The effects of low-intensity ultrasound in bioabsorbable self-reinforced poly-L-lactide -fixed cancellous bone fracture

The purpose of the present study was to investigate the effects of low-intensity ultrasound on bioabsorbable self-reinforced poly-L-lactide (SR-PLLA) screws and on fracture healing after SR-PLLA device fixation in experimental and clinical cancellous bone fracture. In the first experimental study, the assessment of the mechanical strengths of the SR-PLLA screws was performed after 12 weeks of daily 20-minute ultrasound exposure in vitro. In the second experimental study, 32 male Wistar rats with an experimental distal femur osteotomy fixed with an SR-PLLA rod were exposed for daily low-intensity ultrasound treatment for 21 days. The effects on the healing bone were assessed. The clinical studies consist of three prospective, randomized, and placebo-controlled series of dislocated lateral malleolar fractures fixed with one SR-PLLA screw. The total number of the patients in these series was 52. Half of the patients were provided randomly with a sham ultrasound device. The patients underwent ultrasound therapy 20 minutes daily for six weeks. Radiological bone healing was assessed both by radiographs at two, six, nine, and 12 weeks and by multidetector computed tomography (MDCT) scans at two weeks, nine weeks, and 18 months. Bone mineral density was assessed by dual-energy X-ray absorptiometry (DXA). The clinical outcome was assessed by both Olerud-Molander scoring and clinical examination of the ankle. Low-intensity ultrasound had no effects on the mechanical properties and degradation behaviour of the SR-PLLA screws in vitro. There were no obvious signs of low-intensity ultrasound-induced enhancement in the bone healing in SR-PLLA-rod-fixed metaphyseal distal femur osteotomy in rats. The biocompatibility of low-intensity ultrasound treatment and SR-PLLA was found to be good. In the clinical series low-intensity ultrasound was observed to have no obvious effects on the bone mineral density of the fractured lateral malleolus. There were no obvious differences in the radiological bone healing times of the SR-PLLA-screw-fixed lateral malleolar fractures after low-intensity ultrasound treatment. Low-intensity ultrasound did not have any effects on radiological bone morphology, bone mineral density or clinical outcome 18 months after the injury. There were no obvious findings in the present study to support the hypothesis that low-intensity pulsed ultrasound enhances bone healing in SR-PLLA-rod-fixed experimental metaphyseal distal femur osteotomy in rats or in clinical SR-PLLA-screw-fixed lateral malleolar fractures. It is important to limit the conclusions of the present set of studies only to lateral malleolar fractures fixed with an SR-PLLA screw.

Suicidal behaviour in bipolar disorder

The Jorvi Bipolar Study (JoBS) is a collaborative ongoing bipolar research project between the Department of Mental Health and Alcohol Research of the National Public Health Institute, Helsinki, and the Department of Psychiatry, Jorvi Hospital, Helsinki University Central Hospital (HUCH), Espoo, Finland. The JoBS is a prospective, naturalistic cohort study of secondary level care psychiatric out-and inpatients with a new episode of Diagnostic and Statistical Manual of Mental Disorders, 4th edition (DSM-IV) bipolar disorder (BD). Altogether, 1630 patients (aged 18-59) years were screened using the Mood Disorder Questionnaire (MDQ) for a possible new episode of DSM-IV BD. 490 patients were interviewed with semi-structured interview [the Structured Clinical Interview for DSM-IV Disorders, research version with Psychotic Screen (SCID-I/P)]. 191 patients with new episode of DSM-IV BD were included in the bipolar cohort study. Psychiatric comorbidity was evaluated using semi-structured interviews. At 6- and 18-month follow-up, the interviews were repeated and life-chart methodology was used to integrate all available information about nature and duration of all different phases. Suicidal behaviour was examined both at intake and follow-up by psychometric scale [Scale for Suicidal Ideation (SSI)], interviewer s questions and medical and psychiatric records. The aim of this thesis was to evaluate prevalence of suicidal behaviour and incidence of suicide attempts, and examine the wide range of risk factors for attempted suicide both, at intake and follow-up, in representative secondary-level sample of psychiatric in- and outpatients with BD. In this study suicidal behaviour was common among psychiatric patients with BD. During the episode when patients were included into cohort study (index episode), 20% of the patients had attempted suicide and 61% had suicidal ideation. Severity of depressive episode and hopelessness were independent risk factors for suicidal ideation, whereas hopelessness, comorbid personality disorder and previous suicide attempt predicted suicide attempts during the index episode. There were no differences in prevalence of suicidal behaviour between bipolar I and II disorder; the risk factors were overlapping but not identical. During the index episode, suicide attempts took place during depressive, mixed and depressive mixed phases. Furthermore, there were marked differences regarding level of suicidal ideation during different phases, with the highest levels during the mixed phases of the illness. Hopelessness was independently associated with suicidal behaviour during the depressive phase. A subjective rating of severity of depression (Beck Depression Inventory) and younger age predicted suicide attempts during mixed phases. During the 18-month follow-up 20% of patients attempted suicide. Previous suicide attempts, hopelessness, depressive phase at index episode and younger age at intake were independent risk factors for suicide attempts during follow-up. Taken altogether, 55% patients attempted suicide before index episode, during index episode or during follow-up. The incidence of suicide attempts was 37-fold during combined mixed and depressive mixed states and 18-fold during major depressive phase as compared with other phases. Prior suicide attempt and time spent in combined mixed phases - mixed and depressive mixed - and depressive phases independently predicted the suicide attempt during follow-up. More than half of the patients have attempted suicide during their lifetime, a finding which highlights the public health importance of suicidal behaviour in bipolar disorder. Clinically, it is crucial to recognize BD and manage the mixed and depressive phases of bipolar patients fast and effectively, as time spent in depressive and mixed phases involves a remarkably high risk of suicide attempts.

Augmenting process elicitation with visual priming: An empirical exploration of user behaviour and modelling outcomes

Business process models have become an effective way of examining business practices to identify areas for improvement. While common information gathering approaches are generally efficacious, they can be quite time consuming and have the risk of developing inaccuracies when information is forgotten or incorrectly interpreted by analysts. In this study, the potential of a role-playing approach to process elicitation and specification has been examined. This method allows stakeholders to enter a virtual world and role-play actions similarly to how they would in reality. As actions are completed, a model is automatically developed, removing the need for stakeholders to learn and understand a modelling grammar. An empirical investigation comparing both the modelling outputs and participant behaviour of this virtual world role-play elicitor with an S-BPM process modelling tool found that while the modelling approaches of the two groups varied greatly, the virtual world elicitor may not only improve both the number of individual process task steps remembered and the correctness of task ordering, but also provide a reduction in the time required for stakeholders to model a process view.

Modelling, calibrating, and validating car following and lane changing behaviour

Car following (CF) and lane changing (LC) are two primary driving tasks observed in traffic flow, and are thus vital components of traffic flow theories, traffic operation and control. Over the past decades a large number of CF models have been developed in an attempt to describe CF behaviour under a wide range of traffic conditions. Although CF has been widely studied for many years, LC did not receive much attention until recently. Over the last decade, researchers have slowly but surely realized the critical role that LC plays in traffic operations and traffic safety; this realization has motivated significant attempts to model LC decision-making and its impact on traffic. Despite notable progresses in modelling CF and LC, our knowledge on these two important issues remains incomplete because of issues related to data, model calibration and validation, human factors, just to name a few. Thus, this special issue will focus on latest developments in modelling, calibrating, and validating two primary vehicular interactions observed in traffic flow: CF and LC.

Crystallite size effects in stacking faulted nickel hydroxide and its electrochemical behaviour

P-Nickel hydroxide comprises a long range periodic arrangement of atoms with a stacking sequence of AC AC AC-having an ideal composition Ni(OH)(2). Variation in the preparative conditions can lead to the changes in the stacking sequence (AC AC BA CB AC AC or AC AC AB AC AC) This type of variation in stacking sequence can result in the formation of stacking fault in nickel hydroxide. The stability of the stacking fault depends on the free energy content of the sample. Stacking faults in nickel hydroxide is essential for better electrochemical activity. Also there are reports correlating particle size to the better electrochemical activity. Here we present the effect of crystallite size on the stacking faulted nickel hydroxide samples. The electrochemical performance of stacking faulted nickel hydroxide with small crystallite size exchanges 0.8e/Ni, while the samples with larger crystallite size exchange 0.4e/Ni. Hence a right combination of crystallite size and stacking fault content has to be controlled for good electrochemical activity of nickel hydroxide. (C) 2008 Elsevier B.V. All rights reserved.

Behaviour of Bi-material interface cracks in the presence of material nonlinearity of adherends

The well known features of crack face interpenetration/contact at the tip of an interface crack is re-examined using finite element analysis and assuming material nonlinear properties for the adherends. It was assumed in literature that the crack tips are fully open at all load levels in the presence of material nonlinearity of the adherends. Analysis for the case of remote tension shows that even in the presence of material nonlinearity, crack tip closes at small load levels and opens above a certain load level. Mixed-mode fracture parameters are evaluated for the situation when the crack tips are fully open. Due to the presence of nonlinearity, the mixed-mode fracture parameters are measured with the symmetric and anti-symmetric components of J-integral. The present analysis explains the sequence of events at the interface crack tip with progressively increasing remote tension load for the case of adherends with material nonlinear behaviour.

The Risk of Cancer Associated with Immunosuppressive Therapy for Skin Diseases

The possible carcinogenic risk of immunosuppressive therapies is an important issue in everyday clinical practise. Carcinogenesis is a slow multi step procedure, thus a long latency period is needed before cancer develops. PUVA therapy is used for many skin diseases including psoriasis, early stage cutaneous T cell lymphoma, atopic dermatitis, palmoplantar pustulosis and chronic eczema. There has been concern about the increased melanoma risk associated to PUVA therapy, which has previously been associated with an increased risk on non-melanoma skin cancer, especially squamous cell carcinoma. The increased risk of basal cell carcinoma (BCC) is also documented but it is modest compared to squamous cell carcinoma (SCC). This thesis evaluated melanoma and noncutaneous cancer risk associated to PUVA, and the persistence of nonmelanoma cancer risk after the cessation of PUVA treatment. Also, the influence of photochemotherapy to the development of secondary cancers in cutaneous T cell lymphoma and the role of short term cyclosporine in later cancer development in inflammatory skin diseases were evaluated. The first three studies were performed on psoriasis patients. The risk of melanoma started to increase 15 years after the first treatment with PUVA. The risk was highest among persons who had received over 250 treatments compared to those under 250 treatments. In noncutaneous cancer, the overall risk was not increased (RR=1.08,95% CI=0.93-1.24), but significant increases in risk were found in thyroid cancer, breast cancer and in central nervous system neoplasms. These cancers were not associated to PUVA. The increased risk of SCC was associated to high cumulative UVA exposure in the PUVA regimen. The patients with high risk had no substantial exposure to other carcinogens. In BCC there was a similar but more modest tendency. In the two other studies, the risk of all secondary cancers (SIR) in CTCL patients was 1.4 (95% CI=1.0-1.9). In separate sites, the risk of lung cancer, Hodgkin and non-Hodgkin lymphomas were increased. PUVA seemed not to contribute to any extent to the appearance of these cancers. The carcinogenity of short-term cyclosporine was evaluated in inflammatory skin diseases. No increased risk for any type of cancer including the skin cancers was detected. To conclude, our studies confirm the increased skin cancer risk related to PUVA treatment in psoriasis patients. In clinical practice, this has led to a close and permanent follow-up of patients treated with PUVA. In CTCL patients, PUVA treatment did not contribute to the development of secondary cancers. We could not detect any increase in the risk of cancer in patients treated with short term cyclosporine, unlike in organ transplant patients under such long-term therapy.

BDST modelling of sodium ion exchange column behaviour with strong acid cation resin in relation to coal seam water treatment

Reverse osmosis is the dominant technology utilized for desalination of saline water produced during the extraction of coal seam gas. Alternatively, ion exchange is of interest due to potential cost advantages. However, there is limited information regarding the column performance of strong acid cation resin for removal of sodium ions from both model and actual coal seam water samples. In particular, the impact of bed depth, flow rate, and regeneration was not clear. Consequently, this study applied Bed Depth Service Time (BDST) models to reveal that increasing sodium ion concentration and flow rates diminished the time required for breakthrough to occur. The loading of sodium ions on fresh resin was calculated to be ca. 71.1 g Na/kg resin. Difficulties in regeneration of the resin using hydrochloric acid solutions were discovered, with 86% recovery of exchange sites observed. The maximum concentration of sodium ions in the regenerant brine was found to be 47,400 mg/L under the conditions employed. The volume of regenerant waste formed was 6.2% of the total volume of water treated. A coal seam water sample was found to load the resin with only 53.5 g Na/kg resin, which was consistent with not only the co-presence of more favoured ions such as calcium, magnesium, barium and strontium, but also inefficient regeneration of the resin prior to the coal seam water test.

Effect of indium doping on the electrical switching behaviour of Ge-Te glasses

Bulk Ge15Te85-xInx (1 <= x <= 11) series of glasses have been found to exhibit a threshold switching behaviour for an input current of 2 mA. An initial decrease is seen in the switching voltages (V-T) with the addition of indium, which is due to the higher metallicity of indium. An increase is seen in V-T above 3 at.% of indium, which proceeds until 8 at.%, with a change in slope (lower to higher) seen around 7 at.%. Beyond x = 8, a reversal in trend is exhibited in the variation of V-T, with a well-defined minimum around x = 9 at.%. Based on the composition dependence of V-T, it is proposed that Ge15Te85-xInx glasses exhibit an extended rigidity percolation threshold. The composition, x = 3, at which the V-T starts to increase and the composition, x = 7, at which a slope change is exhibited correspond to the onset and completion, respectively, of the extended stiffness transition. Thermal studies and photoconductivity e85-xInx glasses. In addition, the minimum seen in V-T at x = 9 is associated with the chemical threshold (CT) of this glassy system.