad mediante selección en laboratorio. Los múltiples mecanismos de resistencia identificados evidencian el potencial de esta especie para desarrollar resistencia a insecticidas con diferentes modos de acción. Los objetivos de esta tesis doctoral son: 1) evaluar la susceptibilidad de poblaciones españolas de campo de C. capitata a lambda-cihalotrina y dilucidar los mecanismos de resistencia en la línea W-1Kλ; 2) comparar la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A); y 3) investigar el papel de las mutaciones identificadas en la aliesterasa CcαE7 en la resistencia a malatión. Estos estudios son de utilidad para el desarrollo de estrategias de manejo de la resistencia que puedan prevenir o retrasar la aparición de resistencia y aumentar la sostenibilidad de los insecticidas disponibles para el control de esta plaga. Nuestros resultados indican que las poblaciones españolas de C. capitata analizadas han desarrollado resistencia a lambda-cihalotrina. Los valores de CL50 estimados para las poblaciones recogidas en la Comunidad Valenciana, Cataluña y Andalucía oscilaron entre 129 ppm y 287 ppm, igualando o sobrepasando la concentración recomendada para los tratamientos de campo (125 ppm). Estos resultados contrastan con los obtenidos con tres poblaciones de campo recogidas en Túnez, cuya susceptibilidad fue similar a la de la línea control (C). La línea resistente a lambda-cihalotrina W-1K se continuó seleccionando en el laboratorio alcanzándose unos niveles de resistencia de 205 veces con respecto a la línea C, siendo su CL50 (4224 ppm) más de 30 veces superior a la concentración recomendada para los tratamientos de campo. Esta línea resistente mostró altos niveles de resistencia cruzada a deltametrina (150 veces) y a etofenprox (240 veces), lo que sugiere que el desarrollo de resistencia a lambda-cihalotrina podría comprometer la eficacia de otros piretroides para el control de esta plaga. Hemos demostrado que la resistencia de la línea W-1K a lambda-cihalotrina fue casi completamente suprimida por el sinergista PBO, lo que indica que las enzimas P450 desempeñan un papel muy importante en la resistencia a este insecticida. Sin embargo, tanto las moscas de la línea susceptible C como las de la línea resistente W-1K perdieron inmediatamente la capacidad de caminar (efecto “knock-down”) al ser tratadas tópicamente con lambda-cihalotrina, lo que sugiere que la resistencia no está mediada por alteraciones en la molécula diana (resistencia tipo “kdr”). La resistencia metabólica mediada por P450 fue analizada comparando la expresión de 53 genes CYP (codifican enzimas P450) de las familias CYP4, CYP6, CYP9 y CYP12 en adultos de la línea resistente W-1K y de la línea susceptible C. Nuestros resultados muestran que el gen CYP6A51 (número de acceso GenBank XM_004534804) fue sobreexpresado (13-18 veces) en la línea W-1K. Por otra parte, la expresión del gen CYP6A51 fue inducida tanto en adultos de la línea W-1K como de la línea C al ser tratados con lambda-cihalotrina. Sin embargo, no se obtuvieron diferencias significativas entre la línea susceptible C y la línea resistente W-1K al comparar la cantidad de P450 y la actividad NADPH-citocromo c reductasa presente en fracciones microsomales obtenidas a partir de abdómenes. Asimismo, no hemos podido correlacionar el metabolismo de deltametrina, estimado in vitro mediante la incubación de este insecticida con fracciones microsomales, con el nivel de resistencia a este piretroide observado en los bioensayos con la línea W-1K. Por otro lado, no se encontró ninguna alteración en la región promotora 5'UTR del gen CYP6A51 (-500 pb desde el inicio de la traducción) que pudiera explicar su sobreexpresión en la línea W-1K. Los datos obtenidos sugieren que la resistencia a lambda-cihalotrina en la línea W-1K está mediada por P450 y que la sobreexpresión de CYP6A51 puede desempeñar un papel importante, aunque se necesitan más evidencias para establecer una asociación directa de la resistencia con este gen. Hemos estudiado la herencia, el coste biológico y la estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A). La línea susceptible C, donde no se encuentra la mutación G328A (genotipo S/S), se cruzó con dos isolíneas establecidas para representar genotipos únicos correspondientes a los dos mecanismos de resistencia asociados a la molécula diana: 1) la isolínea 267Y (genotipo R/R) establecida a partir de una pareja que portaba la mutación G328A en homocigosis; 2) la isolínea 306TY (genotipo RS/RS) establecida a partir de una pareja que portaba en homocigosis la duplicación del gen Ccace2. No se realizaron cruces recíprocos, ya que mediante experimentos de hibridación in situ en cromosomas politénicos se pudo comprobar que el locus de la AChE y la duplicación (probablemente en tándem) se localizan en el cromosoma autosómico 2L. La susceptibilidad al malatión de los parentales resistentes (R/R o RS/RS) y susceptibles (S/S), los cruces F1 (S/R, S/RS y R/RS) y los retrocruzamientos indican que la resistencia a malatión es semi-dominante en ambos casos. Sin embargo, nuestros resultados no fueron concluyentes con respecto a la naturaleza monogénica de la resistencia a malatión en estas isolíneas. Por lo tanto, no podemos descartar que otros genes que contribuyan a la resistencia, además de la mutación G328A (isolínea 267Y) y de la duplicación del gen Ccace2 (isolínea 306TY), puedan haber sido seleccionados durante el proceso de selección de 267Y y 306TY. Varios parámetros biológicos fueron evaluados para determinar si estos dos mecanismos de resistencia a malatión suponen un coste biológico para los genotipos resistentes. Individuos con genotipo R/R mostraron un retraso en el tiempo de desarrollo de huevo a pupa, un peso de pupa reducido y una menor longevidad de los adultos, en comparación con los individuos con genotipo S/S. Sin embargo, el peso de pupa de los individuos con genotipo RS/RS fue similar al de los individuos S/S, y su desarrollo de huevo a pupa intermedio entre S/S y R/R. Estas diferencias en el coste biológico pueden estar relacionadas con la reducción de la eficiencia catalítica de la AChE mutada en los individuos R/R, y al efecto compensatorio que la copia no mutada del gen tiene en los individuos RS/RS que portan la duplicación. La estabilidad de la resistencia a malatión mediada por la mutación G328A y la duplicación se analizó mediante el seguimiento de los caracteres de resistencia en la progenie de retrocruzamientos S/R x R/R y S/RS x RS/RS a lo largo de varias generaciones en ausencia de presión de selección con insecticidas. Nuestros resultados muestran que la frecuencia del alelo que porta la mutación G328A disminuyó desde 67,5% en la primera generación del retrocruzamiento S/R x R/R (75% esperado, asumiendo segregación mendeliana y que sólo hay dos alelos: uno mutado y otro no mutado) a 12% después de 10 generaciones. Por el contrario, la frecuencia de la duplicación sólo disminuyó desde 75% en en la primera generación del retrocruzamiento S/RS x RS/RS (75% esperado, asumiendo segregación Mendeliana y que la duplicación segrega como un único alelo) a 50% en el mismo período, lo que indica que la duplicación es más estable que la mutación. Asimismo, se analizó la presencia de la mutación y de la duplicación en poblaciones de campo recogidas en seis localidades en 2004-2007, cuando todavía se usaba el malatión, y se comparó con poblaciones recogidas en los mismos campos en 2010, un año después de la prohibición del malatión en la Unión Europea. La frecuencia media del genotipo susceptible (S/S) aumentó del 55,9% en el período 2004-2007 a 70,8% en 2010, mientras que la frecuencia de los genotipos portadores de la mutación en homocigosis o heterocigosis (R/R y S/R) disminuyó del 30,4 al 9,2%, los que llevan la duplicación en homocigosis o heterocigosis (RS/RS y S/RS) aumentaron levemente desde 12,8 hasta 13,3%, y los que llevan a la vez la mutación y la duplicación (R/RS) también aumentaron del 1 al 6,7%. Estos resultados son consistentes con que la duplicación del gen Ccace2 (con una copia con la mutación G328A y la otra copia no mutada) es más ventajosa que la mutación G328A por si sola, ya que la duplicación mantiene los niveles de resistencia a la vez que limita el coste biológico. Para investigar la asociación entre la resistencia a malatión y las mutaciones encontradas previamente en CcE7, hemos generado isolíneas con mutaciones específicas seleccionadas por su ubicación próxima a la entrada al centro activo de la enzima. La isolínea Sm2 (procedente de una hembra heterocigota para la mutación V96L y un macho homocigoto para el alelo no mutado) mantuvo altos niveles de resistencia a malatión, incluso después de 30 generaciones sin presión de selección. Por el contrario, la isolínea 267Y (compuesta por individuos homocigotos para la mutación L267Y) y la línea 306TY (compuesta por individuos homocigotos para la doble mutación R306T-N307Y) mostraron una reducción significativa en los niveles de resistencia. También hemos encontrado que la resistencia a malatión de la línea Sm2 fue parcialmente revertida por DEF y TPP, y que Sm2 mostró una reducción significativa en la actividad MTB, como se ha descrito en otras especies que muestran resistencia específica a malatión mediada por aliesterases. Además, fue posible asociar la presencia de la mutación V96L en individuos de la línea Sm2 con supervivencia a una concentración discriminante de malatión (5,000 ppm) y con una baja actividad MTB. Estos resultados sugieren una posible relación entre la mutación V96L en la aliesterasa CcE7 y la resistencia a malatión, aunque todavía no se puede concluir que la resistencia es causada por esta mutación, siendo necesarios más estudios para comprobar su contribución a la resistencia. En conclusión, se ha encontrado por primera vez resistencia a lambda-cihalotrina en poblaciones de campo de C. capitata, y nuestros resultados indican que las P450 son el principal mecanismo de resistencia en la línea W-1K. Esta situación se suma al caso previamente descrito de resistencia en campo a malatión asociada a la mutación G328A, a la duplicación del gen Ccace2 (una de las copias lleva la mutación G328A) y a resistencia metabólica mediada por esterasas. Nuestros resultados también indican que la alteración de la molécula diana AChE parece ser responsable de un cierto nivel de resistencia a malatión en C. capitata, que puede ser estimada como aproximadamente 25-40 veces para la mutación G328A y 40-60 veces para la duplicación; mientras que la resistencia mediada por esterasas y que ha sido asociada en este estudio con la mutación V96L en CcE7 puede conferir un efecto multiplicativo (por un factor de 5 a 10) aumentando la resistencia a malatión a 200-400 veces. Por otra parte, hemos demostrado que los insectos resistentes que llevan la duplicación tienen un coste biológico menor y muestran una estabilidad mayor que aquellos con la mutación G328A en ausencia de presión de selección con insecticidas. Esto representa un escenario en el que los genotipos con la duplicación permanecerán en el campo en frecuencias bajas a moderadas, pero podrían ser seleccionados rápidamente si se utilizan malatión u otros insecticidas que muestren resistencia cruzada. Estos resultados tienen importantes implicaciones para los programas de manejo de la resistencia, ya que el repertorio de insecticidas eficaces para el control de C. capitata es cada vez más limitado. Además, la coexistencia de múltiples mecanismos de resistencia en poblaciones de campo ofrece el potencial para desarrollar resistencia frente a otros insecticidas disponibles para el control de esta plaga. Estrategias para de manejo de la resistencia basadas en la alternancia de insecticidas con diferentes modos de acción, y su combinación con otros métodos de control, deben ser implementadas para evitar el desarrollo de resistencia en campo. ABSTRACT The Mediterranean fruit fly (Medfly), Ceratitis capitata (Wiedemann, 1824) (Diptera: Tephritidae), is one of the most economically damaging pests of citrus and other fruit crops worldwide. Control measures in citrus crops in Spain from the mid 90's to 2009 were mainly based on field monitoring of population levels and aerial and ground treatments with malathion bait sprays. However, since the withdrawal of phytosanitary products containing malathion in the European Union in 2009, lambda-cyhalothrin and spinosad have become the most widely used insecticides for the control of this pest. Resistance to malathion was found in Spanish field populations of C. capitata in 2004-2005. This resistance has been associated with a mutation G328A in the acetylcholinesterase (AChE), a duplication of the AChE gene (Ccace2) (one of the copies bearing the mutation G328A), and metabolic resistance mediated by esterases (probably aliesterases). However, when the gene of the aliesterase CcE7 was sequenced in individuals from a malathion resistant strain of C. capitata, none of the known G137D and/or W251L/S/G mutations associated to resistance in other species were found, though other mutations were detected when compared with individuals from a susceptible strain. Noteworthy, a lambda-cyhalothrin resistant strain (W-1K) was obtained by selecting a field-derived malathion resistant strain (W-4Km) with lambda-cyhalothrin. Moreover, it has also been demonstrated the capacity of this species to develop resistance to spinosad by laboratory selection. The multiple resistance mechanisms identified highlight the potential of this species to develop resistance to insecticides with different modes of action. The objectives of this PhD Thesis are: 1) to assess the susceptibility of Spanish field populations of C. capitata to lambda-cyhalothrin and to elucidate the resistance mechanisms in the W-1Kλ strain; 2) to compare the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A); and 3) to investigate the role of the aliesterase CcαE7 mutations in malathion resistance. All these studies will be of use for devising proactive resistance management strategies that could prevent or delay resistance development and would increase the sustainability of the insecticides available for Medfly control. Our results indicate that Spanish field populations of C. capitata have developed resistance to lambda-cyhalothrin. The LC50 values estimated for populations collected at Comunidad Valenciana, Cataluña and Andalucía ranged from 129 ppm to 287 ppm, equaling or overpassing the recommended concentration for field treatments (125 ppm). These results contrast with those obtained with three different Tunisian field populations, whose susceptibility was similar to that of the control (C) strain. The lambda-cyhalothrin resistant W-1K strain has been further selected to achieve a 205-fold resistance compared to the C strain, being its LC50 (4,224 ppm) more than 30 times higher than the recommended concentration for field applications. This resistant strain showed high levels of cross-resistance to deltamethrin (150-fold) and etofenprox (240-fold), suggesting that the development of resistance to lambda-cyhalothrin may compromise the effectiveness of other pyrethroids for the control of this species. We have shown that the resistance of the W-1K strain to lambda-cyhalothrin was almost completely suppressed by the synergist PBO, indicating that P450 enzymes play a very important role in resistance to this insecticide. However, both susceptible C and resistant W-1K flies were knocked down after topical treatment with lambda-cyhalothrin, suggesting that kdr resistance mediated by alterations of the target site is not playing a major role. Metabolic resistance mediated by P450 was further analyzed by comparing the expression of 53 genes of the families CYP4, CYP6, CYP9 and CYP12 in adults flies from the resistant W-1K and the susceptible C strains. We found that the gene CYP6A51 (GenBank accession number XM_004534804) was overexpressed (13-18-fold) in the W-1K strain. Moreover, the expression of the CYP6A51 gene was induced when adults of the W-1K and C strains were treated with lambda-cyhalothrin. However, no significant differences were obtained between susceptible C and resistant W-1K strains for the quantity of P450 and for the activity of NADPH- cytochrome c reductase measured in microsomal fractions obtained from abdomens. Moreover, we failed to correlate the metabolism of deltamethrin, analyzed in vitro by incubating this insecticide with microsomal fractions, with the resistance level against this pyrethroid observed in bioassays with W-1K. The sequencing of the 5´UTR region of the CYP6A51 gene failed in finding an alteration in the promoter region (-500 bp from translation start site) that could explain overexpression in the W-1K strain. All data obtained suggest that resistance to lambda-cyhalothrin in the W- 1K strain is mediated by P450 and that overexpression of CYP6A51 may play a major role, although further evidences are needed to establish a direct association of resistance with this gene. We have studied the inheritance, fitness cost and stability of the malathion resistance mediated by the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A). The malathion-susceptible C strain where the G328A mutation is not found (S/S genotype) was crossed with two isolines established to represent unique genotypes corresponding to the two target-site resistance mechanisms: 1) the 267Y isoline (genotype R/R) was established from a couple bearing the mutation G328A in homozygosis; and 2) the 306TY isoline (genotype RS/RS) was established from a couple being homozygous for the duplication of the Ccace2 gene. Reciprocal crosses have not been performed, since in situ hybridization on polythene chromosomes showed that the AChE locus and the duplication (most probably in tandem) are placed at the autosomal chromosome 2L. Mortality responses to malathion of resistant isolines (R/R or RS/RS) and susceptible (S/S) genotypes, F1 crosses (S/R, S/RS, and R/RS), and the back-crosses indicated that resistance to malathion is inherited as a semi-dominant trait in both cases. However, our results were not conclusive about the monogenic nature of the resistance to malathion in these isolines. Thus, we can not discard that other genes contributing to resistance, in addition to the mutation G328A (isoline 267Y) and the duplication of the Ccace2 gene (isoline 306TY), may have been selected during the selection process of 267Y and 306TY. Several biological parameters were evaluated to determine if these two malathion resistance mechanisms impose a fitness cost for resistant genotypes. Individuals with genotype R/R have a reduced fitness in terms of developmental time from egg to pupa, pupal weight and adult longevity, when compared to susceptible individuals (genotype S/S). Interestingly, the fitness cost was substantially diminished in individuals with genotype RS/RS. These differences in fitness may be related to the reduction of the catalytic efficiency of mutated AChE in individuals R/R, and the compensatory effect that the non-mutated copy of the gene has on individuals RS/RS bearing the duplication. The stability of malathion reistance associated with the mutation G328A or the duplication was analyzed by following these resistant traits in the progeny of the back-crosses S/RS x RS/RS and S/R x R/R over consecutive generations in the absence of insecticide selection pressure. Our results show that the frequency of the allele bearing the mutation G328A decreased from 67.5% at the first generation of the back-cross S/R x R/R (75% expected, assuming Mendelian segregation and that there are only two alleles: one mutated and the other non-mutated) to 12% after 10 generations. By contrast, the frequency of the duplication only declined from 75% at the first generation of the back-cross S/RS x RS/RS (75% expected, assuming Mendelian segregation and that the duplication segregates as an unique allele) to 50% in the same period, indicating that the duplication is more stable than the mutation. The presence of the mutation and the duplication was analyzed in field populations collected in six localities in 2004-2007, when malathion was still used, and compared to populations collected in the same fields in 2010, one year after the prohibition of malathion in the European Union. The average frequency of the susceptible genotype (S/S) increased from 55.9% in the period 2004-2007 to 70.8% in 2010, whereas the frequency of those genotypes carrying the mutation in homozygosis or heterozygosis (R/R and S/R) declined from 30.4 to 9.2%, those carrying the duplication in homozygosis or heterozygosis (RS/RS and S/RS) increased slightly from 12.8 to 13.3%, and those carrying both the mutation and the duplication (R/RS) also increased from 1 to 6.7%. These results are consistent with the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A and the other copy non-mutated) being more advantageous than the G328A mutation alone by maintaining resistance while restoring part of the fitness. In order to investigate the association of malathion resistance with mutations previously found in the aliesterase CcE7, we have generated isolines bearing specific mutations selected by their putative location near the upper part of the active site gorge of the enzyme. The isoline Sm2 (originating from a female heterozygous for the mutation V96L and a male homozygous for the non-mutated allele) kept high levels of resistance to malathion, even after 30 generations without selection pressure. On the contrary, the isoline 267Y (composed by individuals homozygous for the mutation L267Y) and the strain 306TY (composed by homozygous for the double mutation R306T-N307Y) showed a significant reduction in the levels of resistance. We have found also that resistance to malathion in the Sm2 isoline was partially reverted by DEF and TPP, and that Sm2 showed a significant reduction in MTB activity, as reported for other species showing malathion-specific resistance mediated by aliesterases. Besides, it was possible to associate the presence of the mutation V96L in individuals from the Sm2 isoline with both survival to a discriminating concentration of malathion (5,000 ppm) and low MTB activity. Our results point out to a possible connection betwen the mutation V96L in the aliesterase CcE7 and resistance to malathion, though we can not yet conclude that the resistance is caused by the mutation, being needed further work to understand its contribution to resistance. In conclusion, resistance to lambda-cyhalothrin has been found for the first time in field populations of C. capitata, and metabolic resistance mediated by P450 appears to be the main resistance mechanism in the resistant strain W-1K. These findings add to the previously reported case of field resistance to malathion, associated to the G328A mutation and the duplication of the Ccace2 gene (with one of the copies bearing the mutation G328A) and to metabolic resistance mediated by esterases. Our results also indicate that altered target site AChE appears to be responsible for a certain level of resistance to malathion in C. capitata, that can be estimated as about 25-40-fold for the mutation G328A and 40-60-fold for the duplication; whereas metabolic resistance mediated by esterases and associated in this study with the mutation V96L in CcE7 may confer a multiplicative effect (by a factor of 5 to10) increasing malathion resistance to 200-400-fold. Moreover, we have shown that resistant insects carrying the duplication have better fitness and exhibit a higher stability than those with the mutation G328A in the absence of insecticide pressure. This represents a scenario where genotypes with the duplication will remain in the field at low to moderate frequencies, but could be rapidly selected if malathion or other insecticides showing cross-resistance are used. These findings have important implications for resistance management programs, as the repertoire of effective insecticides for C. capitata control is becoming very limited. Besides, multiple resistance mechanisms coexisting in field populations provide the potential to develop resistance to other available insecticides for the control of this pest. Appropriate resistance management strategies based on the alternation of insecticides with different modes of action, and their combination with other control methods, must then be implemented to avoid the evolution of resistance in the field.

Testing equipment for the improvement of mechanical devices to minimize damage to fruit in commercial packing lines.

Damages -reduced in fruit packing lines is a major cause of grace reduction and quality loos in fresh marks: fruit. Fruit must be treated gently during in sir handling to improve their qualityin order to get a good price in a competitive market. The correct post-hardvest handling in fruit packing lines is a prerequisite to cut down the heavy post-harvest losses. Fruit packing lines must be evaluated, studying their design, the impacts applied to the fruits, the characteristics of the materials, etc. This study establishes the possibility of carrying out modifications and tests in a packing line during a long period of time. For this purpose, an experimental fruit packing line has been designed and located in the Agricultural Engineering Department of the Polythecnic University of Madrid with the aim of improving mechanical devices and fruit handling conditions to minimize damage to fruit. The experimental line consists of several transporting belts, one rollers transporter, one sizer, one elevator, one singularizer, and three trays to receive the calibrated fruit. The line has a length of 6.15 m and a width cf 1.9 m. Movement of the different components is regulated by electric motors with variable velocity electronically controlled. The height of the transfer points is variable and can be easily modified. The experimental line has been calibrated using two instrumented spheres IS 100 (8.8 cm Ø and6.2cm Ø). Average acceleration values obtained in all the transfers of the experimental line lay under 80 g's, although there is big variation for some of them being some values above 100 g's.

Characterization of a 90° Transfer Point in a Fruit Packing Line.

Characteristics of the impacts suffered by the fruit on a transfer point of an experimental fruit packing line were analysed. The transfer is made up by two transporting belts at different heights forming an angle of 90°. These transfer points are very common in fruit packing lines, in which fruits receive two impacts: the first onto the belt base and the second into the lateral plate. Different tests were earned out to study the effect of transfer height, velocity, belt structure and padding on tire acceleration values recorded by an instrumental sphere (IS 100). Results showed that transfer height and belt structure affect mainly impact values on the belt base, and padding affects mainly impact values registered in lateral impact. The effect of belt velocity in both impacts is less important when compared to the rest of the variables. Additionally, two powered transfer decelerators were tested at the same point with the aim of decreasing impacts suffered by the fruit. Comparing impacts registered using these decelerators to those analysed in the first part of the study without decelerators a high reduction of the impact values was observed.

A procedure for testing padding materials in fruit packing lines.

Padding materials are commonly used in fruit packing lines with the objective of diminishing impact damage in postharvest handling. Two sensors, instrumented sphere IS 100 and impact tester, have been compared to analyze the performance of six different padding materials used in Spanish fruit packing lines. Padding materials tested have been classified according to their capability to decrease impact intensities inflicted to fruit in packing lines. A procedure to test padding materials has been developed for "Golden" apples. Its basis is a logistic regression to predict bruise probability in fruit. The model combines two kinds of parameters: padding material parameters measured with IS, and fruit properties.

Models for internal quality sorting of fruit, based on time-domain laser reflectance spectroscopy (TDRS).

Non-destructive measurement of fruit quality has been an important objective through recent years (Abbott, 1999). Near infrared spectroscopy (NIR) is applicable to the cuantification of chemicals in foods and NIK "laser spectroscopy" can be used to estimate the firmness of fruits. However, die main limitation of current optical techniques that measure light transmission is that they do not account for the coupling between absorption and scattering inside the tissue, when quantifying the intensity o f reemitted light. The solution o f this l i m i t a t i o n was the goal o f the present work.

Determination of firmness in a fruit packing line using a non destructive impact sensor.

The increasing of quality fruit demanded by the consumers is originating an advance in the development and application of sensors capable of measuring parameters of quality (sugar, acids, firmness, etc) on a non destructive way. Some of these sensors are already operative for their use in laboratory and even in lines. The Physical Properties laboratory of the Polytechnic University of Madrid, is developing different sensors for their implementation in lines. One of them is a non destructive impact sensor to measure fruit firmness.

Application of NMR techniques for the evaluation of fruit internal quality and physical properties of food

Los alimentos son sistemas complejos, formados por diversas estructuras a diferentes escalas: macroscópica y microscópica. Muchas propiedades de los alimentos, que son importantes para su procesamiento, calidad y tratamiento postcosecha, están relacionados con su microestructura. La presente tesis doctoral propone una metodología completa para la determinación de la estructura de alimentos desde un punto de vista multi-escala, basándose en métodos de Resonancia Magnética Nuclear (NMR). Las técnicas de NMR son no invasivas y no destructivas y permiten el estudio tanto de macro- como de microestructura. Se han utilizado distintos procedimientos de NMR dependiendo del nivel que se desea estudiar. Para el nivel macroestructural, la Imagen de Resonancia Magnética (MRI) ha resultado ser muy útil para la caracterización de alimentos. Para el estudio microestructural, la MRI requiere altos tiempos de adquisición, lo que hace muy difícil la transferencia de esta técnica a aplicaciones en industria. Por tanto, la optimización de procedimientos de NMR basados en secuencias relaxometría 2D T1/T2 ha resultado ser una estrategia primordial en esta tesis. Estos protocolos de NMR se han implementado satisfactoriamente por primera vez en alto campo magnético. Se ha caracterizado la microestructura de productos alimentarios enteros por primera vez utilizando este tipo de protocolos. Como muestras, se han utilizado dos tipos de productos: modelos de alimentos y alimentos reales (manzanas). Además, como primer paso para su posterior implementación en la industria agroalimentaria, se ha mejorado una línea transportadora, especialmente diseñada para trabajar bajo condiciones de NMR en trabajos anteriores del grupo LPF-TAGRALIA. Se han estudiado y seleccionado las secuencias más rápidas y óptimas para la detección de dos tipos de desórdenes internos en manzanas: vitrescencia y roturas internas. La corrección de las imágenes en movimiento se realiza en tiempo real. Asimismo, se han utilizado protocolos de visión artificial para la clasificación automática de manzanas potencialmente afectadas por vitrescencia. El presente documento está dividido en diferentes capítulos: el Capítulo 2 explica los antecedentes de la presente tesis y el marco del proyecto en el que se ha desarrollado. El Capítulo 3 recoge el estado del arte. El Capítulo 4 establece los objetivos de esta tesis doctoral. Los resultados se dividen en cinco sub-secciones (dentro del Capítulo 5) que corresponden con los trabajos publicados bien en revistas revisadas por pares, bien en congresos internacionales o bien como capítulos de libros revisados por pares. La Sección 5.1. es un estudio del desarrollo de la vitrescencia en manzanas mediante MRI y lo relaciona con la posición de la fruta dentro de la copa del árbol. La Sección 5.2 presenta un trabajo sobre macro- y microestructura en modelos de alimentos. La Sección 5.3 es un artículo en revisión en una revista revisada por pares, en el que se hace un estudio microestrcutural no destructivo mediante relaxometría 2D T1/T2. la Sección 5.4, hace una comparación entre manzanas afectadas por vitrescencia mediante dos técnicas: tomografía de rayos X e MRI, en manzana. Por último, en la Sección 5.5 se muestra un trabajo en el que se hace un estudio de secuencias de MRI en línea para la evaluación de calidad interna en manzanas. Los siguientes capítulos ofrecen una discusión y conclusiones (Capítulo 6 y 7 respectivamente) de todos los capítulos de esta tesis doctoral. Finalmente, se han añadido tres apéndices: el primero con una introducción de los principios básicos de resonancia magnética nuclear (NMR) y en los otros dos, se presentan sendos estudios sobre el efecto de las fibras en la rehidratación de cereales de desayuno extrusionados, mediante diversas técnicas. Ambos trabajos se presentaron en un congreso internacional. Los resultados más relevantes de la presente tesis doctoral, se pueden dividir en tres grandes bloques: resultados sobre macroestructura, resultados sobre microestructura y resultados sobre MRI en línea. Resultados sobre macroestructura: - La imagen de resonancia magnética (MRI) se aplicó satisfactoriamente para la caracterización de macroestructura. En particular, la reconstrucción 3D de imágenes de resonancia magnética permitió identificar y caracterizar dos tipos distintos de vitrescencia en manzanas: central y radial, que se caracterizan por el porcentaje de daño y la conectividad (número de Euler). - La MRI proveía un mejor contraste para manzanas afectadas por vitrescencia que las imágenes de tomografía de rayos X (X-Ray CT), como se pudo verificar en muestras idénticas de manzana. Además, el tiempo de adquisición de la tomografía de rayos X fue alrededor de 12 veces mayor (25 minutos) que la adquisición de las imágenes de resonancia magnética (2 minutos 2 segundos). Resultados sobre microestructura: - Para el estudio de microestructura (nivel subcelular) se utilizaron con éxito secuencias de relaxometría 2D T1/T2. Estas secuencias se usaron por primera vez en alto campo y sobre piezas de alimento completo, convirtiéndose en una forma no destructiva de llevar a cabo estudios de microestructura. - El uso de MRI junto con relaxometría 2D T1/T2 permite realizar estudios multiescala en alimentos de forma no destructiva. Resultados sobre MRI en línea: - El uso de imagen de resonancia magnética en línea fue factible para la identificación de dos tipos de desórdenes internos en manzanas: vitrescencia y podredumbre interna. Las secuencias de imagen tipo FLASH resultaron adecuadas para la identificación en línea de vitrescencia en manzanas. Se realizó sin selección de corte, debido a que la vitrescencia puede desarrollarse en cualquier punto del volumen de la manzana. Se consiguió reducir el tiempo de adquisición, de modo que se llegaron a adquirir 1.3 frutos por segundos (758 ms por fruto). Las secuencias de imagen tipo UFLARE fueron adecuadas para la detección en línea de la podredumbre interna en manzanas. En este caso, se utilizó selección de corte, ya que se trata de un desorden que se suele localizar en la parte central del volumen de la manzana. Se consiguió reducir el tiempo de adquisicón hasta 0.67 frutos por segundo (1475 ms por fruto). En ambos casos (FLASH y UFLARE) fueron necesarios algoritmos para la corrección del movimiento de las imágenes en tiempo real. ABSTRACT Food is a complex system formed by several structures at different scales: macroscopic and microscopic. Many properties of foods that are relevant to process engineering or quality and postharvest treatments are related to their microstructure. This Ph.D Thesis proposes a complete methodology for food structure determination, in a multiscale way, based on the Nuclear Magnetic Resonance (NMR) phenomenon since NMR techniques are non-invasive and non-destructive, and allow both, macro- and micro-structure study. Different NMR procedures are used depending on the structure level under study. For the macrostructure level, Magnetic Resonance Imaging (MRI) revealed its usefulness for food characterization. For microstructure insight, MRI required high acquisition times, which is a hindrance for transference to industry applications. Therefore, optimization of NMR procedures based on T1/T2 relaxometry sequences was a key strategy in this Thesis. These NMR relaxometry protocols, are successfully implemented in high magnetic field. Microstructure of entire food products have been characterized for the first time using these protocols. Two different types of food products have been studied: food models and actual food (apples). Furthermore, as a first step for the food industry implementation, a grading line system, specially designed for working under NMR conditions in previous works of the LPF-TAGRALIA group, is improved. The study and selection of the most suitable rapid sequence to detect two different types of disorders in apples (watercore and internal breakdown) is performed and the real time image motion correction is applied. In addition, artificial vision protocols for the automatic classification of apples potentially affected by watercore are applied. This document is divided into seven different chapters: Chapter 2 explains the thesis background and the framework of the project in which it has been worked. Chapter 3 comprises the state of the art. Chapter 4 establishes de objectives of this Ph.D thesis. The results are divided into five different sections (in Chapter 5) that correspond to published peered reviewed works. Section 5.1 assesses the watercore development in apples with MRI and studies the effect of fruit location in the canopy. Section 5.2 is an MRI and 2D relaxometry study for macro- and microstructure assessment in food models. Section 5.3 is a non-destructive microstructural study using 2D T1/T2 relaxometry on watercore affected apples. Section 5.4 makes a comparison of X-ray CT and MRI on watercore disorder of different apple cultivars. Section 5.5, that is a study of online MRI sequences for the evaluation of apple internal quality. The subsequent chapters offer a general discussion and conclusions (Chapter 6 and Chapter 7 respectively) of all the works performed in the frame of this Ph.D thesis (two peer reviewed journals, one book chapter and one international congress).Finally, three appendices are included in which an introduction to NMR principles is offered and two published proceedings regarding the effect of fiber on the rehydration of extruded breakfast cereal are displayed. The most relevant results can be summarized into three sections: results on macrostructure, results on microstructure and results on on-line MRI. Results on macrostructure: - MRI was successfully used for macrostructure characterization. Indeed, 3D reconstruction of MRI in apples allows to identify two different types of watercore (radial and block), which are characterized by the percentage of damage and the connectivity (Euler number). - MRI provides better contrast for watercore than X-Ray CT as verified on identical samples. Furthermore, X-Ray CT images acquisition time was around 12 times higher (25 minutes) than MRI acquisition time (2 minutes 2 seconds). Results on microstructure: - 2D T1/T2 relaxometry were successfully applied for microstructure (subcellular level) characterization. 2D T1/T2 relaxometry sequences have been applied for the first time on high field for entire food pieces, being a non-destructive way to achieve microstructure study. - The use of MRI together with 2D T1/T2 relaxometry sequences allows a non-destructive multiscale study of food. Results on on-line MRI: - The use of on-line MRI was successful for the identification of two different internal disorders in apples: watercore and internal breakdown. FLASH imaging was a suitable technique for the on-line detection of watercore disorder in apples, with no slice selection, since watercore is a physiological disorder that may be developed anywhere in the apple volume. 1.3 fruits were imaged per second (768 ms per fruit). UFLARE imaging is a suitable sequence for the on-line detection of internal breakdown disorder in apples. Slice selection was used, as internal breakdown is usually located in the central slice of the apple volume. 0.67 fruits were imaged per second (1475 ms per fruit). In both cases (FLASH and UFLARE) motion correction was performed in real time, during the acquisition of the images.

Mapping and Introgression of QTL Involved in Fruit Shape Transgressive Segregation into 'Piel de Sapo' Melon (Cucumis melo L.)

A mapping F2 population from the cross ‘Piel de Sapo’ × PI124112 was selectively genotyped to study the genetic control of morphological fruit traits by QTL (Quantitative Trait Loci) analysis. Ten QTL were identified, five for FL (Fruit Length), two for FD (Fruit Diameter) and three for FS (Fruit Shape). At least one robust QTL per character was found, flqs8.1 (LOD = 16.85, R2 = 34%), fdqs12.1 (LOD = 3.47, R2 = 11%) and fsqs8.1 (LOD = 14.85, R2 = 41%). flqs2.1 and fsqs2.1 cosegregate with gene a (andromonoecious), responsible for flower sex determination and with pleiotropic effects on FS. They display a positive additive effect (a) value, so the PI124112 allele causes an increase in FL and FS, producing more elongated fruits. Conversely, the negative a value for flqs8.1 and fsqs8.1 indicates a decrease in FL and FS, what results in rounder fruits, even if PI124112 produces very elongated melons. This is explained by a significant epistatic interaction between fsqs2.1 and fsqs8.1, where the effects of the alleles at locus a are attenuated by the additive PI124112 allele at fsqs8.1. Roundest fruits are produced by homozygous for PI124112 at fsqs8.1 that do not carry any dominant A allele at locus a (PiPiaa). A significant interaction between fsqs8.1 and fsqs12.1 was also detected, with the alleles at fsqs12.1 producing more elongated fruits. fsqs8.1 seems to be allelic to QTL discovered in other populations where the exotic alleles produce elongated fruits. This model has been validated in assays with backcross lines along 3 years and ultimately obtaining a fsqs8.1-NIL (Near Isogenic Line) in ‘Piel de Sapo’ background which yields round melons.

Snelheid extra selected sinaazappelen [ [Material gráfico]: eet fruit : speciaal gepakt door : N.V. "Solbandera", Alcira, Spanje.

Tit. en la etiqueta:"Geen alcohol / bij snelverkeer / Snelheid / extra selected sinaasappelen / eet fruit / speciaal gepakt door / N.V. "Solabandera", Alcira, Spanje"