Desenvolvimento e teste de um modelo estatístico de identificação das proporções de água produzida em zonas de produção de um campo maduro de petróleo

This study investigates the chemical species produced water from the reservoir areas of oil production in the field of Monte Alegre (onshore production) with a proposal of developing a model applied to the identification of the water produced in different zones or groups of zones.Starting from the concentrations of anions and cátions from water produced as input parameters in Linear Discriminate Analysis, it was possible to estimate and compare the model predictions respecting the particularities of their methods in order to ascertain which one would be most appropriate. The methods Resubstitution, Holdout Method and Lachenbruch were used for adjustment and general evaluation of the built models. Of the estimated models for Wells producing water for a single production area, the most suitable method was the "Holdout Method and had a hit rate of 90%. Discriminant functions (CV1, CV2 and CV3) estimated in this model were used to modeling new functions for samples ofartificial mixtures of produced water (producedin our laboratory) and samples of mixtures actualproduced water (water collected inwellsproducingmore thanonezone).The experiment with these mixtures was carried out according to a schedule experimental mixtures simplex type-centroid also was simulated in which the presence of water from steam injectionin these tanks fora part of amostras. Using graphs of two and three dimensions was possible to estimate the proportion of water in the production area

Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology

Multicast packing problem: abordagem multiobjetivo

This work presents a algorithmic study of Multicast Packing Problem considering a multiobjective approach. The first step realized was an extensive review about the problem. This review serverd as a reference point for the definition of the multiobjective mathematical model. Then, the instances used in the experimentation process were defined, this instances were created based on the main caracteristics from literature. Since both mathematical model and the instances were definined, then several algoritms were created. The algorithms were based on the classical approaches to multiobjective optimization: NSGA2 (3 versions), SPEA2 (3 versions). In addition, the GRASP procedures were adapted to work with multiples objectives, two vesions were created. These algorithms were composed by three recombination operators(C1, C2 e C3), two operator for build solution, a mutation operator and a local search procedure. Finally, a long experimentation process was performed. This process has three stages: the first consisted of adjusting the parameters; the second was perfomed to indentify the best version for each algorithm. After, the best versions for each algorithm were compared in order to identify the best algorithm among all. The algorithms were evaluated based on quality indicators and Hypervolume Multiplicative Epsilon

Movimentos sociais e transformação societária: concepções teóricas presentes na tradição marxista

Este ensaio tem como objetivo discutir premissas de análise da temática movimentos sociais e transformação societária presentes na formulação marxista. Para tanto, retoma o pensamento de autores clássicos, em especial, Lênin, Rosa Luxemburgo e Gramsci. Destaca, com base nesses autores, as determinações fundamentais para a análise das lutas sociais da classe trabalhadora, enfatizando a teoria da organização, a ampla participação das massas e a construção de uma nova hegemonia

Gestão por Competências em Organizações Públicas: O Processo de Transformação Organizacional e seus Impactos Junto aos Servidores na Secretaria Estadual de Administração e Recursos Humanos (SEARH/RN)

The state has changed over time in order to meet a society with increasingly stringent demands. Techniques of private means begin to be employed in an attempt to overcome the dysfunctions entrenched bureaucracy, making the machine faster. By federal law by the People Management Skills was established as a reference for the administration of Human Resources of the public sector in an attempt to develop professionally servers, based mainly on the three pillars of the model: the knowledge, skills and attitudes. This thesis aims at understanding, in the view of employees, the perceived impacts on the organizational changes occurring in the Department of Administration and Human Resources of the State of Rio Grande do Norte in order to implement a People Management Skills-based. It is a simple case study, characterized by the research during a certain period of time, collecting data in a real environment of an organization, in this case SEARH/RN. The procedures used in collecting data were the literature review, documental research and field research. We used a qualitative approach with exploratory and descriptive approach. Every reform was implemented in the institution and reported from there analyzed the impacts observed by the servers. As a result we observed a considerable advance in institutional activities, mainly relating to physical structure / organizational and human resource policies, with minor advances on labor policies, in much the result of the guiding focus of the reform on SEARH/RN. The impacts in total were more positive than negative and direct paths to improvement in public organizations. Making a general analysis of the modernization program implemented in SEARH/RN, we can conclude that there was a distinct change in all dimensions studied, mostly pointing out positive aspects, and contrary to the opinion of some authors, who claim to be very difficult to implement reforms in public organizations, since they are highly institutionalized environments. What was found was a big organization, with gaps and weaknesses, but with a much larger number of hits and recognition from institutional actors

Parâmetros urbanísticos para habitação de interesse social: uma análise crítica para as Rocas em Natal/RN

Through the comparative critical analysis of the demanded urbanistic parameters in the legislation and of the urbanistic index found in the Rocas neighbourhood, having as study object the already consolidated constructions of residential use, intended to demonstrate that the neighbourhood needes specific norms and that the limits established for recognition of Special Areas of Social Interest for the urbanistic legislation of the City of Natal would have to be reviewed and to be brought up to date, once they show occupations like the ones of the reffered neighbourhood. At a first moment, bibliographical revision and elaboration of the theoretical referencial had been made, , to analyze afterwards the urbanistic legislation for the neibourhood of Rocas, that determines relative parameters for the sizes of land lots, coefficients of exploitation, minimum taxes of occupation and retreat. Through a field research in the area, a study on the occupation description was done at first, characterization of the neibourhood through the study of the social-economic aspects, of the existing infrastructure in the place, environmental aspects, morphologic and tipolgic analysis of the neibourhood as a whole. From the grouping of the found characteristics, sub-zones had been delimited, where the real object of study was detached to be analyzed. From the Sub-zoning, a statistic sampling was carried through with the intention to examine which of the urbanistic index is found in the dwellings of that already materialized place. This sampling, of one hundred and eighteen residences, was carried through by measurement of the lots and existing constructions in these places. Through this survey, for each habitacional unit, area of the lot, constructed area, retreats and coefficient of exploitation had been calculated. The comparison between the legislation parameters and the index found in the place reveal an expressive index of urbanistic irregularity and the necessity of special regulation for the Rocas neibourhood due to its specific social-space characteristic

Monitoramento de parâmetros laboratoriais em gatos sem raça definida durante o período neonatal

O objetivo do presente estudo foi à monitoração dos parâmetros laboratoriais como hemograma, enzimas hepáticas alanina aminotransferase (ALT) e gama-glutamiltransferase (GGT), glicemia e proteinograma sérico, e avaliar o efeito da idade em gatos sem raça definida durante a fase neonatal. Vinte gatos machos e fêmeas foram utilizados a partir do terceiro dia de vida até o 38º dia de idade. As amostras de sangue foram colhidas semanalmente e as análises laboratoriais (hemograma, enzimas hepáticas, glicemia e proteinograma sérico) realizadas no 3º, 10º, 17º, 24º, 31º e 38º dia de idade. Os resultados exibiram efeito significativo da idade sobre a contagem total de eritrócitos, concentração de hemoglobina, volume globular, volume corpuscular médio, concentração de hemoglobina corpuscular média, leucócitos totais, neutrófilos, eosinófilos e basófilos. Nenhum efeito foi observado em células como linfócitos, monócitos ou na concentração sérica de glicose. A análise das modificações ocorridas nos parâmetros laboratoriais durante a fase neonatal reflete o desenvolvimento fisiológico do filhote e contribui para o conhecimento do processo adaptativo em gatos neonatos durante o primeiro mês de vida, sendo útil para a avaliação clínica, diagnóstico e tratamento das doenças neonatais.

Efeito do sítio de venopunção nos parâmetros hematológicos em tigre-d'água-americano, Trachemys scripta elegans

O objetivo do presente estudo foi realizar a comparação entre dois sítios de coleta sanguínea em 24 exemplares de tigre-d'água-americano (Trachemys scripta elegans) oriundos de um criadouro comercial, localizado no município de Antonina, litoral do Paraná, Brasil. Os animais foram submetidos a contenção física e as venopunções foram realizadas no seio supraocciptal e na veia coccígea dorsal. As amostras heparinizadas foram identificadas e refrigeradas para posterior análise laboratorial. A contagem total de eritrócitos e leucócitos foi realizada pela técnica de hemocitometria. O hematócrito (Ht) e a hemoglobina (Hb) foram determinados pelo método de microhematócrito e cianometahemoglobina, respectivamente. A proteína plasmática total (PPT) foi determinada por refratometria e a contagem diferencial de leucócitos foi realizada através da técnica de Shilling. Houve diferença significativa no número de leucócitos e no valor da proteína plasmática total, e em ambos os casos os valores encontrados nas amostras provenientes da veia coccígea dorsal foram inferiores. A diferença encontrada no número de leucócitos provavelmente foi devido à contaminação por linfa, que também justifica o menor valor na concentração da proteína plasmática total. Conclui-se que é mais indicada a venopunção no seio supraocciptal quando comparado a veia coccígea dorsal.

Dinâmica populacional do caranguejo-uçá, Ucides cordatus (Linnaeus, 1763) (CRUSTACEA, BRACHYURA, UCIDIDAE) no município de Porto do Mangue, litoral norte do estado do Rio Grande do Norte

Decapod crustaceans are one of the most important portions of megafaunal of coastal waters, playing a role as modifier of the environment and controlling populations of other organisms. Among the Decapoda, crab (brachyuran) constitutes the dominant macrofauna of mangroves. Among brachyuran is the mangrove crab (Ucides cordatus, Linnaeus, 1763), which represents the main component of the macrofauna of mangroves, particularly in Northern and Northeastern Brazil. In Brazil, its distribution is known from the state of Amapá to the north of Santa Catarina. This species is distinguished by its economic importance, being one of the main fishing resources in Brazil, generating a significant impact on their natural populations. This reduction would result in loss of value to the product, preventing its commercialization. Although it´s great ecological and economic importance, there are few articles about the biological aspects of U. cordatus, mainly in the state of Rio Grande do Norte. This work aimed to study the population dynamics of the mangrove crab, Ucides cordatus (Linnaeus, 1763), in Conchas estuary, Porto do Mangue, northern coast of Rio Grande do Norte. During the period November 2009 to October 2010 the crabs were collected monthly, obeying predetermined lunar periods (new moon or full moon) in a mangrove area in Porto do Mangue - RN. With the aid of a steel caliper (0.01 mm) and a precision balance (0.01 g) were measured biometric variables related to the animal's carapace, major propodus chela, width of abdomen (female), length of gonopodium ( males) and total weight. In addition, it was recorded, the gonads and molt stages, for males and females. In total, 476 crabs were collected, with 338 males and 138 females. Males were larger, heavier and in greater proportion than females. The reproductive period for the species in this location was limited during the months November to May, suggesting a change in current environmental legislation for the closure period. Synchrony was observed between the morphological and physiological maturity with females maturing earlier, possibly, a reproductive strategy adopted, compared to the low fishing pressure in the area. The molting period occurred in the dry season peaking in October. The analysis of growth, based on the parameters of von Bertalanffy was calculated using the nonlinear fit using modes (AJMOD). High growth rates for both males (L = 7.54 cm, k = 0.95, t0 =- 00:08; tmax = 4.84) and females (L = 6.50, k = 1 , 2, t0 =- 0008; tmax = 3.28) were found, contrasting with data from the literature, using other techniques. Males had higher asymptotic width size and longevity, but a lower growth constant when compared with females. The estimated age, for males and females, reaching the minimum capture size was 1.82 years and 1.63 years respectively. The size of physiological maturity, when individuals are able to reproduce, was estimated at 1.4 years and 1.05 years, for males and females, respectively. The recruitment period for this species is seasonal, with two peaks of occurrence, one in the rainy season and one in the dry season. This work represented the first effort on understanding the ecology of the mangrove crab, to the northern coast of Rio Grande do Norte. However, further studies on its biology should be undertaken, especially those related to growth, and recruitment, where observed that literature is more scarce

Localização de faltas em linhas de transmissão usando morfologia matemática

This work an algorithm for fault location is proposed. It contains the following functions: fault detection, fault classification and fault location. Mathematical Morphology is used to process currents obtained in the monitored terminals. Unlike Fourier and Wavelet transforms that are usually applied to fault location, the Mathematical Morphology is a non-linear operation that uses only basic operation (sum, subtraction, maximum and minimum). Thus, Mathematical Morphology is computationally very efficient. For detection and classification functions, the Morphological Wavelet was used. On fault location module the Multiresolution Morphological Gradient was used to detect the traveling waves and their polarities. Hence, recorded the arrival in the two first traveling waves incident at the measured terminal and knowing the velocity of propagation, pinpoint the fault location can be estimated. The algorithm was applied in a 440 kV power transmission system, simulated on ATP. Several fault conditions where studied and the following parameters were evaluated: fault location, fault type, fault resistance, fault inception angle, noise level and sampling rate. The results show that the application of Mathematical Morphology in faults location is very promising

Relevância do estado de hidratação na interpretação de parâmetros nutricionais em diálise peritoneal

OBJETIVO: Identificar determinantes do estado de hidratação de pacientes em diálise peritoneal crônica, bem como investigar os efeitos da sobrecarga líquida sobre o estado nutricional. MÉTODOS: Foi feito estudo transversal, realizado em 2006, avaliando 27 pacientes em diálise peritoneal crônica, acompanhados no Hospital das Clínicas da Faculdade de Medicina de Botucatu (SP), quanto a parâmetros clínicos, dialíticos, laboratoriais, antropométricos e de bioimpedância elétrica. Para avaliar a influência de parâmetros sobre o estado de hidratação empregou-se modelo de regressão linear múltipla. A amostra foi estratificada quanto ao estado de hidratação pela relação entre água extracelular e água corporal total (0,47 para homens e 0,52 para mulheres), parâmetros obtidos por meio de bioimpedância elétrica. Comparações foram realizadas por análise de covariância, Mann-Whitney, Qui-quadrado ou teste exato de Fisher. Considerou-se significância estatística quando p≤0,05. RESULTADOS: Pacientes com maior volume urinário e em modalidade dialítica automatizada apresentaram melhor estado de hidratação. Pacientes com maior sobrecarga líquida, comparados àqueles com menor sobrecarga, apresentaram menor ângulo de fase (M=4,2, DP=0,9 vs M=5,7, DP=0,7º; p=0,006), menor albumina (M=3,06, DP=0,46 vs M=3,55, DP=0,52g/dL; p=0,05) e maior % prega cutânea tricipital (M=75,3, DP=36,9 vs M=92,1, DP=56,9%; p=0,058), sem outras evidências antropométricas. CONCLUSÃO: Pode-se sugerir que os níveis reduzidos de albumina e ângulo de fase nos pacientes com maior sobrecarga líquida não estiveram relacionados a pior estado nutricional. Para o diagnóstico nutricional em vigência de sobrecarga líquida, deve-se considerar o conjunto de variáveis obtidas por diversos métodos, buscando relacioná-las e interpretá-las de maneira abrangente, possibilitando um diagnóstico nutricional fidedigno.

Parâmetros físico-químicos de estrelas com planetas na missão CoRoT

In the present study we compute the atmospheric parameters (Teff , log g and vmic, [Fe/H]) and chemical abundance of 16 ions (Fe I, Fe II, O I, Si I, Na I, Mg I, Al I, Ca I, Ti I, Co I, Ni I, Rb I, Zr I, Ba II, La II and Cr I) for 16 solar-like stars with masses between 0:8 and 1:2 Mfi aproximatedly, including 10 planet-host stars detected by the CoRoT Space Mission. For this study, we use data from the ESO public archive: (i) high resolution spectra (R 47000) from the UVES spectrograph on the VLT/UT2-ESO (for 7 stars, covering the wavelength range 3450-4515 Å and 5500-9400 Å) and (ii) high resolution spectra from HARPS spectrograph on the La Silla-ESO 3.60 m telescope (for 9 stars, covering the wavelength range 4200-6865 Å). Our spectral analysis is based on MARCS models of atmosphere and Turbospectrum spectroscopic tools. On the base of the computed parameters, the referred abundances appears to follow the same behavior of the solar curve abundances. Further, one observes a signifficant correlation between the abundance ratio [m/Fe] and condensation temperature (Tc) of refractory elements (Tc > 900 K). The behavior of the projected rotational velocity (v sin i) versus the computed abundances [m/Fe] is also analyzed, presenting no clear trends. This study oers additional constraints to trace the evolutive history of solar-like stars with planets, including the search for chemical dierences between stars with and without transit planets and anomalies in the studied abundances

Propriedades estruturais e optoeletrônicas dos compostos SrSnO3, SrxBa1-xSnO3 e BaSnO3

In this work we present a study for the structural, electronic and optical properties, at ambient conditions of SrSnO3, SrxBa1

Controle on-line para o número de não-conformidades em um ítem inspecionado

The on-line processes control for attributes consists of inspecting a single item at every m produced ones. If the examined item is conforming, the production continues; otherwise, the process stops for adjustment. However, in many practical situations, the interest consist of monitoring the number of non-conformities among the examined items. In this case, if the number of non-conformities is higher than an upper control limit, the process needs to be stopped and some adjustment is required. The contribution of this paper is to propose a control system for the number of nonconforming of the inspected item. Employing properties of an ergodic Markov chain, an expression for the expected cost per item of the control system was obtained and it will be minimized by two parameters: the sampling interval and the upper limit control of the non-conformities of the examined item. Numerical examples illustrate the proposed procedure

Avaliação de parâmetros métricos oculares pela fotografia digital da face: uso do diâmetro da íris como unidade de referência

Purpose: To evaluate reproducibility and precision of ocular measurements by digital photograph analysis, in addition to the transformation of the measures according to the individual iris diameter as an oculometric reference. Methods: Twenty-four eyes have been digitally photographed in a standardized way at two distances. Two researchers have analyzed these printed images using a caliper and these digital forms by ImageJ 1.37 (TM). Several external ocular parameters were estimated (mm and as iris diameter) and methods of measurement compared regarding their precision, agreement and correlation. Results: Caliper and digital analysis of oculometric measures provided significant agreement and correlation, nevertheless the precision of digital measures was higher. The estimates of numeric transformation from oculometric measures according to individual iris diameter resulted in great correlation to caliper measures and high agreement when compared to different distances of taking the photographs. Conclusions: Facial digital photographs allowed oculometric precise and reproducible estimates, endorsing clinical research usefulness. Using iris diameter as individual oculometric reference disclosed high reproducibility when facial photographs were taken at different distances.