Quality assurance of aerial applications of larvicides for mosquito control : effects of granule and catch tray size on field monitoring programs

Aerial applications of granular insecticides are preferable because they can effectively penetrate vegetation, there is less drift, and no loss of product due to evaporation. We aimed to 1) assess the field efficacy ofVectoBac G to control Aedes vigilax (Skuse) in saltmarsh pools, 2) develop a stochastic-modeling procedure to monitor application quality, and 3) assess the distribution of VectoBac G after an aerial application. Because ground-based studies with Ae. vigilax immatures found that VectoBac G provided effective control below the recommended label rate of 7 kg/ha, we trialed a nominated aerial rate of 5 kg/ha as a case study. Our distribution pattern modeling method indicated that the variability in the number of VectoBac G particles captured in catch-trays was greater than expected for 5 kg/ha and that the widely accepted contour mapping approach to visualize the deposition pattern provided spurious results and therefore was not statistically appropriate. Based on the results of distribution pattern modeling, we calculated the catch tray size required to analyze the distribution of aerially applied granular formulations. The minimum catch tray size for products with large granules was 4 m2 for Altosid pellets and 2 m2 for VectoBac G. In contrast, the minimum catch-tray size for Altosid XRG, Aquabac G, and Altosand, with smaller granule sizes, was 1 m2. Little gain in precision would be made by increasing the catch-tray size further, when the increased workload and infrastructure is considered. Our improved methods for monitoring the distribution pattern of aerially applied granular insecticides can be adapted for use by both public health and agricultural contractors.

The New Lawyer

This text is designed to implement the Threshold Learning Outcomes (TLOs) for law in the first year, and to incorporate Sally Kift’s First Year Curriculum principles: http://tls.vu.edu.au/portal/site/trans/Resources/KiftTransitonPedagogySixPrinciples_16Nov09.pdf This is a learning-centered text book intentionally designed for first year students and written by experts in legal education and the first year experience. It is written in a tone and style that engages and communicates effectively with first year law students, without compromising its rigour. It provides students with opportunities to contextualise and make sense of their learning by connecting that learning with what they already know, and with current contemporary issues and affairs. This work is designed to ease students through the transition from a diverse variety of backgrounds (such as high school, work or other disciplines) to the first year of law. It provides practical guidance about adjusting to law school and to university. Students are asked to regularly reflect upon why they are studying law. The book also prepares law students for success in their latter year studies in law by ensuring that they are equipped with the necessary threshold concepts and foundational skills to do well: for example, research skills (particularly, online research skills), reasoning skills, written communication skills, negotiation skills, and self-management skills. A range of practical tips on studying law are provided throughout the book. The work also asks students to engage with developing an emergent sense of professional identity – including what it means to ‘think like a lawyer’. In supporting the students to engage with the concept of professional identity, the work begins a process of preparing students for transition from law school to legal practice. This is achieved by providing explanations of how the material being presented relates to the practice of law, as well as practical information relating to employability skills as a new graduate. This work has a number of learning and teaching objectives to enhance the quality of student learning in their first year of law by engaging, motivating and supporting that learning. First, the work is designed to engage first year students with their legal education and with a future sense of professional identity. It does this through its: • Dynamic writing style • Engaging format • Inclusion of contemporary issues and events • Flowcharts, checklists, mind-maps, tables and timelines • Inclusion of real-world problems and dilemmas. Second, the text motivates student learning by promoting active learning. It does this by: • Demonstrating, and asking students to practice, what they need to do – that is, the work is not simply focussed on telling students what they need to know • Including regular self-directed learning exercises throughout each chapter, such as practical exercises for the development of important foundational legal skills • Including exercises that promote student collaboration, and that require students to apply their learning to practical situations, and • Incorporating a range of interesting active thinking points and research activities. Third, the book supports student learning by encouraging reflective learning and independent learning. It does this by including: • Specific content on how to be a reflective practitioner and an independent learner • Exercises that require students to engage in independent learning, particularly in relation to legal research skill development • Exercises requiring students to reflect upon what they have learned, and encouraging students to keep a reflective learning journal • Exercises requiring students to reflect upon their own views and beliefs • Reflection on whether students have achieved the learning objectives articulated at the beginning of the chapter. The work also: • Demonstrates respect for student experiences, views, opinions and values • Acknowledges student diversity • Recognises the importance of being globally minded law students and lawyers • Supports law teachers in using the work in their classrooms through the provision of comprehensive teaching materials.

A Statutory interpretation EXperience : putting the SEX into statutory interpretation

With the growing proliferation of statute laws, the skill of statutory interpretation is an increasingly important aspect of legal practice. Despite the importance, statutory interpretation can be a challenging area of law to teach to undergraduate law students, who may find the topic dry and disengaging when taught through traditional methods. Such disengagement may adversely affect knowledge retention, particularly if the material is taught in the first or second year of study and not explicitly reinforced in subsequent years. Concern over the present standard of statutory interpretation skills being exhibited by practitioners, has prompted the Chief Justice of the Supreme Court of Queensland to contact law schools, enquiring how and to what extent statutory interpretation is being taught...

Performance psychology applied to dance

The recent interest in the area of performance psychology has included a focus on applied practice within the performing arts. The use of psychology within this field has been occurring for many years, although practice has been observed to originate primarily from within clinical psychology in dealing with ‘problems’ (e.g. eating disorders). During the past 15 years, increased interest and focus has come from the field of sport psychology and its application to fields such as dance. Experience with the application of sport psychology in the dance profession has shown that dancers identify primarily with the concept of performance psychology. The focus of applied performance psychology practice with dancers has been observed to incorporate principles from across sport, clinical and organisational psychology, yet packaged together in such a way that the focus is on performance enhancement – whether that be in terms of dance technique, artistry, creativity, or personal skill development both on and off the stage. This paper focuses upon sharing the practitioner’s experience of the delivery of performance psychology to dancers (both professionals and dancers-in-training), and discussion of the considerations related to this undertaking within this unique population.

IT consultants, salesmanship and the challenges of packaged software selection in SMEs

Purpose – This paper seeks to analyse the process of packaged software selection in a small organization, focussing particularly on the role of IT consultants as intermediaries in the process. Design/methodology/approach – This is based upon a longitudinal, qualitative field study concerning the adoption of a customer relationship management package in an SME management consultancy. Findings – The authors illustrate how the process of “salesmanship”, an activity directed by the vendor/consultant and focussed on the interests of senior management, marginalises user needs and ultimately secures the procurement of the software package. Research limitations/implications – Despite the best intentions the authors lose something of the rich detail of the lived experience of technology in presenting the case study as a linear narrative. Specifically, the authors have been unable to do justice to the complexity of the multifarious ways in which individual perceptions of the project were influenced and shaped by the opinions of others. Practical implications – Practitioners, particularly those from within SMEs, should be made aware of the ways in which external parties may have a vested interest in steering projects in a particular direction, which may not necessarily align with their own interests. Originality/value – This study highlights in detail the role of consultants and vendors in software selection processes, an area which has received minimal attention to date. Prior work in this area emphasises the necessary conditions for, and positive outcomes of, appointing external parties in an SME context, with only limited attention being paid to the potential problems such engagements may bring.

Achieving enterprise integration through software customization : part I-evidence from the field

Achieving business and IT integration is strategic goal for many organisations – it has almost become the ‘Holy Grail’ of organisational success. In this environment Enterprise Resource Planning (ERP) packages have become the defacto option for addressing this issue. Integration has come to mean adopting ERP, through configuration and without customization, but this all or nothing approach has proved difficult for many organisations. In part 1 of a 2 part update we provide evidence from the field that suggests that whilst costly, if managed appropriately, customization can have value in aiding organisational integration efforts. In part 2, we discuss in more detail the benefits and pitfalls involved in enacting a non-standard based integration strategy.

Development of a 3500-tonne field robot

The mining industry is highly suitable for the application of robotics and automation technology, since the work is arduous, dangerous, and often repetitive. This paper presents a broad overview of the issues involved in the development of a physically large and complex field robotic system—a 3500-tonne mining machine (dragline). Draglines are “walking cranes” used in open-pit coal mining to remove the material covering a coal seam. The critical issues of robust load position sensing, modeling of the dynamics of the electrical drive system and the swinging load, control strategies, the operator interface, and automation system architecture are addressed. An important aspect of this system is that it must work cooperatively with a human operator, seamlessly passing control back and forth in order to achieve the main aim—increased productivity.

An experimental approach to air gap optimisation for a correction-less small field diode

Aim A recent Monte Carlo based study has shown that it is possible to design a diode that measures small field output factors equivalent to that in water. This is accomplished by placing an appropriate sized air gap above the silicon chip (1) with experimental results subsequently confirming that a particular Monte Carlo design was accurate (2). The aim of this work was to test if a new correction-less diode could be designed using an entirely experimental methodology. Method: All measurements were performed on a Varian iX at a depth of 5 cm, SSD of 95 cm and field sizes of 5, 6, 8, 10, 20 and 30 mm. Firstly, the experimental transfer of kq,clin,kq,msr from a commonly used diode detector (IBA, stereotactic field diode (SFD)) to another diode detector (Sun Nuclear, unshielded diode, (EDGEe)) was tested. These results were compared to Monte Carlo calculated values of the EDGEe. Secondly, the air gap above the EDGEe silicon chip was optimised empirically. Nine different air gap “tops” were placed above the EDGEe (air depth = 0.3, 0.6, 0.9 mm; air width = 3.06, 4.59, 6.13 mm). The sensitivity of the EDGEe was plotted as a function of air gap thickness for the field sizes measured. Results: The transfer of kq,clin,kq,msr from the SFD to the EDGEe was correct to within the simulation and measurement uncertainties. The EDGEe detector can be made “correction-less” for field sizes of 5 and 6 mm, but was ∼2% from being “correction-less” at field sizes of 8 and 10 mm. Conclusion Different materials will perturb small fields in different ways. A detector is only “correction-less” if all these perturbations happen to cancel out. Designing a “correction-less” diode is a complicated process, thus it is reasonable to expect that Monte Carlo simulations should play an important role.

Lived experience and devised theatre practice : a study of Australian and Norwegian theatre students' devised theatrical practice

This study explores the incorporation of young people's lived experience upon the creative dynamics in the development of devised performance practice. By employing Vygotsky's creativity theory to devising processes the role of lived experience is analyzed through three case studies located in two theatre education colleges in Norway and Australia. The study demonstrates how young peoples' life experience is a primary resource that is developed and reasoned upon in the creative performance practice. A key finding of the study is the identification of two distinct type of performance outcome in devised theatre practice, described as "livsbasert/life-based" and "egenskapt/self-made" that will enable devised theatre to have a more nuanced understanding of both process and product in the Nordic context.

Entomopathogens for control of Hypsipyla spp

Published information on the incidence of pathogens in the field and laboratory infections of Hypsipyla spp. with entomopathogens is reviewed. In addition, some preliminary results of field collections from Ghana and Costa Rica are presented. Fungal pathogens from the Deuteromycetes have been isolated from both H. robusta Moore and H. grandella Zeller. Mermithid nematodes, Hexamermis spp., have been frequently isolated from larvae in the field and incidence of infection with these pathogens can reach significant levels. Microsporidia have been found in cadavers of larvae collected in the field but none have been identified so far. A number of pathogens of other Lepidoptera have been shown to be infectious to H. grandella , including Bacillus thuringiensis , Deuteromycete fungi and a nucleopolyhedrovirus (NPV) from Autographa californica . Hypsipyla spp. are difficult targets for microbial control, since the larvae are cryptic, occur at low density and occur sporadically. In addition, there is a low damage threshold, the plant is susceptible for a number of years and the susceptible part of the plant will rapidly outgrow any surface application. Key features of the biology of entomopathogens with relevance to the control of low density and cryptic pests are discussed. In the light of this experience, we discuss strategies to improve the possibilities of microbial control of this pest and suggest areas for research.

A motor controller using field oriented control and Hall effect rotor position sensors : simulation and implementation

A field oriented control (FOC) algorithm is simulated and implemented for use with a permanent magnet synchronous motor (PMSM). Rotor position is sensed using Hall effect switches on the stator because other hardware position sensors attached to the rotor may not be desirable or cost effective for certain applications. This places a limit on the resolution of position sensing – only a few Hall effect switches can be placed. In this simulation, three sensors are used and the position information is obtained at higher resolution by estimating it from the rotor dynamics, as shown in literature previously. This study compares the performance of the method with an incremental encoder using simulations. The FOC algorithm is implemented using Digital Motor Control (DMC) and IQ Texas Instruments libraries from a Simulink toolbox called Embedded Coder, and downloaded into a TI microcontroller (TMS320F28335) known as the Piccolo via Code Composer Studio (CCS).

Learned stochastic mobility prediction for planning with control uncertainty on unstructured terrain

Motion planning for planetary rovers must consider control uncertainty in order to maintain the safety of the platform during navigation. Modelling such control uncertainty is difficult due to the complex interaction between the platform and its environment. In this paper, we propose a motion planning approach whereby the outcome of control actions is learned from experience and represented statistically using a Gaussian process regression model. This mobility prediction model is trained using sample executions of motion primitives on representative terrain, and predicts the future outcome of control actions on similar terrain. Using Gaussian process regression allows us to exploit its inherent measure of prediction uncertainty in planning. We integrate mobility prediction into a Markov decision process framework and use dynamic programming to construct a control policy for navigation to a goal region in a terrain map built using an on-board depth sensor. We consider both rigid terrain, consisting of uneven ground, small rocks, and non-traversable rocks, and also deformable terrain. We introduce two methods for training the mobility prediction model from either proprioceptive or exteroceptive observations, and report results from nearly 300 experimental trials using a planetary rover platform in a Mars-analogue environment. Our results validate the approach and demonstrate the value of planning under uncertainty for safe and reliable navigation.

Transition Pedagogy Handbook : A Good Practice Guide for Policy and Practice in the First Year Experience at QUT

This Handbook has been specifically designed for academic and professional staff responsible for managing first year students and curriculum and co-curricular programs at QUT. As well as presenting examples of good practice, the handbook provides a brief overview of QUT’s First Year Experience Program, a summary of QUT’s First Year Experience and Retention Policy and the Transition Pedagogy that frames both curricular and co-curricular activities. We hope you find this resource both useful and informative.

Experience has no shadow : Bell tower III

I created Experience Has No Shadow (2010) following a successful Ausdance Qld choreographic grant in 2010, which comprised of two solos and a video-dance at the Performance Space at the Judith Wright Centre. The aim of the Bell Tower III residency was to research and construct a Stage One Development that explored choreographic approaches to oral histories. Like many first generation Australians, oral histories are the way memories and experiences of distant homelands often offer the only connection to cultural origins. Consequently, I drew on auto-ethnographic references in the form of family stories – specifically those of my mother’s family - told and retold by my mother and her family as East German refugees during World War II. While working on the video, I explored a way to make a direct connection to the past stories by using a recording of my mother’s voice. She is re-telling a favourite story about Salamo the circus horse that was sold to my great grandfather as a work horse. Rather than representing the text literally, I attempted to capture the intensity of the storytelling which accompanied abstract footage of Avril Huddy filmed through perspex glass producing animal-like shapes that continually blur and morph in and out of focus. Strangely, by tying the story in with the filmed images a whole new story seems to emerge. Two distinct solos were created in collaboration with the performers, Expressions Dance Company’s Elise May and QUT’s Avril Huddy. These were performed at the Judith Wright Centre for Contemporary Arts, Performance Space, 1st April, 2010. The simplicity of its design became a key concept behind the work in terms of sets, spacing requirements, and costumes – almost minimalist. The choreographic process was conceived as highly collaborative, with commissioned music (and eventually lighting features) to act as equal partners in the performance.

Wearable neuroimaging and emotion : investigating emotional responses to architectural environments with functional near-infrared spectroscopy (fNIRS)

Supported by contemporary theories of architectural aesthetics and neuro-aesthetics this paper presents a case for the use of portable fNIRS imaging in the assessment of emotional responses to spatial environments experienced by both blind and sighted. The aim of the paper is to outline the implications of fNIRS for spatial research and practice within the field of architecture, thereby suggesting a potential taxonomy of particular formations of space and affect. Empirical neurological study of affect and spatial experience from an architectural design perspective remains in many instances unchartered. Clinical research using the portable non-invasive neuro-imaging device, functional near infrared spectroscopy (fNIRS) is proving convincing in its ability to detect emotional responses to visual, spatio-auditory and task based stimuli, providing a firm basis to potentially track cortical activity in the appraisal of architectural environments. Additionally, recent neurological studies have sought to explore the manifold sensory abilities of the visually impaired to better understand spatial perception in general. Key studies reveal that early blind participants perform as well as sighted due to higher auditory and somato-sensory spatial acuity. For instance, face vision enables the visually impaired to detect environments through skin pressure, enabling at times an instantaneous impression of the layout of an unfamiliar environment. Studies also report pleasant and unpleasant emotional responses such as ‘weightedness’ or ‘claustrophobia’ within certain interior environments, revealing a deeper perceptual sensitivity then would be expected. We conclude with justification that comparative fNIRS studies between the sighted and blind concerning spatial experience have the potential to provide greater understanding of emotional responses to architectural environments.