Auger-type granular fertylizer distributor: matemathical model and dynamic simulation

The objective of this study was to model mathematically and to simulate the dynamic behavior of an auger-type fertilizer applicator (AFA) in order to use the variable-rate application (VRA) and reduce the coefficient of variation (CV) of the application, proposing an angular speed controller θ' for the motor drive shaft. The input model was θ' and the response was the fertilizer mass flow, due to the construction, density of fertilizer, fill factor and the end position of the auger. The model was used to simulate a control system in open loop, with an electric drive for AFA using an armature voltage (V A) controller. By introducing a sinusoidal excitation signal in V A with amplitude and delay phase optimized and varying θ' during an operation cycle, it is obtained a reduction of 29.8% in the CV (constant V A) to 11.4%. The development of the mathematical model was a first step towards the introduction of electric drive systems and closed loop control for the implementation of AFA with low CV in VRA.

Dynamic Hedging with Credit Default Swaps: Empirical Evidence from the European Monetary Union

This thesis investigates the effectiveness of time-varying hedging during the financial crisis of 2007 and the European Debt Crisis of 2010. In addition, the seven test economies are part of the European Monetary Union and these countries are in different economical states. Time-varying hedge ratio was constructed using conditional variances and correlations, which were created by using multivariate GARCH models. Here we have used three different underlying portfolios: national equity markets, government bond markets and the combination of these two. These underlying portfolios were hedged by using credit default swaps. Empirical part includes the in-sample and out-of-sample analysis, which are constructed by using constant and dynamic models. Moreover, almost in every case dynamic models outperform the constant ones in the determination of the hedge ratio. We could not find any statistically significant evidence to support the use of asymmetric dynamic conditional correlation model. In addition, our findings are in line with prior literature and support the use of time-varying hedge ratio. Finally, we found that in some cases credit default swaps are not suitable instruments for hedging and they act more as a speculative instrument.

The effect of dynamic capabilities on operational-level innovation – Empirical study in magazine publishing industry

This master’s thesis aims to examine the relationship between dynamic capabilities and operational-level innovations. In addition, measures for the concept of dynamic capabilities are developed. The study was executed in the magazine publishing industry which is considered favourable for examining dynamic capabilities, since the sector is characterized by rapid change. As a basis for the study and the measure development, a literary review was conducted. Data for the empirical section was gathered by a survey targeted to chief-editors of Finnish consumer magazines. The relationship between dynamic capabilities and innovation was examined by multiple linear regression. The results indicate that dynamic capabilities have effect on the emergence of radical innovations. Environmental dynamism’s effect on radical innovations was not detected. Also, dynamic capabilities’ effect on innovation was not greater in turbulent operating environment.

Hazard Risk Management in Large Nordic Companies' Operations in Russia

The objective of this research was to describe how Nordic companies manage hazard risks in their operations in Russia and how the local business environment is considered to affect the hazard risks. Research methods used in this research were literature review and expert interviews. Twelve Nordic industrial companies operating in different fields of industry were interviewed. Large Nordic companies typically guide risk management centralized from the parent company on behalf of the whole company group and the risk management standards and policies are integrated in all subsidiaries. Parent companies typically control hazard risk management in Russia by regular risk management reporting, auditing the Russian sites and by training local managers and employees to risk management work. Many companies have experienced several losses in the first years of operating in Russia before the risk management policies have been implemented in Russian subsidiaries. The companies have learned to take local characteristics better into account by experience and most companies are quite satisfied with their current risk management standards in Russia. The interviews indicate that companies experience especially the poor quality of infrastructure, some features in Russian organizational culture and high level of criminality to increase hazard risks in Russia. However, understanding these features and risks in the business environment makes the management of these risks possible. Risks related to infrastructure can be managed in advance by decreasing dependencies of infrastructure and considering the infrastructure quality already when planning the business operations. Also good local network is often considered critical in order to overcome the complications related to infrastructure. Russian personnel has typically different attitude towards risk management than Nordic personnel and neglecting safety and maintenance and concealing losses is more typical in Russia. By training and guiding the local personnel risk management and safety work and desired ways of actions these risks can be decreased. Criminality risks are often managed to certain extent by investing in security, increasing supervising and paying attention to reliability of the employees and other interest groups of the company.

A ética médica sob o viés da bioética: o exercício moral da cirurgia

O exercício profissional da medicina atual tem uma forte abordagem biológica, devido à crescente especialização da ciência médica. Com frequência, a ciência, por si só, não ajuda a enfrentar e resolver uma situação particular de um profissional médico, e este é o lugar onde as ciências humanas, sociais e, especialmente as outras disciplinas, como a Bioética, podem dar uma abordagem mais humana e socialista, ao estudar sistematicamente a conduta humana no campo das ciências da vida e da saúde, através da luz dos valores e princípios morais. Como parte deste estudo, o segmento que está limitado à análise dos conflitos éticos decorrentes da prática da medicina e da assistência ao paciente, é conhecido como Ética médica. A Ética médica, no âmbito da cirurgia, compreende a integração do paciente cirúrgico com a natureza do cirurgião, influenciada pela sua formação e pelo seu treinamento, pela sua sensibilidade em identificar o que é correto. O ético não deve estar apenas no procedimento, no ato cirúrgico propriamente dito ou no que acontece em uma sala de operação ou mesmo no exercício da cirurgia como especialidade. A ética deve estar na vida e conduta do cirurgião, de forma que todos os atos profissionais e de vida devam ser eticamente válidos.

A multibody dynamic model of the cross-country ski-skating technique

The objective of this thesis is the development of a multibody dynamic model matching the observed movements of the lower limb of a skier performing the skating technique in cross-country style. During the construction of this model, the formulation of the equation of motion was made using the Euler - Lagrange approach with multipliers applied to a multibody system in three dimensions. The description of the lower limb of the skate skier and the ski was completed by employing three bodies, one representing the ski, and two representing the natural movements of the leg of the skier. The resultant system has 13 joint constraints due to the interconnection of the bodies, and four prescribed kinematic constraints to account for the movements of the leg, leaving the amount of degrees of freedom equal to one. The push-off force exerted by the skate skier was taken directly from measurements made on-site in the ski tunnel at the Vuokatti facilities (Finland) and was input into the model as a continuous function. Then, the resultant velocities and movement of the ski, center of mass of the skier, and variation of the skating angle were studied to understand the response of the model to the variation of important parameters of the skate technique. This allowed a comparison of the model results with the real movement of the skier. Further developments can be made to this model to better approximate the results to the real movement of the leg. One can achieve this by changing the constraints to include the behavior of the real leg joints and muscle actuation. As mentioned in the introduction of this thesis, a multibody dynamic model can be used to provide relevant information to ski designers and to obtain optimized results of the given variables, which athletes can use to improve their performance.

Dynamic Ownership in Family Business System – A Portfolio Business Approach

Family businesses are among the longest-lived most prevalent institutions in the world and they are an important source of economic development and growth. Ownership is a key to the business life of the firm and also one main key in family business definition. There is only a little portfolio entrepreneurship or portfolio business research within family business context. The absence of empirical evidence on the long-term relationship between family ownership and portfolio development presents an important gap in the family business literature. This study deals with the family business ownership changes and the development of portfolios in the family business and it is positioned in to the conversation of family business, growth, ownership, management and strategy. This study contributes and expands the existing body of theory on family business and ownership. From the theoretical point of view this study combines insights from the fields of portfolio entrepreneurship, ownership, and family business and integrate them. This crossfertilization produces interesting empirical and theoretical findings that can constitute a basis for solid contributions to the understanding of ownership dynamics and portfolio entrepreneurship in family firms. The research strategy chosen for this study represents longitudinal, qualitative, hermeneutic, and deductive approaches.The empirical part of study is using a case study approach with embedded design, that is, multiple levels of analysis within a single study. The study consists of two cases and it begins with a pilot case which will form a preunderstanding on the phenomenon. Pilot case develops the methodology approach to build in the main case and the main case will deepen the understanding of the phenomenon. This study develops and tests a research method of family business portfolio development focusing on investigating how ownership changes are influencing to the family business structures over time. This study reveals the linkages between dimensions of ownership and how they give rise to portfolio business development within the context of the family business. The empirical results of the study suggest that family business ownership is dynamic and owners are using ownership as a tool for creating business portfolios.

Development of racemization catalysts for dynamic kinetic resolution

Preparation of optically active compounds is of high importance in modern medicinal chemistry. Despite recent advances in the field of asymmetric synthesis, resolution of racemates still remains the most utilized way for preparation of single enantiomers in industrial scale due to its cost-efficiency and simplicity. Enzymatic kinetic resolution (KR) of racemates is a classical method for separation of enantiomers. One of its drawbacks is the limitation of target enantiomer yield to 50%. Dynamic Kinetic Resolution (DKR) allows to reach yields up to 100% by in situ racemization of the less reactive enantiomer. In the first part of this thesis, a number of half-sandwich ruthenium complexes were prepared and evaluated as catalysts for racemization of optically active secondary alcohols. A leading catalyst, Bn5CpRu(CO)2Cl, was identified. The catalyst discovered was extensively characterized by its application for DKR of a broad range of secondary alcohols in a wide range of reaction loadings (1 mmol – 1 mol). Cost-efficient chromatography-free procedure for preparation of this catalyst was developed. Further, detailed kinetic and mechanistic studies of the racemization reactions were performed. Comparison of racemization rates in the presence of Bn5CpRu(CO)2Cl and Ph5CpRu(CO)2Cl catalysts reveals that the performance of the catalytic system can be adjusted by matching of the electronic properties of the catalysts and the substrates. Moreover, dependence of the rate-limiting step from the electronic properties of the reagents was observed. Important conclusions about reaction mechanism were made. Finally, an alternative approach to DKR of amines based on space separated vessels was addressed. This procedure allows the combination of thermolabile enzyme with racemization catalysts active only at high temperatures.

Simulation of structural stress history based on dynamic analysis

Modern machine structures are often fabricated by welding. From a fatigue point of view, the structural details and especially, the welded details are the most prone to fatigue damage and failure. Design against fatigue requires information on the fatigue resistance of a structure’s critical details and the stress loads that act on each detail. Even though, dynamic simulation of flexible bodies is already current method for analyzing structures, obtaining the stress history of a structural detail during dynamic simulation is a challenging task; especially when the detail has a complex geometry. In particular, analyzing the stress history of every structural detail within a single finite element model can be overwhelming since the amount of nodal degrees of freedom needed in the model may require an impractical amount of computational effort. The purpose of computer simulation is to reduce amount of prototypes and speed up the product development process. Also, to take operator influence into account, real time models, i.e. simplified and computationally efficient models are required. This in turn, requires stress computation to be efficient if it will be performed during dynamic simulation. The research looks back at the theoretical background of multibody dynamic simulation and finite element method to find suitable parts to form a new approach for efficient stress calculation. This study proposes that, the problem of stress calculation during dynamic simulation can be greatly simplified by using a combination of floating frame of reference formulation with modal superposition and a sub-modeling approach. In practice, the proposed approach can be used to efficiently generate the relevant fatigue assessment stress history for a structural detail during or after dynamic simulation. In this work numerical examples are presented to demonstrate the proposed approach in practice. The results show that approach is applicable and can be used as proposed.

On Dynamic Monitoring Methods for Networks-on-Chip

Rapid ongoing evolution of multiprocessors will lead to systems with hundreds of processing cores integrated in a single chip. An emerging challenge is the implementation of reliable and efficient interconnection between these cores as well as other components in the systems. Network-on-Chip is an interconnection approach which is intended to solve the performance bottleneck caused by traditional, poorly scalable communication structures such as buses. However, a large on-chip network involves issues related to congestion problems and system control, for instance. Additionally, faults can cause problems in multiprocessor systems. These faults can be transient faults, permanent manufacturing faults, or they can appear due to aging. To solve the emerging traffic management, controllability issues and to maintain system operation regardless of faults a monitoring system is needed. The monitoring system should be dynamically applicable to various purposes and it should fully cover the system under observation. In a large multiprocessor the distances between components can be relatively long. Therefore, the system should be designed so that the amount of energy-inefficient long-distance communication is minimized. This thesis presents a dynamically clustered distributed monitoring structure. The monitoring is distributed so that no centralized control is required for basic tasks such as traffic management and task mapping. To enable extensive analysis of different Network-on-Chip architectures, an in-house SystemC based simulation environment was implemented. It allows transaction level analysis without time consuming circuit level implementations during early design phases of novel architectures and features. The presented analysis shows that the dynamically clustered monitoring structure can be efficiently utilized for traffic management in faulty and congested Network-on-Chip-based multiprocessor systems. The monitoring structure can be also successfully applied for task mapping purposes. Furthermore, the analysis shows that the presented in-house simulation environment is flexible and practical tool for extensive Network-on-Chip architecture analysis.

Treatment of ununited anconeal process in 8 dogs by osteotomy and dynamic distraction of the proximal part of the ulna

A surgical technique for the treatment of ununited anconeal process in dogs treated by osteotomy and dynamic distraction of the proximal part of the ulna using a linear external skeletal fixator was evaluated. In all cases the osteotomy was distracted 1mm each day after the surgery until desired distraction had been achieved. Eight dogs and 9 joints diagnosed with ununited anconeal process were treated. The success of the procedure was determined by comparing clinical signs of lameness and degree of arthrosis at the time of diagnosis to 6 months after the surgical intervention. Radiographic union occurred in 88.9% of the affected joints between 21 and 42 days after the surgical procedure. Clinically, six elbows were classified as good, two as satisfactory and one as unsatisfactory. Six months after surgery two elbows had no arthrosis, one had Grade 1, two Grade 2 and one Grade 3. It is concluded the combination of ulnar osteotomy and dynamic distraction of the olecranon by a linear external skeletal fixator is a feasible procedure for the treatment of ununited anconeal process in dogs.

Dynamic optimization for the trajectory planning of robot manipulators in the presence of obstacles

This paper presents an approach to the solution of moving a robot manipulator with minimum cost along a specified geometric path in the presence of obstacles. The main idea is to express obstacle avoidance in terms of the distances between potentially colliding parts. The optimal traveling time and the minimum mechanical energy of the actuators are considered together to build a multiobjective function. A simple numerical example involving a Cartesian manipulator arm with two-degree-of-freedom is described.