Problems of Proto-Slavic Historical Nominal Morphology : On the Basis of Old Church Slavic

In this study I offer a diachronic solution for a number of difficult inflectional endings in Old Church Slavic nominal declensions. In this context I address the perhaps most disputed and the most important question of the Slavic nominal inflectional morphology: whether there was in Proto-Slavic an Auslautgesetz (ALG), a law of final syllables, that narrowed the Proto-Indo-European vowel */o/ to */u/ in closed word-final syllables. In addition, the work contains an exhaustive morphological classification of the nouns and adjectives that occur in canonical Old Church Slavic. I argue that Proto-Indo-European */o/ became Proto-Slavic */u/ before word-final */s/ and */N/. This conclusion is based on the impossibility of finding credible analogical (as opposed to phonological) explanations for the forms supporting the ALG hypothesis, and on the survival of the neuter gender in Slavic. It is not likely that the */o/-stem nominative singular ending */-u/ was borrowed from the accusative singular, because the latter would have been the only paradigmatic form with the stem vowel */-u-/. It is equally unlikely that the ending */-u/ was borrowed from the */u/-stems, because the latter constituted a moribund class. The usually stated motivation for such an analogical borrowing, i.e. a need to prevent the merger of */o/-stem masculines with neuters of the same class, is not tenable. Extra-Slavic, as well as intra-Slavic evidence suggests that phonologically-triggered mergers between two semantically opaque genders do not tend to be prevented, but rather that such mergers lead to the loss of the gender opposition in question. On the other hand, if */-os/ had not become */-us/, most nouns and, most importantly, all adjectives and pronouns would have lost the formal distinction between masculines and neuters. This would have necessarily resulted in the loss of the neuter gender. A new explanation is given for the most apparent piece of evidence against the ALG hypothesis, the nominative-accusative singular of the */es/-stem neuters, e.g. nebo 'sky'. I argue that it arose in late Proto-Slavic dialects, replacing regular nebe, under the influence of the */o/- and */yo/-stems where a correlation had emerged between a hard root-final consonant and the termination -o, on the one hand, and a soft root-final consonant and the termination -e, on the other.

Die Großstadt als Gegner? : Zur Wahrnehmung Berlins in Literatur, Film und Hörspiel der späten Weimarer Republik

Tässä tutkielmassa tarkastellaan, miten Berliinin suurkaupunki vaikutti Weimarin tasavallan loppuaikoina yksilöön. Tutkimusaineistona on Alfred Döblinin romaani Berlin Alexanderplatz sekä Walter Ruttmannin elokuva Berlin. Die Sinfonie der Großstadt ja kuunnelma Weekend. Teoreettisena taustana hyödynnetään kulttuuri- ja mediahistorian mentaliteetti- ja sosiaalihistoriaa. Aihetta käsitellään myös historiallis-temaattisesta lähtökohdasta, eli työssä tutkitaan todellisen Berliinin asemaa kyseisenä aikana, modernin metropolin olemusta, modernin ajan murrosvaihetta sekä uusasiallisen taidesuuntauksen vaikutusta teoksiin. Weimarin tasavallan aikana Saksassa elettiin murroksen keskellä. Toisaalta yhteiskunta oli poliittisesti pirstoutunut ja taloudellisesti epävakaa, mutta toisaalta kulttuurielämä oli lyhyen aikaa rikasta. Suurkaupungin asukkailla oli enemmän vapaa-aikaa ja mahdollisuuksia toteuttaa itseään omassa ympäristössään. Toisaalta ajan ristiriitaisuus kuitenkin vaikeutti yksilöllisen elämäntavan toteutumista; ihmiset odottivat murroskauden päättymiseltä materiaalista tyydytystä, jolloin henkiselle kehitykselle jäi vähän tilaa. Tärkein kysymyksenasettelu koskee suurkaupungin roolia oman aikansa tuotteena: missä määrin kaupunki oli ihmisen todellinen vastustaja ja missä määrin sen asema oli kuviteltua? Todellisen Berliinin suhdetta reflektoidaan fiktiiviseen suurkaupunkiympäristöön. Ensin tarkastellaan Berliiniä toimijana murroskaudella ja sitten käsitellään ajan ja tilan havainnointia. Koska teokset ovat fiktiivisiä, erityisen tarkastelun kohteena on todellisuuden, fiktion ja simulaation suhde. Tässä yhteydessä tarkastellaan myös kaupungin ja maaseudun välistä problematiikkaa. Kolmannessa osassa esille nousee yksilön ja massan välinen suhde, joka sekin vaikuttaa ihmisen ja suurkaupungin väliseen vastakkainasetteluun. Ilmensikö koneiden ja liikenteen dominoiva asema futuristista asetelmaa? Lisäksi käsitellään alamaailman ja kultaisen 20-luvun välistä kuilua. Kaikkia kolmea teosta yhdistää 24 tunnin aikakäsite; ajalla on selkeästi rajattu alku ja loppu, ja myös tilan käsite on tarkastelussa tärkeä. Kaikissa teoksissa on hyödynnetty montaasitekniikkaa. Kohtaukset vaihtuvat hyvinkin nopeasti, jolloin lukija, katsoja tai kuulija vieraantuu varsinaisesta kohteestaan. Montaasi vaikuttaa ratkaisevasti myös kaupungin ja yksilön suhteen kuvaukseen. Suurkaupungista muotoutuu lähes hirviömäinen, personifioitu subjekti, joka konemaisella olemuksellaan pyrkii nujertamaan pienen ihmisen. Döblinin romaanissa kertoja toimii ikään kuin yksilöä vastaan liittämällä kerronnan väliin uutisaiheita, säätiedotuksia ja kohtalokertomuksia. Elokuvassa ja kuunnelmassa teknologisen kehityksen ihannointi on noussut etualalle: ihmiset muistuttavat sekä yksilöinä että massana koneita, jotka liikkuvat hektisen mekaanisesti eteenpäin kuin liikennevälineet. He eivät kyseenalaista ympäristöään eivätkä koe olevansa oravanpyörässä. Romaanin päähenkilö on heijastanut omat pelkonsa konkreettisesti suurkaupungin infrastruktuuriin, kerrostaloihin, jotka tuntuvat kaatuvan hänen päälleen. Yksilöllinen kehitys on vaarassa pysähtyä, sillä koneistuminen tekee yksilöistä massaa. Elokuvassa ja kuunnelmassa kamppailu suurkaupunkiorganismin ja ihmisten välillä jatkuu, mutta romaanissa kamppailu päättyy päähenkilön parantumiseen. Hänestä tulee mallikansalainen - vaiennettu ja kuuliainen. Kaikkien kolmen teoksen hahmoja kuvataan modernin ajan uhreina. Heiltä puuttuu mekanismi, jolla he voisivat käsitellä kokonaisuuksia. Modernin ajan hahmojen elämä on lopulta kuin tanssia tulivuoren päällä - epävarmaa ja riskialtista.

The Learning Component of Dynamic Allocation Indices

For a multiarmed bandit problem with exponential discounting the optimal allocation rule is defined by a dynamic allocation index defined for each arm on its space. The index for an arm is equal to the expected immediate reward from the arm, with an upward adjustment reflecting any uncertainty about the prospects of obtaining rewards from the arm, and the possibilities of resolving those uncertainties by selecting that arm. Thus the learning component of the index is defined to be the difference between the index and the expected immediate reward. For two arms with the same expected immediate reward the learning component should be larger for the arm for which the reward rate is more uncertain. This is shown to be true for arms based on independent samples from a fixed distribution with an unknown parameter in the cases of Bernoulli and normal distributions, and similar results are obtained in other cases.

A robust approach to design a single facility layout plan in dynamic manufacturing environments using a permutation-based genetic algorithm

During the past few decades, developing efficient methods to solve dynamic facility layout problems has been focused on significantly by practitioners and researchers. More specifically meta-heuristic algorithms, especially genetic algorithm, have been proven to be increasingly helpful to generate sub-optimal solutions for large-scale dynamic facility layout problems. Nevertheless, the uncertainty of the manufacturing factors in addition to the scale of the layout problem calls for a mixed genetic algorithm–robust approach that could provide a single unlimited layout design. The present research aims to devise a customized permutation-based robust genetic algorithm in dynamic manufacturing environments that is expected to be generating a unique robust layout for all the manufacturing periods. The numerical outcomes of the proposed robust genetic algorithm indicate significant cost improvements compared to the conventional genetic algorithm methods and a selective number of other heuristic and meta-heuristic techniques.

Pleopod Cuticular Morphology as an Index of Moult Stage in the Ornate Rock Lobster, Panulirus ornatus (Fabricius 1789)

Seven discrete stages and substages of moulting in the ornate rock lobster, Panulirus ornatus, have been distinguished by microscopic examination of the cuticle and setae of the pleopods . The diagnostic features and the duration of each of the stages are described. Freezing did not visually alter the tissue features used to identify each moult stage. Pleopod morphology can reliably indicate whether a lobster has moulted within the previous 24 h or is within 72 h of the next ecdysis.

Assessment of prey overlap between a native (Polistes humilis) and an introduced (Vespula germanica) social wasp using morphology and phylogenetic analyses of 16S rDNA

In newly invaded communities, interspecific competition is thought to play an important role in determining the success of the invader and its impact on the native community. In southern Australia, the native Polistes humilis was the predominant social wasp prior to the arrival of the exotic Vespula germanica (Hymenoptera: Vespidae). Both species forage for similar resources (water, pulp, carbohydrate and protein prey), and concerns have arisen about potential competition between them. The aim of this study was to identify the protein foods that these wasps feed on. As many prey items are masticated by these wasps to the degree that they cannot be identified using conventional means, morphological identification was complemented by sequencing fragments of the mitochondrial 16S rRNA gene. GenBank searches using blast and phylogenetic analyses were used to identify prey items to at least order level. The results were used to construct complete prey inventories for the two species. These indicate that while P. humilis is restricted to feeding on lepidopteran larvae, V. germanica collects a variety of prey of invertebrate and vertebrate origin. Calculated values of prey overlap between the two species are used to discuss the implications of V. germanica impacting on P. humilis. Results obtained are compared to those gained by solely 'conventional' methods, and the advantages of using DNA-based taxonomy in ecological studies are emphasized.

Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242

A new method of modeling material behavior which accounts for the dynamic metallurgical processes occurring during hot deformation is presented. The approach in this method is to consider the workpiece as a dissipator of power in the total processing system and to evaluate the dissipated power co-contentJ = ∫o σ ε ⋅dσ from the constitutive equation relating the strain rate (ε) to the flow stress (σ). The optimum processing conditions of temperature and strain rate are those corresponding to the maximum or peak inJ. It is shown thatJ is related to the strain-rate sensitivity (m) of the material and reaches a maximum value(J max) whenm = 1. The efficiency of the power dissipation(J/J max) through metallurgical processes is shown to be an index of the dynamic behavior of the material and is useful in obtaining a unique combination of temperature and strain rate for processing and also in delineating the regions of internal fracture. In this method of modeling, noa priori knowledge or evaluation of the atomistic mechanisms is required, and the method is effective even when more than one dissipation process occurs, which is particularly advantageous in the hot processing of commercial alloys having complex microstructures. This method has been applied to modeling of the behavior of Ti-6242 during hot forging. The behavior of α+ β andβ preform microstructures has been exam-ined, and the results show that the optimum condition for hot forging of these preforms is obtained at 927 °C (1200 K) and a strain rate of 1CT•3 s•1. Variations in the efficiency of dissipation with temperature and strain rate are correlated with the dynamic microstructural changes occurring in the material.

Depth profile composition studies of thin film CdS: Cu,S solar cells using XPS and AES

Surface composition and depth profile studies of hemiplated thin film CdS:CuzS solar cells have been carried out using x-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) techniques. These studies indicate that the junction is fairly diffused in the as-prepared cell. However, heat treatment of the cell at 210°C in air relatively sharpens the junction and improves the cell performance. Using the Cu(2p3p)/S(2p) ratio as well as the Cu(LVV)/(LMM) Auger intensity ratio, it can be inferred that the nominal valency of copper in the layers above the junction is Cut and it is essentially in the CUSS form. Copper signals are observed from layers deep down in the cell. These seem to appear mostly from the grain boundary region. From the observed concentration of Cd, Cu and S in these deeper layers and the Cu(LVV)/(LMM) ratio it appears that the signals from copper essentially originate partly from copper in CuS and partly from Cu2t trapped in the lattice. It is significant to note that the nominal valence state of copper changes rather abruptly from Cut to Cuz+ across the junction.

When film, fashion & interiors collide: Designing the After Darkly Graduate Fashion Show

In 2013 QUT Interior Design and Fashion Disciplines partnered to design the Catwalk for the QUT After Darkly Graduate Fashion Show. The ephemeral work (catwalk canopy and cinematic affects) was developed through collaboration between the authors based upon an undergraduate interior design unit ‘Filmic Interiors’ in which students were tasked with designing a fashion show. Filmic Interiors exploited the potential of film to influence, understand, and develop novel interior spaces through consideration of mise-en-scene, cinematic effects and atmospheric design strategies engaged by key film directors Jean Pierre Jeunet and Darren Aronofsky. The design outcome represents a hybridisation of student design proposals, contemplating both film and emerging collections from graduate fashion students. The work explored a number of iterations each testing material qualities and immaterial cinematic affects, as a means to develop new space. The process was led by experimentation undertaken by the designers through previous studio explorations surrounding the theme of ‘Strange Space’ and design practice ‘Making Strange’(Lindquist & Pytel, 2012). In doing so, the work paralleled the material formations of ‘obsessive collections’ and ‘making do’ evident in Jeunet’s scenography, rendering uncanny hybrid space (Ezra, 2008). Evocation of the immaterial found in much of director Aronofsky’s work, also became critical in the atmospheric experience intended for the show. This paper explores the process of collaboration and material experimentation in design, approached through a filmic lens. It provides insight into what happens when one enters into what can be termed an ‘ecology of production’, whereby the experimental making becomes the collaborative agent between designers, disciplines, and between stage and spectators. Finally it underlines the importance of ‘finding the work’ through material making and testing rather than through more controlled formalistic responses.

Three new Lasiodiplodia spp. from the tropics, recognized based on DNA sequence comparisons and morphology

Botryosphaeria rhodina (anamorph Lasiodiplodia theobromae) is a common endophyte and opportunistic pathogen on more than 500 tree species in the tropics and subtropics. During routine disease surveys of plantations in Australia and Venezuela several isolates differing from L. theobromae were identified and subsequently characterized based upon morphology and ITS and EF1-a nucleotide sequences. These isolates grouped into three strongly supported clades related to but different from the known taxa, B. rhodina and L. gonubiensis, These have been described here as three new species L. venezuelensis sp. nov., L. crassispora sp. nov. and L. rubropurpurea sp. nov. The three could be distinguished easily from each other and the two described species of Lasiodiplodia, thus confirming phylogenetic separations. Furthermore all five Lasiodiplodia spp. now recognized separated from Diplodia spp. and Dothiorella spp. with 100% bootstrap support.

Phosphorus nutrition and tolerance of cotton to water stress I. Seed cotton yield and leaf morphology

Seed cotton yield and morphological changes in leaf growth were examined under drying soil with different phosphorus (P) concentrations in a tropical climate. Frequent soil drying is likely to induce a decrease in nutrients particularly P due to reduced diffusion and poor uptake, in addition to restrictions in available water, with strong interactive effects on plant growth and functioning. Increased soil P in field and in-ground soil core studies increased the seed cotton yield and related morphological growth parameters in a drying soil, with hot (daily maximum temperature >33°C) and dry conditions (relative humidity, 25% to 35%), particularly during peak boll formation and filling stage. The soil water content in the effective rooting zone (top 0.4 m) decreased to -1.5 MPa by day 5 of the soil drying cycle. However, the increased seed cotton yield for the high-P plants was closely related to increasing leaf area with increased P supply. Plant height, leaf fresh mass and leaf area per plant were positively related to the leaf P%, which increased with increasing P supply. Low P plants were lower in plant height, leaf area, and leaf tissue water in the drying soil. Individual leaf area and the water content of the fresh leaf (ratio of dry mass to fresh mass) were significantly dependent on leaf P%.

1H and 13C dynamic NMR studies of NN-diethyl N'-aryl thioureas

The variable temperature 1H and 13C NMR behaviour of two trisubstituted thioureas, namely N,N-diethyl N'-(2-thiazolyl) thiourea and N,N-diethyl N'-(3-pyridyl)thiourea has been investigated. The barrier to rotation of the diethylamino group has been obtained.

Morphology-based interslice interpolation on manual segmentations of joint bones and muscles in MRI

This paper presents a validation study on the application of a novel interslice interpolation technique for musculoskeletal structure segmentation of articulated joints and muscles on human magnetic resonance imaging data. The interpolation technique is based on morphological shape-based interpolation combined with intensity based voxel classification. Shape-based interpolation in the absence of the original intensity image has been investigated intensively. However, in some applications of medical image analysis, the intensity image of the slice to be interpolated is available. For example, when manual segmentation is conducted on selected slices, the segmentation on those unselected slices can be obtained by interpolation. We proposed a two- step interpolation method to utilize both the shape information in the manual segmentation and local intensity information in the image. The method was tested on segmentations of knee, hip and shoulder joint bones and hamstring muscles. The results were compared with two existing interpolation methods. Based on the calculated Dice similarity coefficient and normalized error rate, the proposed method outperformed the other two methods.

A fuzzy logic based dynamic wave model inversion algorithm for canal regulation

A fuzzy logic based centralized control algorithm for irrigation canals is presented. Purpose of the algorithm is to control downstream discharge and water level of pools in the canal, by adjusting discharge release from the upstream end and gates settings. The algorithm is based on the dynamic wave model (Saint-Venant equations) inversion in space, wherein the momentum equation is replaced by a fuzzy rule based model, while retaining the continuity equation in its complete form. The fuzzy rule based model is developed on fuzzification of a new mathematical model for wave velocity, the derivational details of which are given. The advantages of the fuzzy control algorithm, over other conventional control algorithms, are described. It is transparent and intuitive, and no linearizations of the governing equations are involved. Timing of the algorithm and method of computation are explained. It is shown that the tuning is easy and the computations are straightforward. The algorithm provides stable, realistic and robust outputs. The disadvantage of the algorithm is reduced precision in its outputs due to the approximation inherent in the fuzzy logic. Feed back control logic is adopted to eliminate error caused by the system disturbances as well as error caused by the reduced precision in the outputs. The algorithm is tested by applying it to water level control problem in a fictitious canal with a single pool and also in a real canal with a series of pools. It is found that results obtained from the algorithm are comparable to those obtained from conventional control algorithms.