Effects of Fin Parameters on Gas-Side Heat Transfer Performance of H-Type Finned Tube Bundle in a Waste Heat Recovery Boiler

Alfa Laval Aalborg Oy designs and manufactures waste heat recovery systems utilizing extended surfaces. The waste heat recovery boiler considered in this thesis is a water-tube boiler where exhaust gas is used as the convective heat transfer medium and water or steam flowing inside the tubes is subject to cross-flow. This thesis aims to contribute to the design of waste heat recovery boiler unit by developing a numerical model of the H-type finned tube bundle currently used by Alfa Laval Aalborg Oy to evaluate the gas-side heat transfer performance. The main objective is to identify weaknesses and potential areas of development in the current H-type finned tube design. In addition, numerical simulations for a total of 15 cases with varying geometric parameters are conducted to investigate the heat transfer and pressure drop performance dependent on H-type fin geometry. The investigated geometric parameters include fin width and height, fin spacing, and fin thickness. Comparison between single and double tube type configuration is also conducted. Based on the simulation results, the local heat transfer and flow behaviour of the H-type finned tube is presented including boundary layer development between the fins, the formation of recirculation zone behind the tubes, and the local variations of flow velocity and temperature within the tube bundle and on the fin surface. Moreover, an evaluation of the effects of various fin parameters on heat transfer and pressure drop performance of H-type finned tube bundle has been provided. It was concluded that from the studied parameters fin spacing and fin width had the most significant effect on tube bundle performance and the effect of fin thickness was the least important. Furthermore, the results suggested that the heat transfer performance would increase due to enhanced turbulence if the current double tube configuration is replaced with single tube configuration, but further investigation and experimental measurements are required in order to validate the results.

Evaluation of antioxidant activity of agro-industrial waste of acerola (Malpighia emarginata D.C.) fruit extracts

This study was carried out to evaluate the antioxidant capacity of the agro-industrial waste from acerola. Hydroacetone, hydroethanolic, and hydromethanolic extracts were obtained using the sequential extraction process, and they were screened for their free radical DPPH• (1,1-diphenyl-2-picrilhidrazil) and ABTS•+ (2,2'-azino-bis-(3-etilbenzotiazolin 6-sulfonic acid) scavenging activity and their effect on the linoleic acid peroxidation by the ferric thiocyanate method. Soybean oil with the addition of the extracts (200 ppm) was submitted to Schaal oven test (60 °C, 28 days), in which the samples were analyzed for peroxide value and conjugated dienes. Hydroethanolic and hydromethanolic extracts exhibited good DPPH scavenging activity (low value of EC50 and TEC50 and high value of AE), good ABTS scavenging capacity (1445.1 and 1145.5 µMol TEAC.g-1, respectively), and high percentage inhibition of peroxidation of linoleic acid (96.12 and 91.84%, respectively) and showed the ability to retard the formation of peroxides and conjugated dienes.

Consumer preferences of genetically modified foods of vegetal and animal origin in Chile

Given the debate generated by Genetically Modified (GM) foods in developed and developing countries, the aim was to evaluate the importance of determining factors in the preference of consumers in Temuco and Talca in central-southern Chile for GM foods using conjoint analysis and to determine the existence of different market segments using a survey of 800 people. Using conjoint analysis, it was established that, in general, genetic modification was a more important factor than either brand or price in the consumer's decision to purchase either food. Cluster analysis identified three segments: the largest (51.4%) assigned greatest importance to brand and preferred genetically modified milk and tomato sauce; the second group (41.0%) gave greatest importance to the existence of genetic manipulation and preferred non-genetically modified foods; the smallest segment (7.6%) mainly valued price and preferred milk and tomato sauce with no genetic manipulation. The three segments rejected the store brand and preferred to pay less for both foods. The results are discussed based on studies conducted in developed and developing countries.

Microbiological and physicochemical characterization of surimi obtained from waste of piramutaba fillet

The aim of this work was to perform the microbiological and physicochemical characterization of surimi made from waste of piramutaba filleting. The results of physicochemical characterization of the waste and surimi were: moisture (76.37 and 79.11%), total lipids (5.35 and 0.74%), proteins (14.92 and 10.79%), ash (3.03 and 2.35%), pH (6.9 and 7.4), caloric value (109.15 and 77.86 kcal.g-1), and water activity (both 0.98), respectively. The results of the levels of total volatile bases were 7.29 mgN/100-1 g (waste) and 7.01% carbohydrate (surimi). The values of total lipids and proteins were reduced during the preparation of surimi, probably due to successive washes during the processing. Waste and surimi were examined microbiologically and are in compliance with required parameters. The results show a loss of red (a* parameter) and yellow (b* parameter) color. On the other hand, the L* parameter (lightness) increased after the processing of surimi. It can be concluded that piramutaba waste can be used for surimi preparation and as a source of nutrients for human consumption, providing an alternative use of these wastes avoiding their disposal polluting the environment.

Investigation of cytotoxic and mutagenic effects of Malpighia glabra L. (barbados cherry) fruit pulp and vitamin C on plant and animal test systems

Fruits are important sources of nutrients in human diet, and Barbados Cherry (Malpighia glabra L.) is of particular interest due to its high content of antioxidants. Diets rich in fruits and vegetables protect individuals against diseases and cancer, but excessive intake of vitamins may act as pro-oxidant and generate changes in DNA. To evaluate the effect of different in natura (BAN) and frozen (BAF) Barbados Cherry pulp concentrations and synthetic vitamin C in liquid form (VC) on the chromosome level and the cell cycle division, root meristeme cells of Allium cepa L. and bone marrow cells of Wistar rats Rattus norvegicus, were used as test system. In Allium cepa L., BAN, at the highest concentration (0.4 mg.mL-1) and BAF, at the lowest concentration (0.2 mg.mL-1), inhibited cell division, and there was recovery of cell division after the recovery period in water only for BAN. In the Wistar rats, all treatments with Barbados Cherry, either acute or subchronic, were not cytotoxic or mutagenic; only the highest concentration of VC increased significantly the rate of chromosomal abnormalities. The data obtained are important to reinforce the use of Barbados Cherry fruit in the diet.

Isolation and characterization of bacterial strains with a hydrolytic profile with potential use in bioconversion of agroindustial by-products and waste

There is a trend towards the use of novel technologies nowadays, mainly focused on biological processes, for recycling and the efficient utilization of organic residues that can be metabolized by different microorganisms as a source of energy. In the present study the isolation of bacterial strains from six different agro-industrial by-products and waste was performed with the objective of evaluating their hydrolytic capacities and suitability for use in bioconversion of specific substrates. The 34 isolated strains were screened in specific culture media for the production of various hydrolytic enzymes (lipase, protease, cellulase, and amylase). It was found that 28 strains exhibited proteolytic activity, 18 had lipolytic activity, 13 had caseinolytic activity, 15 had amylolytic activity, and 11 strains exhibited cellulolytic activity. The strains that showed the highest hydrolytic capacities with biotechnological potential were selected, characterized genotipically, and identified as Bacillus, Serratia, Enterococcus, Klebsiella, Stenotrophomonas, Lactococcus, and Escherichia genera. It was concluded that the strain isolates have a high potential for use in the bioconversion of agro-industrial waste, both as a pure culture and as a microbial consortium.

Chemical constituents and technological functional properties of acerola (Malpighia emarginata DC.) waste flour

Acerola is a fruit that can be consumed in the form of juice and pulp. However, during its processing, a large amount of waste is generated (seed and bagasse). Adding value to these by-products is of great interest, since their use can enrich foods with nutrients and fiber. In this study, we performed phytochemical screening, determined the proximate and mineral composition, bioactive compounds and the technological functional properties of acerola seed flour and acerola bagasse flour. Seeds were dried in a ventilated oven at ± 45 °C and the bagasse was lyophilized. Samples were ground, stored in flasks protected from light. Phytochemical screening revealed metabolites of nutritional and pharmacological interest and no potentially toxic substances in the flours. Seed flour and bagasse flour showed high levels (g 100 g- 1 of dry matter - DM) of soluble fiber: 4.76 and 8.74; insoluble fiber: 75.76 and 28.58, and phenolic compounds: 4.73 and 10.82, respectively. The flours also showed high absorption of water, oil and emulsion stability, presenting potential for inclusion in meat products and bakery products.

Drying kinetics of potato pulp waste

Potato pulp waste (PPW) drying was investigated under different experimental conditions (temperatures from 50 to 70 °C and air flow from 0.06 to 0.092 m³ m- 2 s- 1) as a possible way to recover the waste generated by potato chip industries and to select the best-fit model to the experimental results of PPW drying. As a criterion to evaluate the fitting of mathematical models, a method based on the sum of the scores assigned to the four evaluated statistical parameters was used: regression coefficient (R²), relative mean error P (%), root mean square error (RMSE), and reduced chi-square (χ²). The results revealed that temperature and air velocity are important parameters to reduce PPW drying time. The models Midilli and Diffusion had the lowest sum values, i.e., with the best fit to the drying data, satisfactorily representing the drying kinetics of PPW.

Characterization of a hydrolyzed oil obtained from fish waste for nutraceutical application

The fish industry generates high volume of waste from fish oil that can have the extraction of its lipids used as nutraceuticals and foods. The objective of this study was to produce unsaturated fatty acids from industrialized fish oil by means of a differentiated hydrolysis process. The samples used were crude fish oil obtained from Campestre industry and characterized through physical-chemical parameters, according to AOCS: acidity, peroxide, saponification, iodine and percentage of free fatty acids and also obtained the fatty acid profile through derivatization method for gas chromatography. The results obtained for the oleochemical indices for refined oil were similar to the data found on the literature. The content of polyunsaturated fatty acids (PUFA) was found of 32,78%, with 9,12% of docosahexaenoic (DHA) and 10,36% of eicosapentaenoic (EPA), regarding monounsaturated fatty acids (MUFA) content was of 30,59% in the hydrolyzed fish oil in relation to refined (20,06%). Thus, it can be concluded that the hydrolysis process used for oils from fish-waste was satisfactory on the production of absolute yield of lipids in the process and significant preservation on the percentages of EPA and DHA, interesting on the production of nutraceuticals and nutrition of aquatic animals, including shrimp in captivity.

Acceptance of a food of animal origin obtained through genetic modification and cloning in South America: a comparative study among university students and working adults

AbstractWith the aim of comparing the acceptance of milk obtained from cloned, genetically modified (GM) and conventionally bred cows among working adults and university students, and identifying and characterizing typologies among both subsamples in terms of their preferences, a survey was applied to 400 people in southern Chile, distributed using a simple allocation among the subsamples. Using a conjoint analysis, it was found that consumers preferred milk from a conventional cow. Using a cluster analysis, in both subsamples two segments sensitive to production technology were identified. Rejection of cloning was greatest among university students, whereas a higher proportion of working adults rejected GM. The segments differed in terms of area of residence, knowledge about GM, and milk consumption habits. Contrary to what was expected, no differences were found according to education, gender or degree of satisfaction with food-related life.

Effect of incorporation of nutraceutical capsule waste of safflower oil in the mechanical characteristics of corn starch films

Abstract Biodegradable films blends made of safflower oil nutraceutical capsules waste corn starch (20:4, 30:4, 40:4 and 50:4) were prepared. The objective of this study was to evaluate the influence of addition of different concentrations of safflower oil nutraceutical capsule waste in the mechanical properties (tensile strength, elongation at break, Young’s modulus) and thickness of corn starch films. A decrease in tensile strength and Young’s modulus and an increase in elongation at break were observed with the increase in the content of the nutraceutical capsule waste. The results showed that the blends of safflower oil capsules waste-corn starch films demonstrated promising characteristics to form biodegradable films with different mechanical characteristics.

Indução de resposta inflamatória sistêmica e espessamento de artérias subepicárdicas em um modelo animal de uremia

A disfunção renal é um fator de risco para doença cardiovascular (DCV). Estudos experimentais controlados que possam analisar o impacto da disfunção renal no sistema cardiovascular, isolando esses fatores relacionados à uremia dos fatores de risco tradicionais, que são altamente prevalentes na população com doença renal crônica (DRC), ainda são escassos. OBJETIVO: Analisar o impacto cardiovascular em ratos com disfunção renal, analisando biomarcadores de risco cardiovascular e a histologia das artérias subepicárdicas desses animais. MÉTODOS: Estudo experimental envolvendo trinta ratos machos Wistar, divididos em dois grupos. Um grupo foi submetido à ablação renal e o outro grupo SHAM (grupo controle) à manipulação do pedículo renal. Ambos os grupos foram acompanhados por oito semanas, período em que foram feitas dosagens de ureia, fósforo e do fator de necrose tumoral alfa (TNF-α). Lâminas obtidas de cortes do miocárdio foram confeccionadas para análise das características das arteríolas subepicárdicas. RESULTADOS: O grupo DRC apresentou níveis elevados de uréia e fósforo em relação ao grupo SHAM. Já os níveis de TNF-α, em todas as análises, foram indetectáveis nos animais do grupo SHAM, em contraste com o grupo DRC, onde se observaram elevados níveis de TNF-α (p < 0,05). A espessura da camada média dos vasos subepicárdicos do grupo DRC foi significativamente maior do que em relação ao grupo SHAM (p = 0,011). CONCLUSÃO: A indução de disfunção renal determinou alterações em biomarcadores de risco cardiovascular e um aumento na espessura dos vasos subepicárdicos estudados em comparação aos animais com função renal normal.

Potential of energy and nutrient recovery from biodegradable waste by co-treatment in Lithuania

Biodegradable waste quantities in Lithuania and their potential for the co-treatment in renewable energy and organic fertilizer production are investigated. Two scenarios are formulated to study the differences of the amounts of obtainable energy and fertilizers between different ways of utilization. In the first scenario, only digestion is used, and in the second scenario, other materials than straw are digested, and straw and the solid fraction of sewage sludge digestate are combusted. As a result, the amounts of heat and electricity, as well as the fertilizer amounts in the counties are obtained for both scenarios. Based on this study, the share of renewable energy in Lithuania could be doubled by the co-treatment of different biodegradable materials.

Animal Experience in Kant’s Philosophy

The role of animals in the philosophy of mind is primarily to help understand the human mind by serving as practical examples of cognition that differs from ours either in kind or in degree. Kant regarded animals as beings that only have the faculty of sensibility. By examining what Kant writes about animal experience we gain knowledge concerning the role of sensibility in experience, free from the influence of understanding and reason. I look at Kant’s view of animals in the historical context of alternative views presented by Descartes’ and Hume’s views. Kant’s view can be seen as a counterargument against Descartes’ doctrine of animal machines according to which animals do not have minds and they do not think. I suggest that while it can be argued that some kind of elementary experience could be possible in the physiological level, this only makes sense when it is possible to become conscious of the unconscious sensation, and this requires a mind. A further option is to claim that there is only a difference in degree between human and animal cognitive capacities. This is Hume’s view. I argue that even though Kant’s and Hume’s view on the cognitive capacities of animals seems to depart from each other to a considerable extent, the differences between them diminish when the focus is on the experience these capacities enable. I also briefly discuss the relation of the metaphysics of animal minds to animal ethics.