Urban streetscape bryophytes and heavy metals

This thesis presents the first large scale examination of urban bryophytes in Australia in terms of species distribution, screening as hyperaccumulators and use as biomonitors. It provides baseline data to allow future comparison of the distribution of urban bryoflora with respect to arsenic and the associated contribution of cadmium, copper, zinc and lead.

Surface alloying of metals using fluid bed reactor

The use of fluidised bed reactors for surface alloying is reviewed. Research at Deakin has includes the use of chemical vapour deposition to form chromium rich layers on ferrous substrates, including stainless and tool steel grades. These layers can be modified to carbide or nitride if required by the end application. The deposition of aluminium and silicon has also been successfully achieved.

Structure and capacitive properties of porous nanocrystalline VN produced by NH3 reduction of V2O5

Vanadium nitride (VN) is currently one of the most promising materials for electrodes of supercapacitors. The structure and electrochemical properties of VN synthesized by temperature-programmed NH₃ reduction of V₂O₅ are analyzed in this paper. Vanadium nitride produced via this route has distinctive structural characteristics. VN mimics the shape of the initial V₂O₅ precursor indicating a pronounced direct attachment of nitride grains. The particles have domains of grains with a preferential orientation (texture). The large volume of pores in VN is represented by the range of 15−110 nm. VN demonstrates capacitive properties in three different types of aqueous electrolytes, 1 M KOH, 1 M H₂SO₄, and 3 M NaCl. The material has an acceptable rate capability in all electrolytes, showing about 80% of its maximal capacitance at a current load of 1 A/g in galvanostatic charging/discharging experiments. The capacitance of 186 F/g is observed in 1 M KOH electrolyte at 1 A/g. The previously reported negative effect of material loading on the capacitance is significantly suppressed. The observed electrochemical characteristics related to the application of this material in supercapacitors can be correlated with the crystalline structure of the nitride and the composition of its surface layer.

Effects of replication on measured S-N curves of metals

Replication, or repeated tests at the same stress amplitude, is used to provide statistical confidence in life data during the development of S-N curves. This paper discusses the effects of replication on the measurement of S-N curves and presents an alternative to traditional replication methods for the determination of S-N curves, particularly for the development of preliminary S-N curves. Using specimens made out of the extruded bars of a magnesium alloy, it is demonstrated that the S-N curve estimated using the data from non-replication tests is almost same as that from replication tests. The advantage of using non-replication fatigue tests is that it uses fewer specimens, in this instance, only half of that required for 50% replication fatigue test, to achieve the same estimation as that of the replication fatigue tests. Another advantage of using non-replication fatigue tests is that it can detect the non-linearity using limited specimens.

Influence of grain size on twinning in two hcp metals

Deformation twinning behaviour in differently grain sized samples of a commercial pure titanium and a magenisum alloy is investigated. In some aspects the phenomenology of twinning differs between the two materials while in others both materials show a similar response. Nucleation density per unit of nucleating interface and twin aspect ratio scale with applied stress. The impact of grain size on twin volume fraction is modelled analytically.

Nanograin metals and metallic multilayers produced by severe plastic deformation

This research has developed an improved understanding of the structure-property relationships, fabrication technology and deformation mechanism of light bulk ultrafine grained materials and metallic multilayered structure.

Nanocrystalline titanium to mesoporous anatase with high bioactivity

In present study, the formation of bioactive anatase on bulk titanium (Ti) by hybrid surface mechanical attrition treatment (SMAT) is reported. A commercial pure Ti plate first underwent SMAT in a vacuum for 1 h to produce a nanocrystalline layer with a thickness of about 30 µm, and then the nanocrystalline Ti (30 nm) was transformed into mesoporous anatase with a grain size 10 nm by chemical oxidation and calcination. The mesoporous anatase showed excellent bioactivity while being soaked in simulated body fluid, which could be attributed to the unique nanostructure on the SMAT Ti surface.

Recent progress on biosorption of heavy metals from liquids using low cost biosorbents : characterization, biosorption parameters and mechanism studies

A significant number of biosorption studies on the removal of heavy metal from aqueous solutions have been conducted worldwide. Nearly all of them have been directed towards optimizing biosorption parameters to obtain the highest removal efficiency while the rest of them are concerned with the biosorption mechanism. Combinations of FTIR, SEM-EDX, TEM as well as classical methods such as titrations are extremely useful in determining the main processes on the surfaces of biosorbents. Diverse functional groups represented by carboxyl, hydroxyl, sulfate and amino groups play significant roles in the biosorption process. Solution pH normally has a large impact on biosorption performance. In brief, ion exchange and complexation can be pointed out as the most prevalent mechanisms for the biosorption of most heavy metals.

Influence of trace-metals on the colour and photostability of wool

This study expands the knowledge of the mechanisms that cause wool to yellow. It established that metals in wool influence the production of free radicals and the extent of degradation and yellowing of photo-irradiated wool. It also examined the relationship between the colour and trace metal content of fleece wool.

Effects of replication on measured S-N curves of metals

Replication, or repeated tests at the same stress amplitude, is used to provide statistical confidence in life data during the development of S-N curves. This paper discusses the effects of replication on the measurement of S-N curves and presents an alternative to traditional replication methods for the determination of S-N curves, particularly for the development of preliminary S-N curves. Using specimens made out of the extruded bars of a magnesium alloy, it is demonstrated that the S-N curve estimated using the data from non-replication tests is almost same as that from replication tests. The advantage of using non-replication fatigue tests is that it uses fewer specimens, in this instance, only half of that required for 50% replication fatigue test, to achieve the same estimation as that of the replication fatigue tests. Another advantage of using non-replication fatigue tests is that it can detect the non-linearity using limited specimens.

Crystal orientation characterisation of electrodeposited nanocrystalline nickel alloy

The collection contains EBSD maps of annealed nanocrystalline Ni and Ni-Fe alloys. The maps show the variation of crystallographic texture across mesoscale colonies within these alloys.

Modelling the combined effect of grain size and grain shape on plastic anisotropy of metals

Within each columnar grain of a metallic film, the resistance to dislocation glide varies in function of the orientation of the slip plane with regard to the grain long axis. Plastic slip is impeded across grain boundaries and this contributes to the anisotropy of the overall mechanical response. A simplified (Taylor-type) crystal plasticity model is proposed that accounts for such effect of grain shape on the slip system selection. Assuming that dislocation density gradients are normal to the grain boundaries, backstresses developed at the onset of plasticity are estimated based on two definitions of the effective grain boundary spacing ‘‘seen’’ by individual slip systems. The first one reduces to the mean area-to-perimeter ratio of cross-sections of the grain cut parallel to the slip plane. Closed-form expressions of the average backstresses developed inside grains with spheroidal shapes are introduced in the crystal hardening law. The model reproduces the very high plastic anisotropy of electro-deposited pure iron with a strong c-fiber and a refined columnar grain structure [Yoshinaga, N., Sugiura, N., Hiwatashi, S., Ushioda, K., Kada, O., 2008. Deep drawability of electro-deposited pure iron having an extremely sharp h111i//ND texture. ISIJ Int. 48, 667–670]. It also provides valid estimates of the texture development and the influence of grain size on the yield strength.