928 resultados para BIO-09


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The use of biofuels remotes to the eighteenth century, when Rudolf Diesel made the first trials using peanut oil as fuel in a compression ignition engine. Based on these trials, there was the need for some chemical change to vegetable oil. Among these chemical transformations, we can mention the cracking and transesterification. This work aims at conducting a study using the thermocatalytic and thermal cracking of sunflower oil, using the Al-MCM-41 catalyst. The material type mesoporous Al-MCM-41 was synthesized and characterized by Hydrothermical methods of X-ray diffraction, scanning electron microscopy, nitrogen adsorption, absorption spectroscopy in the infrared and thermal gravimetric analysis (TG / DTG).The study was conducted on the thermogravimetric behavior of sunflower oil on the mesoporous catalyst cited. Activation energy, conversion, and oil degradation as a function of temperature were estimated based on the integral curves of thermogravimetric analysis and the kinetic method of Vyazovkin. The mesoporous material Al-MCM-41 showed one-dimensional hexagonal formation. The study of the kinetic behavior of sunflower oil with the catalyst showed a lower activation energy against the activation energy of pure sunflower oil. Two liquid fractions of sunflower oil were obtained, both in thermal and thermocatalytic pyrolisis. The first fraction obtained was called bio-oil and the second fraction obtained was called acid fraction. The acid fraction collected, in thermal and thermocatalytic pyrolisis, showed very high level of acidity, which is why it was called acid fraction. The first fraction was collected bio-called because it presented results in the range similar to petroleum diesel

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present research carried out from three national dentistry magazines published in the period between 1990 and 2004, has as a goal to analyze how bioethics has been approached in this area, not only identifying the main concerns and tendencies, but also aiming to learn how this knowledge is produced and divulged in the dentistry circuit. We have articulated a quantitative-qualitative approach, studying 2995 articles. The articles were selected and assorted in twenty thematic categories, through their titles and key words. The analysis of the empiric material shows that, although there is a growth tendency of this discussion, little has been published about this theme (1,9%). Besides, it seems that there is an arrhythmia between the present bioethic approach in dentistry and the present life demands, where the deontology and legalist focuses are predominant, seeming to correspond to the inner aspects of the profession alone. In spite of this, through the qualitative approach it was possible to identify ways to build a more complex and integral odontological formation and practice. Within the conclusions, we still point out, that, this investigation, even face to its limitations, seems to offer subsidies for reflection and further studies about the theme, working as a parameter to keep up with the evolution of the bioethic thinking in the Odontology

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of the present study was to evaluate the efficiency of the process of biodigestion of the protein concentrate resulting from the ultrafiltration of the effluent from a slaughterhouse freezer of Nile tilapia. Bench digesters were used with excrements and water (control) in comparison with a mixture of cattle manure and effluent from the stages of filleting and bleeding of tilapias. The effluent obtained in the continuous process (bleeding + filleting) was the one with highest accumulated population from the 37th day, as well as greatest daily production. Gases composition did not differ between the protein concentrates, but the gas obtained with the use of the effluent from the filleting stage presented highest methane gas average (78.05%) in comparison with those obtained in the bleeding stage (69.95%) and in the continuous process (70.02%) or by the control method (68.59%).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The fat acid esters and tocopherolic derivatives are of great economic interest in many industries. The sunflower oil, which had its rich constitution in these composites, is a very interesting raw material source for the job in some sectors as bio-carburants, bio-lubrificants, bio-surfactants, dispersing agents, food industries, medicines and cosmetics. A system emulsified steady from this oil can wide be used in the therapeutical one, therefore it is of easy acceptance for the patient, for being pharmaceutical forms that allow a better medicine administration. The chemical composition characteristics, rich in unsaturad fat acid and tocopherolic derivatives, the sunflower oil, make of the emulsified systems contend this oil a proposal promising for formularizations of pharmaceutical and cosmetic use with antirust and photoprotection. The general objective of this work was to apply the HLB beddings to determine the sunflower oil critical HLB and, from this, to be able to evaluate the ideal mixture of the constituent of this system through the study of the ternary diagrams for the determination of the ratio of constituent that will generate the emulsion most steady

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Os objetivos deste estudo foram avaliar Azolla caroliniana como planta-teste em estudos ecotoxicológicos e estimar a CL50;7d dos herbicidas 2,4-D, glyphosate, clomazone e oxyfluorfen. As plantas foram aclimatadas em sala de bioensaio. Para isso, foram selecionadas cinco plantas em 50 mL de meio de cultivo Hoagland. Após esse período, foram adicionados 50 mL de Hoagland mais o herbicida, completando o volume para 100 mL. A concentração letal de 50% (CL50;7d) para A. caroliniana exposta ao herbicida 2,4-D foi de 708,35 mg L-1; ao glyphosate (formulação Scout®), de 23,66 mg L-1; ao glyphosate (formulação Trop®), de 38,91 mg L-1; ao clomazone, de 129,63 mg L-1; e ao oxyfluorfen, de 80,50 mg L-1. Os herbicidas glyphosate (Scout® e Trop®) e oxyflourfen foram classificados como moderadamente tóxicos a A. caroliniana, e o clomazone e o 2,4-D, como praticamente não tóxicos. Conclui-se que A. caroliniana pode ser utilizada como planta bioindicadora de herbicidas à base de glyphosate e oxyfluorfen.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

L étude vient de présenter la recherche qui a eu lieu pendent la formation des professeurs d l'Institut d'Enseignement Supérieur Président Kennedy à Natal-RN, dont les sujets son les professeurs de la septième période du Cours Normal Supérieur. L objet d´étude sont les pratiques formatives de ces professeurs en formation par des difficultés qui ils présentaient pour comprendre les relations entre les domaines de connaissance le l interface avec les expériences, et le processus de formation. L objectif a éte identifier dans l expériences ludopoèthiques, les lieus de construction de l autoterritorialité des professeus en tant qu en formation. Parmi les pressuposés théoriques qui ont soutenu le développement de la recherche comprennent: Enseignement Humain ; Corps-espace; Corporéité; Auto-formation et Transdisciplinarité. L'approche de la recherche qualitative adopte les principes de la rechercheaction- formation, dans une perspective etnophenomenologique. La discipline Memorial de Formação avec l'utilisation de jeu de sable,a été le laboratoire des expériences, l outil de la recherche qui a subventionné la construction des narratives autobiographiques. La perspective transdisciplinaire sur l'étude a rassemblé dans la dimension épistémologique les références théoriques de la Géographie, de la corporéité. et des histoires de vie dans la formation. L'Atelier Corps (Bio) Géographique a été développé par cinq rencontres: Paysage du Sensible, Lieu de Sentipensar, Territoires des Découvertes, Région des Savoirs et de l'Espace Géographique de la Ecoformação. Les expériences vécues dans l'Atelier par les participants de la recherche ont permis une sensible et attentive écoute sur leur propre histoire, en donnant la possibilité de la reconstruction de la mémoire, et en faisant réfléchir sur son l'auto-formation. La découverte des cartes et la construction d un nouveau paysage autoformatif par les memoires ludiques des différentes phases de la vie, a fait apparaître la propriété ludopoètique de l autoterriotalité, au même temps qui a enrégistré la construction ontologique dans sa corporéité

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Foi desenvolvido um modelo bioeconômico para o cálculo do desempenho, dos custos e das receitas para obtenção de valores econômicos de características de interesse econômico em sistemas de produção de gado de corte no Brasil. As informações de desempenho e de parâmetros biológicos e econômicos foram obtidas em uma propriedade de gado Nelore que realiza ciclo completo com venda de reprodutores. O modelo é determinístico e estático e foram usadas planilhas Excel para a realização dos cálculos. Com base nas informações originais, foram simulados dois sistemas de produção, um fazendo o ciclo completo com venda de reprodutores (CcoR) e o outro, de cria (Cc). Foram calculados os custos e as receitas para esses dois sistemas e, a partir disto, foram obtidos seus lucros anuais. Para o cálculo dos valores econômicos foram escolhidas as características peso à desmama (PD), peso adulto da vaca (PAV), taxa de prenhez (TP) e taxa de desmama (TD), que são de interesse nos dois sistemas de produção. Para avaliar o impacto das mudanças no desempenho das características sobre o lucro anual do sistema de produção, os valores iniciais das características foram aumentados em 1%. Esse aumento resultou em mudanças positivas no lucro, observando-se que a TD foi a característica que apresentou maior impacto nos dois sistemas. Para o CcoR, os valores econômicos para PD, PAV, TP e TD foram, respectivamente, R$ 0,40/kg, R$ 0,09/kg, R$ 3,20/1% e R$ 10,15/1%. Para Cc, estes valores foram, respectivamente, de R$ 1,31/kg, R$ 0,09/kg, R$ 2,41/1% e R$ 3,36/1%. O modelo foi capaz de reproduzir satisfatoriamente o sistema de produção de gado de corte estudado e pode ser adaptado para outras circunstâncias de produção.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A importância econômica de possíveis características biológicas a serem incluídas em objetivos de seleção para diferentes sistemas de produção de bovinos da raça Nelore, mediante o cálculo dos seus valores econômicos foi avaliada nesta pesquisa. Com base em informações de desempenho e parâmetros biológicos e econômicos, foram simulados diferentes sistemas de produção (ciclos de cria e completo) para dois rebanhos. O rebanho 1, com ciclo de cria (Ccr), ciclo completo (Cco) e ciclo completo com venda de reprodutores (CcoR), é um rebanho elite no qual é desenvolvido um programa seleção. Parte deste rebanho é também destinada à produção de animais comerciais. O rebanho 2 é um rebanho exclusivamente comercial, com Ccr e Cco. Os valores econômicos foram calculados usando-se um modelo bio-econômico, para as seguintes características: peso (PD) e taxa de desmama (TD), peso da vaca adulta (PVA), ganho médio diário no confinamento (GMD), pesos ao abate (PA) e de carcaça (PC), peso final dos tourinhos (PFT), rendimento de carcaça (RC) e consumo alimentar no confinamento (CAc) e em pastagem (CAp). Para os sistemas de ciclo completo e de ciclo completo com venda de reprodutores e CcoR (Cco e CcoR), os valores econômicos variaram de R$ 0,34 a R$ 0,40 para PD, R$ 3,51 a R$ 10,15 para TD, -R$ 0,16 a R$ 0,09 para PAV, R$ 0,32 a R$ 0,76 para GMDc, R$ 1,09 a R$ 1,17 para PA; R$ 2,03 a R$ 2,19 para PC, R$ 23,89 a R$ 28,61 para RC, e R$ 11,85 para PFT, - R$0,45 para CAc e - R$ 0,03 para CAp. A taxa de desmama e o rendimento de carcaça foram as características de maior impacto no lucro anual dos dois rebanhos. As análises de sensibilidade demonstraram que, de modo geral, possíveis mudanças nos preços de insumos e produtos influenciariam de forma mais significativa os valores econômicos nos sistemas de produção nos quais esses preços eram mais elevados nas situações básicas.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Agaricus blazei Murill is a medicinal mushroom native to Brazil. The present work assessed the clastogenic and anticlastogenic potential of organic extracts (ethanol and chloroform/methanol) from the lineage AB97/11 in chinese hamster CHO-K-1 (wild type) and CHO-xrs5 (repair deficient) cells using the chromosome aberration (CA) and sister chromatid exchange (SCE) assays. In these experimental conditions were observed: (a) anticlastogenic effect at concentrations of 0.06 and 0.09% of the EtOH extract and at the 0.03 and 0.06% concentrations of the C/MetOH extract in CHO-K-1; (b) absence of protector effect on CHO-xrs5 cells; and (c) absence of protector effect in the SCE assay. These results indicate that organic extracts of A. blazei lineage AB97/11 present bio-antimutagenic type protective activity. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The tricalcium phosphate ceramics has been widely investigated in the last years due its bioresorbable behavior. The limiting factor of the application of these materials as temporary implants is its low strength resistance. The tricalcium phosphate presents an allotropic transformation β→α around 1250 ºC that degrades its resistance. Some studies have been developed in order to densify this material at this temperature range. The objective of this work is to study the influence of the addition of magnesium oxide (MgO) in the sintering of β-TCP. The processing route was uniaxial hot pressing and its objective was to obtain dense samples. The samples were physically characterized through density and porosity measurements. The thermal behavior was studied through dilatometric, thermal differential and thermogravimetric analysis. The mechanical properties were characterized by three point flexure test and Vickers microhardness measurements, analyzed of the microstructure. The addition of magnesium oxide doesn t cause an improvement of the mechanical strength in relation to material without additive.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The bio-oil obtained from the pyrolysis of biomass has appeared as inter-esting alternative to replace fossil fuels. The aim of this work is to evaluate the influence of temperature on the yield of products originating from the pyrolysis process of the powder obtained from the dried twigs of avelós (Euphorbia tirucalli), using a rotating cylinder reactor in laboratory scale. The biomass was treated and characterized by: CHNS, moisture, volatiles, fixed carbon and ashes, as well as evaluation of lignin, cellulose and hemicellulose, besides other instrumental techniques such as: FTIR, TG/DTG, DRX, FRX and MEV. The activation energy was evaluated in non-isothemichal mode with heating rates of 5 and 10 oC/min. The obtained results showed biomass as feedstock with potential for biofuel production, because presents a high organic matter content (78,3%) and fixed-carbon (7,11%). The activation energy required for the degradation of biomass ranged between 232,92 392,84 kJ/mol, in the temperature range studied and heating rate of 5 and 10°C/min. In the pyrolysis process, the influence of the reaction temperature was studied (350-520 ° C), keeping constant the other variables, such as, the flow rate of carrier gas, the centrifugal speed for the bio-oil condensationa, the biomass flow and the rotation of the reactor. The maximum yield of bio-oil was obtained in the temperature of 450°C. In this temperature, the results achieved where: content of bio-oil 8,12%; char 32,7%; non-condensed gas 35,4%; losts 23,8%; gross calorific value 3,43MJ/kg; pH 4,93 and viscosity 1,5cP. The chromatographic analysis of the bio-oil produced under these conditions shows mainly the presence of phenol (17,71%), methylciclopentenone (10,56%) and dimethylciclopentenone (7,76%)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this work, cellulose nanofibers were extracted from banana fibers via a steam explosion technique. The chemical composition, morphology and thermal properties of the nanofibers were characterized to investigate their suitability for use in bio-based composite material applications. Chemical characterization of the banana fibers confirmed that the cellulose content was increased from 64% to 95% due to the application of alkali and acid treatments. Assessment of fiber chemical composition before and after chemical treatment showed evidence for the removal of non-cellulosic constituents such as hemicelluloses and lignin that occurred during steam explosion, bleaching and acid treatments. Surface morphological studies using SEM and AFM revealed that there was a reduction in fiber diameter during steam explosion followed by acid treatments. Percentage yield and aspect ratio of the nanofiber obtained by this technique is found to be very high in comparison with other conventional methods. TGA and DSC results showed that the developed nanofibers exhibit enhanced thermal properties over the untreated fibers. (C) 2010 Elsevier Ltd. All rights reserved.

Relevância:

20.00% 20.00%

Publicador: