A ferric molybdenum phosphate with a tunnel: hydrothermal synthesis and structure of (NH3CH2CH2NH3)(2)center dot(NH3CH2CH2NH2)(3)center dot Na center dot[Fe2Mo12O30(PO4)(HPO4)(4)(H2PO4)(3)]center dot 7H(2)O

A new ferric molybdenum phosphate containing a tunnel structure and crystallographically different clusters has been hydrothermally synthesized and structurally characterized by single crystal X-ray diffraction. A probe reaction of the oxidation of acetaldehyde with H2O2 using the tide compound as catalyst was carried out in a liquid-solid system, showing that the title compound had high catalytic activity in the reaction. (C) 1998 Elsevier Science S.A. All rights reserved.

Recovery of Ce(IV) and Th(IV) from rare earths(III) with Cyanex 923

Solvent extraction of Ce(IV), Th(IV) with Cyanex 923 in n-hexane from sulphuric acid medium was studied with the dependence of the extraction on acidity and temperature being investigated. The Ce(IV) and Th(IV) extraction mechanism was proposed by slope analysis and the IR spectra of purified Cyanex 923 saturated with Ce(IV) were employed to determine the composition of the Ce(IV) complex. The equilibrium constant and thermodynamic functions of Th(IV) extraction were calculated and the characteristics of the stripping of Ce(IV), Th(IV) from the loaded organic phase were studied. (C) 1998 Elsevier Science B.V. All rights reserved.

Lanthanide binuclear macrocyclic complexes as synthetic enzymes for the cleavage of DNA

Lanthanide binuclear complexes can accelerate the cleavage of pUC19 plasmid DNA, yielding predominantly linear form. The saturation kinetics of the cleavage of pUC19 was studied. The observed rates with lanthanide binuclear complexes showed the expected increase with the catalyst concentration. The rate of cleavage is greater than that of lanthanide ions alone. (C) 1998 Elsevier Science B.V. All rights reserved.

Electrocatalytic oxidation of methanol at the titanium oxide electrode modified with Pt microparticles

The electrocatalytic oxidation of methanol at the Titanium oxide (TiOx, x<2) film modified with Pt microparticles has been studied. The results show that the modified electrodes exhibit a significant electrocatalytic activity and good stability for the oxidation of methanol. Under the optimal conditions, the peak current density at 0.58 V for the oxidation of methanol in the positive-going sweep is about 526 mA/cm(2) at the scan rate of 5 mV/s in 0.5 mol/L CH3OH and 0.5 mol/L H2SO4 solution and the over potential of the methanol oxidation at the modified electrode increases about 30 similar to 40 mV after 70 minutes at the current density of 100 mA/cm(2) and 50 mA/cm(2). The enhanced electrocatalytic activity and good stability are ascribed to the high dispersion of Pt microparticles in and on the TiOx film and the synergistic effect between Pt microparticles and TiOx.

Separation of Ce(IV) and RE(III) with hollow fiber membrane-based extraction

Separation of Ce(IV) and RE(III) was investigated by hollow fiber membrane-based extraction with contercurrent recirculating operation. The mass transfer coefficients of Ce(IV) and RE(III) and the effective factors to them were tested. The results show the mass transfer coefficient of Ce(IV) is larger than that of RE(III), and their mass transfer mechanism is different. The mass transfer of Ce(IV) was controlled by the resistance in water critical layer due to its more rapid interfacial reaction rate and larger distribution coefficient, which was different from RE(III) mass transfer with a slow interfacial reaction rate and small distribution coefficient. Ce(IV) was separated from the mixed solution of Ce(IV) and RE(III) by means of the difference of their mass transfer rates.

Bulk modulus of ternary chalcopyrite A(I)B(III)C(2)(VI) and A(II)B(IV)C(2)(V) semiconductors

Based on the complex crystal chemical bond theory, the formula of Liu and Cohen's, which is only suitable for one type of bond, has been extended to calculate the bulk modulus of ternary chalcopyrite A(I)B(III)C(2)(VI) and A(II)B(IV)C(2)(V) which contains two types of bonds. The calculated results are in fair agreement with the previous theoretical values reported and experimental values. (C) 1998 Elsevier Science Ltd. All rights reserved.

Synthesis and structure of [NH4](4)H[(PMo8V4V2O42)-V-IV-O-V].24H(2)O

[NH4](4)H[(PMo8V4V2O42)-V-IV-O-V] . 24H(2)O has been hydrothermally synthesized from ammonium vanadate and sodium molybdate in aqueous solution by adding phosphorous acid, and its structure determined by single crystal X-ray analysis. The heteropoly molybdovanadophosphate anion is a bicapped 'pseudo-Keggin' polyanion, two vanadium atoms are distributed at two 'capping' metal atom positions and other four vanadium atoms randomly distributed at eight metal atom positions. (C) 1998 Elsevier Science Ltd. All rights reserved.

Synthesis and structural characterization of V(IV) and V(V) containing mixed-valence heteropolytungstogermanates

V(IV) and V(V) containing mixed-valence heteropolytungstogermanates have been prepared by controlled potential reduction of corresponding GeW9V3O407-, their electronic spectra have been recorded. The ESR spectra of one-electron-reduced anions in solution at 340K consist of more than 40 equally spaced lines, showing that the three VO6 octahedra in both alpha- and beta-forms are corner-shaped and one of the bridging oxygen atoms is protonated at pH 4.7.

Synthesis, properties and crystal structure of a heteropoly compound containing titanium

K4H2CoW12O40. 2Ti02 . 9H(2)O crystallizes from an aqueous solution of Na2WO4, Co(OAc)(2) and Ti(SO4)(2). The compound has very similar i.r. and u.v. spectra to those of [CoW12O40](6-) and [CoW11TiO40](8-) but its polarographic behaviour is different from that of [CoW11TiO40](8-) and exhibits only reduction of tungsten(VI). A single crystal structural analysis indicates that this compound consists of the heteropolyanion [CoW12O40](6-), titanium-oxygen chain, potassium ions and water molecules.

Preparation of TiO2 Film through Hydrolysis of Titanium Butoxide and Interaction between Sensitizing Dyes and the Film

A method of preparation of stable, homogeneous and controlled thickness TiO2 film through hydrolysis of Ti(OC4H(9))(4) is introduced in detail. The structure and property of the film have been investigated by means of SEM and FT-IR techniques. The strong quenching effect between sensitizing dyes and TiO2 film is observed in their fluorescence spectra.

Enzymatic degradation of poly(epsilon-caprolactone) film in phosphate buffer solution containing lipases

The enzymatic degradation of poly(epsilon-caprolactone) (PCL) films in phosphate buffer solution containing lipases has been studied by DSC, WAXD and SEM. Three lipases, pseudomonas lipase (PS), porcine pancreatic lipase (PP), and candida cylindracea lipase (AY), were used. The results showed that the degradation of PCL films in phosphate buffer solution containing PP or AY was very slow: no weight loss could be found within 1 week. However, PCL film could degrade rapidly and completely within 4 days in phosphate buffer solution containing PS lipase. (C) 1997 Elsevier Science Limited.

Lanthanide metal complexes for the hydrolysis of ribonucleoside 3',5'-cyclic phosphate and deoxyribonucleoside 3',5'-cyclic phosphate

Ytterbium(III) and praseodymium(III) complexes of 2-carboxyethylgermanium sesquioxide (Ge-132) can hydrolyze the phosphodiester linkage of 3',5'-cyclic adenosine monophosphate (cAMP) and 3',5'-cyclic deoxyadenosine monophosphate (dcAMP). Both cAMP and dcAMP are hydrolyzed with high selectivity, yielding predominantly 3'-monophosphates. The selectivity and activity for hydrolyzing cAMP and dcAMP by lanthanide metal(III) complexes and lanthanide metal ions are compared.

Polymer-supported titanium catalysts for syndiotactic polymerization of styrene

Poly(styrene-co-acrylamide) (PSAm)-titanium complexes (PSAm . Ti) were prepared and characterized. It is found that the coordination number of acrylamide (Am) to Ti in the complexes is strongly dependent on Am content in PSAm, but not on [Am]/[Ti] ratio in the feed. The infrared and x-ray photoelectron spectra suggest that the polymer-supported complexes possess the structure [GRAPHICS] The catalytic behavior of the complexes in styrene polymerization is described. The catalytic activity is markedly affected by [Al]/[Ti] ratio in the complexes. C-13 NMR, IR, and DSC data indicate that the polystyrene obtained with PSAm . Ti/MAO (MAO = methylaluminoxane) is highly syndiotactic. Use of Et(3)Al and i-Bu(3)Al in place of MAO gives atactic polystyrene. The activities of the various aluminum compounds used as the cocatalysts decrease in the order: MAO > Et(3)Al > i-Bu(3)Al. The polymer-supported complexes show relatively high activity even after the complexes had been exposed to air for 19 h or higher polymerization temperature. (C) 1996 John Wiley & Sons, Inc.

A new phosphate, KMgY(PO4)(2), isostructural with xenotime

A new phosphate, KMgY(PO4)(2), isostructural with xenotime, was firstly reported in detail. It crystallizes in tetragonal system with space group I4(1)/amd (No. 141). The cell parameters were obtained from X-ray powder diffraction data with a=0.6886, c=0.6025 nm, 2=2. The proposed structure of KMgY(PO4)(2) was further confirmed by its vibrational spectra, IR and Raman spectra, which were also compared with those of iso-structural YPO4.

STUDIES ON THE PEROVSKITE-TYPE MIXED CATALYSTS OF TITANIUM SYSTEM FOR OXIDATIVE COUPLING OF METHANE - THE INFLUENCE OF CALCINATION TEMPERATURE

The correlations of the calcination temperature, structure and catalytic activity for the oxidative coupling of methane on the LiLa0.5Ti0.5O2+lambda catalysts whose main phase and major active phase is Perovskite-type ternary complex oxide LaTi1-yLiyO3-lambda have been studied. The surface and bulk structures of the catalysts were characterized by means of XRD, XPS, IR, BET and so on, The results cleary indicated that the effect of calcination temperature on the activity for the oxidative coupling of methane is twofold. On one hand, it is favorable for Li+ substitution for Ti3+ to enter into the lattice of LaTiO3 and produce more oxygen vacancies in which active oxygens are formed; however, excessively high calcination temperature make the amount of Li+ substitution for Ti3+ lower, due to a little change of structure or phases for the catalyst. On the other hand, the conversion of CH4 drops because of the decrease of surface area, when the calcination temperature is raised.