970 resultados para decay
Resumo:
An easy experiment on the synthesis of 3,3-diphenyl-3H-naphtho[2,1-b]pyran and characterization of its photochromic behaviour is reported. Upon irradiation of an uncoloured toluene solution of 3,3-diphenyl-3H-naphtho[2,1-b]pyran with near UV light, an intense yellow colouration is produced due to the formation of two coloured open forms. When the irradiation source is removed the coloured open forms return to the uncoloured state. The analysis of the absorbance decay with time allows the determination of the discoloration rate constants of each open form. The reversibility of the photochromic phenomenon, well demonstrated by the exposure of the solution to sunlight for a few seconds, is particularly attractive to the students.
Resumo:
A new procedure to find the limiting range of the photomultiplier linear response of a low-cost, digital oscilloscope-based time-resolved laser-induced luminescence spectrometer (TRLS), is presented. A systematic investigation on the instrument response function with different signal input terminations, and the relationship between the luminescence intensity reaching the photomultiplier and the measured decay time are described. These investigations establish that setting the maximum intensity of the luminescence signal below 0.3V guarantees, for signal input terminations equal or higher than 99.7 ohm, a linear photomultiplier response.
Resumo:
Human papillomavirus (HPV) infections in mothers are important to consider since pregnancy may affect the outcome of the infection and the mother may transmit HPV to the child. This thesis is part of the 3-year Finnish Family HPV Study on HPV infection dynamics within 329 families. The presence of maternal HPV antibodies and HPV DNA in placenta, umbilical cord blood and breast milk was examined. In addition, genital and oral HR-HPV carriage was studied among mothers with one or two pregnancies. At enrollment, seropositivity to HPV 6, 11, 16, 18 and 45 was recorded in 53 %, 21 %, 35 %, 21 % and 9 % of the mothers, respectively. Age at sexual debut, number of sexual partners, a history of genital warts and antibodies to LR/HR-HPV predicted HR/LR-HPV-seropositivity. During follow-up 27 %, 14 %, 17 %, 17 % and 7 % of the mothers seroconverted to the tested HPV-types, respectively. Decay of HPV-antibodies was rare. The mother’s new pregnancy was of minor impact in the outcome of oral and cervical HR-HPV infections. HPV-DNA was present in 4.2 % and 3.5 % of the placentas and umbilical cord blood samples, and in 4.5 % and 19.7 % of the breast milk samples collected at day 3 and month 2 postpartum, respectively. HPV-positivity in placenta/cord blood was related to a history of abnormal pap-smears or genital warts, and raised the risk of the neonate being HPV-positive at birth. The mode of delivery did not predict the HPVstatus of neonate, placenta, or cord blood. HPV DNA in breast milk was associated with oral HPV status of the father, but not with HPV status of the neonate. The results indicate that exposure to HPV is common and that part of the exposure might take place already early in life. Contrary to the common claim, pregnancy is not a risk factor for HPV.
Resumo:
This paper presents the synthesis of the coordination polymers ∞[Ln(DPA)(HDPA)] (DPA=2,6-pyridinedicarboxylate; Ln= Tb and Gd), their structural and spectroscopic properties. The structural study reveals that the ∞[Ln(DPA)(HDPA)] has a single Ln+3 ion coordinated with two H2DPA ligands in tridentade coordination mode, while two others H2DPA establish a syn-bridge with a symmetry-related Ln3+, forming a two-dimensional structure. The spectroscopic studies show that ∞[Tb(DPA)(HDPA)] compound has high quantum yield (q x≈ 50.0%), due to the large contribution of radiative decay rate. Moreover triplet level is localized sufficiently over the emitter level 5D4 of theTb3+ ion, avoiding a retrotransference process between these states.
Resumo:
Over the last decade, evidences have been shown that the wood biodegradation by fungi is not only a result of the action of their enzymatic machinery but also of various low molecular weight non-enzymatic compounds, especially in fungi that promote brown and white decay, which in nature are the major wood decaying microorganisms. The present review focuses on the recent theories involving these low molecular weight compounds that act direct or synergistically with lignocellulolytic enzymes to attack the wood main macromolecular constituents, their relevance as potential degradative systems, in the overall wood biodegradation, and also outlines their potential biotechnological applications.
Resumo:
The spectroscopic behavior of thioxanthone and benzil (diphenylethanedione or dibenzoyl) in the ionic liquid [bmim.PF6] has been investigated employing the laser flash photolysis technique. Triplet-triplet absorption spectra for these carbonyl compounds in [bmim.PF6] are similar to those observed in organic solvents. The triplet lifetime for thioxanthone in desogygenated samples is very long (71 μs), whereas in oxygen-saturated solution is 500 ns, which indicates the low oxygen solubility in this solvent. For benzil, lifetimes of 10 μs in [bmim.PF6] and 3.8 μs in acetonitrile were obtained. The decay for triplet thioxanthone and benzil follows a clear first order kinetics in [bmim.PF6], from which one can conclude that triplet-triplet annihilation is not an important decay process in this solvent.
Resumo:
A software based in the Monte Carlo method have been developed aiming the teaching of important cases of mechanisms found in luminescence and in excited states decay kinetics, including: multiple decays, consecutive decays and coupled systems decays. The Monte Carlo Method allows the student to easily simulate and visualize the luminescence mechanisms, focusing on the probabilities of the related steps. The software CINESTEX was written for FreeBASIC compiler; it assumes first-order kinetics and any number of excited states, where the pathways are allowed with probabilities assigned by the user.
Resumo:
Saponins are natural soaplike foam-forming compounds widely used in foods, cosmetic and pharmaceutical preparations. In this work foamability and foam lifetime of foams obtained from Ilex paraguariensis unripe fruits were analyzed. Polysorbate 80 and sodium dodecyl sulfate were used as reference surfactants. Aiming a better data understanding a linearized 4-parameters Weibull function was proposed. The mate hydroethanolic extract (ME) and a mate saponin enriched fraction (MSF) afforded foamability and foam lifetime comparable to the synthetic surfactants. The linearization of the Weibull equation allowed the statistical comparison of foam decay curves, improving former mathematical approaches.
Resumo:
The electrochemistry of 2,2-dimethyl-(3H)-3-(N-3'-nitrophenylamino)naphtho[1,2- b]furan-4,5-dione ([Q]-PhNO2), on mercury was investigated. The first peak is consistent with a quasi-reversible one-electron reduction of the ortho-quinone, forming [Q-]-PhNO2, while the second one, bielectronic, corresponds to the simultaneous reduction of the latter radical to a dianion and the nitro group to a nitro radical anion. The second order rate constant, k disp, for the decay of [Q-]-PhNO2 is 15.188 x 10³ ± 827 mol"1 L s"1 and the t1/2 equals 0.06 s. E¹7Ic values for [Q]-PhNO2 and its precursor, nor-β-lapachone, are similar. The ease of semiquinone generation and its stability are parameters statistically relevant in the correlation biochemical/theoretical aspects.
Resumo:
A software based in the Monte Carlo method has been developed aiming the teaching of the Perrin´s model for static luminescence quenching. This software allows the student to easily simulate the luminescence decays of emissive molecules in the presence of quenching ones. The software named PERRIN was written for FreeBASIC compiler and it can be applied for systems where the molecules remain static during its excited state lifetime. The good agreement found between the simulations and the expected theoretical results shows that it can be used for the luminescence and excited states decay kinetic teaching.
Resumo:
This work involved the study of degradation of the herbicide bentazone in aqueous solution by different routes, in order to search a method that generates safe products to the environment. It was tested electrochemical polarization methods involving positive and negative potential, irradiation with UV light and deposition of TiO2 on the electrode surface, seeking a catalytic effect. After different times of degradation, aliquots were removed and the scan of molecular absorption spectrum of UV-Vis was performed. From the spectra decay of bentazone, the kinetics of different processes was accompanied and the rate constants were determined.
Resumo:
Seloste väitöskirjasta: The effect of lignin content and lignin modification on Norway spruce wood properties and decay resistance. Dissertationes Forestales 68.
Resumo:
Cyanate ion stability was studied in aqueous/ethanolic solutions, pH = 4.5 (CH3COOH/NaCH3COO), at different temperatures. Following the decay [(OCN)-] versus time, in the presence of excess C2H5OH, the rate constant for this reaction (k1) was calculated as (2.5 ± 0.3) x 10-4 s-1 at 25 ºC, for 0 < [C2H5OH] < 13.7 x 10-1 mol L-1. For [C2H5OH] > 2.0 mol L-1 a decrease in the numerical value of k1 was observed, reaching 5.2 x 10-5 s-1 when [CH3CH2OH] = 13.7 mol L-1. Variations in the kinetic parameter values ΔH1, ΔS1 and ΔG1 for the cyanate ion decay reaction were observed for solutions at different ethanol concentrations.
Resumo:
A software that includes both Stochastic and Molecular Dynamics procedures has been developed with the aim of visualizing the Stern-Volmer kinetic mechanism of dynamic luminescence quenching. The software allows the student to easily simulate and graphically visualize the molecular collisions, the molecular speed distributions, the luminescence decay curves, and the Stern-Volmer graphs. The software named "SternVolmer" is written for the FreeBASIC compiler and can be applied to dynamic systems where luminescent molecules, during their excited state lifetimes, are able to collide with quenching molecules (collisional quenching). The good agreement found between the simulations and the expected results shows that this software can be used as an effective teaching aid for the study of luminescence and kinetic decay of excited states.
Resumo:
This Master's thesis is devoted to semiconductor samples study using time-resolved photoluminescence. This method allows investigating recombination in semiconductor samples in order to develop quality of optoelectronic device. An additional goal was the method accommodation for low-energy-gap materials. The first chapter gives a brief intercourse into the basis of semiconductor physics. The key features of the investigated structures are noted. The usage area of the results covers saturable semiconductor absorber mirrors, disk lasers and vertical-external-cavity surface-emittinglasers. The experiment set-up is described in the second chapter. It is based on up-conversion procedure using a nonlinear crystal and involving the photoluminescent emission and the gate pulses. The limitation of the method was estimated. The first series of studied samples were grown at various temperatures and they suffered rapid thermal annealing. Further, a latticematched and metamorphically grown samples were compared. Time-resolved photoluminescence method was adapted for wavelengths up to 1.5 µm. The results allowed to specify the optimal substrate temperature for MBE process. It was found that the lattice-matched sample and the metamorphically grown sample had similar characteristics.