MSW: from pollution/degradation source to resource

Municipal Solid Waste is one of the biggest challenges that cities are facing: MSW is considered of the main sources of energy consumption, urban degradation and pollution. This paper defines the major negative effects of MSW on cities and proposes new solutions to guide waste policies. Most contemporary waste management efforts are focused at regional government level and based on high tech waste disposal by methods such as landfill and incineration. However, these methods are becoming increasingly expensive, energy inefficient and pollutant: waste disposal is not sustainable and will have negative implications for future generations. In this paper are proposed all the principle solutions that could be undertaken. New policy instruments are presented updating and adapting policies and encouraging innovation for less wasteful systems. Waste management plans are fundamental to increase the ability of urban areas effectively to adapt to waste challenges. These plans have to give an outline of waste streams and treatment options and provide a scenario for the following years that significantly reduce landfills and incinerators in favor of prevention, reuse and recycling. The key aim of an urban waste management plan is to set out the work towards a zero waste economy as part of the transition to a sustainable economy. Other questions remain still opened: How to change people’s behavior? What is the role of environmental education and risk perception? It is sure that the involvement of the various stakeholders and the wider public in the planning process should aim at ensuring acceptance of the waste policy.

Physico-chemical properties of sol-gel synthesized titanosilicates for the uptake of radionuclides from aqueous solutions

Harnessing the power of nuclear reactions has brought huge benefits in terms of nuclear energy, medicine and defence as well as risks including the management of nuclear wastes. One of the main issues for radioactive waste management is liquid radioactive waste (LRW). Different methods have been applied to remediate LRW, thereunder ion exchange and adsorption. Comparative studies have demonstrated that Na2Ti2O3SiO4·2H2O titanosilicate sorption materials are the most promising in terms of Cs+ and Sr2+ retention from LRW. Therefore these TiSi materials became the object of this study. The recently developed in Ukraine sol-gel method of synthesizing these materials was chosen among the other reported approaches since it allows obtaining the TiSi materials in the form of particles with size ≥ 4mm. utilizing inexpensive and bulk stable inorganic precursors and yielded the materials with desirable properties by alteration of the comparatively mild synthesis conditions. The main aim of this study was to investigate the physico-chemical properties of sol-gel synthesized titanosilicates for radionuclide uptake from aqueous solutions. The effect of synthesis conditions on the structural and sorption parameters of TiSi xerogels was planned to determine in order to obtain a highly efficient sorption material. The ability of the obtained TiSis to retain Cs+, Sr2+ and other potentially toxic metal cations from the synthetic and real aqueous solutions was intended to assess. To our expectations, abovementioned studies will illustrate the efficiency and profitability of the chosen synthesis approach, synthesis conditions and the obtained materials. X-ray diffraction, low temperature adsorption/desorption surface area analysis, X-ray photoelectron spectroscopy, infrared spectroscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy was used for xerogels characterization. The sorption capability of the synthesized TiSi gels was studied as a function of pH, adsorbent mass, initial concentration of target ion, contact time, temperature, composition and concentration of the background solution. It was found that the applied sol-gel approach yielded materials with a poorly crystalline sodium titanosilicate structure under relatively mild synthesis conditions. The temperature of HTT has the strongest influence on the structure of the materials and consequently was concluded to be the control factor for the preparation of gels with the desired properties. The obtained materials proved to be effective and selective for both Sr2+ and Cs+ decontamination from synthetic and real aqueous solutions like drinking, ground, sea and mine waters, blood plasma and liquid radioactive wastes.

Legal consideration on Convention for the Prevention of Dumping of Wastes and Other Matter (at sea) and assessment of its implementation in Iran (The London [dumping] Convention)

Making use of sea, as a place for dumping of wastes and other materials from human activities wasn’t forbidden before creation of the convention on the prevention of marine pollution by dumping of wastes and other matters (London Convention). Therefore, industrial countries, without any specific consideration, were dumping their wastes into the world’s seas. Many years and before the beginning of rapid development of industry, the great self- purification of seas were preventing some of discharging problems. But gradually, the increase of industrial development activities, exceeded the production of wastes and other matters, and this led to the misuse of world’s seas and oceans as a dump site. One of the most important consequences of 1972 Stockholm World Conference was to focusing world attention on threats have jeopardized marine environment balance. World countries` leaders committed in Stockholm to begin protecting the environment. Finally, this movement at marine environment section led to the creation of London Convention in the same year. London Convention was concluded for cooperating between countries at December 29, 1972 to promote effective control of all marine environment polluting resources and to prevent marine pollution by dumping wastes and other matters. Then it was opened for signature to other countries. At last, after 15 states signature, this convention was entered in to force at August 30.1975. Ratification and execution of London Convention resulted in coordinated performance of countries in marine waste management. Common actions with supports and cooperation of different international, regional, governmental and non-governmental organizations and agencies prevent marine pollution by dumping of wastes and other matters. Due to the importance of wastes in our marine and coastal areas, investigation of the performance of London Convention can identify the lack of regulations and lack of regulation supports about marine pollution prevention by dumping of wastes and other matters in Iran. Considering this issue, proper protection of seas will be achieved. London Convention has been studied here to achieve intended purposes. In first chapter, generalities about marine environment, including the importance and necessity of marine environment protection, with the focus on some internal and international resources of environmental law accompanying with marine pollution and its recourses, and finally, due to the study theme, dumping of wastes and other matters at seas with its impacts have been investigated .In the section of international measures, a brief history of marine pollution and marine environment international law with international law framework, exclusively for controlling of wastes and other material discharge at seas and oceans has been reviewed. In second chapter, obligations, amendments, and annexes of London Convention have been investigated and classified. The obligations have been categorized in to legal obligations and technical and organizational obligations. In former section, subject ,purpose, territory, exceptions, rights and duties of parties, convention amendments,… and in latter, special requirements for wastes assessment, determination of pollutants` permissible limit, site selection and type of discharge selection, design principles for marine environment quality monitoring program, and discharge license issuance mechanism have been studied. In third chapter, due to the examination of convention performance in Iran, the internal law system for marine environment conservation and its pollution has been mentioned in detail. Considering this, two issues have been compared .firstly, convention obligations with regional treaties that Iran as a party to them and secondly, Iranian internal law there of .Finally, common and different aspects of these issues have been determined. At last, recommendations and strategies for convention enforcement and conformity of its obligations with internal regulations have been presented. Furthermore, translation of convention English text has been reviewed and its protocol has been translated.

Projeto café do trabalhador como promotor de segurança alimentar e nutricional: avaliação da eficácia da unidade Natal-RN

The evaluation of public policies that promote Food Security and Nutrition (FSN) it s a multidisciplinary activity extremely relevant to the effectiveness of actions to legitimize the Human Right to Adequate Food (HRAF). This study aimed at assessing the effectiveness of the unit project Natal-RN Café do Trabalhador in promoting SAN to its users. The theoretical framework is based on the public and political and on the dimensions of the concept of FSN (quantity and quality-regularity). Through a qualitative approach, methodologically this was the work of an evaluation of efficiency of the unit Natal-RN of Café do Trabalhador project in light of the assumptions of the concept of SAN. Data collection was conducted through retrospective archival research in official documents of the project, semi-structured interviews with managers involved in its implementation (representative of the Secretary of State for Employment, Housing and Care of RN SETHAS and third party), socioeconomic questionnaire applied to the users of the unit, check the amount, regularity and quality of meals offered for 15 days (menu routine) using the descriptive form menu and form filling type checklist for verification of compliance with good practices . Methods of analysis, we used content analysis, descriptive statistics and compared to previously established parameters for the project. As categories of analysis were defined organizational arrangement, access, user, food quantity-regularity and food quality. The results show that, it was found in the category arrangement that will implement the project dismissed technical criteria for choosing the districts and the quantitative distribution of meals for each location. It was found that the valuation of the shares of the company outsources technical SETHA has not been performed. We observed in the access category, the unit has a strategic location, but lack of space in the refectory. The main obstacle to economic access for users is the lack of a register for the beneficiaries. In the category of users, it was identified that the clientele of the project it is predominantly men, with more than 51 years, low education, earning wages less 1 obtained through informal employment, which they move up through the unit transport collective, go to all days of operation due primarily to price. About the meals category quantity-regularity of food showed that the menu serves 95% of the desired needs, and that holidays and weekends are periods of disrupting the regularity of supply of meals. Regarding the category of food quality, it was found that the nutritional aspect on the menu are food sources rich in sodium, nitrates and low in fiber. In the aspect of hygiene and sanitation are the main limitations related to waste management, lack of exposure controls of food prepared and inadequacies of the physical structure. The results showed that in general and the institutional arrangement of the organs attached to the project should establish a systematic evaluation project is to establish as a promoter of and FSN overcome these obstacles

Elaboración de un plan de gestión de residuos sólidos y estudio de los factores que inciden en la eficiencia y eficacia del plan en las Mecánicas-talleres MAGL y J. J. & Hijos

La generación de residuos sólidos dentro de las mecánicas automotrices en la actualidad, se ha convertido en unos de los principales problemas difíciles de manejar y solucionar, debido al incremento y demanda de vehículos, generando un impacto ambiental negativo tanto en el área de trabajo como en la ciudad. Por tal razón, en varias ciudades del Ecuador y del mundo se ha propuesto la implementación de diferentes planes para el manejo de Residuos Sólidos en este sector. El presente estudio está enfocado a la elaboración de un plan de gestión de Residuos Sólidos, aplicado a dos mecánicas automotrices de la ciudad de Cuenca: J.J. & HIJO y MAGL, realizando de esta manera un análisis a los factores que inciden en la eficiencia y eficacia del mismo. El diseño y aplicación del plan de gestión permitirá estimar el grado de impacto ambiental producido por la generación de los residuos en mecánicas automotrices, por otro lado permitirá la optimización de recursos, disminución de impactos y contaminaciones ambientales, mejoras en el sistema de clasificación, recolección, transporte y disposición final de los desechos e impulsar la conservación de ambiente que nos rodea.

Avaliação do desempenho das entidades gestoras dos serviços de resíduos urbanos em Portugal

Dissertação de Mestrado, Gestão Empresarial, Faculdade de Economia, Universidade do Algarve, 2016

Análise comparativa entre as propriedades do gesso obtido de rejeito da produção de sal e gesso comerciais

The environmental impacts, caused by the solid residues generation, are an often quoted concern nowadays. Some of these residues, which are originated from different human activities, can be fully reused, reducing the effects of the poor waste management on the environment. During the salt production process, the first formed crystals are discarded as industrial waste. This is mainly made of gypsum that is a calcium sulfate dihydrate (CaSO4.2H2O). The gypsum in question may go through a calcination process due to the plaster (CaSO4.0,5H2O) production and then the application on the cement industry. Considering the necessity of development and application for these industrial wastes, this paper aims to analyze the plaster, called Salgesso, from the gypsum that was generated during the salt production, and its use viability on the civil construction industry in order to create environmental and economical benefits. For characterization, the following experiments were performed: X-ray Fluorescence (XRF), X-ray Diffraction (XRD), thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM) with EDS. The following tests were also performed to obtain the mechanical characteristics: Thinness Modulus, Unit Mass, Setting Time and Compressive Resistance. Three commercial plasters used on civil construction were taken as references. All of these tests were performed according to the current standards. It was noticed that although there were some conflicting findings between the salt and commercial plasters in all of the studied properties, the Salgesso has its values within the standard limits. However, there is the possibility to improve them by doing a more effective calcination process. Three commercial plasters, used in construction, were used as reference material. All tests were performed according to standards in force. It was observed that although some tests present conflicting findings between the salt and gypsum plasters commercial properties in all of the studied Salgesso have values within the limits imposed by the standard, but can be improved simply by calcination process more effective

Gerenciamento e tratamento de resíduos químicos dos laboratórios da Embrapa Pecuária Sudeste.

2006

Gestão sustentável de resíduos sólidos em grandes eventos : Rio+20 e jogos olímpicos de Londres

Dissertação (mestrado)—Universidade de Brasília, Centro de Desenvolvimento Sustentável, 2015

Composting of different agro-food wastes: Effects of the phenolic and lignocellulosic fractions on greenhouse gases emissions

Currently, society faces a number of challenges related to the large amounts of organic wastes generated and accumulated by the increasing expansion of agroindustrial activities1. Most of these wastes are rich in lignocellulosic compounds, which represents a major fraction of all plant biomass (of above 90%), so, its degradation is crucial for global carbon cycle2. These organic wastes may be introduced directly on agriculture sector as soil organic amendment, however, these might contain phytochemicals, such as phenolic compounds which may introduce toxic effects to soil and to beneficial organisms. Transformation and degradation of these renewable organic wastes into composts (COMPOSTING) is a possible solution for these problems and an environmentally friendly processes that allows make use of natural resources efficiently3. The main potential handicap is generation and emission of greenhouse gases such as carbon dioxide (CO2 ), methane (CH4 ) and nitrous oxide (N2O) and another ones which may led serious problems like nitric oxide (NO) and ammonia (NH3) 4. For this reason, quantification of GHG emissions from composting and finding possible relations with the chemical and structural composition of the wastes used is crucial to the development of technologies for mitigating emissions and should help to make decisions concerning waste management.

Compass e-newsletter

The “Compass E-Newsletter” is published quarterly by the South Carolina Department of Health and Environmental Control and is compiled by the Office of Solid Waste Reduction and Recycling to provide environmental information from the agency.

Compass e-newsletter

The “Compass E-Newsletter” is published quarterly by the South Carolina Department of Health and Environmental Control and is compiled by the Office of Solid Waste Reduction and Recycling to provide environmental information from the agency.