Managing for rainfall variability: effect of grazing strategy on cattle production in a dry tropical savanna

Rainfall variability is a challenge to sustainable and pro. table cattle production in northern Australia. Strategies recommended to manage for rainfall variability, like light or variable stocking, are not widely adopted. This is due partly to the perception that sustainability and profitability are incompatible. A large, long-term grazing trial was initiated in 1997 in north Queensland, Australia, to test the effect of different grazing strategies on cattle production. These strategies are: (i) constant light stocking (LSR) at long-term carrying capacity (LTCC); (ii) constant heavy stocking (HSR) at twice LTCC; (iii) rotational wet-season spelling (R/Spell) at 1.5 LTCC; (iv) variable stocking (VAR), with stocking rates adjusted in May based on available pasture; and (v) a Southern Oscillation Index (SOI) variable strategy, with stocking rates adjusted in November, based on available pasture and SOI seasonal forecasts. Animal performance varied markedly over the 10 years for which data is presented, due to pronounced differences in rainfall and pasture availability. Nonetheless, lighter stocking at or about LTCC consistently gave the best individual liveweight gain (LWG), condition score and skeletal growth; mean LWG per annum was thus highest in the LSR (113 kg), intermediate in the R/Spell (104 kg) and lowest in the HSR(86 kg). MeanLWGwas 106 kg in the VAR and 103 kg in the SOI but, in all years, the relative performance of these strategies was dependent upon the stocking rate applied. After 2 years on the trial, steers from lightly stocked strategies were 60-100 kg heavier and received appreciable carcass price premiums at the meatworks compared to those under heavy stocking. In contrast, LWG per unit area was greatest at stocking rates of about twice LTCC; mean LWG/ha was thus greatest in the HSR (21 kg/ha), but this strategy required drought feeding in four of the 10 years and was unsustainable. Although LWG/ha was lower in the LSR (mean 14 kg/ha), or in strategies that reduced stocking rates in dry years like the VAR(mean 18 kg/ha) and SOI (mean 17 kg/ha), these strategies did not require drought feeding and appeared sustainable. The R/Spell strategy (mean 16 kg/ha) was compromised by an ill-timed fire, but also performed satisfactorily. The present results provide important evidence challenging the assumption that sustainable management in a variable environment is unprofitable. Further research is required to fully quantify the long-term effects of these strategies on land condition and profitability and to extrapolate the results to breeder performance at the property level.

Semanttisen webin ontologisen tekstiilikäsitteistön kehittäminen ja liittäminen museoiden luettelointitietoihin

DEVELOPING A TEXTILE ONTOLOGY FOR THE SEMANTIC WEB AND CONNECTING IT TO MUSEUM CATALOGING DATA The goal of the Semantic Web is to share concept-based information in a versatile way on the Internet. This is achievable using formal data structures called ontologies. The goal of this re-search is to increase the usability of museum cataloging data in information retrieval. The work is interdisciplinary, involving craft science, terminology science, computer science, and museology. In the first part of the dissertation an ontology of concepts of textiles, garments, and accessories is developed for museum cataloging work. The ontology work was done with the help of thesauri, vocabularies, research reports, and standards. The basis of the ontology development was the Museoalan asiasanasto MASA, a thesaurus for museum cataloging work which has been enriched by other vocabularies. Concepts and terms concerning the research object, as well as the material names of textiles, costumes, and accessories, were focused on. The research method was terminological concept analysis complemented by an ontological view of the Semantic Web. The concept structure was based on the hierarchical generic relation. Attention was also paid to other relations between terms and concepts, and between concepts themselves. Altogether 977 concept classes were created. Issues including how to choose and name concepts for the ontology hierarchy and how deep and broad the hierarchy could be are discussed from the viewpoint of the ontology developer and museum cataloger. The second part of the dissertation analyzes why some of the cataloged terms did not match with the developed textile ontology. This problem is significant because it prevents automatic ontological content integration of the cataloged data on the Semantic Web. The research datasets, i.e. the cataloged museum data on textile collections, came from three museums: Espoo City Museum, Lahti City Museum and The National Museum of Finland. The data included 1803 textile, costume, and accessory objects. Unmatched object and textile material names were analyzed. In the case of the object names six categories (475 cases), and of the material names eight categories (423 cases), were found where automatic annotation was not possible. The most common explanation was that the cataloged field was filled with a long sentence comprised of many terms. Sometimes in the compound term, the object name and material, or the name and the way of usage, were combined. As well, numeric values in the material name cataloging field prevented annotation and so did the absence of a corresponding concept in the ontology. Ready-made drop-down lists of materials used in one cataloging system facilitated the annotation. In the case of naming objects and materials, one should use terms in basic form without attributes. The developed textile ontology has been applied in two cultural portals, MuseumFinland and Culturesampo, where one can search for and browse information based on cataloged data using integrated ontologies in an interoperable way. The textile ontology is also part of the national FinnONTO ontology infrastructure. Keywords: annotation, concept, concept analysis, cataloging, museum collection, ontology, Semantic Web, textile collection, textile material

Validating economic and environmental sustainability of a short-term summer forage legume in dryland wheat cropping systems in south-west Queensland.

The present study set out to test the hypothesis through field and simulation studies that the incorporation of short-term summer legumes, particularly annual legume lablab (Lablab purpureus cv. Highworth), in a fallow-wheat cropping system will improve the overall economic and environmental benefits in south-west Queensland. Replicated, large plot experiments were established at five commercial properties by using their machineries, and two smaller plot experiments were established at two intensively researched sites (Roma and St George). A detailed study on various other biennial and perennial summer forage legumes in rotation with wheat and influenced by phosphorus (P) supply (10 and 40 kg P/ha) was also carried out at the two research sites. The other legumes were lucerne (Medicago sativa), butterfly pea (Clitoria ternatea) and burgundy bean (Macroptilium bracteatum). After legumes, spring wheat (Triticum aestivum) was sown into the legume stubble. The annual lablab produced the highest forage yield, whereas germination, establishment and production of other biennial and perennial legumes were poor, particularly in the red soil at St George. At the commercial sites, only lablab-wheat rotations were experimented, with an increased supply of P in subsurface soil (20 kg P/ha). The lablab grown at the commercial sites yielded between 3 and 6 t/ha forage yield over 2-3 month periods, whereas the following wheat crop with no applied fertiliser yielded between 0.5 to 2.5 t/ha. The wheat following lablab yielded 30% less, on average, than the wheat in a fallow plot, and the profitability of wheat following lablab was slightly higher than that of the wheat following fallow because of greater costs associated with fallow management. The profitability of the lablab-wheat phase was determined after accounting for the input costs and additional costs associated with the management of fallow and in-crop herbicide applications for a fallow-wheat system. The economic and environmental benefits of forage lablab and wheat cropping were also assessed through simulations over a long-term climatic pattern by using economic (PreCAPS) and biophysical (Agricultural Production Systems Simulation, APSIM) decision support models. Analysis of the long-term rainfall pattern (70% in summer and 30% in winter) and simulation studies indicated that ~50% time a wheat crop would not be planted or would fail to produce a profitable crop (grain yield less than 1 t/ha) because of less and unreliable rainfall in winter. Whereas forage lablab in summer would produce a profitable crop, with a forage yield of more than 3 t/ha, ~90% times. Only 14 wheat crops (of 26 growing seasons, i.e. 54%) were profitable, compared with 22 forage lablab (of 25 seasons, i.e. 90%). An opportunistic double-cropping of lablab in summer and wheat in winter is also viable and profitable in 50% of the years. Simulation studies also indicated that an opportunistic lablab-wheat cropping can reduce the potential runoff+drainage by more than 40% in the Roma region, leading to improved economic and environmental benefits.

Anthraquinones from the Fungus Dermocybe sanguinea as Textile Dyes

This study is based on the multidiciplinary approach of using natural colorants as textile dyes. The author was interested in both the historical and traditional aspects of natural dyeing as well as the modern industrial applications of the pure natural compounds. In the study, the anthraquinone compounds were isolated as aglycones from the ectomycorrhizal fungus Dermocybe sanguinea. The endogenous beta-glucosidase of the fungus was used to catalyse the hydrolysis of the O-glycosyl linkage in emodin- and dermocybin-1-beta-D-glucopyranosides. The method, in which 10.45 kg of fresh fungi was starting material, yielded two fractions: 56.0 g of Fraction 1 (94% of the total amount of pigment,) consisting almost exclusively of the main pigments emodin and dermocybin, and 3.3 g of Fraction 2 (6%) consisting mainly of the anthraquinone carboxylic acids. The anthraquinone compounds in Fractions 1 and 2 were separated by one- and two-dimensional thin-layer-chromatography (TLC) using silica plates. 1D TLC showed that neither an acidic nor a basic solvent system alone separated completely all the anthraquinones isolated from D. sanguinea, in spite of the variation of the rations of the solvent components in the systems. Thus, a new 2D TLC technique was developed, applying n-pentanol-pyridine-methanol (6:4:3, v/v/v) and toluene-ethyl acetate-ethanol-formic acid (10:8:1:2, v/v/v/v) as eluents. Fifteen different anthraquinone derivatives were completely separated from one another. Emodin, physcion, endocrocin, dermolutein, dermorubin, 5-chlorodermorubin, emodin-1-beta-D-glucopyranoside, dermocybin-1-beta-D-glucopyranoside and dermocybin, and five new compounds, not earlier identified in D. sanguinea, 7-chloroemodin, 5,7-dichloroemodin, 5,7-dichloroendocrocin, 4-hydroxyaustrocorticone and austrocorticone, were separated and identified on the basis of their Rf-values, UV/Vis spectra and mass spectra. One substance remained unidentified, because of its very low concentration. The anthraquinones in Fractions 1 and 2 were preparatively separeted by liquid-liquid partition, with isopropylmethyl ketone and aqueous phosphate buffer as the solvent system. Advantage was taken of the principle of stepwise pH-gradient elution. The multiple liquid-liquid partition (MLLP) offered an excellent method for the preparative separation of compounds, which contain acidic groups such as the phenolic OH and COOH groups. Due to their strong aggregation properties, these compounds are, without derivatization, very difficult to separate on a preparative scale by chromatographic methods. By the MLLP method remarkable separations were achieved for the components in each mixture. Emodin and dermocybin were both obtained from Fraction 1 in a purity of at least 99%. Pure emodin and dermocybin were applied as mordant dyes to wool and polyamide and as disperse dyes to polyester and polyamide, using the high temperature (HT) technique. A mixture of dermorubin and 5-chlorodermorubin was applied as an acid dye to wool. In these experiments, synthetic dyes were used as references. Experiments were also performed using water extract of the air-dried fungi as dye liquor for wool and silk. The main colouring compounds in the crude water extract were emodin and dermocybin, which indicated that the O-glycosyl linkages in emodin- and dermocybin-1-beta-D-glucopyranosides were broken by the beta-glucosidase enzyme. Apparently, the hydrolysis occurred during the drying of the fungi and during the soaking of the dried fruit bodies overnight when preparing the dyebath. The colour of each dyed material was investigated in terms of the CIELAB L*, a* and b* values, and the colour fastness to light, washing and rubbing was tested according to the ISO standards. In the mordant dyeing experiments, emodin dyed wool and polyamide yellow and red, depending on the pH of the dyebath. Dermocybin gave purple and violet colours. The colour fastness of the mordant-dyed fabrics varied from good to moderate. The fastness properties of the natural anthraquinone carboxylic acids on wool were good, indicating the strength of the ionic bonds between the COO- groups of the dyes and the NH3+ groups of the fibres. In the disperse dyeing experiments, emodin dyed polyester bright yellow and dermocybin bright reddish-orange, and the fabrics showed excellent colour fastness. In contrast, emodin and dermocybin successfully dyed polyamide brownish-orange and wine-red, respectively, but with only moderate fastness. In industrial dyeing processes, natural anthraquinone aglycone mixtures dyed wool and silk well even at low concentrations of mordants, i.e. with 10% of the weight of the fibre (owf) of KAl(SO4)2 and 1 or 0.5% owf of other mordants. This study showed that purified natural anthraquinone compounds can produce bright hues with good colour-fastness properties in different textile materials. Natural anthraquinones have a significant potential for new dyeing techniques and will provide useful alternatives to synthetic dyes.

Interaction in the Multicultural Classroom : Towards Culturally Sensitive Home Economics Education

Continuous growth in the number of immigrant students has changed the Finnish school environment. The resulting multicultural school environment is new for both teachers and students. In order to develop multicultural learning environments, there is a need to understand immigrant students everyday lives in school. In this study, home economics is seen as a fruitful school subject area for understanding these immigrant students lives as they cope with school and home cultures that may be very different from each other. Home economics includes a great deal of knowledge and skills that immigrant students need during their everyday activities outside of school. -- The main aim of the study is to clarify the characteristics of multicultural home economics classroom practices and the multicultural contacts and interaction that take place between the students and the teacher. The study includes four parts. The first part, an ethnographical prestudy, aims to understand the challenges of multicultural schoolwork with the aid of ethnographical fieldwork done in one multicultural school. The second part outlines the theoretical frames of the study and focuses on the sociocultural approach. The third part of the study presents an analysis of videodata collected in a multicultural home economics classroom. The teacher s and students interaction in the home economics classroom is analyzed through the concepts of the sociocultural approach and the cultural-historical activity theory. Firstly, this is done by analyzing the focusedness of the teacher s and the students actions as well as the questions presented and apparent disturbances during classroom interaction. Secondly, the immigrant students everyday experiences and cultural background are examined as they appear during discussions in the home economics lessons. Thirdly, the teacher s tool-use and actions as a human mediator are clarified during interaction in the classroom. The fourth part presents the results, according to which a practice-based approach in the multicultural classroom situation is a prerequisite for the teacher s and the students shared object during classroom interaction. Also, the practice-based approach facilitates students understanding during teaching and learning situations. Practice in this study is understood as collaborative teaching and learning situations that include 1) guided activating learning, 2) establishing connections with students everyday lives and 3) multiple tool-use. Guided activating learning in the classroom is defined as situations that occur and assignments that are done with a knowledgeable adult or peer and include action. The teacher s demonstrations during the practical part of the lessons seemed to be fruitful in the teaching and learning situations in the multicultural classroom. Establishing connections with students everyday lives motivated students to follow the lesson and supported understanding of meaning. Furthermore, if multiple tools (both psychological and material) were used, the students managed better with new and sometimes difficult concepts and different working habits, and accomplished the practical work more smoothly . The teacher s tool-use and role as a mediator of meaning are also highlighted in the data analysis. Hopefully, this study can provide a seedbed for situations in which knowledge produced together, as well as horizontally oriented tool-use, can make school-learned knowledge more relevant to immigrant students everyday lives, and help students to better cope with both classroom work and outside activities. KEY WORDS: home economics education, multicultural education, sociocultural perspective, classroom interaction, videoanalysis

Käsityöläisyyden kuva kultasepän ammatissa : Käsityöläisyys Suomen Kultaseppien Liiton lehdessä 1990-luvun lopussa

The aim of this study is to survey the meaning of craftmanship in goldsmith occupation. The image of craftmanship is built theoretically as well as researcher's own practical experience. The study describes a dialogue between self-employed goldsmith s everyday work and trade union's opinion. Suomen Kultaseppien Liitto (The Goldsmith Assosiation of Finland) was chosen forthe trade union, because it is the biggest, the oldest and the most influential on the occupational area. The research data are volumes 1995 - 1998 of occupational membership journal of Suomen Kultaseppien Liitto. The data analyzed with Adapted Content Analysis and Grounded Theory. The professional occupation of goldsmiths, the role of craftmanship and the future of the occupation are discussed. Additionally, the relationship between the Suomen Kultaseppien Liitto and occupational culture and profession of goldsmiths was studied. Craft and craftmanship is most often discussed in articles related to tradition and education.Craftmanship is understood very idealistically, with little meaning in practical life. St. Eligius and the skill and art of goldsmiths in St Petersburg are raised to symbols of craftmanship. The occupational image is broken and a clear conflict between education and occupation is visible. Education produces artist-craftsmen, while handicraft workers are required in industry, and retailers or specially trained store assistant in business. Computer-aided design and manufacture render handicraft workmanship unnecessary. In a pessimistic view, the future possibilities of the goldsmith occupational profession are dim, because the artist-craftsmen are bound to lose to fast-paced machines. On the other hand, people involved in goldsmith education see the future light, designer-goldsmiths developing the occupational to new dimensions. Suomen Kultaseppien Liitto represents goldsmiths in public. The union, however is governed by non-artisan goldsmiths. The union stresses business attitudes and enterpreneurship, and has succeeded in protecting the privileges of retailers and industry. Goldsmiths profession is seen in the research data as a combination of precious-metal industry, jewellery and watch stores, anda goldsmith shop is considered a specialized giftstore. The goldsmiths occupation is not a profession, and the Suomen Kultaseppien Liitto is not a trade union for artist and craftmen. Accordingly, part of the representative authority of the union could be transferred from the Association to Taidekäsityöläiset Taiko ry, a member of organization of Ornamo. Results of this study show the importance of defining the images of the goldsmith occupational profession and the trade union. The results could be applied to goldsmith education to examine what would be the optimal education and training for present employment opportunities. The important background theories has been the theories of Habermas and Lévi-Strauss.

Neulemallien muodikkuus : Näkyvätkö kansainväliset muotitrendit suomalaisten käsityölehtien neulemalleissa?

The aim of this work was to study, whether international fashion trends show in knit designs in Finnish craft magazines and how trends are modified. Women s knitted clothes and accessories in autumn winter season 2005 2006 were analyzed. Future research, trends, fashion, designing and knitting provides theoretical basis for this study. The trend material of this study came from Carlin Women s knitwear winter 2005 2006, which is fashion forecast for Women s knitwear. In addition to the trend book, I selected two international fashion magazines to reinforce this study. Fashion magazines were L´Officiel, 1000 models, Milan New York winter 05/06, No 52, April 2005 and Collezioni Donna, Prêt-à-porter autumn-winter 2005 2006, No 107. Finnish craft magazines in this study were MODA s issues 4/2005, 5/2005, 6/2005 and Novita s issues autumn 2005, winter 2005 and Suuri Käsityölehti s issues 8/2005, 9/2005, 10/2005. For the base of the analyze I took themes from the trend book. From fashion magazines I searched knitwear designs and these designs were sorted out by themes of trend book. To this trend and fashion material I compared knit designs from craft magazines. I analyzed how fashion trends show in knit designs and how they are modified. I also studied what features of trends were shown and which did not appear in knit designs of the craft magazines. For analyzing trend pictures and knit designs in craft magazines I applied qualitative content analysis and image analysis. According to the results of this research, effects of trend can be recognized in knit designs of craft maga-zines, although the fashion trends have been applied very discreetly. Knit designs were very similar re-gardless of magazine. The craft magazine data included approximately as many designs from Novita and MODA. In Suuri Käsityölehti provided only fifth of the designs data. There were also designs in MODA and Suuri Käsityölehti, which were made of Novita s yarns. This research material includes yarns of 15 different yarn manufacturers. Although half of all knit designs were knitted from Novita s yarn. There were 10 different yarns from Novita. Nevertheless Novita s yarn called Aino was the most popular. Finnish craft magazines have not respond to popularity of knitting. Magazines do not provide any novelty designs for knitters. Knit designs in Finnish craft magazines are usually practical basic designs without any innovativeness.

Verkkokurssilla : Opiskelijoiden kokemuksia toiminnasta yhteisöllisessä oppimisprosessissa Fle2-ympäristössä ja kokemusten näkyminen toimintaan osallistumisessa

The study examines one case of students' experiences from the activity in a collaborative learning process in a networked learning environment, and explores whether or not the experiences explain the participation or lack of participation in the activities. As a research task the students' experiences in the database of the networked learning environment, participating in its construction, and the ways of working needed to build the database, were examined. To contrast the students' experiences, their actual participation in the building of the database was clarified. Based on actual participation, groups more active and more passive than average were separated, and their experiences were compared to each other. The research material was collected from the course Cognitive and Creative Processes, which was offered to studentsof the Department of Textile Teacher Education in University of Helsinki, and students of the Departments of Teacher Education Units giving textile education in Turku, Rauma and Savonlinna in the beginning of 2001. In this course, creativity was examined from a psychological and sosiocultural context with the aim of realizing a collaborative progressive inquiry process. The course was held in a network-based Future Learning Environment (Fle 2) except for the starting lecture and training the use of the learning environment. This study analyzed the learning diaries that the students had sent to the tutor once a week for four weeks, and the final thoughts written into the database of the learning environment. Content analysis was applied as the research method. The case was enriched from another point of view by examining the messages the students had written into the learning environment with the social network analysis. The theoretical base of the study looks at the research of computer-supported collaborative learning, the conceptions of learning as a process of participation and knowledge building, and the possibilities and limitations of network-based learning environments. The research results show, that both using the network-based learning environment and collaborative ways of studying were new to the students. The students were positively surprised by the feedback and support provided by the community. On the other hand, they also experienced problems with facelessness and managing the information in the learning environment. The active students seemed to be more ready for a progressive inquiry process. It can be seen from their attitudes and actions that they have strived to participate actively and invested into the process both from their own and the community's point of view. The more passive students reported their actions to get credits and they had a harder time of perceiving the thoughts presented in the net as common progression. When arranging similar courses in the future, attention should be paid to how to get the students to act in ways necessary for knowledge building, and different from more traditional ways of studying. The difficulties of students used to traditional studying methods to adapt to collaborative knowledge building were evident on the course Cognitive and Creative Processes. Keywords: computer supported collaborative learning, knowledge building, progressive Inquiry, participation

Tekstiilityötä ja matematiikkaa yhdistävän oppimateriaalin käyttökelpoisuus perusopetuksen yläluokilla

In this study the researcher wanted to show the observed connection of mathematics and textile work. To carry this out the researcher designed a textbook by herself for the upper secondary school in Tietoteollisuuden Naiset TiNA project at Helsinki University of Technology (URL:http://tina.tkk.fi/). The assignments were designed as additional teaching material to enhance and reinforce female students confidence in mathematics and in the management of their textile work. The research strategy applied action research, out of which two cycles two have been carried out. The first cycle consists of establishing the textbook and in the second cycle its usability is investigated. The third cycle is not included in this report. In the second cycle of the action research the data was collected from 15 teachers, five textile teachers, four mathematics teachers and six teachers of both subjects. They all got familiar with the textbook assignments and answered a questionnaire on the basis of their own teaching experience. The questionnaire was established by applying the theories of usability and teaching material assessment study. The data consisted of qualitative and quantitative information, which was analysed by content analysis with computer assisted table program to either qualitative or statistical description. According to the research results, the textbook assignments seamed to be applied better to mathematics lessons than textile work. The assignments pointed out, however, the clear interconnectedness of textile work and mathematics. Most of the assignments could be applied as such or as applications in the upper secondary school textile work and mathematics lessons. The textbook assignments were also applicable in different stages of the teaching process, e.g. as introduction, repetition or to support individual work or as group projects. In principle the textbook assignments were in well placed and designed in the correct level of difficulty. Negative findings concerned some too difficult assignments, lack of pupil motivation and unfamiliar form of task for the teacher. More clarity for some assignments was wished for and there was especially expressed a need for easy tasks and assignments in geometry. Assignments leading to the independent thinking of the pupil were additionally asked for. Two important improvements concerning the textbook attainability would be to get the assignments in html format over the Internet and to add a handicraft reference book.

Can the direct measurement of the load applied on the residuum of individuals with transfemoral amputation fitted with bone-anchored prosthesis help to improve the rehabilitation program?

To strive to improve the rehabilitation program of individuals with transfemoral amputation fitted with bone-anchored prosthesis based on data from direct measurements of the load applied on the residuum we first of all need to understand the load applied on the fixation. Therefore the load applied on the residuum was first directly measured during standardized activities of daily living such as straight line level walking, ascending and descending stairs and a ramp and walking around a circle. From measuring the load in standardized activities of daily living the load was also measured during different phases of the rehabilitation program such as during walking with walking aids and during load bearing exercises.[1-15] The rehabilitation program for individuals with a transfemoral amputation fitted with an OPRA implant relies on a combination of dynamic and static load bearing exercises.[16-20] This presentation will focus on the study of a set of experimental static load bearing exercises. [1] A group of eleven individuals with unilateral transfemoral amputation fitted with an OPRA implant participated in this study. The load on the implant during the static load bearing exercises was measured using a portable system including a commercial transducer embedded in a short pylon, a laptop and a customized software package. This apparatus was previously shown effective in a proof-of-concept study published by Prof. Frossard. [1-9] The analysis of the static load bearing exercises included an analysis of the reliability as well as the loading compliance. The analysis of the loading reliability showed a high reliability between the loading sessions indicating a correct repetition of the LBE by the participants. [1, 5] The analysis of the loading compliance showed a significant lack of axial compliance leading to a systematic underloading of the long axis of the implant during the proposed experimental static LBE.

ACIAR Strengthening the Fiji Papaya Industry

Strengthening the Fiji Papaya Industry through applied research and information dissemination.

Multi-time scale analysis applied to long time simulation of power systems

The results are presented of applying multi-time scale analysis using the singular perturbation technique for long time simulation of power system problems. A linear system represented in state-space form can be decoupled into slow and fast subsystems. These subsystems can be simulated with different time steps and then recombined to obtain the system response. Simulation results with a two-time scale analysis of a power system show a large saving in computational costs.

Analysis of the distribution of the number of bidders in construction contract auctions

The number of bidders, N, involved in a construction procurement auction is known to have an important effect on the value of the lowest bid and the mark up applied by bidders. In practice, for example, it is important for a bidder to have a good estimate of N when bidding for a current contract. One approach, instigated by Friedman in 1956, is to make such an estimate by statistical analysis and modelling. Since then, however, finding a suitable model for N has been an enduring problem for researchers and, despite intensive research activity in the subsequent thirty years little progress has been made - due principally to the absence of new ideas and perspectives. This paper resumes the debate by checking old assumptions, providing new evidence relating to concomitant variables and proposing a new model. In doing this and in order to assure universality, a novel approach is developed and tested by using a unique set of twelve construction tender databases from four continents. This shows the new model provides a significant advancement on previous versions. Several new research questions are also posed and other approaches identified for future study.

Gene to Phenotype Integrative Science and Modelling Applied to Pioneer elite

This project aims to use simulatiion modelling to improve our understanding of the genetics and physiology of complex traits with a view to increasing the rate of genetic gain in plant breeding programs.

Continued delivery of applied solutions to weed issues in central Queensland

Developing best practices in Central Queensland to (a) manage difficult to control weeds; (b) improve herbicide efficacy under adverse conditions, and (c) manage weeds in wide-row crop systems.