Feasibility of oncoplastic techniques in the surgical management of locally advanced breast cancer

Background: Locally advanced breast cancer (LABC) is still common in developing countries. The association between neoadjuvant chemotherapy (NC) and oncoplastic surgery (OS) might provide an oncological treatment with satisfactory aesthetic results.Purpose: The goal was to demonstrate if oncoplastic surgical techniques can be utilized to treat LABC which was submitted to neoadjuvant chemotherapy.Methods: This prospective clinical trial included breast cancer patients, clinical stage III, who underwent established NC regimen. All patients underwent preoperative planning to control the tumor size and to define the surgical technique. A detailed analysis of the pathological specimen was performed.Results: 50 patients were assessed and surgically treated. Tumor size ranged from 3.0 to 14.0 cm (median 6.5 cm). Pathologic response was rated as stable, progressive, partial response, and complete response in 10%, 8%, 80% and 2% of the cases, respectively. Seventeen (34%) patients were submitted to OS. No patient had positive margins. Skin involvement was presented in 36% of pathologic specimen.Conclusions: Oncoplastic surgical techniques for selected patients decrease the rates of radical surgery despite large tumors. (www.clinicaltrials.gov, NCT00820690). (C) 2012 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Avaliação da expressão da proteína bcl-2 no carcinoma de mama: estudo em punção aspirativa por agulha fina; correlação com grau histológico em espécimes cirúrgicos correspondentes

INTRODUÇÃO: O gene bcl-2 codifica uma proteína envolvida no processo de controle da apoptose. Inicialmente descrito em linfomas e posteriormente em tecidos epiteliais, sua expressão é freqüentemente encontrada em carcinomas de mama, associada a fatores de prognóstico favorável. Como a punção aspirativa por agulha fina (PAAF) tem sido utilizada como um método confiável na investigação de carcinomas de mama, acessamos a expressão de bcl-2 em material assim obtido e correlacionamos sua positividade com o grau histológico, avaliado em material cirúrgico correspondente, das respectivas pacientes, seguindo a classificação de SBR (Scarff, Bloom e Richardson). OBJETIVOS: Avaliar a expressão de bcl-2 em PAAF e correlacionar com grau histológico. METODOLOGIA: A positividade do bcl-2 foi analisada, por imunocitoquímica, em 118 casos consecutivos de PAAF e correlacionada com grau histológico em material cirúrgico correspondente, segundo classificação de SBR. RESULTADOS: A positividade para bcl-2 foi encontrada em 77 de 118 casos de PAAF (65,25%) e foi inversamente proporcional ao grau histológico (84,37%, p = 0,0022). CONCLUSÃO: A expressão de bcl-2 em PAAF correlaciona-se com fator de bom prognóstico. O índice de positividade encontrado, assim como a correlação inversa com grau histológico, está de acordo com dados publicados previamente. O fácil e rápido manejo do material obtido por PAAF permite a aplicação de técnicas complementares, de maneira confiável, como demonstra este estudo. A positividade do bcl-2 correlacionada com baixo grau histológico, assim como com outros fatores de bom prognóstico, pode, no futuro, proporcionar informação preditiva e prognóstica para pacientes candidatas a tratamento quimioterápico neo-adjuvante.

Fatores associados à recorrência da infecção do trato urinário em crianças

OBJETIVOS: verificar a freqüência de infecção urinária recorrente (ITU) e avaliar os fatores associados à recorrência da ITU em crianças. MÉTODOS: estudo retrospectivo de 95 pacientes com seguimento de um ano (68 meninas e 27 meninos, mediana de idade três anos). As variáveis estudadas foram: sexo, idade, febre, constipação, tipo de bactéria, refluxo vésico-ureteral (RVU), anormalidades na cintilografia renal com ácido dimercaptosuccínico (DMSA). RESULTADOS: infecção urinária recorrente ocorreu em 49,5% crianças (19 com trato urinário normal, 19 com RVU e 9 com estenose da junção pielocalicial). Comparando o grupo com ITU recorrente com o grupo sem ITU recorrente não se encontrou diferença significativa entre sexos, presença de febre, constipação e anormalidades na cintilografia renal com DMSA. A ITU recorrente foi significativamente maior nas crianças com um ano ou menos, naquelas menores de dois anos com RVU, nas com bactéria diferente da Escherichia coli e sem profilaxia antibacteriana. Os fatores de risco significativos para a recorrência ITU foram idade < 2 anos (OR = 3,83) e refluxo vésico-ureteral (OR = 4,95). CONCLUSÕES: por causa da elevada freqüência de ITU recorrente é importante o seguimento regular de grupo de crianças com fatores de risco para ITU recorrente.

Cicatrizes renais em crianças com refluxo vesicoureteral primário

OBJETIVO: verificar a incidência de cicatrizes renais em crianças com refluxo vesicoureteral primário, comparando com sexo, idade no diagnóstico, infecção febril, grau do refluxo e tipo de bactéria. MÉTODOS: estudo retrospectivo de 58 crianças, com idade entre dois meses a 11 anos, apresentando refluxo vesicoureteral primário, detectado pela uretrocistografia miccional, após episódio documentado de infecção urinária. Diagnóstico de cicatriz renal foi obtido pela cintilografia com DMSA cinco meses, no mínimo, após o tratamento da infecção urinária; em 40 crianças, o exame foi repetido após período de seis meses a seis anos. RESULTADOS: 45 crianças (77,6%) eram meninas e 13 (22,4%) eram meninos, 51,7% com idade menor ou igual a 2 anos. A incidência de cicatriz renal foi de 55,2%. Houve maior proporção significativa de cicatrizes renais no sexo feminino, na presença do sintoma febre e no refluxo dilatado (III, IV e V). Presença de febre e sexo feminino foram fatores de risco significativos na ocorrência de cicatriz renal (febre - OR= 6,19, e sexo feminino - OR= 4,12). Houve tendência da presença de cicatriz renal em maiores de 2 anos. O intervalo entre início dos sintomas e a primeira consulta foi maior nas crianças com cicatrizes renais. Novas cicatrizes renais foram observadas em 12,5%. CONCLUSÃO: a presença de febre e sexo feminino foram fatores de risco para presença de cicatrizes renais, principalmente no refluxo vesicoureteral dilatado. A alta incidência de cicatrizes renais neste estudo pode estar relacionada ao retardo do diagnóstico do refluxo vesicoureteral.

Retroperitoneoscopic renal biopsy in children

OBJECTIVE: We present our experience in a series of 17 consecutive pediatric patients submitted to retroperitoneal laparoscopic renal biopsy. MATERIALS and METHODS: Retroperitoneal laparoscopic renal biopsy (LRB) was performed in 5 boys and 12 girls. Mean age was 8.1 years and age range from 2 to 12. Two or three trocars were used to expose the inferior pole of the kidney, remove enough cortical parenchymal specimen and fulgurate the biopsy site. Assessment included surgical time, estimated blood loss, hospitalization period, analgesia requirements, complications and number of glomeruli present in the specimen. RESULTS: LRB was successfully performed in all 15 patients (88%). In two cases, LRB was not possible to be performed. One patient was converted to a transperitoneal laparoscopy due to tear in the peritoneum. The other patient had had previous abdominal surgery and, during retroperitoneal balloon dilation, the peritoneum was opened and the open biopsy was performed. A third patient had postoperatively a perirenal hematoma, which was solved spontaneously. Complication rate was 17.6% (3/17 cases). Mean operative time was 65 minutes, while mean estimated blood loss was 52 mL, mean hospital stay was 2.2 days and mean analgesic requirement was 100 mg of tramadol. The mean number of glomeruli present in the specimen was 60. CONCLUSION: Retroperitoneal laparoscopic renal biopsy in children is a simple, safe. Bleeding is still the most common complication. However, direct vision usually allows a safe control of this drawback. In our institution, laparoscopic approach is the chosen procedure in pediatric patients older than one - year - old.

Isolation of Staphylococcus epidermidis from inflamed upper respiratory tract of an orange-spined hairy dwarf porcupine (Sphiggurus villosus)

The orange-spined hairy dwarf porcupine (Sphiggurus villosus) is a rodent species common in most parts of South America, and little is known about the pathologies that can afflict it. A specimen was delivered at the Wildlife Research and Medical Center (CEMPAS), School of Veterinary Medicine and Animal Husbandry, UNESP, Botucatu, SP, Brazil. The animal showed intense apathy, with purulent secretion in the nasal cavity and fracture of the lumbar spine. Due to the unfavorable prognosis, the porcupine was euthanized and microbiological culture of nasal discharge showed Staphylococcus epidermidis. The antimicrobial resistance test revealed sensitivity to all tested antimicrobials (ampicillin, oxacillin, tetracycline, penicillin G, neomycin, cephalexin, gentamicin, enrofloxacin, ciprofloxacin, cotrimoxazol, cefoxitin and cephalothin). This bacterium is part of the nasal flora of humans and other animals, and may cause infection under certain conditions. In the present study, the infection and colonization by S. epidermidis was the probable cause of the inflammatory process. The sensitivity to all tested antimicrobials suggests that this strain has not been previously exposed to such drugs.

Histometric analysis of ligature-induced periodontitis in rats: a comparison of histological section planes

The purpose of this study was to analyze the histometry of ligature-induced periodontitis in rats at different histological section depths. Sixteen male adult Wistar rats were randomly assigned to two groups: ligature and control. In the ligature group, rats received a sterile 4/0 silk ligature around the maxillary right 2nd molar. Thirty serial sections containing the 1st and 2nd molars, in which the coronal and root pulp, cementoenamel junction (CEJ) in the mesial side of the 2nd molar, interproximal alveolar bone and connective fiber attachment were clearly visible, were selected for histometric analysis. The histological sections were clustered in groups of 10 sections corresponding the buccal (B), central (C) and lingual (L) regions of the of periodontal tissue samples. The distance between the CEJ in the mesial side of the 2nd molar and the attached periodontal ligament fibers (CEJ-PL) as well as the distance between the CEJ and the alveolar bone crest (CEJ-BC) were determined. From CEJ-PL and CEJ-BC distances measured for each specimen, the measurements obtained in the B, L and C regions were recorded individually and together. Data were submitted to statistical analysis. Significant differences (p<0.001) were observed between the control and ligature groups regarding CEJ-PL (0.05 mm and 0.26 mm, respectively) and CEJ-BC (0.47 mm and 0.77 mm, respectively) measurements. Regarding the depth of the buccal, central and lingual planes, the means of CEJ-PL and CEJ-BC of both groups showed no statistically significant differences (p>0.05). In conclusion, the selection of 10 serial sections of the central region of periodontal tissue samples at any depth can be considered as representative for the evaluation of periodontal ligament fiber attachment and bone loss in ligature-induced periodontitis in rats.

Colonisation of soft lining materials by micro-organisms

Objective:This study evaluated the in vitro adherence of pathogenic micro-organisms, Candida albicans, Staphylococcus aureus and Pseudomonas aeruginosa, to soft lining materials and their inhibitory effect on these micro-organisms.Materials and Methods:To measure adherence, specimens of Molloplast B and Ufi Gel P were inoculated [107 colony-forming units per millimetre (cfu/ml)] with TSB media containing the micro-organisms. To determine the number of micro-organisms in the 10-2-10-5 dilutions, 25 mu l of the suspension were transferred to plates of selective media. Colony counts of each specimen were quantified (cfu/ml). The surface roughness was measured with a perfilometer to assess the relationship between the adherence of micro-organisms and surface roughness of each material. For the inhibition test, specimens of materials were placed in agar plates inoculated individually with the micro-organisms. After 48 h, the inhibition zones around the specimens were measured.Results:None of the materials exhibited inhibition zones. The number of cfu/ml of S. aureus and P. aeruginosa were significantly greater than C. albicans for both materials. The Ufi Gel P exhibited greater adherence of C. albicans than Molloplast B. No correlation was observed between the adherence of micro-organisms and surface roughness.Conclusion:The surface roughness of the materials is not the only factor governing micro-organism adherence.

Etch and rinse versus self-etching adhesives systems: Tridimensional micromechanical analysis of dentin/adhesive interface

The purpose of this study was to evaluate stress distribution in the hybrid layer produced by two adhesive systems using three-dimensional finite element analysis (FEA). Four FEA models (M) were developed: Mc, a representation of a dentin specimen (41 x 41 x 82 mu m) restored with composite resin, exhibiting the adhesive layer, hybrid layer (HL), resin tags, peritubular dentin, and intertubular dentin to simulate the etch-and-rinse adhesive system; Mr, similar to Mc, with lateral branches of the adhesive; Ma, similar to Mc, however without resin tags and obliterated tubule orifice, to simulate the environment for the self-etching adhesive system; Mat, similar to Ma, with tags. A numerical simulation was performed to obtain the maximum principal stress (sigma(max)). The highest sigma(max) in the HL was observed for the etch-and-rinse adhesive system. The lateral branches increased the sigma(max) in the HL. The resin tags had a little influence on stress distribution with the self-etching system. (C) 2012 Elsevier Ltd. All rights reserved.

A comparison of profilometer and AutoCAD software techniques in evaluation of implant angulation in vitro

Purpose: The aim of this study was to compare 2 different methods of assessment of implants at different inclinations (90 degrees and 65 degrees)-with a profilometer and AutoCAD software. Materials and Methods: Impressions (n = 5) of a metal matrix containing 2 implants, 1 at 90 degrees to the surface and 1 at 65 degrees to the surface, were obtained with square impression copings joined together with dental floss splinting covered with autopolymerizing acrylic resin, an open custom tray, and vinyl polysiloxane impression material. Measurement of the angles (in degrees) of the implant analogs were assessed by the same blinded operator with a profilometer and through analysis of digitized images by AutoCAD software. For each implant analog, 3 readings were performed with each method. The results were subjected to a nonparametric Kruskal-Wallis test, with P <= .05 considered significant. Results: For implants perpendicular to the horizontal surface of the specimen (90 degrees), there were no significant differences between the mean measurements obtained with the profilometer (90.04 degrees) and AutoCAD (89.95 degrees; P=.9142). In the analyses of the angled implants at 65 degrees in relation to the horizontal surface of the specimen, significant differences were observed (P=.0472) between the mean readings with the profilometer (65.73 degrees) and AutoCAD (66.25 degrees). Conclusions: The degrees of accuracy of implant angulation recording vary among the techniques available and may vary depending on the angle of the implant. Further investigation is needed to determine the best test conditions and the best measuring technique for determination of the angle of the implant in vitro.

Effect of Flasking and Polymerization Techniques on Tooth Movement in Complete Denture Processing

Purpose: The purpose of this study was to compare the artificial tooth positional changes following the flasking and polymerization of complete dentures by a combination of two flasking methods and two polymerization techniques using computer graphic measurements.Materials and Methods: Four groups of waxed complete dentures (n = 10) were invested and polymerized using the following techniques: (1) adding a second investment layer of gypsum and conventional water bath polymerization (Control), (2) adding a second investment layer of gypsum and polymerization with microwave energy (Gyp-micro), (3) adding a second investment layer of silicone (Zetalabor) and conventional polymerization (Silwater), and (4) adding a second investment layer of silicone and polymerization with microwave energy (Silmicro). For each specimen, six segments of interdental distances (A to F) were measured to determine the artificial tooth positions in the waxed and polymerized stages using software program AutoCad R14. The mean values of the changes were statistically compared by univariate ANOVA with Tukey post-hoc test at 5% significance.Results: There were no significant differences among the four groups, except for segment D of the Silmicro group (-0.004 +/- 0.032 cm) in relation to the Gypwater group (0.044 +/- 0.031 cm) (p < 0.05), which presented, repectively, expansion and shrinkage after polymerization.Conclusions: Within the limitations of this study, it was concluded that although the differences were not statistically significant, the use of a silicone investment layer when flasking complete dentures resulted in the least positional changes of the artificial teeth regardless of the polymerization technique.

Influence of Different Ceramics on Resin Cement Knoop Hardness Number

This study evaluated: 1) the effect of different ceramics on light attenuation that could affect microhardness, measured as the Knoop Hardness Number (KHN), of a resin cement immediately and 24 hours after polymerization and 2) the effect of different activation modes (direct light-activation, light activation through ceramics and chemical activation) on the KHN of a resin cement.Resin cement Rely X ARC (3M ESPE) specimens 5.0 mm in diameter and 1.0 nun thick were made in a Teflon mold covered with a polyester film. The cement was directly light activated for 40 seconds with an XL 2500 curing unit (3M ESPE) with 650 mW/cm(2), light activated through ceramic discs of Duceram Plus (DeguDent), Cergogold (DeguDent), IPS Empress (Ivoclar), IPS Empress 2 (Ivoclar), Procera. (NobelBiocare), In Ceram Alumina (Vita) and Cercon (DeguDent), having a 1.2 mm thickness or chemically activated without light application. The resin cement specimens were flattened, and KHN was obtained using an HMV 2 microhardness tester (Shimadzu) with a load of 50 g applied for 15 seconds 100 pin from the irradiated surface immediately and after storage at 37 degrees C for 24 hours. Ten measurements were made for each specimen, with three specimens for each group at each time. The data were submitted to ANOVA and Tukey's test (p=0.05). The KHN of the resin cement was not only affected by the mode of activation, but also by the post-activation testing time. The mean KHN of the resin cement for chemical activation and through all ceramics showed statistically significant lower values compared to direct activation immediately and at 24 hours. The KHN for 24 hours post-activation was always superior to the immediate post-activation test except with direct activation. The most opaque ceramics resulted in the lowest KHN values.

Influence of Investment, Disinfection, and Storage on the Microhardness of Ocular Resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alteration of blue pigment in artificial iris in ocular prosthesis: Effect of paint, drying method and artificial aging

The artificial iris is the structure responsible for the dissimulation and aesthetics of ocular prosthesis. The objective of the present study was to evaluate the color stability of artificial iris of microwaveable polymerized ocular prosthesis, as a function of paint type, drying method and accelerated aging. A total of 40 discs of microwaveable polymerized acrylic resin were fabricated, and divided according to the blue paint type ( n = 5): hydrosoluble acrylic, nitrocellulose automotive, hydrosoluble gouache and oil paints. Paints where dried either at natural or at infrared light bulb method. Each specimen was constituted of one disc in colorless acrylic resin and another colored with a basic sclera pigment. Painting was performed in one surface of one of the discs. The specimens were submitted to an artificial aging chamber under ultraviolet light, during 1008 h. A reflective spectrophotometer was used to evaluate color changes. Data were evaluated by 3-way repeated-measures ANOVA and the Tukey HSD test (alpha = 0.05). All paints suffered color alteration. The oil paint presented the highest color resistance to artificial aging regardless of drying method. (C) 2010 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Effect of Different Light-Curing Modes on Degree of Conversion, Staining Susceptibility and Stain's Retention Using Different Beverages in a Nanofilled Composite Resin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)