Accurate real-time feedback of surface EMG during fMRI.

Real-time acquisition of EMG during functional MRI (fMRI) provides a novel method of controlling motor experiments in the scanner using feedback of EMG. Because of the redundancy in the human muscle system, this is not possible from recordings of joint torque and kinematics alone, because these provide no information about individual muscle activation. This is particularly critical during brain imaging because brain activations are not only related to joint torques and kinematics but are also related to individual muscle activation. However, EMG collected during imaging is corrupted by large artifacts induced by the varying magnetic fields and radio frequency (RF) pulses in the scanner. Methods proposed in literature for artifact removal are complex, computationally expensive, and difficult to implement for real-time noise removal. We describe an acquisition system and algorithm that enables real-time acquisition for the first time. The algorithm removes particular frequencies from the EMG spectrum in which the noise is concentrated. Although this decreases the power content of the EMG, this method provides excellent estimates of EMG with good resolution. Comparisons show that the cleaned EMG obtained with the algorithm is, like actual EMG, very well correlated with joint torque and can thus be used for real-time visual feedback during functional studies.

Integrated billing mechanisms in the Internet of Things to support information sharing and enable new business opportunities

The Internet of Things (IOT) concept and enabling technologies such as RFID offer the prospect of linking the real world of physical objects with the virtual world of information technology to improve visibility and traceability information within supply chains and across the entire lifecycles of products, as well as enabling more intuitive interactions and greater automation possibilities. There is a huge potential for savings through process optimization and profit generation within the IOT, but the sharing of financial benefits across companies remains an unsolved issue. Existing approaches towards sharing of costs and benefits have failed to scale so far. The integration of payment solutions into the IOT architecture could solve this problem. We have reviewed different possible levels of integration. Multiple payment solutions have been researched. Finally we have developed a model that meets the requirements of the IOT in relation to openness and scalability. It supports both hardware-centric and software-centric approaches to integration of payment solutions with the IOT. Different requirements concerning payment solutions within the IOT have been defined and considered in the proposed model. Possible solution providers include telcos, e-payment service providers and new players such as banks and standardization bodies. The proposed model of integrating the Internet of Things with payment solutions will lower the barrier to invoicing for the more granular visibility information generated using the IOT. Thus, it has the potential to enable recovery of the necessary investments in IOT infrastructure and accelerate adoption of the IOT, especially for projects that are only viable when multiple benefits throughout the supply chain need to be accumulated in order to achieve a Return on Investment (ROI). In a long-term perspective, it may enable IT-departments to become profit centres instead of cost centres. © 2010 - IOS Press and the authors. All rights reserved.

Generation and characterization of rabbit embryonic stem cells

We described the derivation of four stable pluripotent rabbit embryonic stem cell ( ESC) lines, one ( RF) from blastocysts fertilized in vivo and cultured in vitro and three ( RP01, RP02, and RP03) from parthenogenetic blastocysts. These ESC lines have be

A review of the Chinese species of Crossocheilus, with description of a new species (Ostariophysi : Cyprinidae)

Fishes of the genus Crossocheilus in China is reviewed on the basis of specimens in Kunming Institute of Zoology, Chinese Academy of Sciences. Crossocheilus multirastellus is described from the upper Irrawaddy and upper Salween rivers. It is distinguished from all of its congeners by having two black longitudinal stripes on sides of body, 36-38 lateral line scales, 18-25 gill rakers, anus at midpoint between ventral fin and anal fin insertions, ventral fin extending over anus, a large deep blue rhomboid spot above the pectoral fin, and a straight mouth gape almost equal to head width. There are presently two species of Crossocheilus fishes in China. Crossocheilus bamaensis Fang and Crossocheilus liuchengensis Liang, Liu & Wu are recognized here as members of the genus Sinocrossocheilus.

The nominal invalidity of the cyprinid genus, Parasinilabeo, with descriptions of a new genus and species

The nominal invalidity of the cyprinid genus, Parasinilabeo, with descriptions of a new genus and species. Zoological Studies 40(2): 134-140. A new genus, Pararectoris Su, Yang and Cui, is designated based on the type species, Pararectoris assimilis (Wu a

Taxonomic review of the genus Sinocrossocheilus Wu (Teleostei : Cyprinidae), with a description of four new species

All Sinocrossocheilus species, except S. microstomatus, are reviewed. Four new species, S. labiata, S. papillolabra, S. nigrovittata, and S. longibulla, are described. The genus Sinocrossocheilus differs from other genera of Cyprinidae by the last simple dorsal fin ray being unserrated and unossified, the last unbranched anal fin ray being unserrated and unossified, the 5-branched anal fin rays, the mouth gap being inferior, the rostral cap covering the lower jaw and connecting directly with the lower lip, a row of fleshy lobes on the lower jaw, and a cloudy black spot above the pectoral fin. Sinocrossocheilus labiata is small and has 22 predorsal scales; S. longibulla has a very large air bladder; S. papillolabra possesses a well-developed ventral fin and a wide band covered by fleshy papillae on the lower lip; and S. nigrovittata possesses black longitudinal stripes along the lateral line. Crossocheilus bamaensis and Crossocheilus liuchengensis are transferred to the genus Sinocrossocheilus. Sinocrossocheilus species are endemic to the central and eastern Yunnan-Guizhou Plateau of China, where river systems are anfractuous, including seasonal rivers, cave rivers, underground rivers, and streamlets between mountains. These separated rivers probably provide conditions for the allopatric speciation of the Sinocrossocheilus.

Calculating transport AC losses in stacks of high temperature superconductor coated conductors with magnetic substrates using FEM

In this paper, the authors investigate the electromagnetic properties of stacks of high temperature superconductor (HTS) coated conductors with a particular focus on calculating the total transport AC loss. The cross-section of superconducting cables and coils is often modeled as a two-dimensional stack of coated conductors, and these stacks can be used to estimate the AC loss of a practical device. This paper uses a symmetric two dimensional (2D) finite element model based on the H formulation, and a detailed investigation into the effects of a magnetic substrate on the transport AC loss of a stack is presented. The number of coated conductors in each stack is varied from 1 to 150, and three types of substrate are compared: non-magnetic weakly magnetic and strongly magnetic. The non-magnetic substrate model is comparable with results from existing models for the limiting cases of a single tape (Norris) and an infinite stack (Clem). The presence of a magnetic substrate increases the total AC loss of the stack, due to an increased localized magnetic flux density, and the stronger the magnetic material, the further the flux penetrates into the stack overall. The AC loss is calculated for certain tapes within the stack, and the differences and similarities between the losses throughout the stack are explained using the magnetic flux penetration and current density distributions in those tapes. The ferromagnetic loss of the substrate itself is found to be negligible in most cases, except for small magnitudes of current. Applying these findings to practical applications, where AC transport current is involved, superconducting coils should be wound where possible using coated conductors with a non-magnetic substrate to reduce the total AC loss in the coil. © 2011 Elsevier B.V. All rights reserved.

Deconvolution and elastography based on dimensional ultrasound

This paper is in two parts and addresses two of getting more information out of the RF signal from three-dimensional (3D) mechanically-swept medical ultrasound . The first topic is the use of non-blind deconvolution improve the clarity of the data, particularly in the direction to the individual B-scans. The second topic is imaging. We present a robust and efficient approach to estimation and display of axial strain information. deconvolution, we calculate an estimate of the point-spread at each depth in the image using Field II. This is used as of an Expectation Maximisation (EM) framework in which ultrasound scatterer field is modelled as the product of (a) a smooth function and (b) a fine-grain varying function. the E step, a Wiener filter is used to estimate the scatterer based on an assumed piecewise smooth component. In the M , wavelet de-noising is used to estimate the piecewise smooth from the scatterer field. strain imaging, we use a quasi-static approach with efficient based algorithms. Our contributions lie in robust and 3D displacement tracking, point-wise quality-weighted , and a stable display that shows not only strain but an indication of the quality of the data at each point in the . This enables clinicians to see where the strain estimate is and where it is mostly noise. deconvolution, we present in-vivo images and simulations quantitative performance measures. With the blurred 3D taken as OdB, we get an improvement in signal to noise ratio 4.6dB with a Wiener filter alone, 4.36dB with the ForWaRD and S.18dB with our EM algorithm. For strain imaging show images based on 2D and 3D data and describe how full D analysis can be performed in about 20 seconds on a typical . We will also present initial results of our clinical study to explore the applications of our system in our local hospital. © 2008 IEEE.

Performance of thin film carbon materials and carbon nanotubes as cold cathodes

The field emissions from three different types of carbon films are studied using a Kiethly voltage-current source-measure unit under computer control. The three types of carbon films are : 1) a-C:H:N deposited using an inductively coupled rf PECVD process, where the N content in the films can be as high as 30 at %; 2) cathodic arc deposited tetrahedral amorphous carbon with embedded regions of carbon nanotube and anion structures and 3) unoriented carbon nanotube films on a porous substrate. The films are formed by filtering a solution of nanotubes dispersed in alcohol through the pores and drying.

The practical feasibility of using RFID in a metal environment

Passive Radio Frequency Identification (RFID) has revolutionized the way in which products are identified. This paper considers the effect of metals on the performance of RFID at ultra high frequency (UHF). The paper establishes read patterns in space, highlighting the interference of RF waves due to three different metals, one ferrous and the other two non ferrous, when placed behind a transponder. The effect of thickness of the metal plate is also examined. Different metals have been found to have different interference effects although there are some similarities in their read patterns related to their material properties. Also experiments have been carried out to identify and establish various methods of improving this performance. Finally, differences between performance-measuring parameters, namely attenuating transmitted power and calculating read rate at a fixed attenuation are established and possible reasons of these observations are presented. © 2007 IEEE.

翻译速率与蛋白质二级结构的关系

统计分析了人的119种蛋白质和大肠杆菌的92种蛋白质密码子翻译速率和蛋白质二级结构的关系。据 二密码子片段在不同二级结构中的频数分布，我们发现人和大肠杆菌中翻译速率与蛋白质二级结构之间有一定 关系:高翻译速率时倾向编码。螺旋、不倾向编码线团(coil);低翻译速率时倾向编码线团、不倾向编码。螺旋;R 折叠结构则随翻译速率表现出明显的振荡。同时，密码子的使用在不同片段内一般也是不均匀的:在。螺旋片段 内，结构尾部偏向使用高翻译速率密码子;中部倾向使用中翻译速率密码子;而头部使用的密码子翻译速率偏 低。这样的倾向性不大可能归结为随机起伏的影响。