Modelo de recolección de residuos sólidos botellas plásticas y latas utilizando como aliado el sistema de transporte masivo en Bogotá

En las grandes ciudades, la disposición de residuos se ha convertido en un problema ambiental de magnitud mundial con impacto negativo por el manejo inadecuado de los residuos sólidos diarios. El propósito es utilizar el sistema de transporte publico de Bogotá (Transmilenio) como punto de recolección de botellas plásticas y latas, para crear un proyecto de responsabilidad ambiental el cual tendrá resultados positivos a nivel cultural, social, y a largo plazo, financieramente. A través del estudio de diferentes propuestas tanto locales como internacionales, fueron identificados los principales factores de éxito de estos proyectos los cuales se incluyeron para adecuar la presente propuesta para la ciudad de Bogotá teniendo en cuenta sus actuales condiciones. Después de identificar las características requeridas para Bogotá, se realizó un estudio demográfico para poder saber cuántos ciudadanos estarían dispuestos a participar. Como resultado, muchos pasajeros de Transmilenio esperan una retribución económica en el costo del pasaje del sistema. La prueba piloto se diseñó de acuerdo con la cantidad de envases recolectados, incluyendo el tipo de vehículos, como también la cantidad de personas y maquinas necesarias para el éxito del proyecto. Con la propuesta del proyecto completa, se realiza una evaluación financiera y económica para identificar los costos y gastos. La conclusión final de esta propuesta es que el modelo propuesto puede ser aplicado en Bogotá dadas sus características. Los beneficios sociales y ambientales también se destacan, como también el cambio cultural por parte de los ciudadanos hacia las prácticas ecológicas.

Avaluació del procés de desintegració de papers recuperats

La desintegració és una etapa important en la recuperació de paper vell, ja que té importants conseqüències en consum d'energia i en el comportament de les etapes posteriors. Per això els objectius es centren en analitzar la desintegració des del punt de vista del temps de desintegració, els aspectes energètics, modelització de la màquina de desintegració utilitzada i anàlisi dels factors de cisallament calculats com a mesura global de les forces implicades en la desintegració. Els autors que hi han treballat donen diferents explicacions a aquestes forces. Fins avui només s'ha pogut avaluar qualitativament la influència que tenen cada un dels mecanismes en el temps necessari per a desintegrar i en el consum energètic. Les característiques reològiques de les suspensions papereres, i el seu comportament no newtonià tenen una clara influència en el consum energètic i les forces de desfibrat en el desintegrador. Els experiments de desintegració s'han realitzat en un púlper convencional, amb tres tipus de paper recuperat: paper estucat d'alta qualitat imprès offset (PQ), paper revista estucat imprès en color (PR), paper blanc imprès en impresora làsser (PF). Anàlisi del temps de desintegració Per cada un del papers estudiats (PQ, PR i PF), les fraccions màssiques des de 0.06 fins a la màxima que estat possible per cada paper (de 0.14 a 0.18), i a dues velocitats d'agitació diferents, s'ha determinat el temps de desintegració (tD) fins a aconseguir un índex de Sommerville de 0.01%. S'obté que en augmentar la fracció màssica disminueix potencialment el temps de desintegració. S'ha estudiat la velocitat de desintegració, la producció teòrica del púlper en cada cas, i la seva relació amb les forces d'impacte i de fregament que produeixen la desintegració. Aspectes energètics El consum específic d'energia (SEC), definit com l'energia consumida per a desintegrar 1 kg de paper recuperat, disminueix molt en augmentar Xm, ja que a més de disminuir l'energia consumida en cada desintegració, el contingut en paper és més elevat. Pel disseny de desintegradors, cal tenir en compte que en augmentar Xm i en augmentar la velocitat, sempre augmenta la potència consumida. Però així com els beneficis de treballar a Xm alt són de 10 vegades en termes de SEC i de producció, l'augment de potència és només de l'ordre de 2 vegades la necessària respecte de la Xm baixa. Viscositat aparent i energia de fluidització S'estudia la relació entre el temps de desintegració, les forces de fregament i els valors de viscositat aparent de la bibliografia. Per cada paper i velocitat s'ha observat que el consum específic d'energia disminueix en funció de la viscositat aparent. Reologia del púlper Utilitzant el mètode de Metzner i Otto (1957) per determinar la viscositat aparent mitjana de les suspensions papereres, modificat per Roustan, s'ha caracteritzat el pulper mitjançant el model: Np= K· Rex·Fry S'han utilitzat dissolucions de glicerina com a fluid newtonià per a calcular les constants d'ajust, i a partir d'aquí, aïllar la viscositat aparent en funció de la potència neta i els paràmetres d'agitació. La viscositat aparent, d'acord amb Fabry (1999) es substitueix pel concepte de factor de cisallament. Factor de cisallament Calculat el factor de cisallament per a cada paperot i condicions d'agitació, s'ha relacionat amb Xm, SEC, tD, consum de potència, potència instal·lada i fracció cel·lulòsica. El factor de cisallament és un paràmetre útil per a quantificar les forces globals implicades en la desintegració.

Composition and cure temperature: The influence on properties of final flexible PU cold cure foam parts

Foams are cellular structures, produced by gas bubbles formed during the polyurethane polymerization mixture. Flexible PU foams meet the following two criteria: have a limited resistance to an applied load, being both permeable to air and reversibly deformable. There are two main types of flexible foams, hot and cold cure foams differing in composition and processing temperatures. The hot cure foams are widely applied and represent the main composition of actual foams, while cold cure foams present several processing and property advantages, e.g, faster demoulding time, better humid aging properties and more versatility, as hardness variation with index changes are greater than with hot cure foams. The processing of cold cure foams also is attractive due to the low energy consumption (mould temperature from 30 degrees to 65 degrees C) comparatively to hot cure foams (mould temperature from 30 degrees to 250 degrees C). Another advantage is the high variety of soft materials for low temperature processing moulds. Cold cure foams are diphenylmethane diisocyanate (MDI) based while hot cure foams are toluene diisocyanate (TDI) based. This study is concerned with Viscoelastic flexible foams MDI based for medical applications. Differential Scanning Calorimetry (DSC) was used to characterize the cure kinetics and Dynamical Mechanical Analisys to collect mechanical data. The data obtained from these two experimental procedures were analyzed and associated to establish processing/properties/operation conditions relationships. These maps for the selection of optimized processing/properties/operation conditions are important to achieve better final part properties at lower costs and lead times.

A sensor based intelligent building assessment model

While building provides shelter for human being, the previous models for assessing the intelligence of a building seldom consider the responses of occupants. In addition, the assessment is usually conducted by an authority organization on a yearly basis, thus can seldom provide timely assistance for facility manager to improve his daily facility maintenance performance. By the extending the law of entropy into the area of intelligent building, this paper demonstrate that both energy consumption and the response of occupants are important when partially assessing the intelligence of a building. This study then develops a sensor based real time building intelligence (BI) assessment model. An experimental case study demonstrates how the model can be implemented. The developed model can address the two demerits of the previous BI assessment model.

Performance of phase change material boards under natural convection

The high thermal storage capacity of phase change material (PCM) can reduce energy consumption in buildings through energy storage and release when combined with renewable energy sources, night cooling, etc. PCM boards can be used to absorb heat gains during daytime and release heat at night. In this paper, the thermal performance of an environmental chamber fitted with phase change material boards has been investigated. During a full-cycle experiment, i.e. charging–releasing cycle, the PCM boards on a wall can reduce the interior wall surface temperature during the charging process, whereas the PCM wall surface temperature is higher than that of the other walls during the heat releasing process. It is found that the heat flux density of the PCM wall in the melting zone is almost twice as large as that of ordinary wall. Also, the heat-insulation performance of a PCM wall is better than that of an ordinary wall during the charging process, while during the heat discharging process, the PCM wall releases more heat energy. The convective heat transfer coefficient of PCM wall surface calculated using equations for a normal wall material produces an underestimation of this coefficient. The high convective heat transfer coefficient for a PCM wall is due to the increased energy exchange between the wall and indoor air.

Impact of transmission errors in enhanced relay-enabled distributed coordination function

This paper analyzes the performance of Enhanced relay-enabled Distributed Coordination Function (ErDCF) for wireless ad hoc networks under transmission errors. The idea of ErDCF is to use high data rate nodes to work as relays for the low data rate nodes. ErDCF achieves higher throughput and reduces energy consumption compared to IEEE 802.11 Distributed Coordination Function (DCF) in an ideal channel environment. However, there is a possibility that this expected gain may decrease in the presence of transmission errors. In this work, we modify the saturation throughput model of ErDCF to accurately reflect the impact of transmission errors under different rate combinations. It turns out that the throughput gain of ErDCF can still be maintained under reasonable link quality and distance.

Performance evaluation of enhanced relay-enabled distributed coordination function

In this paper we evaluate the performance of our earlier proposed enhanced relay-enabled distributed coordination function (ErDCF) for wireless ad hoc networks. The idea of ErDCF is to use high data rate nodes to work as relays for the low data rate nodes. ErDCF achieves higher throughput and reduced energy consumption compared to IEEE 802.11 distributed coordination function (DCF). This is a result of. 1) using relay which helps to increase the throughput and lower overall blocking time of nodes due to faster dual-hop transmission, 2) using dynamic preamble (i.e. using short preamble for the relay transmission) which further increases the throughput and lower overall blocking time and also by 3) reducing unnecessary overhearing (by other nodes not involved in transmission). We evaluate the throughput and energy performance of the ErDCF with different rate combinations. ErDCF (11,11) (ie. R1=R2=11 Mbps) yields a throughput improvement of 92.9% (at the packet length of 1000 bytes) and an energy saving of 72.2% at 50 nodes.

An enhanced relay-enabled medium access control protocol for wireless ad hoc networks

In this paper we propose an enhanced relay-enabled distributed coordination function (rDCF) for wireless ad hoc networks. The idea of rDCF is to use high data rate nodes to work as relays for the low data rate nodes. The relay helps to increase the throughput and lower overall blocking time of nodes due to faster dual-hop transmission. rDCF achieves higher throughput over IEEE 802.11 distributed coordination function (DCF). The protocol is further enhanced for higher throughput and reduced energy. These enhancements result from the use of a dynamic preamble (i.e. using short preamble for the relay transmission) and also by reducing unnecessary overhearing (by other nodes not involved in transmission). We have modeled the energy consumption of rDCF, showing that rDCF provides an energy efficiency of 21.7% at 50 nodes over 802.11 DCF. Compared with the existing rDCF, the enhanced rDCF (ErDCF) scheme proposed in this paper yields a throughput improvement of 16.54% (at the packet length of 1000 bytes) and an energy saving of 53% at 50 nodes.

Analysis of enhanced relay-enabled distributed coordination function under transmission errors

This paper analyzes the performance of enhanced relay-enabled distributed coordination function (ErDCF) for wireless ad hoc networks under transmission errors. The idea of ErDCF is to use high data rate nodes to work as relays for the low data rate nodes. ErDCF achieves higher throughput and reduces energy consumption compared to IEEE 802.11 distributed coordination function (DCF) in an ideal channel environment. However, there is a possibility that this expected gain may decrease in the presence of transmission errors. In this work, we modify the saturation throughput model of ErDCF to accurately reflect the impact of transmission errors under different rate combinations. It turns out that the throughput gain of ErDCF can still be maintained under reasonable link quality and distance.

Design, implementation and testing of an intelligent knowledge-based system for the supervisory control of a hot rolling mill

This paper describes the design, implementation and testing of an intelligent knowledge-based supervisory control (IKBSC) system for a hot rolling mill process. A novel architecture is used to integrate an expert system with an existing supervisory control system and a new optimization methodology for scheduling the soaking pits in which the material is heated prior to rolling. The resulting IKBSC system was applied to an aluminium hot rolling mill process to improve the shape quality of low-gauge plate and to optimise the use of the soaking pits to reduce energy consumption. The results from the trials demonstrate the advantages to be gained from the IKBSC system that integrates knowledge contained within data, plant and human resources with existing model-based systems. (c) 2005 Elsevier Ltd. All rights reserved.

Part load operation coefficient of air-conditioning system of public building

IPLV overall coefficient, presented by Air-Conditioning and Refrigeration Institute (ARI) of America, shows running/operation status of air-conditioning system host only. For overall operation coefficient, logical solution has not been developed, to reflect the whole air-conditioning system under part load. In this research undertaking, the running time proportions of air-conditioning systems under part load have been obtained through analysis on energy consumption data during practical operation in all public buildings in Chongqing. This was achieved by using analysis methods, based on the statistical energy consumption data distribution of public buildings month-by-month. Comparing with the weight number of IPLV, part load operation coefficient of air-conditioning system, based on this research, does not only show the status of system refrigerating host, but also reflects and calculate energy efficiency of the whole air-conditioning system. The coefficient results from the processing and analyzing of practical running data, shows the practical running status of area and building type (actual and objective) – not clear. The method is different from model analysis which gets IPLV weight number, in the sense that this method of coefficient results in both four equal proportions and also part load operation coefficient of air-conditioning system under any load rate as necessary.

A generic model of Exergy Assessment of the Environmental Impact for the Building Lifecycle

A generic model of Exergy Assessment is proposed for the Environmental Impact of the Building Lifecycle, with a special focus on the natural environment. Three environmental impacts: energy consumption, resource consumption and pollutant discharge have been analyzed with reference to energy-embodied exergy, resource chemical exergy and abatement exergy, respectively. The generic model of Exergy Assessment of the Environmental Impact of the Building Lifecycle thus formulated contains two sub-models, one from the aspect of building energy utilization and the other from building materials use. Combined with theories by ecologists such as Odum, the paper evaluates a building's environmental sustainability through its exergy footprint and environmental impacts. A case study from Chongqing, China illustrates the application of this method. From the case study, it was found that energy consumption constitutes 70–80% of the total environmental impact during a 50-year building lifecycle, in which the operation phase accounts for 80% of the total environmental impact, the building material production phase 15% and 5% for the other phases.

Towards a holistic modelling framework for embodied carbon and waste in the building lifecycle

As the building industry proceeds in the direction of low impact buildings, research attention is being drawn towards the reduction of carbon dioxide emission and waste. Starting from design and construction to operation and demolition, various building materials are used throughout the whole building lifecycle involving significant energy consumption and waste generation. Building Information Modelling (BIM) is emerging as a tool that can support holistic design-decision making for reducing embodied carbon and waste production in the building lifecycle. This study aims to establish a framework for assessing embodied carbon and waste underpinned by BIM technology. On the basis of current research review, the framework is considered to include functional modules for embodied carbon computation. There are a module for waste estimation, a knowledge-base of construction and demolition methods, a repository of building components information, and an inventory of construction materials’ energy and carbon. Through both static 3D model visualisation and dynamic modelling supported by the framework, embodied energy (carbon), waste and associated costs can be analysed in the boundary of cradle-to-gate, construction, operation, and demolition. The proposed holistic modelling framework provides a possibility to analyse embodied carbon and waste from different building lifecycle perspectives including associated costs. It brings together existing segmented embodied carbon and waste estimation into a unified model, so that interactions between various parameters through the different building lifecycle phases can be better understood. Thus, it can improve design-decision support for optimal low impact building development. The applicability of this framework is anticipated being developed and tested on industrial projects in the near future.

Delay analysis of enhanced relay-enabled distributed coordination function

This paper analyzes the delay performance of Enhanced relay-enabled Distributed Coordination Function (ErDCF) for wireless ad hoc networks under ideal condition and in the presence of transmission errors. Relays are nodes capable of supporting high data rates for other low data rate nodes. In ideal channel ErDCF achieves higher throughput and reduced energy consumption compared to IEEE 802.11 Distributed Coordination Function (DCF). This gain is still maintained in the presence of errors. It is also expected of relays to reduce the delay. However, the impact on the delay behavior of ErDCF under transmission errors is not known. In this work, we have presented the impact of transmission errors on delay. It turns out that under transmission errors of sufficient magnitude to increase dropped packets, packet delay is reduced. This is due to increase in the probability of failure. As a result the packet drop time increases, thus reflecting the throughput degradation.

Intelligent agents enabling negotiated control of pervasive environments

One of the important goals of the intelligent buildings especially in commercial applications is not only to minimize the energy consumption but also to enhance the occupant’s comfort. However, most of current development in the intelligent buildings focuses on an implementation of the automatic building control systems that can support energy efficiency approach. The consideration of occupants’ preferences is not adequate. To improve occupant’s wellbeing and energy efficiency in intelligent environments, we develop four types of agent combined together to form a multi-agent system to control the intelligent buildings. Users’ preferential conflicts are discussed. Furthermore, a negotiation mechanism for conflict resolution, has been proposed in order to reach an agreement, and has been represented in syntax directed translation schemes for future implementation and testing. Keywords: conflict resolution, intelligent buildings, multi-agent systems (MAS), negotiation strategy, syntax directed translation schemes (SDTS).