I. Anisotropy and crystal structure of ferromagnetic thin films. II. Investigations into magnetic microstructure by Lorentz microscopy

The induced magnetic uniaxial anisotropy of Ni-Fe alloy films has been shown to be related to the crystal structure of the film. By use of electron diffraction, the crystal structure or vacuum-deposited films was determined over the composition range 5% to 85% Ni, with substrate temperature during deposition at various temperatures in the range 25° to 500° C. The phase diagram determined in this way has boundaries which are in fair agreement with the equilibrium boundaries for bulk material above 400°C. The (α+ ɤ) mixture phase disappears below 100°C.

The measurement of uniaxial anisotropy field for 25% Ni-Fe alloy films deposited at temperatures in the range -80°C to 375°C has been carried out. Comparison of the crystal structure phase diagram with the present data and those published by Wilts indicates that the anisotropy is strongly sensitive to crystal structure. Others have proposed pair ordering as an important source of anisotropy because of an apparent peak in the anisotropy energy at about 50% Ni composition. The present work shows no such peak, and leads to the conclusion that pair ordering cannot be a dominant contributor.

Width of the 180° domain wall in 76% Ni-Fe alloy films as a function of film thickness up to 1800 Å was measured using the defocused mode of Lorentz microscopy. For the thinner films, the measured wall widths are in good agreement with earlier data obtained by Fuchs. For films thicker than 800 Å, the wall width increases with film thickness to about 9000 Å at 1800 Å film thickness. Similar measurements for polycrystalline Co films with thickness from 200 to 1500 Å have been made. The wall width increases from 3000 Å at 400 Å film thickness to about 6000 Å at 1500 Å film thickness. The wall widths for Ni-Fe and Co films are much greater than predicted by present theories. The validity of the classical determination of wall width is discussed, and the comparison of the present data with theoretical results is given.

Finally, an experimental study of ripple by Lorentz microscopy in Ni-Fe alloy films has been carried out. The following should be noted: (1) the only practical way to determine experimentally a meaningful wavelength is to find a well-defined ripple periodicity by visual inspection of a photomicrograph. (2) The average wavelength is of the order of 1µ. This value is in reasonable agreement with the main wavelength predicted by the theories developed by others. The dependence of wavelength on substrate deposition temperature, alloy composition and the external magnetic field has been also studied and the results are compared with theoretical predictions. (3) The experimental fact that the ripple structure could not be observed in completely epitaxial films gives confirmation that the ripple results from the randomness of crystallite orientation. Furthermore, the experimental observation that the ripple disappeared in the range 71 and 75% Ni supports the theory that the ripple amplitude is directly dependent on the crystalline anisotropy. An attempt to experimentally determine the order of magnitude of the ripple angle was carried out. The measured angle was about 0.02 rad. The discrepancy between the experimental data and the theoretical prediction is serious. The accurate experimental determination of ripple angle is an unsolved problem.

Determination of water quality in lakes by biological indices

Some problems of evaluation of water quality by biological indices which can be applied in the practice of ecological monitoring on water bodies are considered in this report. Taking into account, that ecological monitoring is the most urgent for large lakes, situated in civilised (urbanised) and (or) agrarian landscapes the corresponding problems will be considered mainly in conformity with large deep lakes of temperate latitudes. The aim is a general evaluation of some of the methods from the point of view of their possible application for monitoring on large water bodies.

Recent progress in the identification and determination of freshwater phytoplankton in the natural environment

The biomass of the phytoplankton and its composition is one of the most important factors in water quality control. Determination of the phytoplankton assemblage is usually done by microscopic analysis (Utermöhl's method). Quantitative estimations of the biovolume, by cell counting and cell size measurements, are time-consuming and normally are not done in routine water quality control. Several alternatives have been tried: computer-based image analysis, spectral fluorescence signatures, flow cytometry and pigment fingerprinting aided by high performance liquid chromatography (HPLC). The latter method is based on the fact that each major algal group of taxa contains a specific carotenoid which can be used for identification and relative quantification of the taxa in the total assemblage. This article gives a brief comparative introduction to the different techniques available and presents some recent results obtained by HPLC-based pigment fingerprinting, applied to three lakes of different trophic status. The results show that this technique yields reliable results from different lake types and is a powerful tool for studying the distribution pattern of the phytoplankton community in relation to water depth. However, some restrictions should be taken into account for the interpretation of routine data.

Determinação de clorobenzenos em água por cromatografia de fase gasosa com headspace

As preocupações com o meio ambiente em particular com a água, adquirem especial importância, porque as demandas estão se tornando cada vez maiores, sob o aspecto crescente da população e das atividades industriais. Quando se fala em água subterrânea, a primeira ideia que surge é que ela seja potável. Mas nem sempre isso é uma verdade. Em área urbana, os crescentes números de problemas devido a contaminação, na maioria das vezes por vazamentos de combustíveis oriundos dos tanques de armazenamento dos postos de gasolina. Sem falar nas indústrias que também oferecem potencial risco de contaminação para esses corpos hídricos e são pouco divulgadas. O presente trabalho tem como foco determinar os compostos clorobenzenos por cromatografia de fase gasosa com headspace (CG-HS) em matriz água e validar a metodologia. A metodologia usada neste estudo foi cromatografia de fase gasosa com headspace (CG HS), por ser uma técnica excelente e sensível e é utilizada para determinar compostos voláteis em baixas concentrações. Os dados obtidos foram tratados estatisticamente de modo avaliar a seletividade, os limites de detecção e quantificação, a faixa linear de trabalho, a linearidade e a recuperação. As recuperações variam de 80 a 110%, os coeficientes de variação obtidos foram menor que 20%, todas as substâncias estudadas apresentaram linearidade na faixa de trabalho de 0,8 a 100g.L-1. Foram estudadas 10 amostras de água subterrânea do Município do Rio de Janeiro e nas amostras analisadas foram encontrados todos os compostos em estudo, com faixa de concentração: monoclorobenzeno (<0,8 a 2,988g.L-1); 1,3-diclorobenzeno (<0,8 a 23,067g.L-1); 1,4-diclorobenzeno (nd a 16,160g.L-1); 1,2-diclorobenzeno (<0,8 a 48,685g.L-1); 1,3,5-triclorobenzeno (<0,8 a 21,900g.L-1); 1,2,4-triclorobenzeno (1,007 a 183,808g.L-1) e 1,2,3-triclorobenzeno (<0,8 a 126,886g.L-1)

A wideband sensitive holographic photopolymer

A novel wideband sensitive dry holographic photopolymer sensitized by rose bengal (RB) and methylene blue (MB) is fabricated, the holographic storage characteristics of which are investigated under different exposure wavelengths. The result shows that the sensitive spectral band exceeds 200 nm in visible light range, the maximum diffraction efficiency under different exposure wavelengths is more than 40% and decreases with the decrease of exposure wavelength, the exposure sensitivity is not change with the exposure wavelength. This photopolymer is appropriate for wavelength multiplexing or multi-wavelength recording in digital holographic storage.

A humidity-resistant highly sensitive holographic photopolymerizable dry film

A new humidity-resistant highly sensitive acrylamide-based photopolymeric holographic recording material has been developed. The photopolymer is resistant to the humidity of environment. Diffraction efficiencies near 50% are obtained with exposure energy of 60 mJ/cm(2) in materials of 150 mu m. thickness. Diphenyl iodonium chloride is added to the material and can increase the exposure sensitivity by a factor of more than 4 (to about 28 mJ/cm(2)). An image has been successfully stored in the material with a small distortion. (C) 2005 Elsevier B.V. All rights reserved.

Determination and analysis of the optical constants of thin films of nickel(II) and copper(II) hydrazone complexes by spectroscopic ellipsometry

Thin films of four nickel(II) and copper(II) hydrazone complexes, which will hopefully be used as recording layers for the next-generation of high-density recordable disks, were prepared by using the spin-coating method. Absorption spectra of the thin films on K9 optical glass substrates in the 300-700 nm wavelength region were measured. Optical constants (complex refractive indices N) and thickness d of the thin films prepared on single-crystal silicon substrates in the 275-675 nm wavelength region were investigated on a rotating analyzer-polarizer scanning ellipsometer by fitting the measured ellipsometric angles (Psi(lambda) and Delta(lambda)) with a 3-layer model (Si/dye film/air). The dielectric functions epsilon and absorption coefficients alpha as a function of the wavelength were then calculated. Additionally, a design to achieve high reflectivity and optimum dye film thickness with an appropriate reflective layer was performed with the Film Wizard software using a multilayered model (PC substrate/reflective layer/dye film/air) at 405 nm wavelength.

LC-MS based methods for phytosterols determination in oenological matrices. Targeted metabolomic study of Rioja grape varieties

221 p.+ anexos

The all-seeing mirror: reflecting on vampires as allegories in socio-culturally sensitive literary works

Esta dissertação tem como objetivo analisar a figura do vampiro na literatura como poderosa ferramenta de leitura e interpretação dos medos e angústias que afligem um determinado espaço sociocultural. Ao olhar para a evolução do vampiro literário através dos séculos dezenove, vinte e vinte e um, notamos que cada uma de suas encarnações difere dramaticamente da anterior, e no que o vampiro é reinventado, ele engaja-se num diálogo pertinente e coerente com questões de seu próprio tempo, nunca perdendo assim sua relevância. Sua existência heterogênea, explicitada na dissertação primariamente através das obras Carmilla, de Sheridan LeFanu, Dracula, de Bram Stoker, Eu Sou a Lenda, de Richard Matheson, Entrevista com o Vampiro, de Anne Rice e Fledgling, de Octavia Butler, e as diferentes questões suscitadas em cada uma dessas obras como a sexualidade, a alteridade e o hibridismo nos levarão ao entendimento de que o vampiro pode potencialmente desempenhar importante função alegórica, tornando-se um espelho da própria humanidade através da qual se sustenta

Méthodes simples de determination du CO2 total et du carbone organique dissous en eau saumâtre

Total CO2 of brackish water (Ebrié lagoon) is measured with a simple method: degassing and trapping CO2 in NaOh solution, the conductivity of which is a function of the trapped CO2 quantity. A relation CO2 versus salinity is deduced; it is nearly the same as the one deduced from CO2 measurements performed from alkalinity. Dissolved organic C is evaluated with a CHN analyser by evaporating 0.5 ml of acidified sample. Variation coefficient is near 10% for the lagoon values.

Precise determination of anomalous scattering factors of Ge by using X-ray resonant scattering

Variations of peak position of the rocking curve in the Bragg case are measured from a Ge thin crystal near the K-absorption edge. The variations are caused by a phase change of the real part of the atomic scattering factor. Based on the measurement, the values of the real part are determined with an accuracy of better than 1%. The values are the most reliable ones among those reported values so far as they are directly determined from the normal atomic scattering factors.