O Projeto P.l.R.A.T.A.-C.B.

O presente texto corresponde ao capítulo XIII do livro em apreço, redigido em co-autoria com colegas da Universidade dos Açores, no qual se apresentam alguns dos resultados do estudo realizado em torno da cultura do brincar nos Açores.

Lire un blog : L'Autofictif d'Eric Chevillard

Artigo também disponível no PROA-UA: plataforma de revistas em open access da universidade de aveiro com o URI http://revistas.ua.pt/index.php/Carnets/article/view/436/397.

Éric Chevillard : des soucis esthétiques a l'engagement écologique

Artigo também disponível no PROA-UA: plataforma de revistas em open access da universidade de aveiro com o URI http://revistas.ua.pt/index.php/Carnets/article/view/768/695.

Une quête d'identité par le détour : «Dans ces bras-là», de Camille Laurens

L'articulation savante entre éléments autobiographiques, fiction et détournement de conventions sont caractéristiques du travail de Camille Laurens. Dans ces bras-là (2000) peut être décrit comme une quête d'identité par le détour de l'autre. En effet, le roman s'organise autour des trois rapports dichotomiques autobiographie-fiction, femme-homme et écriture-langage oral. Le résultat en est un regard complexe et profond sur l'identité de Camille Laurens qui est ici une femme, un auteur, mais aussi la narratrice d'un récit.

Traduire l’étranger De Mau Tempo no Canal à Gros Temps sur L'archipel

Initialement présentée au Colloque international APEF / APFUE / SHF: L'Étranger. Université de l'Algarve.

Fin de partie: l'infini recommencement de rien

Dans Fin de partie, Beckett se révèle de nouveau un maître du théâtre de l’âme, mais d’une façon pas du tout conventionnelle. On doit classer cette pièce dans l’antithéâtre parce qu’elle manque d’intrigue, il n’y a que de situations cycliques toujours répétées, le temps ne veut pas passer, c’est plutôt un moment éternel, les personnages manquent de consistance et d’individualité : ils sont davantage des incarnations d’attitudes humaines, et ils parlent un langage décousu, un bourdonnement dépourvu de sens. Bien que tous ces aspects contribuent à l’ambiguïté de la pièce, rien n’y est laissé au hasard : tout sert à communiquer l’incommunicable. La scène se passe dans un lieu clos, avec une lumière crépusculaire qui suggère la fin du jour. Les personnages et les objets se trouvent dans des poubelles (Nagg et Nell) ou couverts par des draps : peu à peu, les objets et les personnages se dévoilent d’une façon fragmentée. C’est Clov qui nous dit qu’il s’agit de la fin de quelque chose, mais déjà le décor, la lumière, la déchéance physique des personnages et les dialogues à peine esquissés suggèrent un stage final qui n’en finit plus, qui devient un moment éternel, car la mort, elle non plus, ne se présente pas comme une solution pour le problème de notre existence absurde. Et nous voilà de nouveau face à face avec l’absurdité de la condition humaine, où l’homme se sent privé de toute certitude et incapable de découvrir un sens à son existence. Le tragique de la condition humaine, et le désir de lui mettre fin est le fil conducteur de Fin de partie. Les personnages montrent tout au long de la pièce que la condition humaine est intolérable et qu’ils sont écrasés par la routine et l’ennui. Ils se sentent perdus et abandonnés par un dieu quiconque, un monstre qui a créé la nature humaine. La vie est une pile de moments infernaux ; tout le monde est dans l’attente de quelqu’un ou d’un événement qui puisse changer son cours. Mais rien ne change, les personnages sont trop passifs – Clov se prépare pour son voyage, cependant, au lieu de partir, il reste là, immobile, jusqu’à la fin. Mais c’est juste pour ce danger que Beckett veut nous alerter : si nous ne faisons pas usage de notre liberté en nous recréant par une succession de choix, nous serons damnés, c’est-à-dire, condamnés à vivre dans le désespoir, le néant, l’absurde – la vie sera toujours un infini recommencement de rien.

Monitorização de cobre em vinhos verdes

A presente dissertação descreve o desenvolvimento e a caracterização de sensores potenciométricos com base em polímeros de impressão molecular e de sensores ópticos com base em membranas de poli(cloreto de vinilo), PVC, para a determinação de cobre em vinhos verdes. Os sensores potenciométricos foram preparados a partir de diferentes solventes (metanol e clorofórmio), tendo o seu crescimento decorrido na presença ou ausência da molécula molde (cobre). Os sistemas sensores selectivos ao cobre continham partículas de polímeros com ou sem impressão molecular como material electroactivo, dispersas em solvente plastificante, PVC e, em alguns casos, aditivo aniónico. A avaliação dos vários sistemas baseou-se na comparação das características operacionais dos diversos eléctrodos onde foram aplicados. Estas características foram obtidas a partir de curvas de calibração, cujos declives e limites de detecção variaram entre -39,9 – 37,0 mV decada-1 e 4,2 – 29,1 μg mL-1, respectivamente. Os sensores não são independentes do pH uma vez que o complexo formado entre o cobre e a difenilcarbazida é favorecido por valores de pH próximos de 5. Assim, obtiveram-se melhores resultados usando água desionizada ou solução tampão de HEPES revelando-se um método rápido e relativamente eficaz nestas condições. Os sensores ópticos basearam-se na reacção colorimétrica entre o cobre e um complexante. Os reagentes complexantes escolhidos foram a neocuproína, a difenilcarbazida e o dietilditiocarbamato de sódio. Avaliou-se o efeito de vários parâmetros experimentais na resposta destes sensores, tais como o pH (avaliado para os valores 3,00 e 5,00), a concentração de cobre (que variou entre 0,06 e 317,7 mg L- 1) e as próprias características da membrana. Os melhores resultados foram obtidos a pH 3, numa gama de concentrações de 0,06 e 31,8 mg L-1 usando a difenilcarbazida como reagente complexante. A aplicação destes sensores a vinhos requer ainda estudos adicionais, especialmente no que diz respeito à necessidade de implementar algum procedimento de pré-tratamento de amostra.

Simultaneous distillation–extraction of high-value volatile compounds from Cistus ladanifer L.

The present paper describes a procedure to isolate volatiles from rock-rose (Cistus ladanifer L.) using simultaneous distillation–extraction (SDE). High-value volatile compounds (HVVC) were selected and the influence of the extraction conditions investigated. The effect of the solvent nature and extraction time on SDE efficiency was studied. The best performance was achieved with pentane in 1 h operation. The extraction efficiencies ranged from 65% to 85% and the repeatability varied between 4% and 6% (as a CV%). The C. ladanifer SDE extracts were analysed by headspace solid phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The HS-SPME sampling conditions such as fiber coating, temperature, ionic strength and exposure time were optimized. The best results were achieved with an 85 µm polyacrylate fiber for a 60 min headspace extraction at 40ºC with 20% (w/v) of NaCl. For optimized conditions the recovery was in average higher than 90% for all compounds and the intermediate precision ranged from 4 to 9% (as CV %). The volatiles α-pinene (22.2 mg g−1 of extract), 2,2,6-trimethylcyclohexanone (6.1 mg g−1 of extract), borneol (3.0 mg g−1 of extract) and bornyl acetate (3.9 mg g−1 of extract) were identified in the SDE extracts obtained from the fresh plant material.

Lá contribution des technologies a l'apprentissage du français à l'ecole primaire georgienne

Les méthodes modernes d’enseignement exigent de recréer le milieu de la langue étudiée, de faire parler les élèves dans des situations différentes. En Géorgie, l’enseignement de la langue étrangère s’effectue à partir de 6 ans, en même temps que celui de la langue maternelle. Les élèves apprennent à écrire en français après l’apprentissage de l’écriture en géorgien. A l’âge de 7-10 ans, ils connaissent déjà 3 alphabets différents : le géorgien, le latin et le cyrillique. L’objectif de cet article est de proposer une méthode qui pourra faciliter l’apprentissage du français aux non francophones grâce aux moyens audiovisuels qui sont très efficaces surtout au moment quand l’enfant ne sait ni lire, ni écrire en langue étrangère. Cependant, les moyens audiovisuels doivent être utilisés à des doses normales sans empêcher l’activité de l’élève.

Chlormequat selective electrodes: construction, evaluation and application at FIA systems

A flow injection analysis (FIA) system having a chlormequat selective electrode is proposed. Several electrodes with poly(vinyl chloride) based membranes were constructed for this purpose. Comparative characterization suggestedthe use of membrane with chlormequat tetraphenylborate and dibutylphthalate. On a single-line FIA set-up, operating with 1x10-2 mol L-1 ionic strength and 6.3 pH, calibration curves presented slopes of 53.6±0.4mV decade-1 within 5.0x10-6 and1.0x10-3 mol L-1, andsquaredcorrelation coefficients >0.9953. The detection limit was 2.2x10-6 mol L-1 and the repeatability equal to ±0.68mV (0.7%). A dual-channel FIA manifold was therefore constructed, enabling automatic attainment of previous ionic strength andpH conditions and thus eliminating sample preparation steps. Slopes of 45.5±0.2mV decade -1 along a concentration range of 8.0x10-6 to 1.0x10-3 mol L-1 with a repeatability ±0.4mV (0.69%) were obtained. Analyses of real samples were performed, and recovery gave results ranging from 96.6 to 101.1%.

Flow injection potentiometric determination of chlorpromazine

New chlorpromazine selective electrodes with a tubular arrangement and no internal reference solution are proposed. Selective membranes are of poly(vinyl chloride) (PVC) with the tetraphenylborate•chlorpromazine (TPB•CPZ) ion-exchanger dissolved in o-nitrophenyl octyl ether (oNPOE). Analytical features of the electrodes were evaluated on a single-channel flow assembly having 500 µl injection volumes and flow-rates of 4.5 ml min−1. For a carrier solution of 3.3×10−3Min sodium sulphate, Nernstian responsewas observed over the concentration range 1.0×10−5 to 1.0×10−2 M. Average slopes were about 59mVdecade−1 and squared correlation coefficients were >0.9984. Slight hiper-Nernstian behaviour was observed in buffer solutions of 4.4 pH; average slopes were of 62.06mVdecade−1. The electrode displayed a good selectivity for CPZ, with respect to, several foreign inorganic and organic species. The selective electrodes were successfully applied to the analysis of pure solutions and pharmaceutical preparations. Proposed method allows the analysis of 84 samples h−1, producing wastewaters of low toxicity. The proposed method offers the advantage of simplicity, accuracy, applicability to coloured and turbid samples, and automation feasibility.

Ciprofloxacin-imprinted polymeric receptors as ionophores for potentiometric transduction

A 3D-mirror synthetic receptor for ciprofloxacin host–guest interactions and potentiometric transduction is presented. The host cavity was shaped on a polymeric surface assembled with methacrylic acid or 2-vinyl pyridine monomers by radical polymerization. Molecularly imprinted particles were dispersed in 2-nitrophenyl octyl ether and entrapped in a poly(vinyl chloride) matrix. The sensors exhibited a near-Nernstian response in steady state evaluations. Slopes and detection limits ranged from 26.8 to 50.0mVdecade−1 and 1.0×10−5 to 2.7×10−5 mol L−1, respectively. Good selectivity was observed for trimethoprim, enrofloxacin, tetracycline, cysteine, galactose, hydroxylamine, creatinine, ammonium chloride, sucrose, glucose, sulphamerazine and sulfadiazine. The sensors were successfully applied to the determination of ciprofloxacin concentrations in fish and in pharmaceuticals. The method presented offered the advantages of simplicity, accuracy, applicability to colored and turbid samples and automation feasibility, as well as confirming the use of molecularly imprinted polymers as ionophores for organic ion recognition in potentiometric transduction.

Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials

The indiscriminate use of antibiotics in foodproducing animals has received increasing attention as a contributory factor in the international emergence of antibiotic- resistant bacteria (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004). Numerous analytical methods for quantifying antibacterial residues in edible animal products have been developed over years (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004; Botsoglou and Fletouris in Handbook of food analysis, residues and other food component analysis, Marcel Dekker, Ghent, 2004). Being Amoxicillin (AMOX) one of those critical veterinary drugs, efforts have been made to develop simple and expeditious methods for its control in food samples. In literature, only one AMOX-selective electrode has been reported so far. In that work, phosphotungstate:amoxycillinium ion exchanger was used as electroactive material (Shoukry et al. in Electroanalysis 6:914–917, 1994). Designing new materials based on molecularly imprinted polymers (MIPs) which are complementary to the size and charge of AMOX could lead to very selective interactions, thus enhancing the selectivity of the sensing unit. AMOXselective electrodes used imprinted polymers as electroactive materials having AMOX as target molecule to design a biomimetic imprinted cavity. Poly(vinyl chloride), sensors of methacrylic acid displayed Nernstian slopes (60.7 mV/decade) and low detection limits (2.9×10-5 mol/L). The potentiometric responses were not affected by pH within 4–5 and showed good selectivity. The electrodes were applied successfully to the analysis of real samples.

Biomimetic sensors of molecularly-imprinted polymers for chlorpromazine determination

A new man-tailored biomimetic sensor for Chlorpromazine host-guest interactions and potentiometric transduction is presented. The artificial host was imprinted within methacrylic acid, 2-vinyl pyridine and 2-acrylamido-2-methyl-1-propanesulfonic acid based polymers. Molecularly imprinted particles were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. Slopes and detection limits ranged 51–67 mV/decade and 0.46–3.9 μg/mL, respectively, in steady state conditions. Sensors were independent fromthe pHof test solutionswithin 2.0–5.5.Good selectivitywas observed towards oxytetracycline, doxytetracycline, ciprofloxacin, enrofloxacin, nalidixic acid, sulfadiazine, trimethoprim, glycine, hydroxylamine, cysteine and creatinine. Analytical features in flowing media were evaluated on a double-channel manifold, with a carrier solution of 5.0×10−2 mol/L phosphate buffer. Near-Nernstian response was observed over the concentration range 1.0×10−4 to 1.0×10−2 mol/L. Average slopes were about 48 mV/decade. The sensors were successfully applied to field monitoring of CPZ in fish samples, offering the advantages of simplicity, accuracy, automation feasibility and applicability to complex samples.

Man-tailored biomimetic sensor of molecularly imprinted materials for the potentiometric measurement of oxytetracycline

A novel biomimetic sensor for the potentiometric transduction of oxytetracycline is presented. The artificial host was imprinted in methacrylic acid and/or acrylamide based polymers. Different amounts of molecularly imprinted and non-imprinted polymers were dispersed in different plasticizing solvents and entrapped in a poly(vinyl chloride) matrix. Only molecularly imprinted based sensors allowed a potentiometric transduction, suggesting the existence of host–guest interactions. These sensors exhibited a near-Nernstian response in steady state evaluations; slopes and detection limits ranged 42–63 mV/decade and 2.5–31.3 µg/mL, respectively. Sensors were independent from the pH of test solutions within 2–5. Good selectivity was observed towards glycine, ciprofloxacin, creatinine, acid nalidixic, sulfadiazine, cysteine, hydroxylamine and lactose. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ±0.7%), fast response, good sensitivity (65 mV/decade), wide linear range (5.0×10−5 to 1.0×10−2 mol/L), low detection limit (19.8 µg/mL), and a stable baseline for a 5×10−3M citrate buffer (pH 2.5) carrier. The sensors were successfully applied to the analysis of drugs and urine. This work confirms the possibility of using molecularly imprinted polymers as ionophores for organic ion recognition in potentiometric transduction.