Prevalence of papillary changes and folliculosis of the palpebral conjunctiva in asymptomatic Chinese children

Purpose To determine the prevalence of papillary changes of the upper palpebral conjunctiva and folliculosis of the lower palpebral conjunctiva in Chinese children with no history of contact lens wear. Method Ninety-nine subjects (aged 6–15 years old) who were interested in a myopia control study were screened for papillary changes and folliculosis of the palpebral conjunctiva. Photodocumentation was performed under white and blue light (after the application of fluorescein) with a yellow filter and the photographs were graded by a group of practitioners according to a pre-set grading scale. Analysis was performed with the subjects divided into groups according to gender and age. Results More than 48% of the subjects had clinically significant (≥Grade 3) papillary changes in the upper palpebral conjunctiva. The prevalence of significant folliculosis in the lower lid was about 33%. The prevalence of significant papillary changes and folliculosis were similar between genders. No differences were observed between younger (age ≤ 10 years old) and older (age > 10 years old) in papillary changes but younger subjects showed a higher prevalence of folliculosis. Conclusions The prevalences of clinically significant papillary changes and folliculosis of unknown aetiology are high in Chinese children.

Development and review of vignettes representing older people with cognitive impairment

This paper describes a process undertaken to develop and review five clinical vignettes to be used in geriatric nursing educational research. The purpose of this process was to provide valid depictions of delirium and its subtypes and distinguish delirium from dementia. Five vignettes depicting hospital bedside interactions between nursing staff, family, and an older patient who displayed signs of one of the following conditions: delirium (hyper and hypo-active types respectively), dementia, or delirium (both types) superimposed on dementia were constructed. Vignette accuracy and reliability was established using a multistage process that culminated in formal review by a group of ten international nursing and medical delirium experts. The final five vignettes accurately depicted the given scenario as agreed by the experts and were at an appropriate level of simplicity and clarity. Given the increased interest in vignettes for both nursing research and educational purposes, the described method of vignette development and review has the ability to assist other vignette developers in creating reliable representations of their desired clinical scenarios.

Protective factors associated with young passenger intervening in risky driving situations

While the negative influence of passengers on driving is usually studied, young passengers may protect against young drivers’ crash involvement by speaking out and trying to stop unsafe driving behavior. This study sought to examine psychosocial constructs of young passengers who are likely to intervene in their friends’ risky driving. Method: University students aged 17 to 25 years who were single (n = 123) or in a romantic relationship (n = 130) completed an online survey measuring protective factors. Results: The combination of individual, friend and (for participants in a relationship) romantic partner protective factors predicted self-reported passenger intervening intentions. Impact on Industry: Since peer passengers often increase young drivers’ crash risk, research on passenger intervening has significant implications for road safety strategies. The findings provide support for the operationalization of protective factors in strategies that target passenger intervening behavior.

A psychosocial model of young adult passengers’ intervening in unsafe driving of their friends

Young adults are over-represented in motor vehicle crashes and the carrying of same passengers puts them at greater risk of crashing. The current study examined characteristics of the passengers who might play a positive role in reducing friends’ crashes by actively engaging in strategies to protect such friends. A psychosocial theoretical model of prosocial behavior including self-process and contextual cues explained intervening behavior among primarily novice driver college students (n=242) with the exception of the self-process, perspective taking. The results of this study provide support for countermeasure development that accounts for the positive role of peers to increase road safety, and reduce the incidence of crashes, among young adults.

A study on the effects of routing symbol design on process model comprehension

Process modeling grammars are used to create models of business processes. In this paper, we discuss how different routing symbol designs affect an individual's ability to comprehend process models. We conduct an experiment with 154 students to ascertain which visual design principles influence process model comprehension. Our findings suggest that design principles related to perceptual discriminability and pop out improve comprehension accuracy. Furthermore, semantic transparency and aesthetic design of symbols lower the perceived difficulty of comprehension. Our results inform important principles about notational design of process modeling grammars and the effective use of process modeling in practice.

Atmospheric deposition as a source of heavy metals in urban stormwater

Atmospheric deposition is one of the most important pathways of urban stormwater pollution. Atmospheric deposition which can be in the form of either wet or dry deposition have distinct characteristics in terms of associated particulate sizes, pollutant types and influential parameters. This paper discusses the outcomes of a comprehensive research study undertaken to identify important traffic characteristics and climate factors such as antecedent dry period and rainfall characteristics which influences the characteristics of wet and dry deposition of solids and heavy metals. The outcomes confirmed that Zinc (Zn) is correlated with traffic volume whereas Lead (Pb), Cadmium (Cd), Nickel (Ni), and Copper (Cu) are correlated with traffic congestion. Consequently, reducing traffic congestion will be more effective than reducing traffic volume for improving air quality particularly in relation to Pb, Cd, Ni, and Cu. Zn was found to have the highest atmospheric deposition rate compared to other heavy metals. Zn in dry deposition is associated with relatively larger particle size fractions (>10 µm), whereas Pb, Cd, Ni and Cu are associated with relatively smaller particle size fractions (<10 µm). The analysis further revealed that bulk (wet plus dry) deposition which is correlated with rainfall depth and contains a relatively higher percentage of smaller particles compared to dry deposition which is correlated with the antecedent dry period. As particles subjected to wet deposition are smaller, they disperse over a larger area from the source of origin compared to particles subjected to dry deposition as buoyancy forces become dominant for smaller particles compared to the influence of gravity. Furthermore, exhaust emission particles were found to be primarily associated with bulk deposition compared to dry deposition particles which mainly originate from vehicle component wear.

Benchmarking knowledge-based urban development performance : Results from the international comparison of Helsinki

In the era of a global knowledge economy, urban regions that seek to increase their competitive edge, become destinations for talent and investment and provide prosperity and high quality of life to their inhabitants have little chance of achieving these goals without forming effective knowledge-based urban development strategies. The research reported in this paper aims to address the questions of how a knowledge-based urban development performance measurement can be undertaken and the value contribution of such measurement. The paper focuses on the city of Helsinki. This empirical study analytically investigates Helsinki’s performance from the lens of knowledge-based urban development by comparing this urban region with eight international competitors, Boston, San Francisco, Birmingham, Manchester, Melbourne, Sydney, Toronto, and Vancouver. The results of the study not only reveal a clearer understanding of Helsinki’s benchmarked performance and competitive edge considering the regional policy context along with strategic directions in strengthening its international standing and competitiveness but also provide useful insights for other urban regions that aspire to such development.

Influence of Rainfall and Catchment Characteristics on Urban Stormwater Quality

The accuracy and reliability of urban stormwater quality modelling outcomes are important for stormwater management decision making. The commonly adopted approach where only a limited number of factors are used to predict urban stormwater quality may not adequately represent the complexity of the quality response to a rainfall event or site-to-site differences to support efficient treatment design. This paper discusses an investigation into the influence of rainfall and catchment characteristics on urban stormwater quality in order to investigate the potential areas for errors in current stormwater quality modelling practices. It was found that the influence of rainfall characteristics on pollutant wash-off is step-wise based on specific thresholds. This means that a modelling approach where the wash-off process is predicted as a continuous function of rainfall intensity and duration is not appropriate. Additionally, other than conventional catchment characteristics, namely, land use and impervious surface fraction, other catchment characteristics such as impervious area layout, urban form and site specific characteristics have an important influence on both, pollutant build-up and wash-off processes. Finally, the use of solids as a surrogate to estimate other pollutant species was found to be inappropriate. Individually considering build-up and wash-off processes for each pollutant species should be the preferred option.

Eigenvoice modeling for cross likelihood ratio based speaker clustering : a Bayesian approach

This paper proposes the use of Bayesian approaches with the cross likelihood ratio (CLR) as a criterion for speaker clustering within a speaker diarization system, using eigenvoice modeling techniques. The CLR has previously been shown to be an effective decision criterion for speaker clustering using Gaussian mixture models. Recently, eigenvoice modeling has become an increasingly popular technique, due to its ability to adequately represent a speaker based on sparse training data, as well as to provide an improved capture of differences in speaker characteristics. The integration of eigenvoice modeling into the CLR framework to capitalize on the advantage of both techniques has also been shown to be beneficial for the speaker clustering task. Building on that success, this paper proposes the use of Bayesian methods to compute the conditional probabilities in computing the CLR, thus effectively combining the eigenvoice-CLR framework with the advantages of a Bayesian approach to the diarization problem. Results obtained on the 2002 Rich Transcription (RT-02) Evaluation dataset show an improved clustering performance, resulting in a 33.5% relative improvement in the overall Diarization Error Rate (DER) compared to the baseline system.

Non-aqueous synthesis of hexagonal ZnO nanopyramids : gas sensing properties

Zinc oxide (ZnO) nanopyramids were synthesized by a one-pot route in a non-aqueous and surfactantfree environment. The synthesized metal oxide was characterized using SEM, XRD, and TEM to investigate the surface morphology and crystallographic phase of the nanostructures. It was observed that the ZnO nanopyramids were of uniform size and symmetrical, with a hexagonal base and height of ∼100 nm. Gas sensing characterization of the ZnO nanopyramids when deposited as thin-film onto conductometric transducers were performed towards NOx and C2H5OH vapor of different concentrations over a temperature range of 22–350 ◦C. It was observed that the sensors responded towards NO2 (10 ppm) and C2H5OH(250 ppm) analytes best at temperatures of 200 and 260 ◦C with a sensor response of 14.5 and 5.72, respectively. The sensors showed satisfactory sensitivity, repeatability as well as fast response and recovery towards both the oxidizing and the reducing analyte. The good performance was attributed to the low amount of organic impurities, large surface-to-volume ratio and high crystallinity of the solvothermally synthesized ZnO nanopyramids.

Behaviour and design of cold-formed steel beams subject to lateral-torsional buckling at elevated temperatures

Cold-formed steel beams are increasingly used as floor joists and bearers in buildings and often their behaviour and moment capacities are influenced by lateral-torsional buckling. With increasing usage of cold-formed steel beams their fire safety design has become an important issue. Fire design rules are commonly based on past research on hot-rolled steel beams. Hence a detailed parametric study was undertaken using validated finite element models to investigate the lateral-torsional buckling behaviour of simply supported cold-formed steel lipped channel beams subjected to uniform bending at uniform elevated temperatures. The moment capacity results were compared with the predictions from the available ambient temperature and fire design rules and suitable recommendations were made. European fire design rules were found to be over-conservative while the ambient temperature design rules could not be used based on single buckling curve. Hence a new design method was proposed that includes the important non-linear stress-strain characteristics observed for cold-formed steels at elevated temperatures. Comparison with numerical moment capacities demonstrated the accuracy of the new design method. This paper presents the details of the parametric study, comparisons with current design rules and the new design rules proposed in this research for lateral-torsional buckling of cold-formed steel lipped channel beams at elevated temperatures.

Towards Bayesian experimental design for nonlinear models that require a large number of sampling times

The use of Bayesian methodologies for solving optimal experimental design problems has increased. Many of these methods have been found to be computationally intensive for design problems that require a large number of design points. A simulation-based approach that can be used to solve optimal design problems in which one is interested in finding a large number of (near) optimal design points for a small number of design variables is presented. The approach involves the use of lower dimensional parameterisations that consist of a few design variables, which generate multiple design points. Using this approach, one simply has to search over a few design variables, rather than searching over a large number of optimal design points, thus providing substantial computational savings. The methodologies are demonstrated on four applications, including the selection of sampling times for pharmacokinetic and heat transfer studies, and involve nonlinear models. Several Bayesian design criteria are also compared and contrasted, as well as several different lower dimensional parameterisation schemes for generating the many design points.

Reconceptualising mega project success in Australian Defence : recognising the importance of value co-creation

Recent literature in project management has urged a re-conceptualisation of projects as a value co-creation process. Contrary to the traditional output-focused project methodology, the value creation perspective argues for the importance of creating new knowledge, processes, and systems for suppliers and customers. Stakeholder involvement is important in this new perspective, as the balancing of competing needs of stakeholders in mega projects becomes a major challenge in managing the value co-creation process. In this study we present interview data from three Australian defence mega projects to demonstrate that senior executives have a more complex understanding of project success than traditional iron triangle measures. In these mega defence projects, customers and other stakeholders actively engage in the value creation process, and over time both content and process value are created to increase defence and national capability. Value created and captured during and post projects are the key to true success.

Consumer Internet purchasing behaviour in Chile

Despite the potential for e-commerce growth in Latin America, studies investigating factors that influence consumers’ Internet purchasing behavior are very limited. This research addresses this limitation with a consumer centric study in Chile using the Theory of Reasoned Action. The study examines Chilean consumers’ beliefs, perceptions of risk, and subjective norms about continued purchasing on the Internet. Findings show that consumers’ attitude towards purchasing on the Internet is an influential factor on intentions to continue Internet purchasing. Additionally, compatibility and result demonstrability are influential factors on attitudes towards this behavior. The study contributes to the important area of technology post adoption behavior.

Emerging work practice with a telehealth stethoscope

We investigated the collaboration of ten doctor-nurse pairs with a prototype digital telehealth stethoscope. Doctors could see and hear the patient but could not touch them or the stethoscope. The nurse in each pair controlled the stethoscope. For ethical reasons, an experimenter stood in for a patient. Each of the ten interactions was video recorded and analysed to understand the interaction and collaboration between the doctor and nurse. The video recordings were coded and transformed into maps of interaction that were analysed for patterns of activity. The analysis showed that as doctors and nurses became more experienced at using the telehealth stethoscope their collaboration was more effective. The main measure of effectiveness was the number of corrections in stethoscope placement required by the doctor. In early collaborations, the doctors gave many corrections. After several trials, each doctor and nurse had reduced corrections and all pairs reduced their corrections. The significance of this research is the identification of the qualities of effective collaboration in the use of the telehealth stethoscope and telehealth systems more generally.