Queensland's Smart State Initiative : a successful knowledge based urban development strategy

The chapter will set out to explain the KBUD and urban policy making processes in Queensland, Australia. This chapter will draw on providing a clear understanding on policy frameworks and relevant ICT applications of the Queensland ‘Smart State’ experience. The chapter is consisted of six sections. The first section following the introduction provides background information. The second section focuses on the KBUD processes in Queensland. The third section offers a comprehensive analysis of the ‘Queensland Smart State’ initiative, and it also identifies actors and goals of the agenda of Smart State experience. The fourth section reviews knowledge based development and ICT applications and policies of the Queensland Smart State and Brisbane Smart City experiences, and their impacts on Brisbane’s successful KBUD. The fifth section discusses knowledge hubs and ICT developments within the Brisbane metropolitan area. Then the chapter concludes with future trends and conclusion sections.

Exploring non-cancer pain conditions in a community sample : critiquing a current conceptual model of the acute to chronic pain transition and examining predictors of chronicity

This program of research examines the experience of chronic pain in a community sample. While, it is clear that like patient samples, chronic pain in non-patient samples is also associated with psychological distress and physical disability, the experience of pain across the total spectrum of pain conditions (including acute and episodic pain conditions) and during the early course of chronic pain is less clear. Information about these aspects of the pain experience is important because effective early intervention for chronic pain relies on identification of people who are likely to progress to chronicity post-injury. A conceptual model of the transition from acute to chronic pain was proposed by Gatchel (1991a). In brief, Gatchel’s model describes three stages that individuals who have a serious pain experience move through, each with worsening psychological dysfunction and physical disability. The aims of this program of research were to describe the experience of pain in a community sample in order to obtain pain-specific data on the problem of pain in Queensland, and to explore the usefulness of Gatchel’s Model in a non-clinical sample. Additionally, five risk factors and six protective factors were proposed as possible extensions to Gatchel’s Model. To address these aims, a prospective longitudinal mixed-method research design was used. Quantitative data was collected in Phase 1 via a comprehensive postal questionnaire. Phase 2 consisted of a follow-up questionnaire 3 months post-baseline. Phase 3 consisted of semi-structured interviews with a subset of the original sample 12 months post follow-up, which used qualitative data to provide a further in-depth examination of the experience and process of chronic pain from respondents’ point of view. The results indicate chronic pain is associated with high levels of anxiety and depressive symptoms. However, the levels of disability reported by this Queensland sample were generally lower than those reported by clinical samples and consistent with disability data reported in a New South Wales population-based study. With regard to the second aim of this program of research, while some elements of the pain experience of this sample were consistent with that described by Gatchel’s Model, overall the model was not a good fit with the experience of this non-clinical sample. The findings indicate that passive coping strategies (minimising activity), catastrophising, self efficacy, optimism, social support, active strategies (use of distraction) and the belief that emotions affect pain may be important to consider in understanding the processes that underlie the transition to and continuation of chronic pain.

ICT integration and teachers' confidence in using ICT for teaching and learning in Queensland state schools

Information and communication technology (ICT) curriculum integration is the apparent goal of an extensive array of educational initiatives in all Australian states and territories. However, ICT curriculum integration is neither value neutral nor universally understood. The literature indicates the complexity of rationales and terminology that underwrite various initiatives; various dimensions and stages of integration; inherent methodological difficulties; obstacles to integration; and significant issues relating to teacher professional development and ICT competencies (Jamieson-Proctor, Watson, & Finger, 2003). This paper investigates the overarching question: Are ICT integration initiatives making a significant impact on teaching and learning in Queensland state schools? It reports the results from a teacher survey that measures the quantity and quality of student use of ICT. Results from 929 teachers across all year levels and from 38 Queensland state schools indicate that female teachers (73% of the full time teachers in Queensland state schools in 2005) are significantly less confident than their male counterparts in using ICT with students for teaching and learning, and there is evidence of significant resistance to using ICT to align curriculum with new times and new technologies. This result supports the hypothesis that current initiatives with ICT are having uneven and less than the desired results system wide. These results require further urgent investigation in order to address the factors that currently constrain the use of ICT for teaching and learning.

A bridging transition technique for the combination of meshfree method with finite element method in 2D solids and structures

For certain continuum problems, it is desirable and beneficial to combine two different methods together in order to exploit their advantages while evading their disadvantages. In this paper, a bridging transition algorithm is developed for the combination of the meshfree method (MM) with the finite element method (FEM). In this coupled method, the meshfree method is used in the sub-domain where the MM is required to obtain high accuracy, and the finite element method is employed in other sub-domains where FEM is required to improve the computational efficiency. The MM domain and the FEM domain are connected by a transition (bridging) region. A modified variational formulation and the Lagrange multiplier method are used to ensure the compatibility of displacements and their gradients. To improve the computational efficiency and reduce the meshing cost in the transition region, regularly distributed transition particles, which are independent of either the meshfree nodes or the FE nodes, can be inserted into the transition region. The newly developed coupled method is applied to the stress analysis of 2D solids and structures in order to investigate its’ performance and study parameters. Numerical results show that the present coupled method is convergent, accurate and stable. The coupled method has a promising potential for practical applications, because it can take advantages of both the meshfree method and FEM when overcome their shortcomings.

Supporting fathers in the transition to parenthood

Knowledge of the experience of parenthood is usually from a woman’s perspective. The resulting outcome is that knowledge about the experience of fatherhood has been limited. Fathers are starting to change this situation by sharing their experience as is evidenced by the overall response of 267 fathers to this study. This paper focuses on the exploration of 22 men’s feelings and beliefs about fatherhood; and their expectations and views about parenting. The paper will also investigate how fathers’ antenatal expectations matched the reality of early family life including emotional well-being, attitudes to parenting, adjustment to family life and sources of support. The quantitative and qualitative data of the 22 fathers who responded to both the antenatal and postnatal questionnaires used within this paper are drawn from a larger Queensland survey of women and men during the antenatal and postnatal period.

Fear, trust and Aborigines : The historical experience of state institutions and current encounters in the health system

Troubled dynamics between residents of an Aboriginal town in Queensland and the local health system were established during colonisation and consolidated during those periods of Australian history where the policies of 'protection' (segregation), integration and then assimilation held sway. The status of Aboriginal health is, in part, related to interactions between the residents' current and historical experiences of the health and criminal justice systems as together these agencies used medical and moral policing to legitimate dispossession, marginalisation, institutionalisation and control of the residents. The punitive regulations and ethnocentric strategies used by these institutions are within the living memory of many of the residents or in the published accounts of preceding generations. This paper explores current residents' memories and experiences.

Service analysis : A critical assessment of the state of the art

The service-orientation paradigm has not only become prevalent in the software systems domain in recent years, but is also increasingly applied on the business level to restructure organisational capabilities. In this paper, we present the results of an extensive literature review of 30 approaches related to service identification and analysis for both domains. Based on the consolidation of a superset of comparison criteria for service-oriented methodologies found in related literature, we compare and evaluate the different characteristics of service engineering methods with a focus on service analysis. Although a close business and IT alignment is regarded as one of the core beneficial promises of service-orientation, our analysis suggests that there is a lack of unified, comprehensive methodology for service identification and analysis integrating and addressing both domains. Thus, we discuss how our results can inform directions for future research in this area.

Regulating Multi-National Corporations Through State-Based Laws : Problems with Enforcing Human Rights Under The Alien Tort Statute

Under the Alien Tort Statute United States of America (“America”) Federal Courts have the jurisdiction to hear claims for civil wrongs, committed against non-American citizens, which were perpetrated outside America’s national borders. The operation of this law has confronted American Federal Courts with difficulties on how to manage conflicts between American executive foreign policy and judicial interpretations of international law. Courts began to pass judgment over conduct which was approved by foreign governments. Then in 2005 the American Supreme Court wound back the scope of the Alien Tort Statute. This article will review the problems with the expansion of the Alien Tort Statute and the reasons for its subsequent narrowing.

Management of sharps in ambulance care : a state-wide survey of paramedic knowledge and reported practice

Paramedics are at high risk of exposure to infectious diseases because they frequently undertake procedures such as the use and disposal of sharps as components of everyday practice. While the literature demonstrates that the management of sharps is problematic across all health disciplines, there is a paucity of research examining sharps management practices in the Australian pre-hospital paramedic context. This study examines knowledge and practices of sharps control among paramedics in Queensland, Australia. A mail survey focusing on infection control knowledge and practices was sent to all clinical personnel of the Queensland Ambulance Service (QAS) (N = 2274). A total of 1258 surveys were returned, a response rate of 55.3%. Participants responded to 12 true/false statements on the management of sharps and three questions about recapping practices. Most respondents were knowledgeable about the correct management of sharps, with a mean of 11.28 (out of 12, SD = 1.32). When gauging reported practices, more than half (59.1%, n = 736) of participants reported recapping a needle, and 38.5% (n = 479) reported never having done so. These results reflect good knowledge of general management of sharps among respondents, but suggest deficits regarding reported practices. The results suggest that a comprehensive ambulance in-service education programme focusing particularly on sharps management is required. The study highlights the need for further research on sharps management practices in the field, identification of barriers to safe sharps practices in pre-hospital settings, and 'best practice' for translating good sharps management knowledge into practice.

Off-site Manufacture in Australia : Current State and Future Directions

Off-site manufacture (OSM) offers numerous benefits to all parties in the construction process. The uptake of OSM in Australia has, however, been limited. This limited uptake corresponds to similar trends in the UK and US, although the level of OSM there appears to be increasing. This project undertook three workshops — one each in Victoria, Queensland and Western Australia — and 18 interviews with key stakeholders to assist in identifying the general benefits and barriers to OSM uptake in the Australian construction industry. Seven case studies were also undertaken, involving construction projects that used OSM, ranging from civil projects through to residential. Each of these case studies has been analysed to identify what worked and what didn’t, and suggest the lessons to be learned from each project.

Analysing the internationalisation readiness of firms

The internationalisation of firms has gained much research attention since the 1970s. However, the behavioural aspect of firms’ during their pre-internationalisation phase has not been sufficiently explored. This research proposes that a pre-internationalisation focus would not only offer an additional perspective to the study of firm internationalisation but would also address the significant research gap in studies that are theoretically based around the Uppsala Model. This study views the development of a firm from its pre-internationalisation phase into an international firm in accordance with the Uppsala Model’s ‘state’ to ‘change’ aspect transition, with ‘internationalisation readiness’ established as the missing link between these two aspects. During the pre-internationalisation phase, a firm is exposed to a wide variety of internal and external stimuli that triggers an impulse for foreign market expansion. The perception of these stimuli and the attitudinal commitment taken by the firm’s decision-makers, as well as the firm’s resource capabilities and the moderating effect of lateral rigidity, are influential towards an internationalisation decision. This paper argues the significance of adopting the pre-internationalisation phase as a research platform and the importance of analysing firms’ internationalisation readiness. A method is proposed for the development of an Internationalisation Readiness Index that could be used for measuring a firm’s propensity to commence its first export operation.