Micro- and mesoporous structures as drug delivery carriers for salicylic acid

The potential of salicylic acid (SA) encapsulated in porous materials as drug delivery carriers for cancer treatment was studied. Different porous structures, the microporous zeolite NaY, and the mesoporous SBA-15 and MCM-41 were used as hosts for the anti-inflammatory drug. Characterization with different techniques (FTIR, UV/vis, TGA, 1H NMR, and 13C CPMAS NMR) demonstrated the successful loading of SA into the porous hosts. The mesoporous structures showed to be very efficient to encapsulate the SA molecule. The obtained drug delivery systems (DDS) accommodated 0.74 mmol (341 mg/gZEO) in NaY and 1.07 mmol (493 mg/gZEO) to 1.23 mmol (566 mg/gZEO) for SBA-15 and MCM-41, respectively. Interactions between SA molecules and pore structures were identified. A fast and unrestricted liberation of SA at 10 min of the dissolution assay was achieved with 29.3, 46.6, and 50.1 µg/mL of SA from NaY, SBA-15, and MCM-41, respectively, in the in vitro drug release studies (PBS buffer pH 7.4, 37 °C). Kinetic modeling was used to determine the release patterns of the DDS. The porous structures and DDS were evaluated on Hs578T and MDA-MB-468 breast cancer cell lines viability. The porous structures are nontoxic to cancer cells. Cell viability reduction was only observed after the release of SA from MCM- 41 followed by SBA-15 in both breast cancer cell lines.

Nickel(II) complexes of bidentate N-N′ ligands containing mixed pyrazole, pyrimidine and pyridine aromatic rings as catalysts for ethylene polymerisation

This work describes the synthesis and characterisation of Ni(II) complexes of the following neutral bidentate nitrogen ligands containing pyrazole (pz), pyrimidine (pm) and pyridine (py) aromatic rings: 2-pyrazol-1-yl-pyrimidine (pzpm), 2-(4-methyl-pyrazol-1-yl)-pyrimidine (4-Mepzpm), 2-(4-bromo-pyrazol-1-yl)-pyrimidine (4-Brpzpm), 2-(3,5-dimethyl-pyrazol-1-yl)-pyrimidine (pz*pm), 2-pyrazol-1-yl-pyridine (pzpy) and bis(3,5-dimethylpyrazol-1-yl)phenylmethane (bpz*mph). The complexes [NiBr2(pzpm)] (1), [NiBr2(4-Mepzpm)] (2), [NiBr2(4-Brpzpm)] (3), [NiBr2(pz*pm)] (4), [NiBr2(pzpy)] (5) and [NiBr2(bpz*mph)] (6) were tested as catalysts for ethylene polymerisation, in the presence of the cocatalysts methylaluminoxane (MAO) or diethylaluminium chloride (AlEt2Cl), the catalyst systems 1-3/MAO showing moderate to high activities up to the temperature of 20 °C only in the presence of MAO, whereas 4-6/MAO revealed to be inactive. Other related Pd(II) complexes, already reported in previous works, such as [PdClMe(pzpm)], [PdClMe(pz*pm)], [PdClMe(pzpy)] and [PdClMe(bpz*mph)], also showed to be inactive in the polymerisation of ethylene, when activated by MAO or AlEt2Cl. Selected samples of polyethylene products were characterised by GPC/SEC, 1H and 13C NMR and DSC, showing to be low molecular weight polymers with Mn values ranging from ca. 550 to 1500 g mol−1 and unusually low dispersities of 1.2–1.7, with total branching degrees generally varying between 2 and 12%, melting temperatures from 40 to 120 °C and crystallinities from 40 to 70%.

Citric acid production by Y. lipolytica W29 from crude glycerol: strain improvement by mutagenesis

[Excerpt] Citric acid, an important and versatile organic acid extensively used in several industries, is originally produced by Aspergillus niger in submerged fermentation from molasses [1]. However, Yarrowia lipolytica have been studied and demonstrate a great potential as citric acid producer from several carbon sources [1–5] including crude glycerol, a low cost byproduct from the biodiesel industry [6]. The simultaneous production of the isomer isocitric acid is the major problem in using this yeast in the citric acid production. (...)

Simultaneous detection of cyclopiazonic acid and aflatoxin B1 by HPLC in methanol/water mobile phase

A simple procedure for the simultaneous detection of cyclopiazonic acid (CPA) and aflatoxin B1 from fungal extracts is presented, using a methanol and water mobile phase and fluorescence detection. This methodology has been tested with standard solutions of both mycotoxins CPA and Aflatoxin B1 and with methanolic extracts of Aspergillus section Flavi strains, previously characterized for their mycotoxin production profile. Previously available methodology required the use of two different chromatographic runs for these mycotoxins, with distinct columns and detectors (fluorescence detection with a post-column photochemical derivatization (PHRED) for aflatoxin B1 and UV detection for CPA). The proposed method detects both mycotoxins in a single run. Data from these assays will be presented and discussed.

New bio-strategies for ochratoxin A detoxification using lactic acid bacteria

The occurrence of mycotoxigenic moulds such as Aspergillus, Penicillium and Fusarium in food and feed has an important impact on public health, by the appearance of acute and chronic mycotoxicoses in humans and animals, which is more severe in the developing countries due to lack of food security, poverty and malnutrition. This mould contamination also constitutes a major economic problem due the lost of crop production. A great variety of filamentous fungi is able to produce highly toxic secondary metabolites known as mycotoxins. Most of the mycotoxins are carcinogenic, mutagenic, neurotoxic and immunosuppressive, being ochratoxin A (OTA) one of the most important. OTA is toxic to animals and humans, mainly due to its nephrotoxic properties. Several approaches have been developed for decontamination of mycotoxins in foods, such as, prevention of contamination, biodegradation of mycotoxins-containing food and feed with microorganisms or enzymes and inhibition or absorption of mycotoxin content of consumed food into the digestive tract. Some group of Gram-positive bacteria named lactic acid bacteria (LAB) are able to release some molecules that can influence the mould growth, improving the shelf life of many fermented products and reducing health risks due to exposure to mycotoxins. Some LAB are capable of mycotoxin detoxification. Recently our group was the first to describe the ability of LAB strains to biodegrade OTA, more specifically, Pediococcus parvulus strains isolated from Douro wines. The pathway of this biodegradation was identified previously in other microorganisms. OTA can be degraded through the hydrolysis of the amide bond that links the L-β-phenylalanine molecule to the ochratoxin alpha (OTα) a non toxic compound. It is known that some peptidases from different origins can mediate the hydrolysis reaction like, carboxypeptidase A an enzyme from the bovine pancreas, a commercial lipase and several commercial proteases. So, we wanted to have a better understanding of this OTA degradation process when LAB are involved and identify which molecules where present in this process. For achieving our aim we used some bioinformatics tools (BLAST, CLUSTALX2, CLC Sequence Viewer 7, Finch TV). We also designed specific primers and realized gene specific PCR. The template DNA used came from LAB strains samples of our previous work, and other DNA LAB strains isolated from elderberry fruit, silage, milk and sausages. Through the employment of bioinformatics tools it was possible to identify several proteins belonging to the carboxypeptidase family that participate in the process of OTA degradation, such as serine type D-Ala-D-Ala carboxypeptidase and membrane carboxypeptidase. In conclusions, this work has identified carboxypeptidase proteins being one of the molecules present in the OTA degradation process when LAB are involved.

Bio-detoxification of mycotoxins by lactic acid bacteria from different food matrices

Lactic acid bacteria (LAB) play a key role in the biopreservation of a wide range of fermented food products, such as yogurt, cheese, fermented milks, meat, fish, vegetables (sauerkraut, olives and pickles), certain beer brands, wines and silage, allowing their safe consumption, which gave to these bacteria a GRAS (Generally Recognised as Safe) status. Besides that, the use of LAB in food and feed is a promising strategy to reduce the exposure to dietary mycotoxins, improving their shelf life and reducing health risks, given the unique mycotoxin decontaminating characteristic of some LAB. Mycotoxins present carcinogenic, mutagenic, teratogenic, neurotoxic and immunosuppressive effects over animals and Humans, being the most important ochratoxin A (OTA), aflatoxins (AFB1), trichothecenes, zearalenone (ZEA), fumonisin (FUM) and patulin. In a previous work of our group it was observed OTA biodegradation by some strains of Pediococcus parvulus isolated from Douro wines. So, the aim of this study was to enlarge the screening of the biodetoxification over more mycotoxins besides OTA, including AFB1, and ZEA. This ability was checked in a collection of LAB isolated from vegetable (wine, olives, fruits and silage) and animal (milk and dairy products, sausages) sources. All LAB strains were characterized phenotypically (Gram, catalase) and genotypically. Molecular characterisation of all LAB strains was performed using genomic fingerprinting by MSP- PCR with (GTG)5 and csM13 primers. The identification of the isolates was confirmed by 16S rDNA sequencing. To study the ability of LAB strains to degrade OTA, AFB1 and ZEA, a MRS broth medium was supplemented with 2.0 g/mL of each mycotoxin. For each strain, 2 mL of MRS supplemented with the mycotoxins was inoculated in triplicate with 109 CFU/mL. The culture media and bacterial cells were extracted by the addition of an equal volume of acetonitrile/methanol/acetic acid (78:20:2 v/v/v) to the culture tubes. A 2 mL sample was then collected and filtered into a clean 2 mL vial using PP filters with 0.45 m pores. The samples were preserved at 4 °C until HPLC analysis. Among LAB tested, 10 strains isolated from milk were able to eliminate AFB1, belonging to Lactobacillus casei (7), Lb. paracasei (1), Lb. plantarum (1) and 1 to Leuconostoc mesenteroides. Two strains of Enterococcus faecium and one of Ec. faecalis from sausage eliminated ZEA. Concerning to strains of vegetal origin, one Lb. plantarum isolated from elderberry fruit, one Lb. buchnerii and one Lb. parafarraginis both isolated from silage eliminated ZEA. Other 2 strains of Lb. plantarum from silage were able to degrade both ZEA and OTA, and 1 Lb. buchnerii showed activity over AFB1. These enzymatic activities were also verified genotypically through specific gene PCR and posteriorly confirmed by sequencing analysis. In conclusion, due the ability of some strains of LAB isolated from different sources to eliminate OTA, AFB1 and ZEA one can recognize their potential biotechnological application to reduce the health hazards associated with these mycotoxins. They may be suitable as silage inoculants or as feed additives or even in food industry.

Optimization of peptide nucleic acid fluorescence in situ hybridization (PNA-FISH) for the detection of bacteria: the effect of pH, dextran sulfate and probe concentration

Fluorescence in situ hybridization (FISH) is a molecular technique widely used for the detection and characterization of microbial populations. FISH is affected by a wide variety of abiotic and biotic variables and the way they interact with each other. This is translated into a wide variability of FISH procedures found in the literature. The aim of this work is to systematically study the effects of pH, dextran sulfate and probe concentration in the FISH protocol, using a general peptide nucleic acid (PNA) probe for the Eubacteria domain. For this, response surface methodology was used to optimize these 3 PNA-FISH parameters for Gram-negative (Escherichia coli and Pseudomonas fluorescens) and Gram-positive species (Listeria innocua, Staphylococcus epidermidis and Bacillus cereus). The obtained results show that a probe concentration higher than 300 nM is favorable for both groups. Interestingly, a clear distinction between the two groups regarding the optimal pH and dextran sulfate concentration was found: a high pH (approx. 10), combined with lower dextran sulfate concentration (approx. 2% [w/v]) for Gram-negative species and near-neutral pH (approx. 8), together with higher dextran sulfate concentrations (approx. 10% [w/v]) for Gram-positive species. This behavior seems to result from an interplay between pH and dextran sulfate and their ability to influence probe concentration and diffusion towards the rRNA target. This study shows that, for an optimum hybridization protocol, dextran sulfate and pH should be adjusted according to the target bacteria.

Aromatic amines sources, environmental impact and remediation

Aromatic amines are widely used industrial chemicals as their major sources in the environment include several chemical industry sectors such as oil refining, synthetic polymers, dyes, adhesives, rubbers, perfume, pharmaceuticals, pesticides and explosives. They result also from diesel exhaust, combustion of wood chips and rubber and tobacco smoke. Some types of aromatic amines are generated during cooking, special grilled meat and fish, as well. The intensive use and production of these compounds explains its occurrence in the environment such as in air, water and soil, thereby creating a potential for human exposure. Since aromatic amines are potential carcinogenic and toxic agents, they constitute an important class of environmental pollutants of enormous concern, which efficient removal is a crucial task for researchers, so several methods have been investigated and applied. In this chapter the types and general properties of aromatic amine compounds are reviewed. As aromatic amines are continuously entering the environment from various sources and have been designated as high priority pollutants, their presence in the environment must be monitored at concentration levels lower than 30 mg L1, compatible with the limits allowed by the regulations. Consequently, most relevant analytical methods to detect the aromatic amines composition in environmental matrices, and for monitoring their degradation, are essential and will be presented. Those include Spectroscopy, namely UV/visible and Fourier Transform Infrared Spectroscopy (FTIR); Chromatography, in particular Thin Layer (TLC), High Performance Liquid (HPLC) and Gas chromatography (GC); Capillary electrophoresis (CE); Mass spectrometry (MS) and combination of different methods including GC-MS, HPLC-MS and CE-MS. Choosing the best methods depend on their availability, costs, detection limit and sample concentration, which sometimes need to be concentrate or pretreated. However, combined methods may give more complete results based on the complementary information. The environmental impact, toxicity and carcinogenicity of many aromatic amines have been reported and are emphasized in this chapter too. Lately, the conventional aromatic amines degradation and the alternative biodegradation processes are highlighted. Parameters affecting biodegradation, role of different electron acceptors in aerobic and anaerobic biodegradation and kinetics are discussed. Conventional processes including extraction, adsorption onto activated carbon, chemical oxidation, advanced oxidation, electrochemical techniques and irradiation suffer from drawbacks including high costs, formation of hazardous by-products and low efficiency. Biological processes, taking advantage of the naturally processes occurring in environment, have been developed and tested, proved as an economic, energy efficient and environmentally feasible alternative. Aerobic biodegradation is one of the most promising techniques for aromatic amines remediation, but has the drawback of aromatic amines autooxidation once they are exposed to oxygen, instead of their degradation. Higher costs, especially due to power consumption for aeration, can also limit its application. Anaerobic degradation technology is the novel path for treatment of a wide variety of aromatic amines, including industrial wastewater, and will be discussed. However, some are difficult to degrade under anaerobic conditions and, thus, other electron acceptors such as nitrate, iron, sulphate, manganese and carbonate have, alternatively, been tested.

Study of the retinoic acid regulated genes in the rodent hypothalamus controlling growth and appetite and the potential for the epigenetic control

Dissertação de mestrado em Bioquímica (área de especialização em Biomedicina)

Development of a poly(L-Lactic acid) based drug release system

Dissertação de mestrado em Biofísica e Bionanossistemas

Malolactic fermentation in winemaking: evaluation of operational parameters

Dissertação de mestrado em Bioengenharia

Aproximación al manejo de Nemátodos Fitófagos de los genéros nacobbus y meloidogyne en la Provincia de Córdoba: cultivos hortícolas y aromáticos. Approach to the management of phytophagous nematodes of de genera nacobbus and meloidogyne in the province of Córdoba: horticultural and aromatic crops.

El proyecto que se propone es continuación de investigaciones relacionadas con dos géneros de nematodos fitófagos de interés para cultivos hortícolas (Nacobbus y Meloidogyne) y plantas aromáticas (Meloidogyne) en la Provincia de Córdoba. Hasta el momento, los conocimientos sobre estos parásitos son limitados, de allí la justificación del tema propuesto. Se realizarán muestreos de los citados cultivos, desarrollados a campo y bajo cubierta, para identificar poblaciones de esos nematodos perjudiciales. Se caracterizará morfológicamente poblaciones de N. aberrans con el objeto de consolidar criterios que permitan su reconocimiento. Se llevarán a cabo estudios de relaciones nematodo-hospedador poniendo énfasis en aspectos para los cuales no existen antecedentes en el país. Por un lado, se evaluará el grado de susceptibilidad de diferentes cultivares de pimiento a la agresión de poblaciones de N. aberrans de reconocida patogenicidad para el cultivo. Por otro, se estudiará el efecto de la colonización de micorrizas arbusculares en raíces de tomate y pimiento, como agente que brindaría resistencia al ataque de N. aberrans. Cabe hacer notar que con respecto a la interacción del complejo representado por N. aberrans-planta-micorrizas no ha sido publicada información alguna a nivel mundial. La importancia del proyecto reside en la posibilidad de obtener datos originales, transferibles al sector de producción agrícola. Al mismo tiempo, contribuirá a definir estrategias alternativas de manejo de problemas ocasionados por nematodos fitófagos, basadas en aspectos biológicos y no en la utilización sistemática de agroquímicos contaminantes.

Producción de ácido Itacónico por Aspergillus terreus y de Ácido Hialurónico por Streptococcus equi subsp. equi en Biorreactores de Tanque Agitado. Production of Itaconic Acid by Aspergillus terreus and of Hyaluronic Acid by Sreptococcus equi subsp. equi in Stirred Tank Bioreactors.

El proyecto aborda el problema general de establecer una metodología para el cambio de escala de la producción de metabolitos en biorreactores de tanque agitado.En el desarrollo de procesos de producción de metabolitos a partir de microorganismos, el cambio de escala es particularmente complejo, dado que los microorganismos experimentan un continuo cambio en sus rutas metabólicas durante el período de producción. Esto hace que en el proceso del cambio de escala, las mayores dificultades se encuentren en el desarrollo del inóculo y problemas ocasionados por modificaciones en las características de transferencia de calor, masa y momento.Dentro de este contexto general se definen dos objetivos específicos. Estos son: el estudio de la producción de ácido itacónico por Aspergillus terreus y el de la producción de ácido hialurónico por Streptococcus equi. subsp. equi, con la finalidad de desarrollar una metodología de trabajo experimental y teórica que permita sistematizar el estudio del factibilidad técnico-económica de plantas de producción, vinculando la investigación del procesos a escala de laboratorio con la producción a mayor escala.La hipótesis de trabajo es que el estudio de la producción de Aspergillus terreus y de Streptococcus equi en un biorreactor de tanque agitado a escala de laboratorio permitirá establecer los parámetros que contribuirán a realizar el cambio de escala de su producción y esto será verificado experimentalmente.Los trabajos se realizarán utilizando un biorreactor a escala de laboratorio especialmente diseñado para este tipo de trabajo. Los resultados experimentales se interpretarán con técnicas estadísticas y matemáticas de diferente complejidad a efectos de establecer los criterios de cambio de escala y luego se realizarán experiencias en un biorreactor piloto con el objeto de verificar la metodología seleccionada.El desarrollo del proyecto permitirá:1.- obtener información técnica útil sobre la producción de ácido itacónico, el que tiene importantes aplicaciones en la industria del plástico. La producción por medio del Aspergillus terreus MJL05 se realizará utilizando glicerol como fuente de carbono, el que constituye el principal subproducto en los procesos de manufactura de biodiesel. De este modo se podrá analizar la factibilidad técnica de una ruta alternativa para emplear este subproducto.2.- obtener información técnica útil sobre la producción de ácido hialurónico, biopolímero de alto valor agregado con importantes aplicaciones en medicina, y contribuir así a realizar el cambio de escala de su producción.

Inducción sistémica de la biosintesis de metabolitos secundarios en plantas aromáticas mediada por rizobacterias. Systemic induction of secondary metablolites biosynthesis in aromatic plants by rhizobacteria.

El uso de microorganismos como inoculantes para incrementar la disponibilidad y toma de nutrientes por parte de los cultivos, es una nueva tecnología que ha dado buenos resultados, observándose un incremento en la emergencia, vigor, mayor desarrollo en la parte aérea y de raíces, registrándose aumentos considerables de los rendimientos en cultivos de interés comercial. Esto es debido a que los microorganismos PGPR (Plant Growth promoting rhizobacteria) sintetizan ciertas sustancias reguladoras del crecimiento como giberelinas, citoquininas y auxinas; las cuales estimulan la densidad y longitud de los pelos radicales, aumentando así la cantidad y longitud de las raíces de los vegetales. Así, se incrementa la capacidad de absorción de agua y nutrientes, haciendo que las plantas sean más vigorosas, productivas y tolerantes a condiciones climáticas adversas, como sequías o heladas. Otro factor benéfico es que ciertos microorganismos solubilizan nutrientes poco móviles en el suelo como el caso del fósforo, segundo nutriente, después del nitrógeno en importancia para el crecimiento de los cultivos. Estos microorganismos también tienen una función muy importante en el control natural de agentes patógenos, a través de la inducción del sistema de defensa en las plantas, aumentando su resistencia a enfermedades, a través de la producción de compuestos bacterianos como antibióticos y sideróforos. Los variados mecanismos mediante los cuales la acción PGPR se lleva a cabo no son plenamente conocidos y, por lo tanto, es necesario determinar con precisión su efecto particular en la biología de la planta beneficiada. Las plantas aromáticas y medicinales inoculadas con microorganismos (rizobacterias) registran un incremento en varios parámetros de crecimiento vegetal (peso fresco parte aérea, peso seco de raíz, número de hojas, etc) y en el rendimiento de aceite esencial (AE). El aumento de la síntesis, y la variación de los porcentajes relativos de los componentes principales de AE en plantas aromáticas, como efecto de la inoculación, podría considerarse como una respuesta defensiva de la planta frente a la colonización de microorganismos dado que varios AE poseen propiedades antimicrobianas. El incremento de estos metabolitos también se ha registrado como respuesta frente a la herbivoría. En el presente proyecto se propone dilucidar la existencia de una relación entre las defensas inducidas por rizobacterias con la producción de metabolitos secundarios en plantas aromaticas y medicinales. The use of microorganisms as inoculants to increase the availability and nutrient uptake by crops, is a new technology that has been successfully applied, with an increase in the emergence, vigor, greater development in the shoot and roots, recording significant increases in yields of crop with commercial interest. This is because microorganisms PGPR (Plant Growth Promoting rhizobacteria) synthesize certain growth regulating substances such as gibberellins, cytokinins and auxins, which stimulate the density and length of root hairs, increasing the number and length of roots. Thus, increase the capacity of absorbing water and nutrients, make the plants more vigorous, productive and tolerant to adverse climatic conditions such as drought or frost.Another beneficial factor is that some microorganisms solubilize nutrients mobile in the soil as the case of phosphorus, second nutrient after nitrogen important for plant growth. These organisms also have an important role in the natural control of pathogens through the induction of the plants defense system, increasing their resistance to disease through the production of compounds such as antibiotics and bacterial siderophores. The various mechanisms by which PGPR action takes place are not fully known and therefore it is necessary to accurately determine its particular effect on the biology of the specific plant benefit. Aromatic and medicinal plants inoculated with microorganisms (rhizobacteria) recorded an increase in several parameters of plant growth (shoot fresh weight, root dry weight, leaf number, etc) and essential oil yield (AE). The increase in the biosynthesis, and changes in the relative percentages of the main components of AE in aromatic plants inoculated with rizobacterias, could be regarded as a plant defense response against microbial colonization, since several AE have antimicrobial properties. The increase of these metabolites have also been recorded as a response to herbivory.

The use of forensic polycyclic aromatic hydrocarbon signatures and Compound Ratio Analysis Techniques (CORAT) for the source characterisation of petrogenic/pyrogenic environmental releases.

This study utilised recent developments in forensic aromatic hydrocarbon fingerprint analysis to characterise and identify specific biogenic, pyrogenic and petrogenic contamination. The fingerprinting and data interpretation techniques discussed include the recognition of: The distribution patterns of hydrocarbons (alkylated naphthalene, phenanthrene, dibenzothiophene, fluorene, chrysene and phenol isomers), • Analysis of “source-specific marker” compounds (individual saturated hydrocarbons, including n-alkanes (n-C5 through 0-C40) • Selected benzene, toluene, ethylbenzene and xylene isomers (BTEX), • The recalcitrant isoprenoids; pristane and phytane and • The determination of diagnostic ratios of specific petroleum / non-petroleum constituents, and the application of various statistical and numerical analysis tools. An unknown sample from the Irish Environmental Protection Agency (EPA) for origin characterisation was subjected to analysis by gas chromatography utilising both flame ionisation and mass spectral detection techniques in comparison to known reference materials. The percentage of the individual Polycyclic Aromatic Hydrocarbons (PAIIs) and biomarker concentrations in the unknown sample were normalised to the sum of the analytes and the results were compared with the corresponding results with a range of reference materials. In addition, to the determination of conventional diagnostic PAH and biomarker ratios, a number of “source-specific markers” isomeric PAHs within the same alkylation levels were determined, and their relative abundance ratios were computed in order to definitively identify and differentiate the various sources. Statistical logarithmic star plots were generated from both sets of data to give a pictorial representation of the comparison between the unknown sample and reference products. The study successfully characterised the unknown sample as being contaminated with a “coal tar” and clearly demonstrates the future role of compound ratio analysis (CORAT) in the identification of possible source contaminants.