Nova formulação de iogurtes com extratos aquosos de funcho e camomila na substituição de aditivos químicos

Existe por parte dos consumidores uma tendência crescente na escolha de alimentos designados por mais saudáveis em que a presença em aditivos sintéticos é reduzida ou até mesmo ausente. Para melhorar a aparência e/ou propriedades dos alimentos a indústria recorre ao uso de aditivos sintéticos [1], no entanto, alguns autores têm apresentado alguma relação entre o consumo excessivo de alguns desses aditivos com efeitos adversos para a saúde do consumidor [2]. Para contornar esta problemática e ir ao encontro das expectativas dos consumidores, têm sido considerados os extratos naturais obtidos a partir de plantas como excelentes ingredientes naturais para a indústria alimentar como alternativas aos aditivos sintéticos [3]. Este trabalho teve como objetivo comparar os efeitos de antioxidantes naturais (extratos aquosos de Foeniculum vulgare Mill., funcho, e Matricaria recutita L., camomila, obtidos por decocção) com um aditivo sintético (sorbato de potássio, E202) utilizado em iogurtes. Neste trabalho, as amostras de Foeniculum vulgare Mill. (funcho) e Matricaria recutita L. (camomila) foram submetidas a uma extração por decocção. A sua caracterização química foi feita por HPLC-DAD-ESI/MS. As propriedades antioxidantes foram avaliadas através de diferentes ensaios in vitro (efeito captador de radicais livres, poder redutor e inibição da peroxidação lipídica), tal como as propriedades antimicrobianas (contra bactérias e fungos). A incorporação dos extratos foi feita em iogurtes e desta forma, foram preparados quatro grupos de amostras: iogurtes controlo (sem adição de qualquer aditivo), iogurtes com decocção de funcho, iogurtes com decocção de camomila e iogurtes com E202. As amostras foram avaliadas quanto à cor, pH e ao seu valor nutricional e potencial antioxidante. O estudo foi feito no tempo zero e após sete e catorze dias de armazenamento a 4ºC. Tal como podemos observar na Figura 1, a incorporação dos aditivos quer naturais quer sintéticos, não provocou alteração no aspeto visual quando comparado com a amostra controlo sem aditivos (A). Os resultados demonstram ainda que a introdução dos aditivos não provocou alterações significativas no pH e no valor nutricional dos iogurtes quando comparados com o controlo (Tabela 1). No entanto, esta incorporação conferiu propriedades antioxidantes aos iogurtes principalmente, pela adição do extrato de camomila (Figura 2). Estes resultados permitem-nos concluir que os extratos aquosos de funcho e camomila ricos em compostos fenólicos [4,5] podem representar uma alternativa aos conservantes sintéticos melhorando desta forma as propriedades funcionais dos iogurtes sem, no entanto, provocar alterações no perfil nutricional dos mesmos.

Gomphrena globosa L. como fonte alternativa de pigmentos naturais: caracterização de betacianidinas por HPLC-PDA-ESI/MS

A perceção, as opiniões e os desejos dos consumidores têm um enorme impacto na indústria alimentar. Na perceção visual, a cor torna-se um fator fundamental e, neste campo, os corantes alimentares assumem uma extrema importância. A cor pode ser considerada um dos atributos mais impressionantes dos géneros alimentícios, que influencia diretamente a preferência e a seleção dos consumidores[1]. Existem muitos corantes naturais utilizados na indústria alimentar, tais como carotenóides, antocianinas e betalaínas. As betalaínas incluem compostos com cores que vão do vermelho-violeta (betacianidinas) ao amarelo-laranja (betaxantinas). As betalaínas não têm sido tão extensamente estudadas como as antocianinas, mas possuem uma capacidade corante três-vezes maior. A única betalaína autorizada como corante natural deriva da beterraba(E-162)[2], mas existem outras fontes alternativas de betacianidinas ,como a que se apresenta neste trabalho: Gomphrenaglobosa L., vulgarmente designada por perpétua roxa.

Comparación de dos medios para congelar semen de toro y la influencia de tres tiempos de equilibración en la calidad post-descongelación

Los factores que influyen en la crioconservación de semen son la calidad, el manejo y los métodos de congelación (Lozano, 2009). La supervivencia y vitalidad espermática post-descongelación en la crioconservación está relacionada con los protocolos de procesamiento del semen y la dilución (Andrabi, 2009). Existen parámetros que permiten valorar la calidad seminal como la Motilidad Individual Progresiva (MIP), la Vitalidad Espermática (VE) y la tasa de Anormalidades en el semen descongelado que se ven afectados por los tiempos de equilibrio. Además la motilidad espermática y la vitalidad post-descongelación se pueden ver afectadas con el uso de los diferentes diluyentes tanto sintéticos (lecitina de soya) como orgánicos (yema de huevo). El objetivo fue comparar la eficacia del diluyente AndroMed® (TRIS + Lecitina de soya) y Triladyl® (TRIS + Yema de Huevo) y tres tiempos de equilibramiento de acuerdo a los protocolos establecidos en la crioconservación de semen de toro.

Evaluación de la expresión de enzimas hidrolíticas de pared celular en cloroplastos de tabaco

La alta capacidad del genoma del cloroplasto para integrar y expresar transgenes en altos niveles, hace de la tecnología transplastómica una buena opción para producir proteínas de interés. Este reporte presenta la expresión estable de una pectinasa (gen PelA), una β-glucosidasa (gen Bgl1), dos celulasas (genes CelA y CelB) y la primer expresión estable de una manganeso peroxidasa (gen MnP-2) en el genoma de cloroplastos de tabaco. Se construyeron seis vectores: pES4, pES5, pES6, pHM4, pHM5 y pHM6 derivados de pPRV111A conteniendo los genes sintéticos PelA, MnP- 2, Bgl1, CelA-CelB, CelA y CelB, respectivamente. Los genes se flanquearon por un promotor sintético del gen rrn16S y una secuencia sintética 3’UTR del gen rbcL. La integración en la región intergénica rrn16S y 3'rps12 se confirmó por análisis de Southern blot. El procesamiento estable de los transcritos se confirmó por un análisis de Northern blot. Se realizó un análisis enzimático para detectar la expresión y funcionalidad de las enzimas recombinantes, las plantas maduras mostraron mayor actividad comparado con plantas de tipo silvestre. Las plantas transplastómicas exhibieron 58.5% más actividad de pectinasa a pH neutro y a 60°C, mientras que manganeso peroxidasa mostró alta actividad a pH 6 y 65°C; en el caso de las celulasas, todas las enzimas mostraron mayor actividad a pH 5 (β-glucosidasa: 30.45 xviii U/mg, CelA-CelB 58 U/mg, CelA 49.10 U/mg y CelB 48.72 U/mg) a 40°C para β- glucosidasa y 65°C para celulasas. Las plantas transplastómicas mostraron un desarrollo similar a las plantas de tipo silvestre; sin embargo, la línea pHM4 mostró fenotipos variegados en hojas. Los análisis mostraron que los genes de enzimas hidrolíticas PelA, MnP-2, Bgl1, CelA-CelB, CelA y CelB pueden integrarse y expresarse en el genoma de cloroplastos con alta actividad; de este modo, debido a que una planta madura en promedio cuenta con ~ 470 g de biomasa, es posible producir 66,676.25 unidades de pectinasa, 21,715.46 unidades de manganeso peroxidasa, 338,081.0 unidades de celulasas A-B, 231,456.7 unidades de celulasa A, 206,669.8 unidades de celulasa B y 139,395.0 unidades de β-glucosidasa por planta. Este estudio sustenta información sobre métodos y estrategias de expresión de enzimas hidrolíticas con potencial aplicación biotecnológica utilizando plantas transplastómicas.

Nuevas aplicaciones sintéticas de pequeños heterocíclos. 2H-Azirinas fosforadas.

238 p.

Avaliação espectrofotométrica do manchamento de resinas odontológicas contendo nanopartículas

Composite resins have been subjected to structural modifications aiming at improved optical and mechanical properties. The present study consisted in an in vitro evaluation of the staining behavior of two nanohybrid resins (NH1 and NH2), a nanoparticulated resin (NP) and a microhybrid resin (MH). Samples of these materials were prepared and immersed in commonly ingested drinks, i.e., coffee, red wine and acai berry for periods of time varying from 1 to 60 days. Cylindrical samples of each resin were shaped using a metallic die and polymerized during 30 s both on the bottom and top of its disk. All samples were polished and immersed in the staining solutions. After 24 hours, three samples of each resin immersed in each solution were removed and placed in a spectrofotome ter for analysis. To that end, the samples were previously diluted in HCl at 50%. Tukey tests were carried out in the statistical analysis of the results. The results revealed that there was a clear difference in the staining behavior of each material. The nanoparticulated resin did not show better color stability compared to the microhybrid resin. Moreover, all resins stained with time. The degree of staining decreased in the sequence nanoparticulated, microhybrid, nanohybrid MH2 and MH1. Wine was the most aggressive drink followed by coffee and acai berry. SEM and image analysis revealed significant porosity on the surface of MH resin and relatively large pores on a NP sample. The NH2 resin was characterized by homogeneous dispersion of particles and limited porosity. Finally, the NH1 resin depicted the lowest porosity level. The results revealed that staining is likely related to the concentration of inorganic pa rticles and surface porosity

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Síntese e caracterização de espinélios a base de Cu, Fe e Cr para pigmentos cerâmicos

Inorganic pigment comprises a host lattice, which is part of the chromophore component (usually a transition metal cation) and possible components modifiers, which stabilize, add or restate the properties pigments. Among the materials with spinel, ferrites, and the chromite stand out, because they have broad technological importance in the area of materials, applicability, pigments, catalytic hydrogenation, thin film, ceramic tiles, among others. The present work, pigments containing CuFe2O4, CuCr2O4,e CuFeCrO4, were synthesized by a method that makes use of gelatin as organic precursor using their application to ceramic pigments. The pigments were characterized by X-ray diffraction (XRD), Infrared spectroscopy, scanning electron microscopy (SEM) spectroscopy in the UV-visible and Colorimetry. The results confirmed the feasibility of the synthetic route used, with respect to powders synthesized, there is the formation of spinel phase from 500°C, with an increase in crystallinity and the formation of other phases. The pigments were shown to be crystalline and the desired phases were obtained. The copper chromite have hues ranging from green to black according to the calcination temperature, while the copper chromite doped with iron had brownish. The ferrites showed copper color and darker brown to black, which may indicate an interesting factor because of the importance of black pigment

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Efeito da adição dos azocorantes DR73 e DB79 nas propriedades do poli(metacrilato de metila)

Currently new polymeric materials have been developed to replace other of traditionally materials classes. The use of dyes allows to expand and to diversify the applications in the polymeric materials development. In this work the behavior and ability of azo dyes Disperse Blue 79 (DB79) and Disperse Red 73 (DR73) on poly(methyl methacrylate) (PMMA) were studied. Two types of mixtures were used in the production of masterbatches: 1) rheometer 2) solution. Processing by extrusion-blow molding of PMMA was carried out in order to evaluate the applications of polymeric films. Thermal analysis were performed by thermogravimetry to evaluate polymer and azo dyes thermal stability. Colorimetric analysis were obtained through monitoring the spectral variations associated with sys/trans/anti azo dyes isomerization process Colorimetric data were treated and evaluated in accordance to the color system RGB and CIEL*ab, by monitoring the color change as function of time. Mechanical properties, characterized by tensile tests, were evaluated and correlated with the presence and content of azo dyes in the samples. Analyses by scanning electronic microscopy (SEM) were performed on the surfaces of samples to check the azo dye dispersion after the mixing process. It was concluded that the production of PMMA/azo dyes is possible and feasible, and the mixtures produced had synergy of properties for use in various applications

A forma do privilégio: renda, acessibilidade e densidade em Natal-RN

The aim of this work is to understand the morphological expression of ground occupation by the higher income population, by focusing on population distribution in accordance with income layers and demographical density, as well as topological accessibility (HILLIER and HANSON, 1984) resulting from the urban grid structure. It endeavors to identify a functional organizing principle regarding the intra-urban space of Natal capital city of the state of Rio Grande do Norte, the research focus. In order to achieve this, census data as well as syntactic data were utilized for mapping and spatial analysis of income patterns, topological accessibility and demographical density using Geographical Information System GIS. The organizing principle was named as the Form of Privilege, a pattern that concentrates or tends to concentrate wealth, topological accessibility and low demographical density. Attempting to assess its extent, beyond Natal, this principle was applied to other Brazilian northeastern capitals such as: Fortaleza, CE; Teresina, PI; Aracaju, SE; Recife, PE; and João Pessoa, PB. Findings point out that although the urban structures of these cities are not immune to the Form of Privilege, Natal is emblematic of this phenomenon, a fact that demonstrates the perverse character of its spatial process, which historically creates privileged areas within the city, by means of the appropriation of accessibility as well as of the many urban benesses that are related to it by higher income groups at the expense of the major part of the population, which though being the people mostly in need of the benefits originating from the urban form are excluded from them

DISEÑO DE UN INDICE SINTÉTICO ADELANTADO PARA LA INFLACIÓN: EL CASO DE COSTA RICA

Como parte del análisis del proceso inflacionario de cada país es de suma utilidad contar con diversas herramientas de pronóstico, entre las cuales se encuentra el indicador sintético adelantado de inflación, cuyo diseño es el objetivo principal del presente estudio.Se seleccionó en primera instancia el Indice de Precios al Consumidor como variable de referencia por ser el indicador oficial de inflación. Adicionalmente, se utilizó el Indice del Núcleo Inflacionario, el cual es una medición más depurada de inflación.Se analizaron treinta variables candidatas a formar parte del índice sintético. Se determinaron las series adelantadas al comparar las desviaciones cíclicas de cada una de ellas en comparación con las de las variables de referencia, utilizando el análisis gráfico, comovimientos y pruebas de causalidad.De esta forma se construyeron más de ventiseis posibles índices sintéticos, siguiendo la metodología propuesta por la National Bureau Economic Research (NBER); las ponderaciones de las variables se obtuvieron con la técnica de componentes principales.Estos indicadores se analizaron de acuerdo al tiempo promedio de adelanto y señales falsas y verdaderas siguiendo la regla de nueve meses arriba y abajo. Los resultados se confirmaron calculando los comovimientos entre los indicadores sintéticos y las variables de referencia.Los dos mejores índices sintéticos están compuestos por la emisión monetaria, el tipo de cambio, el Indice de precios al productor industrial y el Indice de Actividad Económica, el primero; mientras que el segundo contiene las mismas series excepto la emisión monetaria.Dado que estos indicadores se adelantan cinco meses, un cambio que presenten en su comportamiento es de esperar que se presente cinco meses después en la evolución de la tasa de inflación.Estos resultados vienen a complementar otras técnicas de pronóstico disponibles y tienen la ventaja de que son relativamente fáciles de actualizar mes a mes.Por último, además de que permitirá pronosticar puntos de giro (picos o valles) de la tasa de inflación, esta evidencia empírica contribuye a enriquecer futuros trabajos de investigación.

O tratamento convencional coagulação/floculação na remoção de nanopartículas metálicas

Dissertação de Mestrado, Engenharia do Ambiente, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Síntese de Biosílica em fibras de policaprolactona, produzidas por electrospinning, a partir da imobilização de Cys-tag Silicateína-α

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Avaliação da atividade fungicida de óleos essenciais e suas substâncias ativas no controlo de fungos de armazenamento

Mestrado em Engenharia Agronómica - Proteção da Plantas - Instituto Superior de Agronomia - UL